Explorer not updating websites

Similar Questions

• Windows update website does not work

  Hello...

  I recently had a problem requiring a reinstall instead of XP Pro 32-bit to backrev to SP2. Basically I have been running SP3, but was constantly reminders, insistence, etc to update to IE8, and after continuous pressure, I finally said 'ok' and went ahead with it. And he threw quickly across into itself.

  Accordingly, I did an uninstall of IE8, but concluded that IE7 could no longer work. After checking for a solution and try the patches recommended, nothing has worked, and since I'm at SP3, IE7 could not be uninstalled (this is possible for SP2). There is no information available for SP3 uninstall, so I had finally "repair" XP by doing a reinstall instead of booting from the XP SP2 cd. It worked pretty well, and everything was back to normal, even if I was now running IE6.

  So, I had the ACR IE7 on your site and tried to install it. There is no problem during installation - no message of error - but after the reboot. I was unable to open IE7 anyway. ERGO, I had no choice but to uninstall it. Thank gawd I rarely use IE; nothing else was touched and Firefox & Acoo both work very well.

  To try to resolve the problem of IE7, some "corrections" for "IE7 will not run" involve open IE7 and perform certain tasks. Seems to be quite a task: IE7 will not run, so go ahead and open and... Riiight. Anyway, I don't have the tools of correction for reset and disable add-ons, but unfortunately, they specify that I must first install SP3. No way will reinstall SP3 until I see IE7 work @ SP2; Simply much too, it would mean an extra effort to do a re-install of SP2.

  I'm ready to install other patches, although I noticed that nothing has been downloaded after I backrevved to SP2. As a result, I went to windowsupdate.microsoft.com do updates manually. He installed the required ActiveX control, analysis, and then returns the following message is displayed:

  "The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues) "

  So I am now running SP2 and everything seems fine, except that I can't apply updates, nor can I run IE7.

  Virus Info: this machine is running Microsoft Security Essentials and AVG Antivirus, and both are up to date and returned "no items found" after a FULL analysis. I also did a manual FULL scan using Malwarebytes Anti-Malware (also updated to current rev & GIS files) and it is an executable placed under my login in Documents & Settings of DiVX, that triggers an application running ads when I open the DiVX player. He was NOT in the Windows directory. AVG and MSE up-to-date and run full scans every night, so if you believe it is a virus, I would need proof. You would also be admitting that MSE is wrong; I've been running for more than a year.

  Caution: again, I won't install SP3 & IE8 until I see that IE7 will run correctly @ SP2, which - at least in part, it will apply updates that I can't apply. Please spare me the answer "well, updated to SP3 and IE8 first, and we'll see if that fixes it. If you're wrong, I'll be right where I started and will have to go through the process again to get where I am now, lose a lot of time in the process. I don't know if it is a community site, but please, only a response from someone who can provide real help for the problem of why the update site simply says there is a problem, but does not provide any additional information about the error.

  Yes, I know that XP will support discontinued from April 2013. It is now Sept 2012.

  Thanks in advance for any help legitimate that you can offer.

  Support for XP SP2 took end July 2010 - http://support.microsoft.com/gp/lifean31

  The Windows update website no longer unless you are at SP3. I did a new install of SP2 and verfied. The mistake that almost everyone gets in these conditions is 0x8024400A. I think that if you look at the WU error page again you will see this code.

  You say that you will not install SP3 so we cannot help. You are committed to a comprehensive system of faults for the life of the PC. If you change your opinion then we do know and I/we will try to help.

  BTW XP died in April 2014 not 2013 - http://www.microsoft.com/en-us/windows/endofsupport.aspx

  Tricky

• icon cache Explorer Windows only is not updated correctly

  I had to reinstall my computer Setup, I was able to fix most things with the domain controller that you get with your computer, but I can't fix this problem, when I go to My Documents in Windows Explorer opens and I don't know how to get it back on windows Explorer.

  Can anyone help.

  Thank you

  Gertrude.

  When I enter (Windows Explorer) in my programs list it goes in (My Documents), this is incorrect, it should be list (my computer).   I've also been (Fix it Center) I have pasted (below) what he says about icon cache and what's wrong with it but do not know how to fix the problem myself.  Could you please give me an idea how to solve this?       Not fixed Icons randomly change to different icons Failed

  Some icons in my computer, in Windows Explorer on the desktop, or on the Quick Launch bar change randomly. This problem occurs if the icon cache is not updated correctly.

  Rebuild the icon cache

  Rebuild the icon cache solves this problem.

  Thanks a lot for your help.
   
  Gertrude

• Is problem with Windows Explorer (not Internet Expl.) - possible to reinstall this software or update?

  I have several problems which, after some time, can be attributed to a problem with the Windows Explorer (not: Internet Explorer)

  Examples:

  -files are not finished (so that they remain in a queue forever) (this happens every time)

  -When I try to replace a file from one directory to another this process is at a standstill (occurring rarely)

  -When I shut down, I get a message that trying explore but unable to play the fine tune (sometimes)

  -in Word, I get printer messages not responded or other problems with opening files-Word (sometimes).

  Remarkable (?): boot in normal mode is always successful, even after the crash on shutdown.

  Question:

  -is it possible to reinstall this software or update?

  - or something is needed to get a solution?

  Hi Niels,

  1. When did you start to question?

  2 did you recent hardware or changes to the software of the system?

  Method 1:

  Step 1:

  You can check if the problem occurs in safe mode.

  Start your computer in safe mode

  Step 2:

  If you are not faced with the question in safe mode, then you can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  In addition, after you fix the problem, you can see step 7 above to restore your computer to a Normal startup mode.

  Method 2:

  If you are faced with the question in safe mode, you can run a Checkdisk to see if there are drive errors that can cause this problem.

  Check your hard drive for errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

• Update cumulative security for Internet Explorer 8 for Windows Vista for x 64-based systems (KB2618444) is NOT updated successfully. 8007371 C error code. Windows Vista Edition Home Premium Service Pack 2

  Update cumulative security for Internet Explorer 8 for Windows Vista for x 64-based systems (KB2618444) is NOT updated successfully.

  Other updates DO not seem to be successful.

  Error code is 8007371 C.

  How can I get this update successfully.

  Windows Vista Home Premium Service Pack 2, 64-bit system.

  Thank you

  Hello

  You can view these methods:

  Method 1: Temporarily disable the security software

  I suggest you to disable temporarily any them program of security on your computer and check if it solves the problem.
  After reviewing the question you must reactivate the security on your computer program.

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2: Reset the Windows Update components

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.
  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  Method 3: Clean boot

  I suggest to clean boot and try to install the update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  Once you make these methods try to install the update and check if it works.

  See the following links:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  http://social.technet.Microsoft.com/forums/en-us/itprovistasp/thread/20fa3032-Cdc6-4FF5-aea4-fd31a65e883d/

  It will be useful.

• Some icons in my computer, in Windows Explorer on the desktop, or on the Quick Launch bar change randomly. This problem occurs if the icon cache is not updated correctly. How can I rebuild the icon cache solves this problem

  Some icons in my computer, in Windows Explorer on the desktop, or on the Quick Launch bar change randomly. This problem occurs if the icon cache is not updated correctly. How can I rebuild the icon cache solves this problem

  http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html

  How do I rebuild the icon Cache in Vista

  See you soon.

  Mick Murphy - Microsoft partner

• Adobe muse website not updated when I download the catalyst

  Adobe muse website not updated when I download the catalyst @.

  Try refreshing your browser after uploading to Business Catalyst. You can see the site of the memory of your browser.

• Do I need Internet Explorer security updates if I use Firefox?

  Hello!

  I can't find an answer to this question via a Google search, so I ask you here please. I use Windows 7 and see a lot of regular updates to Internet Explorer during installation. But I never use Internet Explorer, I only use Firefox. So I wanted to know, I will put my Firefox security at risk by installing does not updates of Internet Explorer published by Windows? A flaw in one another browser affect?

  Thank you!

  Alice.

  Firefox uses Internet Explorer to access the internet, but some components of Windows that Firefox needs, such as network components, could be linked with IE so that IE updates will affect them.

  In addition, Internet Explorer can be used by other Windows applications to access the internet in the background.

  So yes, it is strongly recommended that you keep it up-to-date.

• OfficeJet Pro 8610: Officejet Pro 8610 wireless printer is constantly busy and does not update the software drivers.

  I'm trying to update my printer via the steps outlined on the HP website. However, when identify my printer and try to install the revised version of the software of my printer continually says its busy. This means that the printer will not update.

  When I first tried this software update the status of the printer was ready however after failing at the start of this first attempt each following update failed because the printer is busy. I turned he walks several times and even turned off then the option automatic updates with no luck.

  Without being able to change that status, I can't update the printer. I know that it is able to connect to the network, because it checks and tells me that he has the latest software version available fo, so I am very confused as to how I can fix this.

  Any suggestions?

  Hey @Branthwaite, welcome to the Forums of HP! I'd love to help you update your JO 8610.

  From your description, I understand that you cannot refresh the printer as it is stuck in the free/busy information.

  We will perform a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in. Also, even if you have used a surge protector/power bar this whole time and you feel this isn't the cause, please plug it in to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  * In this document, you will see, QUESTION: questions or problems may occur when a printer HP LaserJet series printer is connected to a UPS (UPS), a power strip or a surge protector that is not limited to the Laserjet printers.

  I can't wait to hear back on your part. If performing a hard reset, or move the printer to a socket solves the problem, please click Accept as Solution button below so that the community can see your problem is solved. If the problem persists, please don't forget to leave me and I'll do everything I can to help.

• Download SP1 for Vista Edition difficulty family premium, coz it is not avialable @website

  for some reason, I format all the drives and then install vista Home premium. now how to get SP 1, it is not available @ website and auto update is showing errors

  Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

  Windows Vista Service Pack 1 (SP1) - 434.5 MB
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en
  Windows6. 0-KB936330-X 86 - wave0.exe

  Windows Vista Service Pack 1 for Windows Vista 64-bit (size: 726,5 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=874A414B-32B2-41CC-BD8B-D71EDA5EC07C&displaylang=en
  Windows6. 0-KB936330-X 64 - wave0.exe

  Windows Vista Service Pack 1 - language standalone DVD ISO
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=a45652b1-E838-420a-b065-83960458e2ec
  6001.18000.080118 - 1840_iso_client_sp_wave1-FRMCSP1_DVD. ISO - 1418,1 MB

  Things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/library/cc507882.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• Windows 7 does not not entirely - not updated

  Some problems have emerged over the past month, I would be very grateful for any help:

  • Windows will not update, error 80072EFE code, last modified on 02/11/2010 (February 11, 2010)
  • Search engine in IE8 and Firefox do not work correctly, with tabs doesn't work does not correctly irrespective of setting and a delay in the opening of links, that is taking too long to open the link via the search engine, but within Web sites, that it works fine and the tabs only works using a right-click "opens in a new tab.
  • All of a sudden about 30 GB of hard drive space has disappeared overnight, C properties say 168 GB being used, with hard disk total size is 294GB and this should amount to about 128 GB of free space, free space and yet shows to 99 GB.
  • And that s missing anyoing * .dll thing eroor.
  Hello
   
  Scenario 1:
   
  For the Windows Update problem, we will do the following:
   
  Make sure that the following services are started.
  1. Click Start, type services.msc, press ENTER, and then click Services.
  2. double-click on this service:
  ·          Windows Update service.
  ·          Encryption services.
  ·          Background intelligent transfer service.
  3. click on the general tab, verify that the service has not been disabled in the Startup Type box. If Yes, click Automatic to have it start when you start the computer.
   
  Also, you can check this forum for additional troubleshooting below link:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/9a1c5c09-8022-404F-a4aa-942e705a319d
   
  Scenario 2: To solve the problem with browswers:
  I also suggest you to run the troubleshooter internet explore.
   
  Windows provides a built-in utility that can automatically find and fix some problems with Internet Explorer.
   
  Open the troubleshooting Internet Explorer Performance Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click Internet Explorer Performance.
   
  To run ie 8 Troubleshooting
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Internet-Explorer-performance-Troubleshooter
   
  For more information, visit the below links:
   
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer
   
  Scenario 3: To solve the problem of hard disk space.
  If your C: drive consumes more space then you can goahead and perform a disk cleanup and remove unwanted files.
   
  Follow this link to do so.
  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DOES NOT UPDATE MY VISTA HOME PREMIUM

  MY VISTA HOME PREMIUM 32 BIT DOES NOT UPDATE AND I KEEP GETTING THIS ERROR 80073712 CODE.
  "PLEASE HELP ME"!

  http://support.Microsoft.com/kb/957310

  Above is resolution of Microsoft to your error Code.

  But it is perhaps not very simple to fix.

  1. try Method 1 to above website. Run (Checksur.exe) system update readiness tool

  2. do you have Service Pack 1 installed Vistra?

  Method 2 is in the list.

  3. method 3 is to do a Vista repair install.

  You need good Vista disc to do this.

  4. If none of the works above, you need to reinstall Vista, using either the recovery disk/s or the recovery partition.

  Save all data before you do, because it will be lost when reinstalling.

  Good luck with it.

  See you soon. Mick Murphy - Microsoft partner

• Had to do a restoration complete my xp machine and will not update, in the past, system automatically updated with cartridges of siema etc service?

  Had to do a restoration complete my xp machine and will not update, in the past, system automatically updated with cartridges of siema etc service?

  What is happening, it is that it is so more the possibility of a user friendly hands on automatic update of Windows XP from a clean install.  Windows Update will NOT synchronize with and updated in the current order status to update a machine with a clean install of XP, but you separately download some patches and intermediate updates and apply them manually, to have a machine that connects a bit normally with Windows Update.

  Install the last update cumulative security for the version of Internet Explorer you have currently is essential, and you need to download separately and install it before going any further.

  http://support.Microsoft.com/kb/2888505

  Scroll to the information file for XP and Server 2003

  Download the file corresponding to your version of Internet Explorer and install first.

  It is also highly recommended that you install Firefox because IE8 is limited, probably compromised and sometimes useless and will crash on many sites, including Microsoft sites, including linked just above.

• Windows xp pack 2 service not updated, why?

  Web site update of Microsoft showing this - the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  Hi Aurélie,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, that you can not install Windows XP Service Pack 2 and the error message "the site has encountered a problem and cannot display the page you are trying to view.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  Were you able to access Microsoft Update Website before?

  This problem occurs if you do not have the latest service pack installedor if (BITS) Background Intelligent Transfer Service or the automatic update service is stopped.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  No access to Windows Update in Windows XP, Windows Server 2003 or Windows 2000
  http://support.Microsoft.com/kb/2497281

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update
  http://support.Microsoft.com/kb/883614?WA=wsignin1.0

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with the installation of Windows XP SP2, I'll be happy to help you. We, at tender Microsoft to excellence.

• Why didn't - it not updating of security KB2686509 that installs on my machine Windows ProXP SP3?

  Whenever I turned off my computer, the update statement appears, but KB2686509 is usually the only one update, and of course, nothing happens

  Just hide & move on with your life.

  Tip: You can print the following instructions for consultation offline.

  ACTIONS

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  1B. IMPORTANT!-online make disappear/close the update Windows utility for troubleshooting 'pop - up!' -then...

  1 c. ignoring "not recommended" or similar warnings, difficulty running it 50202 DEFAULT modes and AGGRESSIVE. [1]

  2 then restart IMMEDIATELY...

  3. open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan.

  => In the category of the optional software updates on the left side of the scan results window, uncheck the option KB2686509 (assuming that it is checked) then hide it ("don't show me this update").

  -Online if an update of root certificates is listed under the category of updates software optional , install it to enjoy greater security of IE8.

  -Online Tip: do NOT install other updates software optional or optional hardware updates. just hide them, too.

  Now, go back to the main result window & install all updates listed (if any); Follow all the instructions.

  Note: of course, if security updates are listed in the window of main results (for example, KB2744842), you must install them!

  4. in response to this post with a status report.

  =======================================================
  [1] full Disclosure: the difficulty operating in aggressive mode will remove your update history (to the Windows Update Web site) but not updates installed in Add/Remove Programs list.