Export a flattened (without layers) PDF to InDesign?

Similar Questions

• Need help, cannot export a pdf from indesign cs5

  Hello I used indesign several times so that exported this work in 2015, I've updated this 36 page book this year and I can't export the pdf file, I get no error, the background window does not move, I have every time to leave indesign, I can export indd. as jpg but not my indesign file in a pdf print ready, any ideas? I don't do anything different than normal (I think), thank you so much Cindy

  What happens with any document or just this one?

  Here is another approach:

  Gather all your linked files and fonts help

  file-> package.

  and save it to another drive.

  Frome, open the indd file in the folder of the package and try to export PDFs.

  Let us know if it works

• How can I export my book in Adobe PDF format without it abandoned with a message "printing error"?

  I use Adobe InDesign CC 2015 on Windows 7 and a book with several chapters, each chapter being a separate document. Several attempts to export the book to Adobe PDF failed with the following statement:

  "Printing error: Adobe Print Engine failed at the end of your data due to an unknown problem."

  When I run the command 'Package book for print', it shows that there are some fonts and missing images. However, as far as I know, I replaced all the missing fonts and I'm unable to see all missing fonts or images on the computer screen. Person documents in the book export to Adobe PDF with no problems, but the book does not print as a whole, affecting the table of contents and the page numbering (e.g. Roman in the front-end vs Hindu-Arabic in the rest of the book). I'm frustrated because InDesign doesn't tell me what the problem is. I'd appreciate any help in this regard.

  No, I wasn't trying to PRINT to PDF. I tried to export the book in PDF format in following file > export... and then click on PDF for output. That did not work. However, I just realized that I can export the book by clicking on the small arrow in the upper right corner of the menu that shows all the documents in my book (I don't know how it's called). From there on, I chose "export book to PDF...". "and voila! It worked.

• I would like to create an interactive pdf in Indesign - two guest on 1 page in Indesign that when exporting to adobe reader in pdf format, I can simply add new names that populate both copies and then be printable. Any help out there is how to make an ext

  Two invites on 1 page in Indesign that when exporting to adobe reader in pdf format, I can simply add new names that populate both copies and then be printable. Any help out there is how to make an invitation in Indesign, but now how to make 2 copies on a single page that someone else ie the customer can add their own names. So each field name must complete on both guest. Sounds simple, but is not really there to help. I think he called an interactive pdf. Thanks in advance.

  AutoFill is the easiest part, he lies. If both fields have the same name, they will have the same content: type in one and it appears in the other.

• Export interactive PDF in indesign, with the animation of the edge to the SWF file?

  Hello

  I have an interactive pdf in indesign with animation, works very well when they are exported to the swf file.

  I need to use more complex animations that Indesign has, so I created some new features of Adobe Edge animate, exported save them as a file .oam and then put them in the Indesign file.

  If I use the Preview on the animation tab I see indesign animations and the edge, but if I export it to a SWF file is - this only animation to indesign working, and if I export to epub file is only the edge animation work.

  Somehow it is possible to export so that the two works of animation types. and it is possible to do it in a SWF file.

  I have Creative Cloud 2014 for both programs

  Thank you!

  NO.

• Anyone know how to export a PDF from InDesign is "click to go to the next page" instead of "scroll to go to the next page?

  Anyone know how to export a PDF from InDesign is "click to go to the next page" instead of "scroll to go to the next page?

  I do not use the InDesign last, but in the past ID options for export to the format PDF did not define how a PDF should be considered once exported.  However, these settings can be adjusted in Acrobat via preferences: departure of layout and Zoom in the view of the Page.

  David

• When I export a PDF from Indesign CS6 (PDF1A), the first page of the document is blank.  Why?

  When I export a PDF from Indesign CS6 (PDF1A), the first page of the document is blank.  Why?

  Do not fix PDF 1A errors?

  Here is my screenshot of indesign and acrobat.  The first page is empty, the second page is not.  Why only the first page?

  Any help is very appreciated!  Thanks in advance!

  

  Adobe strongly recommends use of PDF/X-4, which retains direct management transparency and color all the way to the INVESTIGATION period.

  PDF/X-1a is indeed antiquated for any content that uses anything other than CMYK + spot color or transparency.

  All modern PDF workflow software supports PDF/X-4. If you are printing to a PostScript RIP, Acrobat Pro (version X and XI) can print PDF/X-4 of tears (or printers) pretty well.

  -Dov

• Exporting to PDF from InDesign CS5

  Probably a real simple question to answer, but I am confused.  I'm trying to export a bulletin 6 pages in .pdf format from InDesign CS5; It comes out as a 4-page document in the following sense: the first page is fine (vertical on letter size), the 2nd and 3rd pages appear side by side (horiz. / letter) like pages 4 and 5.  Page 6 is again very well (vertical/letter).  I never had this problem with CS4...  Any suggestions?  Thanks in advance, Wharton

  Interactive PDF is exported in is spreading by default, and the only way to change that is through the script. See Interactive PDF from InDesign CS5 has always Spreads on | InDesignSecrets

• How to restore good export PDF from InDesign CS3 or CS5 in Snow Leopard?

  I had no problem to export to PDF from InDesign CS3 files (on a Mac Pro running Snow Leopard 10.6.4) until last weekend, when all the fonts appear bitmap or thin and rough, and the images lost color depth and contrast. When I copied the InDesign document to my MacBook Pro laptop, also running 10.6.4 the PDF has emerged with its original quality. Support calls Adobe referred me to the incompatibilities between Snow Leopard and InDesign documents. One of these documents was several pages long, but I could not print from the Adobe to my HP website all-in-one Officejet, because one-third of the document was hidden under a white board. This makes it impractical for the troubleshooting document, because I don't have enough screen real estate (even on a 23-inch screen) to let the open document and all the pages and dialogue boxes needed for reference. Back to the phone and chat support, I was told to upgrade my Creative Suite Premium CS3 to CS5 ($ 800!) and buy the updated Acrobat Pro ($200), with no guarantee that this cost of $1,000 would actually solve the problem. I downloaded the trial version of InDesign CS5, and it has NOT solved the problem. I am also afraid that the problem did not exist before last weekend. Before that, my CS3 and Snow Leopard combination worked very well. Then I checked the forums and was appalled by the variety of issues related to PDF files, for which there seems to be no general solution. Meanwhile, I have hundreds of ads, I'm supposed to be prepare and e-mailing as evidence PDF to businesses nationwide. I have two books of 120 with 256 pages to be submitted to printers in PDF format with all kinds of fonts and files image belonging to my clients. The last time I presented a paper on a printer by electronic mail, the work went perfectly. This time and the next, it is obvious, that I won't be able to send a PDF file to all! If this is the case, my activities related to the directories of 27 will be unable to absorb the expenditures necessary to start all over again with software and new computers, and I'll be out of business. Period. Yes - someone ' an at - it a way to solve this problem? Surely, I would be grateful.

  David Henderson

  There are a lot of things on the forum software and interface that could stand a little improvement...

  Smoothing is enabled for display in Acrobat?

• Can't print PDF from InDesign after update Microsoft anni

  Hi all, since the anni update I was unable to print PDFS from InDesign. No matter if I put PDF for default printer or use the option "Microsoft in PDF format; what I get is: "printing error: Adobe Print Engine failed at the end of your data due to an unknown problem. Sometimes it will print a little less than half of a 60-page document and that's all - it fails (but I get a PDF of that half...). Sometimes, it just goes straight to the error.

  Anyone know what is happening on our how to fix? I have a deadline...

  See you soon

  Steve

  Hi Dov, thanks for the reply. As mentioned earlier in this thread, I use export when I want to send it to the printing press. However, at this point, I am willing to create a test that is reduced file size and allows me to put all 60 pages of the document in a gap of seven pages using the print option of 3 x 3 thumbnails per page. It gives me a manageable file to send to several people for the document of proof and, at this stage, the output of high quality is not necessary.

  However, I seem to have solved my problem:

  As mentioned, the document prints 1-27 on a 60 page document (print, failed on page 28).

  The paper would not print the range 27-60, when I tried later.

  The document will print 30-60 range.

  Therefore, the problem lies in pages 27 and 28. I've got rid of the pdf linked to two pages and tried work a print - it worked. then, of course, my problem lies in one of the PDFs linked to each page 27 or 28. It turns out that when I opened the linked PDF (sent to me as a PDF from another company as an advertisement) on page 28 in PS, PS automatically rasterized image, I recorded to a location different, re-related in InDesign, and guess what - it worked. I got the impression that I asked who had already failed.

  So, this boiled down to a single work of art linked PDF requiring a pixelation...

  All the best

  Steve

• Conversion of PDF in Indesign Documents

  Hello

  We lost a lot of InDesign files to a virus, all InDesign files, we've lost have been exported to PDF, and I was wondering if we can convert the same PDF to an InDesign file to replace the lost InDesign files.

  Thank you

  There is a costly PDF2ID plugin

  PDF2ID - PDF to InDesign, how to convert PDF, InDesign, convert PDF to InDesign

  Don't expect wonders, as a file PDF does not contain complete information to CO-OPERATE, according to how make you a PDF file.

• Button nail in interactive PDF from InDesign CC

  I designed an interactive PDF in InDesign CC. When I export and open it with Acrobat the 'buttons' have a blue fill (see them the color for the border of stationary fields).

  I know that I can go into my Acrobat preferences and disable this option however when sharing with other users the PDF I don't want that they have to make those changes in their Acrobat preferences or devrais I must. I understand the highlight color is important when creating text fields for forms, but it's a boring and useless feature for the "buttons".

  It also makes my custom buttons look crap. Is it possible in InDesign to turn off the highlight color before exporting to interactive PDF?

  See my screen capture below, you can see how it destroyed my design.

  

  Geigreg I am a designer as well and understand try this with my code above:

  `

  Acrobat X Pro, you will use the JavaScript Panel in the tool pane. You may need to display the JavaScript in the dropdown at the top right of the Tools pane.

  To add the script to the Document level, you then click Document JavaScripts. An opening of dialogue where you enter the name of the script (for example "highlighted". Then, a text editing box opens, where you can enter the code. Select the entire document and delete it. Then add the code as described above. Confirm and close the dialog boxes.

  For the willClose script, click the value of the Document Actions. Opens a dialog box where you can choose the events. Select close document. An edigint text box opens, where you can enter the code. Enter the code as described above. Confirm and close the dialog boxes.

  Save the document and reopen it.

  I hope this can help.

• How to convert a PDF fo InDesign CC 2014?

  I see that I can export to Microsoft programs or .rtf, but I do not see anywhere to convert to InDesign.

  Thank you

  Is not a. InDesign files have a complex structure that cannot be reconstructed from the data in a PDF file, although this native PDF from InDesign. There are some third-party products that try a conversion, but it is better in the long term to save the PDF file to RTF (Word, etc.) and which re - import a new model INDD, creating styles and graphics again from scratch.

• Layering PDF of FM

  Hi all

  Having a bit of a problem; I joined a PDF layer (created with distilling 8.2.3 PDF Version 1.6) in setting v8p277 and everything seems in good condition. However, when I print the book as PDF new components in layers are flattened in the output document. I used the print quality settings (PDF version 1.6) to produce the new PDF, but I'm not sure where my problem lies perhaps FM? or the Distiller? I tried to distill the file ps using Distiller 6 and 7, and he gave the same results. I'm hoping for guidance in the following areas:

  Q1: What is supported Framemaker layered PDF files?

  Q2: Is it can produce a layered PDF file? Version?

  Q3: Are there specific Distiller parameters should I apply?

  Thank you in advance for your help!

  ATS

  When FM import a PDF file, FM treats as a graphic and converts it internally in EPS format. In this process, all layers (& transparency) get flattened.

  You can produce some PDFs in layers of FM using third-party tools of Microtype. You can also try using pdfmark controls for optional content groups (the internal function of layer) incorporated in blocks of text postscript, but it is extremely complex.

• Without layers

  I used to be able to send my psd files and they would easily be open to show the layers. Now when I send people all my files, that they see is a single image and without layers. What is going on?

  Yes, I did. The problem was with gmail, rather than photoshop. Please help us well!

  Lindsey