Export AV under PDF script creates "unexpected error".

Similar Questions

• System Restore cannot create restore, point because the "shadow copy provider had an unexpected error." What can I do?

  Have a Dell Inspiron 1545 with Vista.  System Restore cannot create restore, point because the "shadow copy provider had an unexpected error."   What can I do?

  Hi JamesParwulski,

  Method 1
  I suggest you to scan SFC.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.
  http://support.Microsoft.com/kb/929833

  Method 2
  I suggest you perform a checkdisk.

  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

• "Unexpected error" occurs when you try to create a network with a security profile wpa/wpa2 enterprise

  I recently started using Windows 7 x 64 and I'm unable to create a network with WPA2 - Enterprise Security profile.  I have a wireless card for Intel PRO/Wireless 3945ABG with 13.0.0.107 driver version.  I have had no trouble to create this network in Vista Ultimate x 86 profile, and I do not know what is causing the error.

  I went through the steps to create a network profile:
  1 'Add' a network profile
  2 ' manually create a network profile '.
  3 name the profile, and then select WPA2 - Enterprise with AES encryption

  When I click on 'Next' to complete the configuration of the profile I just get a message that says:
  "An unexpected error has occurred."

  Has anyone experience the same problem?

  Thanks to another post and help Orgwizard, followed it to Symantec Endpoint Protection. I had emigrated from laptops using the Easy Transfer Wizard and did not reinstall MS and sought instead to Microsoft Security Essentials. MSE deleted and reinstalled MS and everything is fine now!

• Create hyperlinks in PS CS6 - export as Photoshop PDF

  Hello world here!

  I design my PDF documents in Photoshop CS6 due to graphic content heavy involved in it and then I export via Photoshop PDF. I am wanting to make hyperlinks in my text so that a display of the PDF file will be able to click on the text or image and it will open a Web site.

  (e.g. click here to like us on Facebook!) With the "here" being the hyperlink.

  How should we do this?

  Hi Adam

  Unfortunately, you can not place hyperlinks in a Photoshop document and export to PDF.  You can of course create the work in Photoshop, but to use a hypertext link, you must use an application like InDesign, or even MS Word or MS Publisher.

• I created show and hide features in InDesign I want to export to interactive PDF format. These functions work when seen in Acrobat on the desktop, but not on iPad/Tablet - why?

  I created show and hide features in InDesign I want to export to interactive PDF format. These functions work when seen in Acrobat on the desktop, but not on iPad/Tablet - why?

  Why? Most likely because the PDF Viewer on the Tablet is too stupid to deal with show/hide functionality.

  You could try PDF Expert of Readdle on qpdf Notes Pro on Android and iOS devices.

  Depending on how the show/hide was created during the export of InDesign, it can work in viewers. Otherwise, you will need to open PDF files in Acrobat and edit features show/hide something more digests of PDF device viewers.

  BTW, you will encounter the same issues with the PDF display components in web browsers.

  I hope this can help.

• I want to cancel and get my $$$ back, because the conversion using Adobe export in format PDF to Word does NOT, too many errors and inaccuracies in the Word DOC to use. Please cancel my order AD017941759 as soon as POSSIBLE!  Thank you...

  I want to cancel and get my $$$ back, because the conversion using Adobe export in format PDF to Word does NOT, too many errors and inaccuracies in the Word DOC to use. Please cancel my order AD017941759 as soon as POSSIBLE!  Thank you...

  You will be eager to start here:

  Cancel your subscription or membership. Acrobat, services Cloud of Document PDF

  Be well...

• Why do I get an error when you try to export a large PDF to Excel?

  ExportPDF process returns only a single message.

  The file has not been processed.

  An error has occurred which has stopped treatment of the PDF file.

  Hi gymwalker29,

  There is a limitation of file size of 100 MB for sending files to the service to export it in PDF format

  As for the quality of the conversion, our FAQ entitled Will Adobe ExportPDF convert text and formatting information?

  Acrobat can convert large files.

  You can use the Acrobat free trial for 30 days service:Download Adobe Acrobat free trial version | Acrobat Professional XI

  Kind regards

  Florence

• How to export to PPT PDF so that the forms created in Illustrator are editable

  How to export a PDF to PPT so that the forms created in Illustrator can be changed, not just the text above them? I used the technique of Acrobat Pro XL described here (http://www.adobe.com/products/acrobat/pdf-to-powerpoint-pptx-converter.html), to export a chart, I had created in Illustrator and saved as an Adobe PDF file, but the forms are not editable and are blurred, too. Is there a way to export a complete Illustrator graphic to PowerPoint?

  You can go directly from Illustrator to PPT, either by the Clipboard by recording (EMF or PS) important for PPT. He has no sense going through PDF to reach a PPT in a workflow. If you have an Illustrator drawing to PDF, you can also copy (or change) in Illustrator to work on it.

• An unexpected error during download of pdf file?

  Why can't I download my pdf file.  An unexpected error occurs everytime I try.  I want to convert it to Word.  Need to get downloaded first apparently.  My systems are all that are necessary, then, what is the error?

  wykee6

  Hi Gail,

  OK, I understand. Although we are sorry to see you go!

  Let me know if you have any other questions or if I can help further.

  Sincerely, Stacy

• VPN connection: An unexpected error has occurred.

  I am suddenly unable to get my built-in VPN connection works on my iMac with OS X 10.11.5.  I get the VPN connection message: an unexpected error has occurred.  I have been using this VPN configuration to connect to work for several months with success.

  But last week (and I do not know if it had nothing to do with it), I went on vacation and used a free wi - fi setup of Tim Hortons.  I had a LOT of trouble getting the next login page, and I checked all playing with different settings of network without success.  When a change did not work, I put it to its original setting.  Finally, I learned to use Safari to access the free WiFi connection page of Tim.  Then once connected, everything was OK.

  But when I returned a week later and if necessary, to start my VPN connection to access the work, it wouldn't start.  I checked and recheck all my settings preferably of different network, but did not find those who were wrong.  I even deleted and re-entered my VPN service definition without solving the problem.

  Thinking that the problem could be the newly installed ISP of Bell equipment (we went from Rogers while I was away), I used my BlackBerry smartphone (issued by my employer) to create a wi - fi hotspot and accessed to the internet using this connection which completely ignored my home ISP equipment.  But still, I was unable to establish a VPN connection.

  I then tried my iPad VPN connection, and it worked!  Then, I defined a VPN service on the iMac to my wife and the iMac to my daughter and was able to successfully establish a VPN connection to my work very well, using exactly the same VPN configuration.  This led me to the conclusion, it was a problem on my iMac (and not with my new ISP or VPN system of my work that had none of the changes you made), but I still can't find what is "broken".  I run Onyx for my iMac OS X 10.11.5 and repaired permissions and clean the cache and all the rest she is doing to "solve" problems.  But the problem persisted.

  Is there a preference file corrupted somewhere (scan option is no longer on the current version of the Onyx for a reason any)?

  I still have a network setting wrong somewhere I need to go back to the system is correct value?

  Here is the attempt to VPN from the file system.log (with some hidden values in the case where they display my work VPN access):

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: received an order to start SystemUIServer [257]

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: changed to connecting status

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: phase 1 of the IPSec from.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: agreed to the takeover of vpn connection.

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: connection.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec Phase 1 started (initiated by me).

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: bind 1 (cannot assign requested address)

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: sendfromto failed

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: Phase 1 negotiation failed due to the error of sending. 94437eb7d5b1b6e8:0000000000000000

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: can not send packets

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IKE Packet: send failed. (Initiator, aggressive Mode 1 Message).

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: Controller IPSec: IKE FAILED. Phase 1, assert 0

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed by disconnecting

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec disconnection from the server 142.201.5.6

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec disconnection from the server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 3 times-

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed to offline, terminus right no

  Any help or insight would be more useful and appreciated... so that I can work from home again.

  Thank you

  Myron VanderLaan

  I finally found my VPN problem.

  There is a 'racoon' file that is generated when I connect to the VPN to my work site.

  I have created a modified version of this file so that my connection does not expire in 3600 seconds (changed in 24 hours).

  Apparently, there are some slightly different settings (such as certain IP addresses other than VPN IP of my work) in this file under our new ISP Bell from the former FAI Rogers.

  And if I connect to the WiFi Hotspot from my BlackBerry, it does not once again because these settings in the file are different again.  I must return the file generated instead of my modified file.

  Bad luck!

• __Windows Setup has encountered an unexpected error. to install the reboot, the installation error code 0x0

  I have an Asus f3sv with vista home premium (32 bit).  I am trying to install Windows 7 Ultimate (32 bit)

  During "the installation program copies files", I get

  "Windows installation encountered an unexpected error. to install restart, the Setup error code 0x0 ".

  I went through and removed all the programs windows Upgrade Advisor said that I had to delete.  disabled the antivirus and have rebooted several times

  When I tried in safe mode it says I could not install in safe mode

  When I booted from the disc in copied files, and then when I said I wanted to update to the appropriate Vista installation.

  I decided to copy the filed on the hard drive and it's vista blue screen

  I copied the files on the hard drive (in safe mode) and tried to start the installation of the copy.  I get the following error

  Windows could not create a Setup folder 0x8007000D error code

  I can find nothing in the forums with the same problem.

  Check your hard drive for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.
  User account control permission
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Could you try to reinstall Vista and proceed with a flat installation?

  To proceed with the installation plate, follow these steps:

  1. Insert the Windows 7 installation disc.

  2. start Windows Explorer.

  3. in Windows Explorer, click to select the drive for the Windows 7 installation disc.

  4. in theEdit menu, click select all .

  5. on the Edit menu, clickcopy .

  6. Click to select the hard disk you want to contain the flat installation files.

  7. on thefile menu, point to new , click folder , typeWindows 7 Setup and then press ENTER.

  8. double-click onthe Windows 7 Setup and then click Paste on the Edit menu.

  9. double-click onSetup.exe and follow the instructions that appear.

  For more information about dish install, please visit the below mentioned link:

  http://support.Microsoft.com/kb/928902

  Note: KB talking about the process involved in Vista, but it applies even to Windows 7.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• None of my troubleshooting services work "an unexpected error has occurred and the convenience store was not able to start.

  I can't use the convenience stores in the Panel and trouble getting my printer to re - install, when I click on devices and printers in Control Panel, rather than load him immediately, a green bar moves along the top where devices and printers are, but you can click on the choice and it will load If I go in safety in the Panel and choose troubleshoot, I get the error message, an error is produced so that download troubleshooting, or an unexpected error has occurred, the Troubleshooting Wizard can not continue. When I tried to access microsoft fix - it, I get the error message, troubleshooting cannot continue because there is an error, runtime error, code: 80040402, also 0x800B010E error codes. I am running windows 7 service pack 1 on Dell Inspiron laptop. I'm pulling my hair out! Help, please!

  Hello

  1 did you changes to the computer before the show?

  2. which antivirus is installed on the computer?

  I suggest you follow these methods and check.

  Method 1: Perform clean boot using the suggestions mentioned in the below mentioned link.

  http://support.Microsoft.com/kb/929135

  NOTE: once you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: Run the tool (SFC.exe) System File Checker and check.

  Follow the shape of measures the following link: http://support.Microsoft.com/kb/929833

  See also this link to resolve script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

  Method 3: Perform a full scan of the computer using the following antivirus applications.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the method above does not work, proceed to the next method.

  Method 4: Check the functionality in another user account.

  If it works in a different user account, then the user account is damaged.

  Create a new user account, copy files to the new user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• ORA-39127: unexpected error in call to 'WMSYS '. "" "" LT_EXPORT_PKG '. "" SYSTEM_INFO_EXP ".

  While the export of database complete expdp following errors show?

  Start "SYSTEM". "" EXPORT_JOB_150506150137 ":

  Current estimation using BLOCKS method...

  Treatment of DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA object type

  Total estimation using BLOCKS method: 2,906 GB

  Object DATABASE_EXPORT/TABLESPACE of treatment type

  Type of object DATABASE_EXPORT/PROFILE of treatment

  Treatment of DATABASE_EXPORT/SYS_USER/USER object type

  Treatment of type of object DATABASE_EXPORT/SCHEMA/TYPE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT

  Treatment of type of object DATABASE_EXPORT, SYSTEM_PROCOBJACT, PRE_SYSTEM_ACTIONS, PROCACT_SYSTEM

  ORA-39127: unexpected error in call to 'WMSYS '. "" "" LT_EXPORT_PKG '. "" SYSTEM_INFO_EXP ".

  ORA-44002: incorrect object name

  ORA-06512: at "SYS." DBMS_ASSERT", line 383

  ORA-06512: at "SYS." Dbms_metadata", line 10079

  Treatment of type of object DATABASE_EXPORT/SYSTEM_PROCOBJACT/PROCOBJ

  Treatment of type of object DATABASE_EXPORT, SYSTEM_PROCOBJACT, POST_SYSTEM_ACTIONS, PROCACT_SYSTEM

  SQL > select * from v version $;

  BANNER

  --------------------------------------------------------------------------------

  Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  PL/SQL Release 11.2.0.4.0 - Production

  CORE Production 11.2.0.4.0

  AMT for 64-bit Windows: Version 11.2.0.4.0 - Production

  NLSRTL Version 11.2.0.4.0 - Production

  SQL > select * FROM SYS. EXPPKGACT$ WHERE SCHEMA = "WMSYS";

  LEVEL OF SCHEMA PACKAGE CLASS #.

  ------------------------------ --------------- ---------- ----------

  LT_EXPORT_PKG 1 1000 WMSYS

  LT_EXPORT_PKG 2 1000 WMSYS

  -------------------------------------------------------------------------

  expdp

  Export: Release 11.2.0.4.0 - Production Wednesday, may 6, 16:11:43 2015

  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

  ---------------------------------------------------------------------------

  Operating system == > > Windows server 2008 R2 Enterprise Edition.

  RAJESH. PK

  Hello

  Conn / as sysdba
  create the table sys.exppkgact$ _backup in select * from sys.exppkgact$;
  remove the sys.exppkgact$ where package = "LT_EXPORT_PKG";
  commit;

  Run the new expdp

  'This eliminated error' now

  Thank you Top.Gun your fast support.

  Rajesh

• Nonprinting buttons appearing in the wrong order when you export to interactive PDF!

  I am a customizable holiday gift certificate creating generic view on our website for download. I create using InDesign CS6. The idea is that the interactive PDF can be opened in the reader, one of the six charts of certificate can be selected (via the radial buttons that hide/show graphics that have been converted into buttons), and various text fields can be filled in. Then, the certificate can be printed and cropped. I have all the interactive elements, works very well, including the "print" key. The interactive PDF looks like this:

  

  However, when printing, I would ONLY the certificates and the fields of text to print and not the instructions, header, or radial buttons selection certificate or full color, background. The point of this is so that the user doesn't lose the ink. I want to print like this:

  

  At first I tried to make nonprinting objects, but which also shows them not when exported to interactive PDF. I then tried the same thing by putting on another layer and uncheck "print layer" (but check "show layer"), but I came across the same result. After searching the forums, I discovered that the only way to make these nonprinting elements, yet still visible in the interactive PDF, is to convert each object to a button and then uncheck the "Printable" box in the window buttons and forms. I did, and now everything seems to work fine...

  Except that when you export, export buttons in order of stacking poorly, like this:

  

  This color background continues to go on in front of all the rest. Even if I put it on it's very own layer under layer with all other charts (converted to buttons) on this subject, he always appears in front of all the other buttons. It is the same whether or not I have check the box create Acrobat layers. What the devil I'm doing wrong?

  http://InDesignSecrets.com/stacking-order-bug-exporting-interactive-PDF.php

• Problem with external hard drive (an unexpected error - 50)

  I've had this problem for a few months now. Sometimes, I can't delete a file from my external hard drive, or export a file to it. The process is impossible, and I get a message "Cannot perform the action due to an unexpected error - 50". Ejecting the disc gives the message "eject impossible because another program can use it." Ejection force becomes the only option. After re-login, the problem goes away, like nothing ever happened.

  The question is not constant, but quite common to become a nuisance, the one I want stopped.

  That's what I think it is (a bad connection with the cable, defective contact), or is this a virus? I need to know.

  The hard drive is 1 TB Toshiba Canvio Basics and is formatted as Mac OS extended (Journalized).

  not a virus, and not only because there is no virus mac at this time.

  negative errors on the discs can be a signal indicating that the file is corrupted or worse still, the drive is failing. While it can also be a problem with the cable or the connector that it commonly goes back on the disc itself.

  Currently, it is recommended that you backup your data if a backup fails, you may need to save what you can manually and sometimes that means go to this folder by folder or file by file

  Use Time Machine to back up or restore your Mac - Apple Support

  All HARD drives (and SSD') eventually fail and while this isn't a your statement you should check the drive with disk utility (Macintosh HD/Applications/Utilities/Disk Utility) after you got what you possibly can off and consider replacing the disk with a new one.