Export data to a flat file HRMS

Similar Questions

• Export data in a flat file without use of FL

  Hello
  
  I'm looking for options where I can export data into a flat file without using a FL (line Layout) i.e., using only the App Engine.
  
  Please share your experience if you did something like this
  
  Thank you

  A simple way to export any folder (table/view) to a csv gall, is to create a set of lines and loops through all fields of record like below example code

  Local Rowset &RS;
  Local Record &Rec;
  Local File &MYFILE;
  Local string &FileName, &strRecName, &Line, &Seperator, &Value;
  Local number &numRow, &numField;
  
  &FileName = "c:\temp\test.csv";
  &strRecName = "PSOPRDEFN";
  &Seperator = ";";
  
  &RS = CreateRowset(@("Record." | &strRecName));
  &RS.Fill();
  
  &MYFILE = GetFile(&FileName, "W", %FilePath_Absolute);
  
  If &MYFILE.IsOpen Then
  
     For &numRow = 1 To &RS.ActiveRowCount
        &Rec = &RS(&numRow).GetRecord(@("RECORD." | &strRecName));
  
        For &numField = 1 To &Rec.FieldCount
           &Value = String(&Rec.GetField(&numField).Value);
           If &numField = 1 Then
              &Line = &Value;
           Else
              &Line = &Line | &Seperator | &Value;
           End-If;
  
        End-For;
        &MYFILE.WriteLine(&Line);
     End-For;
  
  End-If;
  
  &MYFILE.Close(); 
  

  You can of course create an application for generic class call this piece of code.

  It will be useful.

  Note:
  Do not complain to me ;) on performance issues

• Export of table to flat file

  OWB 10.2.0.1
  DB 10.2.0.4
  
  I need to export data to a flat file, and the ADMINISTRATOR has implemented a directory object:

  CREATE DIRECTORY "TEST_OUT" AS '(PATH ON THE SERVER)'

  Warehouse Builder can use it in a file location (and if so, how)?
  
  An alternative would be to put the utl_file_dir in the init.ora file and then create a file location that refers to the value utl_file_dir?
  
  If none of those who won't work, which is a good way to export data from flat files?
  
  Thanks in advance.

  If you create a connector to the location of the Oracle where the mapping will be deployed to a location where the file is configured (in OWB) and name the connector with the same name as the SQL directory it should do the trick. OWB mapping with the file as a target use UTL_FILE routines with a Directory SQL name. OWB can give you cannot create directory SQL errors because it exists, but you should ignore these and be OK. A small number of if and of but here in version 11 GR 2, we have the same functionality as db links where the connector can use an existing or create a new.

  See you soon
  David

• faced with the question when writing data to a flat file with UTL_FILE.

  Hi gurus,
  
  We have a procedure that writes the data from the table to a flat file. RAC is implemented on this database.
  While writing data if the current instance, this procedure creates two copies of the data in parts.
  
  Any body can help me to solve this problem.
  
  Thanks in advance...

  I also asked this question, but it seems no final solution...

  In any case, here are two possibilities
  (1) the directory for the file among all nodes share
  (2) run you a procedure on a specific node

• Pass data to a flat file to sql query

  Hi all
  I have the table table1 with the columns workitem_id, c1, c2, and c3, number of data for all type.
  
  I use the following query
  
  Select work_item_id, c1, c2, c3 from table1 where workitem_id (pass the values of flat file)
  
  Suppose my table contains 500 work item ID and the flat file contains 1000 ID, my above query returns only 500, right?
  
  I want to display all the work item IDS (1000) with c1, c2, c3 as 0.
  
  Help, please.
  
  Thank you
  
  Vermorel

  So you want to use a [EXTERNAL TABLE | http://download.oracle.com/docs/cd/E11882_01/server.112/e10713/tablecls.htm#CNCPT1141]

  now, suppose you called this 'TABLE_EXT '.

  Now, you want to have a query as...

  select
     te.COLUMN_NAME_HERE   AS work_item_id,
     NVL(t1.c1, 0),
     NVL(t1.c2,0),
     NVL(t1.c3, 0)
  from table_ext te, table1 t1
  where te.COLUMN_NAME_HERE = t1.workitem_id (+)
  

• How to merge and write analog inputs, and export data to a tdms file?

  I have a vi who writes analog inputs in tdms files. I also want to write the analog output signals, which are 2d table entries in the same PDM file with additional columns representing the analog output signals. How can I get this feature?

  Ashaironix wrote:

  Hey Crossrulz,

  So you're saying that writing two files tdms with entries as HAVE and AO, will write everything in a file single tdms AOs and Ais?

  N ° you write in the same file, just different GROUPS.  TDMS is a hierarchical data format.  You have the file, group, channel.  Waveform data will actually in the channel data.  But you can have metadata on any level.  So, I do a group I and a group of the AO.

• Export data from FFT Excel file spectrum graph in Labview.

  I have a graph FFT espectrum showing frequency and Amplitude. I want to export the values in this chart as an excel file.

  Could someone help me please.

  You have MS Excel installed on your computer? Or tiara? These options are disabled if you have not installed appropriate software.

  Thank you

  AREV

  CTO | RAFA solutions

  

• How can I export data from table to file

  Is probably a stupid question, but I have not found any KM to read a SQL server table and load its files into a text file.
  Could someone explain to me how can I do?
  Thank you

  You can use the ODISQLUnload tool. This will extract all the data in a file with the format specified in the tool.
  -in fact, if there is a large volume, I would be tempted to use a bcp command to do so. This could be in a procedure. You could get the bcp command format and a few hints on how to make generic km here
  Craig

• Export data user a response file

  This question has been posted in response to the following article: http://help.Adobe.com/en_US/Acrobat/X/pro/using/WS54D5A6A1-5F8B-404A-8B92-AEDBE5EB8AD6.htm l

  When you view the responses you receive in Acrobat uinsg Tracker, you should see the option to export on the left of the screen. You can choose to export to CVS or XML format which can be read by a spreadsheet program. The header row contains the field names.

• How to view the flat file to ADF Flow task data

  Hello
  
  I have some data in a flat file.
  Now, I want to show the data in a table in the workflow of adf.
  
  Please help me to know how to achieve this functionality.

  Hello

  Have a look here: http://dstas.blogspot.de/2012/11/csv-files-with-adf-csvparser-example.html?m=1

  Once the file is loaded in a query of the VO, the workflow can construct the table by dragging the VO

  Frank

• export data from the table in xml files

  Hello
  
  This thread to get your opinion on how export data tables in a file xml containing the data and another (xsd) that contains a structure of the table.
  For example, I have a datamart with 3 dimensions and a fact table. The idea is to have an xml file with data from the fact table, a file xsd with the structure of the fact table, an xml file that contains the data of the 3 dimensions and an xsd file that contains the definition of all the 3 dimensions. So a xml file fact table, a single file xml combining all of the dimension, the fact table in the file a xsd and an xsd file combining all of the dimension.
  
  I never have an idea on how to do it, but I would like to have for your advise on how you would.
  
  Thank you in advance.

  You are more or less in the same situation as me, I guess, about the "ORA-01426 digital infinity. I tried to export through UTL_FILE, content of the relational table with 998 columns. You get very quickly in this case in these ORA-errors, even if you work with solutions CLOB, while trying to concatinate the column into a CSV string data. Oracle has the nasty habbit in some of its packages / code to "assume" intelligent solutions and converts data types implicitly temporarily while trying to concatinate these data in the column to 1 string.

  The second part in the Kingdom of PL/SQL, it is he's trying to put everything in a buffer, which has a maximum of 65 k or 32 k, so break things up. In the end I just solved it via see all as a BLOB and writing to file as such. I'm guessing that the ORA-error is related to these problems of conversion/datatype buffer / implicit in the official packages of Oracle DBMS.

  Fun here is that this table 998 column came from XML source (aka "how SOA can make things very complicated and non-performing"). I have now 2 different solutions 'write data to CSV' in my packages, I use this situation to 998 column (but no idea if ever I get this performance, for example, using table collections in this scenario will explode the PGA in this case). The only solution that would work in my case is a better physical design of the environment, but currently I wonder not, engaged, as an architect so do not have a position to impose it.

  -- ---------------------------------------------------------------------------
  -- PROCEDURE CREATE_LARGE_CSV
  -- ---------------------------------------------------------------------------
  PROCEDURE create_large_csv(
      p_sql         IN VARCHAR2 ,
      p_dir         IN VARCHAR2 ,
      p_header_file IN VARCHAR2 ,
      p_gen_header  IN BOOLEAN := FALSE,
      p_prefix      IN VARCHAR2 := NULL,
      p_delimiter   IN VARCHAR2 DEFAULT '|',
      p_dateformat  IN VARCHAR2 DEFAULT 'YYYYMMDD',
      p_data_file   IN VARCHAR2 := NULL,
      p_utl_wra     IN VARCHAR2 := 'wb')
  IS
    v_finaltxt CLOB;
    v_v_val VARCHAR2(4000);
    v_n_val NUMBER;
    v_d_val DATE;
    v_ret   NUMBER;
    c       NUMBER;
    d       NUMBER;
    col_cnt INTEGER;
    f       BOOLEAN;
    rec_tab DBMS_SQL.DESC_TAB;
    col_num NUMBER;
    v_filehandle UTL_FILE.FILE_TYPE;
    v_samefile BOOLEAN      := (NVL(p_data_file,p_header_file) = p_header_file);
    v_CRLF raw(2)           := HEXTORAW('0D0A');
    v_chunksize pls_integer := 8191 - UTL_RAW.LENGTH( v_CRLF );
  BEGIN
    c := DBMS_SQL.OPEN_CURSOR;
    DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
    DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
    --
    FOR j IN 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
      WHEN 1 THEN
        DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,4000);
      WHEN 2 THEN
        DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
      WHEN 12 THEN
        DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
      ELSE
        DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,4000);
      END CASE;
    END LOOP;
    -- --------------------------------------
    -- This part outputs the HEADER if needed
    -- --------------------------------------
    v_filehandle := UTL_FILE.FOPEN(upper(p_dir),p_header_file,p_utl_wra,32767);
    --
    IF p_gen_header = TRUE THEN
      FOR j        IN 1..col_cnt
      LOOP
        v_finaltxt := ltrim(v_finaltxt||p_delimiter||lower(rec_tab(j).col_name),p_delimiter);
      END LOOP;
      --
      -- Adding prefix if needed
      IF p_prefix IS NULL THEN
        UTL_FILE.PUT_LINE(v_filehandle, v_finaltxt);
      ELSE
        v_finaltxt := 'p_prefix'||p_delimiter||v_finaltxt;
        UTL_FILE.PUT_LINE(v_filehandle, v_finaltxt);
      END IF;
      --
      -- Creating creating seperate header file if requested
      IF NOT v_samefile THEN
        UTL_FILE.FCLOSE(v_filehandle);
      END IF;
    END IF;
    -- --------------------------------------
    -- This part outputs the DATA to file
    -- --------------------------------------
    IF NOT v_samefile THEN
      v_filehandle := UTL_FILE.FOPEN(upper(p_dir),p_data_file,p_utl_wra,32767);
    END IF;
    --
    d := DBMS_SQL.EXECUTE(c);
    LOOP
      v_ret := DBMS_SQL.FETCH_ROWS(c);
      EXIT
    WHEN v_ret    = 0;
      v_finaltxt := NULL;
      FOR j      IN 1..col_cnt
      LOOP
        CASE rec_tab(j).col_type
        WHEN 1 THEN
          -- VARCHAR2
          DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
          v_finaltxt := v_finaltxt || p_delimiter || v_v_val;
        WHEN 2 THEN
          -- NUMBER
          DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
          v_finaltxt := v_finaltxt || p_delimiter || TO_CHAR(v_n_val);
        WHEN 12 THEN
          -- DATE
          DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
          v_finaltxt := v_finaltxt || p_delimiter || TO_CHAR(v_d_val,p_dateformat);
        ELSE
          v_finaltxt := v_finaltxt || p_delimiter || v_v_val;
        END CASE;
      END LOOP;
      --
      v_finaltxt               := p_prefix || v_finaltxt;
      IF SUBSTR(v_finaltxt,1,1) = p_delimiter THEN
        v_finaltxt             := SUBSTR(v_finaltxt,2);
      END IF;
      --
      FOR i IN 1 .. ceil( LENGTH( v_finaltxt ) / v_chunksize )
      LOOP
        UTL_FILE.PUT_RAW( v_filehandle, utl_raw.cast_to_raw( SUBSTR( v_finaltxt, ( i - 1 ) * v_chunksize + 1, v_chunksize ) ), TRUE );
      END LOOP;
      UTL_FILE.PUT_RAW( v_filehandle, v_CRLF );
      --
    END LOOP;
    UTL_FILE.FCLOSE(v_filehandle);
    DBMS_SQL.CLOSE_CURSOR(c);
  END create_large_csv;
  

• Batch export data to PDF files

  Hello all,.

  I will receive a large number of forms filled with customers, and I need to load the data into an Access database. I know how to export data from a PDF file to Excel or XML for the migration of a database, but is there a way to batch-export data from a number of PDF documents at the same time?

  Steve

  A simple way to create a single file that contains all of the plug a range of responses is to choose "forms > manage form data > merge files into the spreadsheet" in Acrobat. You can select CSV or XML.

  You can also use VBA in Access code to open each PDF file programmatically, extract data and write to the database. It's methods IAC (Communications monitor) and perhaps the Forms API and/or the JSO (JavaScript object). More information is in the Acrobat SDK SDK documentation: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/js/html/wwhel p.htm? href = JavaScript_SectionPage.70.1.html & accessible = true

• How to load flat files without header to table in ODI

  I try to get data from a flat file, but it doesn't have any header

  as 1, tom, 36, usa.

  I have a table with id column, name, age, country, and I want to get the data. Please let me know how to proceed.

  Thanks in advance

  If you add columns manually in the data model there is no need to reverse engineering. If you reverse engineer with header set to 0 ODI will simply give the columns arbitrary identifiers such as C1, C2, C3 etc. That you can leave or change.

• Create a flat file reconciliation events - a matter of design

  Hello
  
  I am currently evaluating an existing implementation of IOM to rebuild using OIM 11 g and have questions about the ideal method to create events for the reconciliation of a flat file.
  
  The current implementation uses a web service call to process a flat file and creates reconciliation events. It runs every hour.
  
  Although this looks cool, but I thought there was no need to go as far.
  
  If IOM cannot consume the flat file directly, which means that if he needs massage data, I can always load the flat file data in an external table, write a pl/sql procedure to transform the data and put it into a global temporary table, and create events of reconciliation like that.
  
  What would be the ideal method to load data from a flat file in IOM?
  
  Thank you
  
  Khanh

  If it is a flat file, then watched GTC option? And why no staged between the two? IOM can read flat files very well either through GTC or write your own recon code.

  -Marie

• Loading flat file in planning in ODI

  Hello
  
  I'm trying to load data from a flat file into the planning with ODI. When I create the model planning and try to reverse using the knowledge RKM Hyperion Planning module, I get an error in step 2 of the process: start the reverse.
  
  This is the code in the Description tab in the operator:
  
  from java.util import HashMap
  import java.lang Boolean
  from com.hyperion.odi.common import ODIConstants
  from com.hyperion.odi.common import ODIModelImporter
  from com.hyperion.odi.connection import HypAppConnectionFactory
  
  #
  source # planning of the connection properties
  #
  serverName = "epmdemo."
  userName = "demoadmin".
  password = "< @= snpRef.getInfo ("SRC_PASS") @ >.
  request = "PhysPrac."
  
  srvportParts = serverName.split(':',2)
  srvStr = srvportParts [0]
  portStr = srvportParts [1]
  
  #
  # Set connection properties and initializes the charger of planning
  #
  srcProps = HashMap()
  srcProps.put (ODIConstants.SERVER, srvStr)
  srcProps.put (ODIConstants.PORT, portStr)
  srcProps.put (ODIConstants.USER, userName)
  srcProps.put (ODIConstants.PASSWORD, password)
  srcProps.put (ODIConstants.APPLICATION_NAME, application)
  
  iMod = 10001
  
  connection of planning #get
  hApp = HypAppConnectionFactory.getAppConnection (HypAppConnectionFactory.APP_PLANNING, srcProps);
  
  #get connection to the repository
  repCon = odiRef.getJDBCConnection ("DEST")
  
  #
  # START THE REVERSE
  #
  odiModelImporter = ODIModelImporter (imod, hApp, repCon)
  odiModelImporter.importModels)
  
  
  and the error message from the explanation tab:
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (innermost last):
  "< String >" file, line 17, in there?
  IndexError: index out of range: 1
  
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.k.a (k.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt (SnpSessTaskSqlC.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  at com.sunopsis.dwg.cmd.e.k (e.java)
  at com.sunopsis.dwg.cmd.g.A (g.java)
  at com.sunopsis.dwg.cmd.e.run (e.java)
  at java.lang.Thread.run(Thread.java:595)
  
  I should mention that I am a beginner with ODI.
  
  Thank you
  Adina

  Are you sure put you the port number of the rmi in the topology Manager, it does not appear that you have
  When you set the server in the topology for the Planning Manager is servername:11333
  For example:-http://4.bp.blogspot.com/__2AaArK5lW8/SNZicAzzHQI/AAAAAAAAAZw/zIdHfP0tnew/s1600-h/8.png

  See you soon

  John
  http://John-Goodwin.blogspot.com/