Wanted M6 Notebook PC: Switch Audio Beats and graphic equalizer do not work after 10 can I upgrade

Similar Questions

• Dolby Advanced Audio V2 graphic equalizer does not work after Windows Installer 8.1.

  Hello

  I have a HP Pavilion G6-2252sa laptop running Windows 8 and I just installed 8.1. Everything is OK, except the equalizer function in Dolby Advanced Audio V2 no longer works. You can always move the sliders of the equalizer, but the actual sound quality remains the same. It sounds flat as if all the sliders are always set to zero. I use mainly my laptop for music, so this problem is a problem for me.

  Anyone knows a solution please?

  Hi @Roygbiv

  Welcome to the Forums of HP Support!

  I understand that you are having problems with the passage of the equalizer of Dolby Advanced Audio V2. I'm happy to help you. Initially when you upgraded to windows 8.1 has update you the audio drivers for windows versions 8.1 for your laptop?

  If not, you can find them here: drivers PC laptop HP Pavilion g6-2252sa

  Another thing I would try is after update audio drivers, would be uninstall and reinstall the software Dolby and see if that helps.

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• After 10 Windows Installer on Audio SW5-11-18R3 and the camera will not work. How can I fix?

  Tried the upgrade of Windows 10 initially, but it failed with "lack of disk space", then installed full media and all but the Audio and the camera does not work.

  Hi all

  I would just like to make the point that there is a fix that has been made available and applications for a Windows Update is also underway. I'll link directly to the file located on our page drivers and downloads.

  
  
  
  
  
  
  
  
  
  
  
  
  

  Patch

  Acer

  1. fix camera function fail after upgrade to Win10 TH2.

  20160506

  91.7 MB

  30/05/2016

  Download

  Thank you
  Cory

• I don't know how i ' v, but I lost the toolbars at the top and bottom. [Alt] will not bring up the toolbar and scroll keys do not work. How can I fix it?

  I managed to hide the toolbars, ALL of them. [Alt] brings to the top of the toolbar so that I can change them. In addition, the [previous page] [next page], [home] and [end] keys do not work.

  You can have:

  1. Choose the Mode "full screen" or
  2. unchecked toolbars

  The F11 key activates / turns off Mode full screen or not. Full screen, you have no toolbars, no tab and no bar Add on (bottom).

  • See-> http://kb.mozillazine.org/Netbooks#Full_screen

  If unchecked you your toolbars (checked = displayed; UN - check = not displayed), and then do one of the following, then click on those you want to check/uncheck:

  • Right-click in the empty space at the end of the tab bar
  • Press the ALT key or the F10, the poster Menu bar, click View > toolbars
  • Firefox button > Options
  • Hold down the ALT key and type the letters of the keyboard V T
  • See-> https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing
  • Also see-> https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
  • Also see-> http://kb.mozillazine.org/Toolbar_customization

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Internet and the sound does not work after uninstalling programs, System Restore also not work.

  I noticed that my computer felt a bit slow so I uninstalled a few programs that I knew were not very helpful so I restarted my laptop, and then the network and the sound does not work.

  I tried to use the system restore, but that does not work either and I tried to online solutions, but nothing works.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• wireless adapter is gone and the extension display not working after hibernation

  my laptop is a thinkpad X201s, os is windows 7, 32 bit, ultimate, English

  I used wireless home and my laptop is discharged, it is put into hibernation automatically

  the next day, I went to the office, plug power adapter and turn on the computer

  then I found wireless does not work, so I opened 'Control network and Internet\Network connections', there is no wireless icon. then I open "Device Manager", there is no wireless network adapter in network adapters

  and another bad thing is when I extend my screen with another monitor, the second screen shows nothing and the monitor does not work, it does not work in another computer, it seems necessary to fix. but it works before

  and I change a new monitor to connect my laptop display of the extension does not work, but the monitor can work in another computer, that's fine.

  and I restarted computer, no help.

  Finally I found the solution for wireless, first computer shutdown and plug-out the power adapter (it is very important), wait 30 seconds, then plug power adapter and restart the computer, wireless, great work

  now, the extension display function still does not work. I guess that the display extension PIN does not work, maybe need repaired

  Hi Jacky,.

  First of all we apologise for the late reply,
   
  As seems to be problems with the extension display port, I suggest you to contact the manufacturer of the computer.
  http://support.Lenovo.com/en_IN/feedback/contactsupport.page
   
  Please come back incase of any queries.
  Thank you
  Jayant.

• HP Envy 17-j020us: audio Beats and backlit keyboard does not

  Hello. I bought a HP Envy 17-j020us on ebay, used laptop, about two weeks ago. They said that it is only 4 months. I must say that it is a little new. In any case, they had updated to 8.1 Pro Win. I think that when they have updated they lost Beats audio drivers or something, because the sound quality, I really look forward to, is less poor and there is no equalization anywhere. In addition, the keyboard which is supposed to be an impressive show backlit to see... is not backlit.  So, I could be wrong... but I really think it's just a matter of some drivers or something simple because of the upgrade. Can someone help me please? And please speak in plain English, because I'm not very good at computers. Thank you for your time and your consideration.

  Hello:

  Plug

  The feature audio beats is installed when you install the audio driver.

  Try this-

  If you have not yet done, download save & install this driver Chipset. Restart the system once the installation is complete.

  Then, download save & install this driver IDT audio. Restart the system once the installation is complete.

  Source: Software & drivers

  Your computer keyboard laptop are not equipped with a backlit feature - it will be mentioned in the keyboard usually column.

  Keyboard

• Help that I have no audio device and my USB does not work :(

  Help me I have no audio device! All I did was put my laptop on the table and it turned off. When I turned it back on, it says that I have no audio devices installed. Ive tred reinstall and back and to update, but it did not work. Also, it is not detect my USB when I plug the power cord for my mp3 player and when I plug my network card. Can someone help me? I have windows XP and I have an IBM Thinkpad

  Hello

  • Is - what sound card is recognized in the BIOS?

  You can check these links:

  No noise in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

• Internet and the sound does not work after the ATU Vista 64-bit

  I really didn't want to display in the hope I would find the answer using Google, as I did in the past, but this one i can not find the answer for.   2 days ago I d/l a program called Advanced System Care. I was told by 3 of my friends it works well to clean your junk files, Defragging ect ect.

  After d/l and the operation of the program, I had to leave and shut down the system. Today I start everything is fine, and then I noticed that I have a red X on my speakers. This is not the red X you get when cut there a smaller lower-right next to the speaker in the toolbar. When I mouse over it, it says "Service Audio work not" when I click it to repair, so good it shows all is working (volume mixer control is non-interactive) then I go to control panel and click on the speaker and I get "this computer cannot play audio because the windows audio service is not enabled.»   You want to enable "I click Yes and it brings back me just in the region, that I was when I clicked on the small speaker in the toolbar with the red x.»  Everything always looks the same as it was when I put in place.

  Is there anything else I can look?

  Second problem happened at the same time.  I have the same red x on my 2 computer screen in the toolbar on the bottom right. When I try to repair it it says this "this service cannot be started because it is disabled or because it has no enabled devices associated ' when I go to Device Manager and check to see if it is still showing my d-link wireless there is black! on a yellow background. When I try to access the computer to find local internet connections, it says that it can't find. I know that my Linksys is working because my Iphone is connected.  I already tried to install a cord between my router and my system and it still does not notice the internet even when you try to reconfigure.

  I read where I can make a dirty windows vista installation and fix it. but I really hope that there is a better way.  I also tried to restore my computer to last week when I made a back up and it seems after the use of this program, that he got rid of that as well. So now im out with to be able to roll back before I D/L this close program useless lol

  I'm using Vista ult 64 bit, that the computer is built for gaming and music. OCed Q6600 to 3.2 4gig ram 8800gt 2 in sli on a configuration card XFX mother if any other system or other questions please do not hesitate to ask.  I hope that someone has had this problem and can help me to solve it.  I don't want to reformat my HD or what I really want to pay Microsoft to talk to them on the phone

  Thanks for your help

  After 3 hours on the phone with the microsoft problem solved. Seems some how using CSA and the update of microsoft it limited my computer to start all programs at startup.

• Satellite U500-1F5: eco and FN buttons do not work after BIOS update

  Hello world

  I hope I can find a solution for my problems here.

  I bought a new Toshiba Satellite U500 (PSU9ME),
  I'm updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center.

  Last week I received an alert to updat the BIOS and I did. Since then, I've noticed the following problems:

  1 eco utility does not work, and when I tried to uninstall, it says (not supported BIOS)
  2. on screen funtion buttons that appear at the top of the screen when you press the Fn key no longer not apear
  3. the touchpad lock / unlock button does not work, and even by pressing Fn + F9 doesnot lock

  I hope you can give me an answer about my problems,
  I already downloaded the latest updates for the eco and value-added packege of the toshiba site and install,

  BUT

  does not my prob

  still eco utility does not work. The msg (not supported BIOS), appear when I run the update.

  The bar of buttons on the top of the screen does not (even after I uninstall the package of value of toshiba and re - install the last being) and the locking/unlocking back touch button does not work.

  I hope Toshiba can find me a solution, coz I don't have time to go to the DEPOT
  PSU9ME00D00XAR model U500-1F5

  Windows 7 (64)

  Thanks in advance

  Hello

  First one comment:
  * I am updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center. *
  That s is nice, but certainly not necessary. When the system is working, do not touch or change anything. Maybe stupid sounds now, but I recommend you to remove the TEMPRO system. Believe me you don't need. I have 2 years old Satellite A300 and original BIOS. It works perfectly and I don't want to take any chances and to change what anyone. Since last month, I have the Satellite U500-1EX and will do the same. TEMPRO is already removed, and I am happy with the factory settings.

  All that you have done is OK, but at least you can try to reinstall entire OS now using HDD recovery option (F8 at startup) to see if everything works well again. Sorry, but if this will not help, I think that you need the BIOS downgrade to the old version.

• Keyboard and the mouse do not work after upgrade to Windows 7.

  The operating system on this computer is Windows 7 Professional (64 bit), and the following updates are available:

  MS Security Essentials:
  Update for Microsoft Security Essentials - 4.7.205.0 (KB2994766) - Important

  Windows 7:
  Cumulative Security Update for Internet Explorer 11 for Windows 7 for systems based on the x 64 (KB3021952) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3004361) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3004375) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3013455) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3023562) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3029944) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3031432) - Important

  Update for Windows 7 for x 64-based systems (KB3004394) - recommended
  Update for Windows 7 for x 64-based systems (KB3020338) - recommended
  Update for Windows 7 for x 64-based systems (KB3021917) - recommended

  X 64-February Windows malicious software removal tool (KB890830) 2015 - Important

  The problems begin after that I installed these updates. After restarting the computer, I can no longer use my (HP SK - 2506 U) keyboard and mouse (Microsoft Wheel Mouse Optical). I have looked around through the forums and tried several suggestions; However, none have them worked, that's why I post here.

  For example, here are the methods that I've tried so far, while using a PS/2 keyboard connected:

  (1) to start the computer in safe mode only to find out that they keyboard and mouse don't always work.

  (2) went in mode Bios and the keyboard works until I leave.

  (3) Microsoft Fix It tool I tried for USB devices and he said that "the changes have been made", but it does not solve the problem.

  (4) I went to the Control Panel, type "Troubleshoot" > find and fix problems > material and audio > configuration of a device, and he says: "material changes may not have been detected."

  (5) download the drivers on their site, but they will not be installed because 'the latest version is already installed. "

  6) going to remove each USB root hub in Device Manager, and then restart the computer to reinstall the drivers. The computer recognizes the 'new' devices,
  but then fails to install. Also, when I check their error on each of the USB status then in Device Manager, I get an error (code 52).

  (7) I also tried to install an update, restart the computer and then install the update next to try to reduce down which one is causing the problem. However, this method does no more work. For example, I installed an update, then restarted the computer, and it would be nice. Then install the next update, and the problem would come back. I would therefore restore to a point earlier, thinking that the second update has been the cause of the problem only discover that the problem came back after first re-installation...

  I also tried to run a backup of my external hard drive, but it does not work. I also tried to create a system repair disc, and it fails too.

  So far, the only way I can "fix" this problem is if I restore my computer to an earlier point in the day and then hide all updates to install automatically.

  Now I'm wondering if anyone knows why these problems are happening or fix them for good?

  Hi Floyd,

  I appreciate the efforts that you have taken to solve the problem in a few important steps. Since it is a problem that occurs when you try to install updates for Windows, the driver may be signed or corrupted.

  Just a few questions in order to get a clear picture of the issue.

  1. make all the windows updates installed successfully?

  2. What is the full error message you see in Device Manager?

  Follow the thread and check them off below if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-code-52-USB-ports-not-recognizing-connected/2379017c-D513-478C-A184-0d1b7cd408b2?page=1&TM=1424751616733

  I MPORTANT this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  If the problem is not resolved, you can put the computer in a clean boot and check if it helps.
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135
  Note: after the boot minimum troubleshooting steps, see how to reset the computer to start as usual after a clean boot troubleshooting.

  Get back to us if the problem persists.

• I can't read the words of the security and the sound does not work. How can I complete the configuration of the synchronization?

  How anyone can read the enigmatic words for synchronization of the configuration is beyond me. Just audio does not work. If not, how can I transfer my cache settings, including passwords for sites in my new computer?

  Hello

  You can try after some time. To check possible synchronization problems, please see this.

  Alternatively, you can manually transfer the necessary personal data.