EXPORT ONLY THE CONSTRAINTS.

Similar Questions

• Export only the hierarchy names & properties hierarchy

  Hi all

  Is there a way to export only the hierarchy properties associated with this hierarchy in a database table and the name of the hierarchy? For example, I have a group of hierarchies HG1 who has 10 hierarchies H1, H2... H10. Each hierarchy has 3 properties of hierarchy that are associated with, HP1, HP2, HP3. Each hierarchy has also its own set of branches and leaves. Is there a way I can export only H1, H2... H10, as well as the property of hierarchy associated with each hierarchy in a database table in a format something like below:

  Name of the hierarchy	Property1 (HP1)	Property2 (HP2)	Property3 (HP3)
  H1	some value	some value...	some value...
  H2
  H3	..
  H4
  ...
  ...			..
  H10			..

  Thanks in advance

  Create a hierarchy export, select the choice of the hierarchy as "Group of the hierarchy" and select the respective hierarchies group, put the filter as a level 1 is, that will give you only one record for each hierarchy and select the required properties columns, it should work for you.

• I need a file to an exact width and height and it must be in png format, because it allows to translucency. My graphics are only the top of the page and when I export only the graph is not exported the entire file. How can I get the entire file to ex

  I need a file to an exact width and height and it must be in png format, because it allows to translucency. My graphics are only the top of the page and when I export only the graph is not exported the entire file. How can I get the entire file of export including blank parts?

  in the export dialog box, you have chcked 'use of work plans? ''

• I have a LOT of different Indesign CS6 documents that are field guides, and I would be able to export only the names of species (bold italic)

  Hello

  I'd appreciate any help I can get.  I have a LOT of different Indesign CS6 documents that are field guides, and I would be able to export only the species names (in bold italics) of documents so that I can put in excellent to make a comparison and produce a comprehensive list.  There are several areas of text for each page/species.  The species name is in a single text box, so it is possible to somehow only the bold italics to export a document?  I have a bad feeling, but I thought I'd ask anyway. Thanks in advance for your time and interest.

  Maggie

  Also, sorry if my original question has not obtained the Chief... I'm new to this forum.

  It would certainly be a job for a written custom script. Without scripts, I might consider using the Index feature in InDesign. Indexing is manual work very well.

• Export only the selected rows of a partition

  Hello
  
  Is there a method to export only the selected rows of an artition using export utility
  
  Thank you
  Lbn76

  See http://docs.oracle.com/cd/B28359_01/server.111/b28319/dp_export.htm#BEHEJDBE

  Concerning
  Karan

• Export only the desktop version of the site, mobile version not

  Can I export just the desktop version of my site and not the mobile version with it? I am busy working on my still of mobile site, but the work is done on the office site which must go live every day.

  Hello

  You need to do 2 things for it.

  1. click on 'office redirection' of site properties to remove the exported files of redirection codes.

  Do please go to file > Site Properties > provision > phone > uncheck "Desktop Redirection"

  

  2. after the export of the site in HTML format, delete the folder named like 'Phone'that contains all your phone configuration files. Rest of the files are for desktop PC.

  Concerning

  Vivek

• export only the layers visible illustrator in png

  I try to save illustrator layers specific and visible in a png (for placement in PPT) file.  However, all of the layers in the document continue to appear in the png.  I even went in and deselected layer options 'show' and 'print' and they all will continue to appear. What I am doing wrong?  Is the only option to save as a jpg file? The ultimate goal is to be able to save the layers transparent for placement in PPT as relies.  Any help/info would be appreciated!  Thank you!

  I don't see a function to export of goods.  My art Board is created to measure and I was using ' file - export as "png, but I now try to save to the Web option.  Thank you.

• EXPORT ONLY THE TABLES IN A DIAGRAM WITH THE HELP OF DATA PUMP

  Hi people,
  Nice day. I'd appreciate if I can get a data pump command to export the TABLE object in a specific schematic.
  The server is a node RAC 4 with 16 CPU per node.
  Thanks in advance

  If all you want is table definitions, why can use you something like:

  expdp username/password = mon_repertoire dumfile = my_dump.dmp direcory tables schama1.table1, schema1.table2, happy etc = metadata_only = include = table

  This will only export table definitions. If you want the data, and then delete the content = metadata_only, if you want the dependent objects, such as indexes, table_statistics, etc, then remove the include = table.

  Dean

• is it possible to export only the members?

  Hello
  
  IM wording if theres a way to extract the data from planning/essbase for specific members only? (without using the smartview)
  for example, if I want all the data for FY11 budget

  Take a look at the DATAEXPORT command which can be used in calc scripts/rules > http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/dataexport.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Dynamically export data only the differential on a daily basis

  Hi all

  How should design exports as it pushes only new data added that day downstream? For example, if I export a hierarchy that is updated by users per day and my work at 18:00 every day. I want to export only the nodes that have been added so far here or if updates have been made for them that day. I tried to use last modification on as a filter that worked, but I was not able to exploit this filter to make my dynamic export without updating every day.

  What Miss me?

  Thank you
  Sam

  Sam,

  This looks like a delta process, while there may be other ways to achieve this, evil sticks to your approach.

  Create a derived string Type local property say Custom.Prop1 with this logic.

  Equals (String, format (mm/dd/yyyy, date, Now ()), format (mm/dd/yyyy, date, ChangedOn ()))

  
  

  then in your hierarchy of export create a filter to search for the Custom.Prop1 is equal to True.

  
  

  See if it works for you.

  Thank you

  Denzz

• Export only keyframes

  OK, I don't know if it is already a device, if there is a plugin that does this or if I should just drop off as a request for feature/desire.

  The background:

  The workflow I discovered that runs the best for me is the following. Animate in Flash (now animate). Can I export as PNG files and import those first do overlay graphics and calendar and sound. And if need be I push the clip through after effects to make the finishing touches.

  The issue/obstacle:

  As I animate I have to animate virtually only one image by image key. This so that when I export I don't end up with a ton of duplicate PNG files. Of course, I can work with that in mind but the preview of images and loops becomes quite difficult especially when I have several animation layers animating at the same pace.

  example:

  L4: Layer of hair (a loop of framework 6 keyframe animated in three)

  L3: Layer of body (with maybe a 5 image in the middle of the second 5 animation tour)

  L2: Animation wallpaper (a Cape beat loop animated two for example)

  L1: Natures background

  For now, I have to do these three and two in those and kind of guess how they'll end up watching when I export them finally.

  What I want:

  I want to have some sort of option to export the sequence image exporter to export only the keyframes. Not the double frames. Just a checkbox that ignores any possibility of duplication and interpolation. If the image is a keyframe, export it. If it's something else. Do not.

  Bonus:

  If possible, it would be good to have an export the layers separately check box automatically. Right now, I have to go manually check and uncheck the eyes (visibility) of all layers to export layers. It would be great just check a "export layers separately" and it will look just the timeline. If the layer is visible, it is exported with a change to the name of the file. Like L01, or something. If the layer is invisible. Just ignore it.

  This way I can press the export button and it will spit on all concerned managers.

  Filename_L01_F001.png for example.

  Then...

  That way, everyone here know a feature like this? Or even a plugin that I can get that done?

  Sure that there is no everything simply because this is not how to animate is supposed to work, BUT you can probably do with JSFL somehow. I do not know kglad can point you in the right direction.

• SessionUtils.ExportSession - export only known and inferred values?

  Hello

  The SessionUtils.ExportSession method appears in support of two ways to export data from interview:

  (1) only known export, data provided by the user

  or (2) export data provided by the user, unknowns and deducted.

  Often, the amount of "unknown" data can be lengthy and is unknown, it generally does not provide a lot of value in a perspective of integration; pass data just unknown around in an XML object can be cumbersome.  And export only the data provided by the user is not particularly useful in integration scenarios where a value is updated based on the ability to infer the OPA.  Is there a way to export only the known (user-supplied) and inferred values, while ignoring the unknown?

  We currently take in charge "verbose" or not detailed in option for the ExportSession.

  If your concern is storage or transmission, maybe you could look at an intermediate step that eliminates the elements of undesriable.

• Export only select rows in a table in excel sheet

  Hello
  
  
  I have a listener to export a table. Is there a way to export only the selected lines in the table rather than all the lines?

  for the exportCollectionListener the exportedRows the value = "selected".

  check
  http://download.Oracle.com/docs/CD/E12839_01/apirefs.1111/e12419/tagdoc/af_exportCollectionActionListener.html

• Can I export only conditional text 'show' for a mif?

  When I export a document with conditional text to a pdf file, just the conditional text which has the value 'show' (and the unconditional text) appears in the pdf file.  It's good, but I want the same thing when you export a mif.  There are two reasons for this:

  (1) we have an internal tool that analyzes a mif and retrieves the data in some tables to fill a database.  The tool is not analyze PDF files.  And the tool does not always correctly, manage conditional text lines conditional in particular the table text.  The tool will work fine if the conditional text was already "solved" when exporting to the mif.

  (2) I would use the Boolean logic for conditional text, which is available in FM9 but I need to supply files to other groups in society who use FM7.  Their FM7 wouldn't show conditional text correctly if it depends on nothing else than to the logic of the GOLD.  But they would be happy to accept files mif which had no conditional text because it had been "resolved" when I generated a file mif7 for them.

  I tried different ways to convert a pdf into a mif file, but no process seems to preserve the formatting and text editable. I'd be ready to accomplish this somehow roundabout on Framemaker, Acrobat Pro or another tool.

  But the happiest result for me would be to discover that FM9 already has the ability to export only the conditional 'show' and the text unconditionally to a mif.

  Or is it possible to make a copy of the document and then somehow automate the removal of conditional text 'hide' and 'show' unconditional conditional text conversion?

  doc_engineer,

  You could manually delete the conditions hidden from the files before the Save as MIF, by choosing the option remove all text hidden as well. If you want to completely automated, however, you need to perform some shows, in which case I would recommend setting your post-processing tool in order to recognize the conditional text correctly, rather than make FM do something which is less-than-optimal, IMHO.

  Your best bet of all would be to abandon the MIF format altogether and use a structured XML author, with which you can use for the conditional metadata attribute values. With this, you could also abandon the model of FrameMaker condition for a much more robust system of conditionalizing content tag. It would be more flexible and certainly easier to design the post-processing step, as there are many tools available for the treatment of XML metadata and the ability to analyze the attribute values is commonplace among them.

  Russ

• Why make the audio for the whole sequence when you export only a small section?

  If I export only a small part of my calendar, why the first emphasizes the provision of audio for the entire timeline?

  Normally this wouldn't be a problem, except that my timeline has tons of audio on it and the window "made necessary Audio Files" may take 5-10 minutes.

  Here is the link Jim referred to as:

  Feature request/Bug Report Form