Export PDFs single page with the name of the page

Similar Questions

• Export a document multi-page of InDesign to PDF single page but with unique filenames using scripts

  Hello

  I use InDesign 5.5.

  My goal is to export an InDesign MultiPage as single page PDF files, but every single PDF must be named uniquely.

  For example;

  InDesignFileName_487275123.00.pdf

  InDesignFileName_734876882.00.pdf

  .. and so on.

  I spent a lot of time searching online and the closest I found is the software called exit factory that works very well.

  Factory works by placing a title of script in a textframe on the master page in InDesign. Then everything that is typed in the text on each of the separate pages block sets the file name of each separate page.

  However if I can solve this problem without any investment cost my boss will be very happy

  I found PEU5 that works very well for export as single pages, now it's name every single PDF, but I don't know anything that would you like to create a script, but I get the gist of what they are doing. I understand that a script could solve the second half of my problem.

  Can anyone help?

  Thank you.

  S

  Maye it works for you:

  http://www.kahrel.plus.com/InDesign/pdf_individuals.html

  Peter

• Can I export a single page in jpg format from the module of LR book?

  I only see the option to export the entire book as individual jpg.  If I make a single change to a single page, to get the revised page as jpg seems to me export the entire book again. Is there an easier way to get the update page jpg file?

  Alan

  Hi Alan,

  No, you cannot export a single page of the book Module.

  However, you can try the following suggestion if you have a book with a smaller number of pages:

  Duplicate the book in the Collections Panel (right click > book duplicate) > then choose the book duplicate > edit the required page and delete all the pages except that you want to export > choose export to JPEG.

  Kind regards

  Claes

• Cannot export to single pages facing pages

  Hello

  I have a 60 page document + that I created to deal with pages. It is a magazine, so I had to work in spread because much graphics extend over two pages.

  My problem is that I was invited to make the final PDF file 'single page' - spreads. Each page must be hers.

  I tried to turn off the coast facing pages under the heading "Configuration document", but it did not split graphs that spans two pages (IE, I have a header that covered two pages and when I turn off 'facing pages', the header is attached to the 'left' page and space where half right of the image should be is not in the "right" page.) I understand that it is an object, but there should be a way for her to 'split').

  I can't find another way to transform the export of single pages. I either export it to PDF and get "spreads" (two pages face-to-face somehow transformed into a long page) or I lose half of my content.

  I'd appreciate any help - it's a huge head and rather sensitive time.

  (By the way, I had this problem once before, when I was more inexperienced.) I did save two versions of the file: 1 vote against and facing pages and the other with facing pages turned off. Then I copied the 'spread' from the 'facing pages' file and pasted on the page "right hand" of the non-pages file (it's the cut part of the graphcis that spans two pages). I don't know if I explained that very well. It of obviously awkward, takes a LOT of time and spatial memory (which causes my system to slow down a lot), and I found myself with a couple of headers that were a couple milimeters off.  I feel that I'm totally missing something: I think that the duty to spread fashion design and have the file finished in simple pages would be a common thing to do).

  I'm starting to see a trend where new users seem not to grasp the concept of what is a "page", and what is a gap. A page's layout unit, that you specify in the settings of the documents, if arranged as connected or not. A gap is a page or group of pages that are accessed by side (the first page of a book is laid out as a single page spread, for example, with pages double suite). Spreads are constructed from the pages and are a convenient way to work, allowing you to see that a reader will see in a finished printed publication and work in related pages in a single view, but they do not have magical powers to change the size of the page, just because you're looking at the two pages together.

  Pages in spreads remain independent pages. They can be moved to new locations without moving their companions, and when you print or export (with the exception of the interactive PDF in CS5 or later) by default, you get simple pages, no matter how they could be organized on the screen. You define documents as pages face to face time to display the "spreads" as a unit while you work and be able to create a "handedness" in the provision, i.e. pages that are distinctly to the left or right clearly, based on the number of page. This means that you can have different margins or headers and feet, or other objects as the color bars on the two halves of your broadcast, and that these things can be put on the master pages to apply automatically.

  If you start using pages face to face, your default master page is a double page that can accommodate this handedness. If later, you go to the preparation of the Document and uncheck the facing Pages to break out "spreads" you also lose the ability to use the left side of your master page and and if there is no asymmetry in your layout will be lost, and your document will be destroyed, then uncheck face pages prior to export is both unnecessary and a very bad thing to do.

  STIX said, if you export PDFS for printing, there is nothing special at all you need to do to get the unique pages. Just make sure that you did not check the box of spreads. Interactive is a little different. The box was apparently omitted design with the default state set to export pasta to spread (sometimes the engineers do not understand how we work as designers), but there are two approaches to the problem of spreads for export unique to interactive PDF pages. Script he mentions is easy and practical and changes the State of the missing box and is probably what you want, but it is also possible to "split" a spread in individual left and right spreads errors and they will export this way regardless of the State of the checkbox. "" The method is described in InDesignSecrets "Blog Archive" Pages Breaking Apart to bleed off the coast a spine

  One caveat, however, using the "spreads" split, is that objects that cross the spine are on one page or the other when you are done, not on both pages, so you must copy the and paste in Place where they are absent on the opposite side.

• Is it possible to create the icon PDF format display with the cover of the document image, when sending via "Mail" on a mac?

  Is it possible to create the icon PDF format display with the cover of the document image, when sending via "Mail" on a mac?

  InDesign has no control on how Apple Mail displays a PDF it creates.

  My experience is that Mail displays a preview of a single PDF page, but not a multiple page PDF. In addition, for a single page PDF, the user may tip if the PDF shows a preview by right-clicking the icon/preview.

• Creating PDFs single page of a brochure designed to extends format

  Hello

  So, I have been asked to take a brochure located in the pasta spread and save each Panel in a single pdf page. So, basically, in document format, page size is 17,75 x 8.5).  There are four panels, each Panel is approximately 4.3708 x 8.5. The problem is, each Panel was not created as a single page in indesign... instead, it is established as a 17.75 paper 8.5 x and the panels are created in this size of document.

  I guess I want to know if there is an effective way to create these pdfs single panel with what I received.

  Does anyone know?

  It is either copy/paste in a facing-page document correctly laid out (the best choice if he needs editing in the future), or place the pages, each twice, in a doc pages pages face and crop the bad half out of each page. In both cases, you need to rearrange the pages spread in readers.

• How can we do a single element with the content of two clips

  How can we do a single element with the content of two clips

  You try to get a picture of image? In other words, that contained two visible clips at the same time? If you are, change the substantive item to you main plot and another tie on top using an edit connect to the battery. Select the top item. Activate the transform tool and resize and reposition the clamp if necessary.

  Russ

• Export interactive PDF in indesign, with the animation of the edge to the SWF file?

  Hello

  I have an interactive pdf in indesign with animation, works very well when they are exported to the swf file.

  I need to use more complex animations that Indesign has, so I created some new features of Adobe Edge animate, exported save them as a file .oam and then put them in the Indesign file.

  If I use the Preview on the animation tab I see indesign animations and the edge, but if I export it to a SWF file is - this only animation to indesign working, and if I export to epub file is only the edge animation work.

  Somehow it is possible to export so that the two works of animation types. and it is possible to do it in a SWF file.

  I have Creative Cloud 2014 for both programs

  Thank you!

  NO.

• Captivate 8: PDF export created a file with the extension PDF... but it's actually a video. Shouldn't it exported slides as appropriate PDF document?

  In Adobe Captivate, there is a 'PDF export' checkbox when you publish your project.

  He checked the box, and the publication of project created a file with the extension PDF... but it's actually a video. Shouldn't it exported slides as appropriate PDF document?

  No, it was published in an interactive PDF, has always been the case. It's another way to publish the video, that does not need to deploy it to an LMS or a Web server, you can send the PDF file. However, since Flash player is is more integrated in later versions of the Adobe Reader software, the user is to install it.

• How can I export as single STROKE trace the path?

  All my features (even on the smallest setting), out of the full paths when open in Illustrator.  Is there a way to export the paths as single striped?

  Lol draw create filled shapes, not outlines. It is similar to drawing with the BLOB brush in Illustrator.

• How to load the PDF (HTML Loader) with the reference of the file (dialog box) [AIR]?

  Hello.  I try to get my AIR application to load a PDF document from the dialog box using the file reference class.

  With the code that I have if I use an ordinary charger so I can get a PNG image to be loaded into a container and display on the screen.  But PDF requires HTML Loader that seems not to accept event.target.data because he expects a string.

  This is the error I got

  TypeError: Error #1034: Type coercion failed: cannot convert ["'FileReference object] in flash.net.URLRequest.

  at test_pdf_load_from_dialogfla_fla::MainTimeline/loadFile() [test_pdf_load_from_dialogfla_fl a.MainTimeline::frame1:61]

  Test_pdf_load_from_dialogfla.swf [UnloadSWF]

  Here is my code:

  import flash.net.URLRequest;

  import flash.display.MovieClip;

  import flash.html.HTMLLoader;

  import flash.net.FileReference;

  import flash.net.FileFilter;

  var file:FileReference=new FileReference();

  var container: MovieClip = new MovieClip();

  addChild (container);

  var i: Number = 1;

  the button is an object on the stage, will not be called via actionscript

  button.addEventListener (MouseEvent.CLICK, showDialog);

  var myFile:FileReference;

  var myFileLoader:HTMLLoader;

  function showDialog(e:MouseEvent):void {}

  myFile = new FileReference();

  var PDFFileType:FileFilter = new FileFilter ("PDF Documents (*.pdf) ',"*.pdf"");

  myFile.browse ([PDFFileType]);

  myFile.addEventListener (Event.SELECT, selectFile);

  }

  function selectFile(e:Event):void {}

  myFile.addEventListener (Event.COMPLETE, loadFile);

  myFile.load ();

  }

  myFileLoader = new HTMLLoader();

  function loadFile(e:Event):void {}

  myFileLoader.load ((e.target) m:System.NET.SocketAddress.ToString ());

  }

  (with the new selection of forum I also can't seem to put this topic in the location of the ActionScript of Flash Pro forum.)

  Success!

  I was thinking about this subject for several hours, when I thought that "maybe the statement in the function loadFile e.target may contain the"name"property.

  When I used a trace statement to test this, my thoughts have revealed that, to be precise.  The appeal of e.target.name fills indeed console output with the correct file name.

  To be sure that I did the following:

  myFileLoader.load (new URLRequest (String (e.target.name)));

  myFileLoader.width width = [[set to something other that the default value of 0 to show the PDF of the HTMLLoader content]]

  myFileLoader.height = [[ditto of the previous line, the default value is 0, which would make the invisible PDF content]].

  I'm so happy to have had this inspiration and also to the fact that the ActionScript documentation I found has good examples to follow.

• Larger file Media Encoder CC 2014 exports Media Encoder CC with the same settings

  We would like to offer final exports to most of our customers with the following parameters:

  Format: Quicktime

  Codec: H.264

  Quality: 100

  1920 x 1080, 23.976, progressive, square pixels

  make maximum use

  Audio: uncompressed, 48 kHz, stereo, 16-bit, single track

  When I used to export video for ~ 5 minutes using these parameters with the first or Media Encoder CC (7.2.2.29), I would get a file ~ 1 GB. If I export a video of 5 minutes using these parameters in the first or Media Encoder CC 2014 (8.0.1.48), the result is ~ 4 GB.

  Any ideas on what this could be? I guess it's a user error, but I can't nail down what it is.

  Thanks for your help!

  OK, so it was a problem with the user. On the model that I had created in the former CP, the flow was limited to 10 Mbps, and I does not have a limit in the 2014 version. I don't take this in my original test because I ran on another computer I normally use.

• I want to print or export (PDF) a design with an indication of pantone colors used without separations so that our customers can see them (not in CMYK)

  Before I used illustrator CS, I was able to point used on a print or PDF with coreldraw pantone colors.

  Can someone tell me how to make such an impression with CS6.

  My customers saw no Pantone colors used in the design (not in CMYK)

  Add your tones to your Swatches Panel (window > Swatch Library > color books > Pantone + solid coating >)

  In the menu drop-down of the swatches Panel, select all unused nuances and delete it. Also remove all unused swatch groups.

  File > Configuration of Document > do the purge. 5 ".

  Use the text tool to indicate the spot colors on the outer edge of the background area lost, do the color type matches the specified color spot.

  Save as PDF. This PDF file printed with purge will show the spot. Alternatively, you can select 'Add crop marks and color bar' in the print settings, which should also indicate the tones.

  In InDesign, you can add a box to your page slug, where tones usually added.

• How to export my single page site in Muse as a newsletter?

  Hello

  Is there a way in Muse I can export a page unique site to make it compatible or convert for display in Microsoft Outlook?

  I designed a newsletter in Muse, he exported and delivered to our it guy. He told me that he cannot use these files. Any help?

  Link design (template):

  http://e-zinemanagermagazines.BusinessCatalyst.com/index.html

  Thanks in advance,

  Johny

  Short answer is you can't.

  1: should be set the Viewer to have their email in HTML format. A large number of people do not have this option and be able to read plain text versions.

  2: display of a Muse page requires a browser. E-mail programs even if within a browser itself have not web browsers. So all the tags div and CSS that is created with the Muse does not work in email because the e-mail programs do not support.

  3: you must re-create the Muse page using only the HTML, inline styles and tables for layout. Keep in mind that even a lot of people will see may not drop it even then unless you have a version of plain text back so.

  It would be easy enough to recreate something very close to that with just HTML and tables. Just can't use Muse to her.

• replace a single quote with the double quotes with the function replace

  I work with one apex page, which contains a text as a filter box. If I put a single quote and find then I get the error message saying that parse error.
  
  For this, I want to replace one single quotation mark with double quotes, so this should be perfect. and apex should show the result.
  
  A allow the query to the same which will replace the single quote with double quotes.
  
  Published by: Santhosh Kumar T 15 Sep 2008 05:13

  If it was confusing... Try the less confusion (according to you)! ...

  Select Replace ("ab" | ") "|' it," ',' "') twice;"