export the disproportionate video
When I export the video not mater what that s setingage out low quality evenhough and disprportional in the preview window looks a lot. the film is 720 x 480 size 29 is 319 MB
Your sequence settings must be the same as your footage is 720 x 480.
The screendump illustrates a sequence of 1920 x 1080 setting
That's why your image looks too small.
Export settings is ok.
If you can not choose a correct sequence parameter do this, it will create a proper sequence.
Tags: Premiere
Similar Questions
-
Export the same video optimization
Hello
I have been using Premier Pro for a small video project and I'm really happy with the software. The only problem I had was that every time when I export the video (with the same format of video/audio) for even the "small changes" (like changing a word in a tag), takes about 20-30 min (ASUS X550ln).
Given that all other parts of the video are unchanged, is it possible to keep the cache (optionally) since the last export in order to reduce the time for export again (when the audio/video format is the same)?
Thank you
What you are looking for is called smart rendering but that is available for some formats.
Smart Rendering in Premiere Pro CS6 (6.0.1 and later), & first Pro CC
-
CC high-end Pro. Brand and tag, but the video won't export. Read it, its only part of it.
Your shot, "paillasse" chosen as material export, * not * "sequences outside." Change it in the menu drop-down (lower-right, center-ish) and you should be good
-
I am running 10.1.1 version. Is it possible to export the video at 30 frames per second instead of 60 frames per second?
Yes. The frame rate (and resolution) of a project is determined by the first clip set a new timeline for the project. So put a clip known 30 fps (with the resolution you want) in a new project timeline then copy everything from your existing project in the new project. You can then remove the first clip if you wish.
Geoff.
-
Should the compressor for FCP export 4 K videos?
Help please!
I have Final Cut Pro X 10.2.3 on iMac. From now to the title of the ACTION there is no option to export 4 K video. It will allow me to export 4 K video if I purchase this compressor and install it?
Thank you.
No, you don't need compressor for 4K. If your Final Cut project is set to 4K, you will have 4K of export options - unless you choose something like DVD.
Russ
-
Not possible to export the videos of the Camileo S20
Hello everyone
I have a toshiba camileo S20 user and face problems to export my recorded videos.
one of my friends who is also a s20 user told me that I just need to drag and drop any content once I select "view files" when I connect my cam.
However the videos once slipped and dropped cannot be looked at. the sound that is not present or the image.
has someone of another fact in the face of such problems? What should I do to see my recorded videos?
do I need to use one of the programs in the package?Thanks in advance
OlinaHello
AFAIK the Camileo support SD card and the SD card can be removed.
So why you n t just copy the files from the SD card to the computer HARD drive?It's the easiest way to export files from camcorder
-
I can't export the videos to iMovie on my iPhone
Product name: iPhone 6 s and the latest version of iMovie
Storage capacity: 128 MB
I created a trailer and wish to export to a video clip. However, export any channel I chose, the export would suddenly suspend. Then an error message appears on the screen.
Thank you!
I doubt I have a solution for you, but you must at least share the text of the error message in case it means something to someone else. It can help to close all applications and restart the device before attempting to export. If you can export to iTunes, you should be able to copy the project using the file share space on the page applications on your device when it is connected to iTunes.
TT2
-
No sound when you export the missing project like HD (AAC codec) video
Hi there everyone!
I am facing a problem when you try to export a finished project to iMovie as a HD video, no sound!
Here's the scenario:
MacBook Pro (mid 2010), OS X El Capitan free 10.11.2, around 90 GB of space on the hard disk, iMovie ' 09 (Version8.0.6)
The project is finished in iMovie, ready for publication in HD, when I saw it there, no problem with the sound. However, as soon as I try to export and select HD output quality, the .mov file will open without playing a sound in Quicktime format. If I select "large" inferior quality, it gives me a sound .m4v file. Even when I select "export with quicktime" and manually select the audio options (AAC 256 Kbps) the final version will have all the sounds.
A few months ago, I've been working on another project, it also exported in HD. When I check the first export view of the current project file information, it will say "Codec: H.264, AAC" size «1280 x 720, "when I export the current missing AAC while having the same dimensions.»
I'm really not an expert on these matters, but I tried to look for some option in iMovie, no luck. Maybe someone had a similar problem or knows why it does not work. I would appreciate help.
Thanks in advance!
I was FINALLY able to get 1080 p with its new output using the following parameters:
I also HAD to define the file manually to .m4v extension before hitting SAVE as iMovie he left .mov (and it has not yet worked the first time he encoding with the .mov file extension).
I don't know what the latest update messed up in iMovie, but I've NEVER had a problem before the video release. I hope that they get it fixed!
-
Photos app freezes when I try to export photos or videos. When I try a copy/paste or do drag function only a photo thumbnail is generated on the destination. Is there a solution?
Welcome to the Apple community.
Try to repair the library holding down ⌥ ⌘ at the launch of the app.
-
Help ~! Adobe Premiere Pro exports the poor quality video...
I'm testing in order for use to YouTube videos of Adobe Premiere. No matter what I do, the problem I have, it is the quality of the exported video, doing not well and it's frustrating... = me '(je voudrais que quelqu'un qui sait ce qui pourrait se passer à me dépanner ici!)
Therefore, the screen that I was working. This character, I drew... I'm trying to use it in the clip. The left is the original, right, how he showed first upward instead (a little too zoomed in). Accordingly, I decided to reposition him and him a bit fits back in effect... not too bad so far.
So as I said, this was just a test clip so I tried even second-clip. This export press, I made the following adjustments:
No. correspond to the parameters of the sequenceFormat: H.264
Screening: YouTube HD 1080 p 23.976Yes , export the video and export audio
No Gaussian blur
Width 1 920
Height 1 080
Frame rate: 23.976
Order on the ground: progressiveAppearance: Square Pixels (1.0)
TV standard: NTSC
Profile: highLevel: 4.0
No. made to maximum depthEncoding Bitrate: VBR, 2 pass
Target Bitrate: 15
Maximum flow: 25
Yes distance keyframe: 72No Maximum render quality
N use found
No. interpolationWith that, I queue it and export it to my office, no other changes. After I saw this however... it is really blurry. It seemed to me that if the video demoted to 240 p.
I would like to help with this, I would like to make my videos much more crisp and sharper than that... the image itself has been designed around 500 x 800 pixels, so there should not be a problem with the picture itself (I think)...
Help meh!
-SupyWell, we found the problem! You start with an image of HD quality, stuffing in a sequence to only 720 x 480 DV, losing more quality... and then export the image shrunk down is actually jumping again HD.
If you intend to export at 1080 p, then sequence settings must also be 1080 p. Think of a sequence like a picture frame. If you have a photo 8 x 10, you need, for example, a frame 8 x 10, not a 4 x 6.
Please use file > New > sequence, then AVCHD 1080 p > and then decide what rate to deliver, 30 or 24, and then choose a preset suitable to work with. What frame rate you select, and then use the same for export (in reality, it is rate of 29.97 or 23.976, rounded names for simplicity).
Thank you
-
How to export a short video clip to the timeline of EP 13 on my HDD to be used elsewhere?
I would like to copy and export a short video clip from a video on the timeline of the elements first 13 full length so that I can use it in a different video. Any advice would be appreciated.
Brian Sweeney
"Work area bars" are circled. Him are normally stationed at the beginning and at the end of the timeline. Drag them there where you want, and then check out.
Largarath codec is not included in the pre, it is heavy, and you have to install it yourself. Treatment of H.264 is usually more than "good enough" unless you have pictures very critical.
-
What is the best export the configuration when you want to place your video on Facebook or youtube
What is the best export the configuration when you want to place your video on Facebook or youtube
Hi Robert,.
Here are the high quality requirements of Facebook: How can I ensure my videos are of high quality. Facebook Help Center | Facebook
Formats: this video file formats can I upload? Facebook Help Center | Facebook
YouTube: recommended encoding download - YouTube Help Center settings
Thank you
Kevin
-
I want to convert my video files in FLV format as im eager to export the video in flash, this seems to be the only format that it will accept. Media Encoder is more to this format, how can I get around this?
I could be wrong, but in my research for this issue, I learned that there is no solution from Adobe to convert an F4V or a FLV. I talked to Adobe support directly and they told me to buy a 3rd party conversion program. I find absolutely stupid that the only way to embed a video in Animate using a FLV or F4V, and there is no codec to convert video in this format.
-
export the video with alpha channel
Hello
I am brand new with Pro CC first. I completed a sequence where V1 has a series of still images, of small size, so I can see the video clip on the V2 in the background.
I already exported only and it works very well.
I would now like to export the clip on V1 by single with alpha channel so that I could put a different background in a new sequence.
Read and followed the instructions as described in the forum, but they must use something different than what I use (first Pro CC on a laptop with windows 7 Professional), because I do not see the indicated settings.
Once the clip is exported with an Alpha channel, I'll bring Premier Pro and everything just change the background several times so I will gradually in with several different sequences.
How could I accomplish this export with an Alpha channel?
Thanks for the info.
Bert
Hi Bert,.
I think you have your tracks reversed, the stills would be on background on V1 and V2. Of course, if a SINGLE export with alpha and no background, then you can simply use V1 (but later, we clip you made must be V2 or higher to insert background on a bottom rail to show areas of the alpha channel). Export using QuickTime > GoPro 12-bit with Alpha codec.
Thank you
Jeff Pulera
Safe Harbor computers
-
Recreate a link to the mp4 video when exporting the apk from CC animate?
Hello, I have a problem with my video in a mini app that I have to do.
I joined a video with the video import box and all this beautiful work on the debug (with Tablet android usb connected) mode and the preview.
But when I publish on the APK, the video does not come with it, and the link is borken (I guess).
It's just a simple menu with a Buton "Video game" entering a period where I put the video with the FLVplayback thing (video is a mp4 encoded with the android 720 p preset).
I don't want any link flow online ect, I want just a local use.
Then, how to properly export the package?
If anyone can help...
It didn't occur to me before, but you've entered in the publishing settings, general tab and video added to the list of included files?
Maybe you are looking for
-
On a five year MAcPro, when you try to open a document, all stored documents seem to open at the same time and any attempt to close results in the MacPRo gel for a long period. Ideas for cause and ideas for a solution?
-
problem of sudden wifi with iphone 4S
Hello a few days ago, my iPhone 4S does not receive more an IP address from a DHCP server, even for all the WIFI networks, with that I use for work. WIFI authentication is OK, but is never received from IP (or other information received from the DHCP
-
I have a Wi - Fi connection and the signal is weak
-
Can switch 10, I do refresh of system or factory reset after the update of win10?
I have the Switch 10 with Win8.1 and think to update to Win10, but no can not find information about refresh/factory reset system after the update. I'll be able to factory reset the tablet to Win8.1 or once updated, all refresh/reset options have dis
-
Signing server down again?
Last night I tried to export my version of my application build, but it got stuck at the signing with an error saying "Error: server cannot process your request at this time, please try again later." So I went to bed. But now the morning again its gi