Export the sound problem

Similar Questions

• Export the CS3 problem

  I have a little problem with the export of hardware H.264. MP4 output. 2 Pass video bitrate. While 720 p resolution. and I get something like this: http://www.youtube.com/watch?v=amvrnT1zFthecan someone tell me what I am doing wrong? (I speak of formwork)

  PAL 25 fps, NTSC's 30 frames per second

  If your film is really PAL, you should use a setting of appropriate project

• Sound problem really very weird

  CS4

  I have a really weird problem. I need to adjust the sound levels for a clip, so I export the sound to Cubase. The original sound has been left only lane, so I export it in mono to get into 2 channels. In Cubase, I do all the necessary balancing etc., then export it in stereo. (If I play this exported version, it plays in stereo). Then I import into Premiere Pro, but now he plays on the left channel.  Why?

  I'm glad you added this edition because that probably reveals the root of your problem.  I think that there is something you do not correctly in Cubase to export it in stereo.  I have reproduced your problem using a different DAW that allows 1) stereo, 2) Mono Split and 3) Mono exports.  You can also duplicate a stereo file L only at a second way Exchange channel and then select two channels and bounce audio since the two tracks to a stereo file.  With the swap of the second track, you get a stereo file R only, but this bouncing with the stereo file only L will produce a stereo L - R file that matter properly in first CS5.0.  I hope you can understand where the fold is in your export of Cubase.

  Sincerely,

  -markerline

• How can I make the sound on my laptop cuts a stop?

  whenever I was listening to spotify, watch a video on youtube and online movies, the sound would be always stopped at halfway. I tried to use the sound problem

  Shot several times and check the sound properties and they always say that the speakers on my laptop work properly. my laptop from the fact

  for the last couple of days and it drives me crazy. Please give me some steps to resolve this problem before I resort to have a TI repair specialist

  It would be very useful for me. Thank you.

  Hello Lauren,

  1. What is the brand and model of the laptop?

  2. which version of the Windows operating system is installed on the computer?

  3. Since when are you facing the issue?

  4. what browser do you use?

  5. is specific to hear when you're online?

  6 did you a recent software or changes to the material on the computer?

  If you are using Windows 7, you can follow the steps from the link and check.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/is-is/Windows7/tips-for-fixing-common-sound-problems

  Hope this helps and provide us more information if you need more assistance.

• Why the sound is different when the project is exported?

  Hi all. It's me again. Because you are always so useful, I need your help with another problem. I just finished a wedding, publishing and towards the end of the ceremony, the sound is fine when you work in Final Cut, but when I export, the game becomes heavy and distorted. Any suggestions on why this is happening and what to do? I've never had this happen before. It is a client, and to do here tomorrow afternoon at the latest. Thanks for your help!

  We have seen that this several times here on the forum but it's never happened to me. I believe that the proposed solution was to remove the shape clip your scenario and replace it form the browser; Make sure that the audio in the browser reference file is good before do you. You can export a range of test history.

  You can also try to delete the files of the project.

  It may take a few hours more for fans to offer other suggestions.

• No sound when you export the missing project like HD (AAC codec) video

  Hi there everyone!

  I am facing a problem when you try to export a finished project to iMovie as a HD video, no sound!

  Here's the scenario:

  MacBook Pro (mid 2010), OS X El Capitan free 10.11.2, around 90 GB of space on the hard disk, iMovie ' 09 (Version8.0.6)

  The project is finished in iMovie, ready for publication in HD, when I saw it there, no problem with the sound. However, as soon as I try to export and select HD output quality, the .mov file will open without playing a sound in Quicktime format. If I select "large" inferior quality, it gives me a sound .m4v file. Even when I select "export with quicktime" and manually select the audio options (AAC 256 Kbps) the final version will have all the sounds.

  A few months ago, I've been working on another project, it also exported in HD. When I check the first export view of the current project file information, it will say "Codec: H.264, AAC" size «1280 x 720, "when I export the current missing AAC while having the same dimensions.»

  I'm really not an expert on these matters, but I tried to look for some option in iMovie, no luck. Maybe someone had a similar problem or knows why it does not work. I would appreciate help.

  Thanks in advance!

  I was FINALLY able to get 1080 p with its new output using the following parameters:

  

  I also HAD to define the file manually to .m4v extension before hitting SAVE as iMovie he left .mov (and it has not yet worked the first time he encoding with the .mov file extension).

  I don't know what the latest update messed up in iMovie, but I've NEVER had a problem before the video release.  I hope that they get it fixed!

• Problems with the UI Flash CC. Mainly, I can't click on some buttons and textboxes on different modal windows. (for example. Scale and rotate the sound properties.

  Hello

  I was wondering if anyone else has problems of this kind. I basically only to find a bunch of different buttons, fields and the tabs do not respond to my clicks. This seems to be spread throughout the application.

  I had to work around most of this by using the tab and arrow keys to navigate around the modal buttons and fields... but it's a bit of a pain.

  There are certain parts of the interface that are not accessible via the tabs and the arrow keys... for example tab ActionScript in the Sounds Properties window... There is no way to do that... and by clicking on the tab itself does nothing, although I can see that the rollover of the tab State is enabled.

  I ended up having to run Flash CS6 in order to define the classes of the export of audio files, and it's a major pain.

  Interface issues similar user exist with other things... for example, the color picker (eyedropper) seems to choose colors near, but not directly under him.

  I'll be honest... I'm running on Windows 7... Via boot camp on a Mac Book Pro with the retina display... so questions could come from this combination. However... Flash CS6 has these questions... so I can only think that it is a matter of Flash CC.

  I appreciate any input you can provide. (Although the obvious 'it on OSX rather run' or "just use CS6" are not the kind of responses I'm looking for.) I have my reasons for installation. )

  Thank you.

  Cheerfully,.

  -JR

  Mohan thanks!

  Scaling text to 100% actually works!

  After that I changed the scale to 125%, it still works (which was not planned)

• Poor quality of the sound in the timeline and export; very well in the Source?

  Hi all.

  Newbie-Pr but experienced pro audio digital. I am confused and I know I am missing just something somewhere.

  I made a video for one of my songs. The graphics are quite (in AE), imported Pr and everything what is superb. I import the final audio mix and it sounds very poor quality when played the chronology and the final output, regardless of the format (I tried several presets and custom as well settings). I played a bit and noticed that the audio sounds fine when played in the Source window inside the Prime Minister.

  The session of Pr is comrised of 18 video tracks (not all playing at the same time, of course) and a stereo audio track.

  I tried to re - export audio from logic to depths of different bits, sampling frequencies and formats of file (mp3, wav, AAC, etc.) but the results are the same each time: Source (Pr) sounds very good, logic output sounds very well made / reading of the timeline looks very bad quality mp3 and produces final sounds just as bad.

  I tried everything I can think of. I hope one of you can show me what I'm missing.

  TIA!

  Mark

  First Pro CC

  Processor 2 x 2.8 GHz Quad-Core Intel Xeon

  Memory 8 GB 800 MHz DDR2 FB-DIMM

  Graphics  ATI Radeon HD 2600 XT 256 MB

  Software  OS X 10.9.1 (B 13, 42)

  Thanks for the reply!

  I lived the same results, no matter what I used the export settings. In addition, the poor quality of the sound was present in the timeline itself, without even exporting the project.

  Finally, I lifted my hands, has launched a completely new project, the same audio file in drugs... sounded good. Copied / pasted the video clips in the project original, broken and boom, everything is fixed. Yes, corrupted file Pr, it turns out. All I had to do was start a new project and import all the old components.

  I had to do that in logic a lot (more and more these days). I wish just that I had tried 10 hours earlier! HA.

  Anyway, problem solved and many thanks!

• problem between loadmovie and the sound of the movie loaded

  Hi, I've done a swf that uses sound events and he plays very well. the sounds are dealed with its new, somesound.attachsound, somesound.start, somesound.stop and so on, the binding properties are something like "export for actionscript" and "export in first frame" checked. the movie plays ok when I look at with the swf player or in a web page. the problem is when I put a preloader in an external file, the main movie is mainly photos so it would remain as a blank screen when loading, so I had to do an external preloader, but when the film main plays commissioned by the preloader, sounds controlled via actionscript used to play, pointers or suggestions?
  TNX

  Flash is probably looking for the sounds related to the library of _level0.

  to remedy this, use what that = new Sound (this); instead of all that = new Sound() during instantiation of sound objects in your external swf file.

• 11 Firefox crashes and is lagging after a few minutes. YouTube videos are lag while the sound is normal. Can you help me solve this problem?

  If I restart my browser everthing works very well for at least 5 minutes. When I watch several videos to youtube, the LAG comes back and the video begins to freeze aboud every second for just a fraction of a second. The sound is stil played properly it only affects the graphics...
  After about 10 minutes watching videos, the whole browser gets lag. Sometimes when I type fonts appear only about a second later. Scrolling is also affected. A few minutes later everything is back to normal, but it' not always t like that?

  I don't know what to do, I already rebooted with disabled modules, but I did not notice any difference. My ati graphics card drivers are up to date and I have the problem with firefox, chrome works perfectly.

  Best regards, Jan

  The offset is now gone. Removal and reinstallation of the plugins and the deactivation of my modules to speed dial (which is sad cause I like them) fixed. I think that's their function to auto-update the previews leading the video shift.
  Thank you very much for your quick response and your help. I appreciate it.

• EliteBook 8570w: the sound quality after update problem

  I connected the laptop to a docking station. The docking station has a connection to a headset/external amplifier. Ideal to connect the amplifier. Only in this respect has more no bass. The connection of the helmet of the computer laptop itself has a pleasant sound, but I do not like to keep card 10 x a day between headset and amp switching. (Phone + Amp = echo). My alarm only works with external stakeholders, but Skype and Softphone want the headset.

  Also, I turn off HP speakers in the system and have no more just the external headphones, since one of the most recent updates the internal speakers don't turn off when the headset is connected. This has implications for readers audio and video players, as they want their sounds through HP speakers. Only VLC mediaplayer has the possibility to move from one sound channel, but I have to change every time I start a video.

  Before the update, there was an automatic switch and I could let two of them on and the sound channel chose autamtically and turn to the helmet that was plugged, etc..

  I use Windows 7 64-bit and windows 10 is not an option due to various programs more alumni who should be updated (if it is still possible), which would be very expensive.

  I noticed something new has been installed called SRS Premium Sound Pro. Maybe it's the culprit. I dare not change anything in it.

  Does anyone know how to debug this?

  Hello

  Could update you the

  Driver Audio of IDT high definition (HD)

  Type:	-Audio driver
  Version:	6.10.6435.0; 5.10.6435.0(5 février 2013)
  System:	Microsoft Windows 7 Enterprise (64-bit) | See all
  Name of the file:	sp60317.exe (42 MB)

  Link: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5257503 & swItemId = ob_115135_1 & swEnvOid = 4060 #tab1

  Also, I suggest you to disable all the improvements in the properties of speakers and check out. See the steps below:

  1. Press on the key Windows + X.
  2. Click on Control Panel.
  3. Double-click the sound icon and click on speakers.
  4. Click on Properties.
  5. Click the enhancements tab.
  6. Now, click on "disable all sound effects.
  7. Click OK , and then check if the problem persists.

  If the problem still exists, as a solution, I suggest you uninstall and reinstall the sound drivers in compatibility mode and check if it works for you,. Refer to the steps below:

  Follow the steps to uninstall the audio driver:

  1. Press the Windows key + X key , and then click Device Manager.
  2. Expand 'Audio Video and Game Controllers'.
  3. Right-click on the audio device listed and click on 'Uninstall'.
  4. Select the option to remove the software driver.
  5. Restart the computer after its uninstalled.

  Now download the drivers from the manufacturer's Web site and install it in Windows 8.1 compatibility mode. Follow the steps below to install the drivers in compatibility mode:

  1. Right click on the driver configuration file and click on 'Properties'.
  2. Click on the "compatibility" tab and check the box ' run this program in compatibility mode for "and select operating system Windows 8.1 since the menu drop-down."
  3. Click 'Apply' and click on 'OK' and run the file to install it.

  Hope this helps you...

  Click on Bravo and accept as a Solution if my answer was helpful and answered your question.

  I am an employee of HP!

• -What sound effects and themes in iMovie legal to use on a youtube video without the copyright problem.

  -What sound effects and themes in iMovie legal to use on a youtube video without the copyright problem.

  Yes.

  Geoff.

• Satellite L30: Watch DVD problem - slowly and the sound is distorted

  Hello!
  I have a Toshiba laptop Satellite L30-115. I use WinDVD preinstalled to watch DVD. everything was fine until yesterday. Since then, my DVD drive seems to have problems with playback of DVD movies (original).

  It's a little slower that should be, and the sound is a bit distorted. The same DVD my laptop no problems to play now, it seems impossible to play properly.

  I tried system recovery to date, everything was good, but that did not help.

  Everything's fine, when I play movies from my hard drive, but apparently my DVD Player cannot play fair.
  I tried various combinations (turn on/off digital playback in Device Manager), but nothing seems to work.

  No idea how to fix?

  First of all, give it a try with cleaning the lens of your DVD player. Several times a lens dirty or CD/DVD that makes impossible to correct read causing delays.
  Because the movies read from the HARD disk correctly, it does not seem to be a related problem of codec, but... you should still try to use other DVD player software to ensure that WinDVD is not the source.

  I suggest you also to keep longer, to install software of reduction of CD speed during normal use of all the days of the life of your drive. As you know, the disc spins a lot faster than actually required inside the car which complicates the procedure for reading (especially on the scratched CD) and consumes more energy, too.

  Reduce speed solves problems like the one you have several times. Here is a link to the Version of acoustic silencer of TOSHIBA 1.00.008 (from page of the pilot satellite L30), give it a try:

  http://support.toshiba-tro.de/tools/satellite/sl30psl33/XP/acoustic-silencer/acsil-PSL33-XP-100008-en.zip
  (This software runs independent you have European/American version of laptop L30, even on a different model as Satellite Pro 6100 a.s.o..)

  Kind regards
  chain

• Sound problems and the modem EA60-155

  3 weeks ago I received my laptop EA60-155 and have experienced ongoing problems with the sound and modem on the laptop. I bought the laptop from currys so am sure that they are an authorized dealer.

  The problem is different, sometimes I turn on the laptop to find out, there is no sond and the modem does not work, sometimes the sound works and makes the modem for about 15 minutes before the problem arises again. I bought the machine to the dealer authorized to Bahrain twice now, twice they said them that the problem was resolved when he doesn't. I called the center of appeal twice, but I still have the problem. Any advice would be greatly appretiated.

  Hello

  If you have this problem permanently, you can try to reinstall the modem and sound card. If the unit is pre-installed with recovery DVDs, it should work fine. As a first step, you can try and remove the sound card and the modem from Device Manager, then restart the device. The two hardware components must be recognized and installed again.

  If there is no success I recommend you backup your data and reinstall the OS using recovery DVDs. On this way the unit will be clean installed and there should not be any problem. Every problem that happens after that can be some hardware malfunction and you must contact the Service partner again.

  Good luck!

• NB550: After the Bios Update: sound problem

  Hello

  I updated my bios a few days ago and I have a problem with my sound.
  Immediately after the update the sound does not work at all: No Sound is detected.
  If I had a glance in the Device Manager, I found 2 entries that were called: "unknown device".
  I chose the point on both inputs, the updates succeeded and my card "Realtek HD Audio sound" is now displayed in 'sounds and Audio devices '.
  The sound worked after that.

  But the sound is still stuttering now. Maybe a few seconds the sound is good enough, then he breaks for a split second and turns on again. It wasn't like that before the update. Also if the computer has to calculate, for example if I use internet, it is still more stuttering.

  Should I try to set my bios default settings (even though I was never in the bios before)?
  Other solutions?

  Please help me with this...

  Thank you very much in advance!

  > But the sound is still stuttering now. Maybe a few seconds the sound is good enough, then he breaks for a split second and turns on again. It wasn't like that before the update. Also if the computer has to calculate, for example if I use internet, it is still more stuttering.

  These sound like some background process would use a lot of CPU performance and as a result some delays could appear in audio playback.

  In your case I check the process in the Task Manager tab and check which process locks the CPU.
  Then, you can google for it this process in order to get more details about that maybe it could be disabled...