Export values quick dashboard to Excel with reports

Similar Questions

• Complete export dashboard in excel gives error generate document in the table view of subtotals

  Hi all

  We have dashboard with several tabs and you try to export the whole dashboard in excel.

  Excel file is generated with all tabs on the dashboard as the leaves, but few of these leaves are empty with error message of document generation in the first cell.

  After further analysis, we concluded that the cause is seen with subtotals on table. PivotTables with subtotals are generated correctly.

  Workaround obvious to re-create the table views in the articulation points is not possible due to a large number of reports.

  We run Oracle Business Intelligence Product Version 11.1.1.7.150120 (Build 150113.1200 64-bit)

  Any ideas or solutions to this problem would be appreciated.

  Thank you;

  Klaudio

  We just found guilty

  Lines per page to display in the table must be 999999999 max which is more than enough for our needs.

• Measure the silences (export values for the markers to Excel)

  Hello!

  I have the following task: I have wav files containing words listed by people. I need to measure latency between these vocalizations and export values in Excel.

  I found a function of marking of phrases (Edition-> Auto-Mark). But there are 2 problems:

  (1) I'll measure not gourmet, but latencies between them. There is a solution with subtraction of the time of the beginning of the next word at the end of the previous, but it's not very practical.

  (2) in any case, I don't know how to copy these values I get when phrases daub. There is no possibility to copy them in the window of markers (see the attached screenshot), or export them in any case.

  Help me, please! Thank you in advance.

  Luckily for you, this has been a problem in the past - and bored one individual to create CueListTool, which is perfectly able to export the list of markers in Excel. Should be all you need; You can sort the silence of the noise outside the hearing quite easily with this, I think.

• By passing the quick values of dashboard as input for a function

  Hello world
  
  I would like to pass quick values of dashboard as parameters in a function as described below, but I'm a little hesitant how to proceed.
  
  In the physical layer, I defined a table in a select statement - something like:
  
  Select a, b, c
  table (minutevals.get_minute_vals (para1, para2, para3)
  
  minutevals is a stored procedure
  get_minute_vals is the stored inside on a function procedure
  Para1... para3 are input to the function parameters.
  
  Right now (for testing) para values are hardcoded.
  
  How can I pass values to a quick dashboard in the para1, para2 or para 3?
  Is it possible to define (editable by the user) session variables to receive the quick selection of dashboard
  and then use these session variables as the para1... para 3 values?
  If so - how can I do for session variables in the function parameters (use to evaluate?)?
  
  Thanks for your help
  
  concerning
  Andy

  See this link which will be useful

  Variable passage of presentation to the physical layer in SPR

  Thank you
  Vino

• How to share quick values between dashboards?

  Hi all
  
  I have two dashboard pages. On the first page of dashboard, I have a few guests, say the year and month and a guided navigation link.
  When a user selects a value among the guests and click on the guided navigation link, you will see the dashboard page.
  
  But the values that the user has selected go to the dashboard.
  
  Lets say the user has selected in 2009 as the year and week - 10, like the week and refined of the query, and click on the guided navigation link.
  All of these values must be informed about the guests that do not exist on the dashboard that opens when you click on this link.
  
  Is there a way to do this!
  Any immediate response would be appreciated!
  
  Thank you!!
  Vasantha.P

  The prompt value guided navigation link of dashboard is not parsed. You probably use guests of different dashboard on every dashboard page and they are defined at the level of the page. Try to use the same prompt of dashboard in two pages of dashboard and dashboard upgrade.

  Another option (if you want to use the dashboard of the prompts) uses DASHBOARD URL in the report to analyse the variable of the presentation of the guest of dashboard source target guest of dashboard on the dashboard of the target page, see this blog entry for details:
  http://108obiee.blogspot.com/search/label/dashboard%20URL

  Concerning
  Goran
  http://108obiee.blogspot.com

• Error 7 with Report Generation Toolkit

  Hi all

  I am trying to generate an Excel sheet report for some readings using the "Generation of reports toolkit", but when you try to generate the report, the code generation report part is executed and gives Error (7) and there is no report is generated.

  The Code I use is attached in the following link:

  https://www.dropbox.com/s/9n4brimucsd0xts/report%20Generation.rar

  Can I get help please?

  Thanks in advance

  I could download and open your compressed file.  I unpacked it in a folder.

  There are many features that lead me to ask "you try to learn LabVIEW on your own, without a mentor and training and orientation?  Here are some of the things that I noticed:

  • Although a generation of .lvproj, .aliases and .lvlps project, open file reports, was empty!  Because projects have been added for LabVIEW, almost all development should be done in a project, but you don't seem to do.
  • You have an event loop (good) to manage the keys Start, Stop and report.  But instead of using Boolean control with a property and using an event "Changed value" latch, you use switch to published (which, so far, I've never used) and a mouse down event.  I guess this could work, but I've never seen this model.
  • You write an Excel report, but do not use the Excel-specific screws (for example Excel easy table).  Why or why not?  The basic idea of an Excel report, is that you create 2D text data, you want to write in Excel, then with a few simple screws, you open Excel, write the Table, and then save the report.  In particular, you do not write something that resembles the columns and rows on a worksheet (Date, time, Test, etc.).

  Now to your specific questions, error 7.  Do you know what means this error?  If you click Help, choose error explain, and set 7, you will see that it means "file not found".  Well, there is a place prominent where a file is used, just at the start of your program.  I recommend that you put a probe (do you know probes?) or an indicator on the way past in the hand for a loop and see what file you are trying to open (hint - there is an error in the way you build the path, but you should be able to understand how to fix it).

  Good luck.  Hope these suggestions you get on a better path.

• How to use the prompt value in the column of the report

  Hello
  
  I have a quick report column which is 'Adj Type' that contains values 10,20,30, and when the user selects Adj Type = 10, this value should be passed on to the column of the report.
  
  For example. Value in column 1 is 10 and this should multiple with the prompt value and production is expected to be 10 * 10.
  
  Ideas how to capture the prompt values in the column of the report for the calculation.

  Hi hsekar,

  (1) declare a presentation online in the section variable set Variable--> Variable--> P_var presentation

  (2) in Fx Table_name. Your_column * @{P_Var}

  @{P_var} {20} (20 is the default, it replaces when a user selects the value in the command prompt

  Thank you
  Saichand.v

• Export the result to an Excel file

  I use the attached script to export the inventory then as excel file. I used LucDtechnical of this post to store information in a CSV temp and later, save them to a XLS file. I need to perform a certain formatting in the report, as to change the size of the font of the header, adding some background colors.

  Do not the formatting as I am exporting to a CSV file. Is there another way to achieve the formatting?

  You can take a look at my post Export-Xlsx, the suite and ordered data .

• How to dynamically change the value of a column in a report

  Hi, I'm new to APEX and I have a small requirement. I have a report in a page which I query. Report will always have only one record. I need to change a value of a column in this report of the value received from another page. I was able to send the value of another page on my page of reports to a hidden page element, but I don't know how I can configure this value received to this column in the report. Is this possible? If Yes, can anyone help with this?

  970829 wrote:

  Please update your forum profile with a real handle instead of '970829 '.

  Hi, I'm new to APEX and I have a small requirement. I have a report in a page which I query. Report will always have only one record. I need to change a value of a column in this report of the value received from another page. I was able to send the value of another page on my page of reports to a hidden page element, but I don't know how I can configure this value received to this column in the report. Is this possible? If Yes, can anyone help with this?

  Not really clear exactly what it is you are trying to reach. You want to replace the value of a column in the report with the value of a page element? If so, simply replace the column in the report with a reference to the required page elementquery:

  select
     empno
  , ename
  , job
  , :p2_sal sal -- Replace value of sal column with value of P2_SAL item
  from
     emp
  

• How to make a form with report and a form of inclusion in the same page?

  Hey, guys:
  
  I was wondering if you could have any link or examples to show how to make a form with report and a form of inclusion in the same page, these two forms are related to the same table. Our customer wants that a user can add a new row to the table in a form and see all lines created by this user in a report, the report should provide link change as well. the problem is: whenever I inserted a new line or change a line or delete a line, and submitted and return to this page, all hidden elements lost their values, this report is empty, and some display only items also lost their values. Could someone give me any suggestions?
  
  Thank you very much!
  
  Sam

  So, the problem is essentially with page elements lose their session state values when re-loading of the page. How do you define values for the elements of the hidden page? You have default values defined for those? They are based on the database column? What is the "Source" parameter for these items on the page? It is set to "Always, replace any value in session state"? You have any process of 'Empty the Cache', which is reset these values to null element?

  What is your version of the Apex?

  I would recommend that you have installed for example in apex.oracle.com. This would help to better understand the issue.

  Published by: jaouad khalifi on 13 December 2012 22:11

• Train with report and create processes button

  In my form, I have an element that contains a single select statement to concatenate the elements entered by the user (: P3_ECRNO) with a chain of path of file to create a full path. The report is set up so that the user can open this link in a column. Everything works except the user must visit the form twice to get the link to complete the report.
  
  I hope that you will understand:
  
  I have a form on a Table with report
  
  P3 LINK_
  Source element is the SQL query

  SELECT 'file://departments/Documents/ECR%20Folder/' || :P3_ECRNO || '.doc' 
    from DOC_INFO 
        WHERE DOC_INFO_ID = :P3_DOC_INFO_ID AND :P3_ECRNO IS NOT NULL

  After the rest of the elements on the page are populated, the user presses the create button and dump everything in the report.
  
  In the report column as we speak is implemented to hyperlink to this folder and file (that was created previously).
  
  The first time the user presses the creation (or apply just for test, all except the full link immersed in the report. But when the form is reopened and Apply is hit, the link gets poured into the report and the works.
  
  I bet it has something to do with the processing time that often seems to have a problem with.
  
  Thanks in advance...

  Create a calculation "After Submit/SQL Query" to set the value of '_P3_LINK_ '. For a calculation query, you can use the same SQL that you used for the source of the element.

  CITY

• The text element values value when the user clicks a report line.

  The text element values value when the user clicks a report line.
  
  I have a report based on the EMP table and two elements P911_EMPNO, P911_DEPTNO. When I click on one of the lines the EMPNO and DEPTNO is copied to the text elements.
  It works fine if I leave the EMPNO and DEPTNO as SHOW report, but if I then these clear values are not retrieved the report form (my javascript is very limited).
  
  I need a method to retrieve the data hidden in the report and display in the text without the reposting of the page elements.
  
  Also, would be nice if the line was highlighted until another line is clicked but especially is my priority.
  
  Elements
  P911_EMPNO, P911_DEPTNO (field of disabled text, saves the State)
  
  Report
  Select * from emp using the model of report below.
  
  Custom model.
  standard_report_cust_P330-a copy of the standard report with a change model.
  BEFORE EACH LINE
  < tr onclick = "selectRow (this);" #HIGHLIGHT_ROW # >
  
  
  * Javascript in the Page Header.*
  < script language = "JavaScript1.1" type = "text/javascript" >
  function selectRow (p_tr)
  {
  var l_deptno = p_tr.childNodes [8] .innerHTML;
  var l_empno = p_tr.childNodes [1] .innerHTML;
  html_GetElement ('P911_DEPTNO'). Value = l_deptno;
  html_GetElement ('P911_EMPNO'). Value = l_empno;
  }
  < /script >
  
  If anyone has any ideas. Thanks, Pete

  Hello

  When you use this type of report model, you actually control on where the column values are used - and they can be used several times.

  For example, a setting of 'Model line 1' for one such model could be:

  <tr>
  <td class="c1">#1#</td>
  <td class="c2">#2#</td>
  <td class="c2">#3#</td>
  <td class="c2">#4#</td>
  <td class="c3">#5#</td>
  </tr>
  

  #1 # fact refers to the data in the first column, #2 # for the second and so on. So you can do:

  <tr onclick="javascript:dosomething('#1#','#2#');">
  <td class="c1">#1#</td>
  <td class="c2">#2#</td>
  <td class="c2">#3#</td>
  <td class="c3">#5#</td>
  </tr>
  

  For example, by clicking on the line would trigger the dosomething() function and pass in that the values of the first and second columns. Also note that the 4 # does not appear now - this column is 'hidden' (but note that you must check the box to show the column)

  Andy

• How the parameter values can be passed to OBIEE reports of the user interface

  Hello
  
  Does anyone have an idea on how to pass parameters to the UI (user interface of a java application) to
  OBIEE report page. Based on the value of the parameter passed, the report page should be displayed for ex: the product
  name must be selected in the user interface, then the page of the report must show sales for this product
  Alone.can u please let me know how this can be achieved. Any help would be appreciated.
  
  Thank you
  Leela

  Hi Leela,
  What you're looking for can be accomplished with GO URL, see here:
  http://download.Oracle.com/docs/CD/E12096_01/books/AnyWebAdm/AnyWebAdm_APIWebIntegrate6.html#wp1005251

  Kind regards
  Alastair

  Published by: AlastairB_UK on October 26, 2009 15:27

• Interaction of value to navigate through the different report.

  Hi friends...
  On my dashboard, I want to use interaction value to navigate to the different report. But I need the value at which the user clicks on the dashboard to filter the next report.
  
  for example. My dashboard looks like this.
  
  Region of... Total
  A........... 120
  B............ 200
  C........... 300
  
  When I click on A linked report must contain only A region.
  I have not any hirarchy put in place in the RPD.
  
  Thanks in advance

  Change column properties and value Interaction Navigate.
  In the linked report, add columns filters and assign "is invited".

  Kind regards
  Stijn

• How can I send façade to Excel with extension xlsx?

  Hello

  How can I send façade to Excel with extension xlsx (for Excel 2007)?

  This is my file as an attachment"and the extension of excel sheet is" C:\Documents and Settings\tr1388\My Documents\New Folder\Book1.xlsx ".

  Hey King Rio,.

  See below for an example of how you might go about inserting a picture of your façade in an Excel document. You can do a little more of your image formatting, as this example simply updates the image of the façade in the upper left corner of the first workbook in your Excel document.