Export VM organized all information

Similar Questions

• How to export data from user information in ACS 5.5?

  Hi all

  You can see the photo, how to export data from user information in ACS 5.5? Thank you!

  Sincerely yours

  Hello

  Yes you are right.

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• If my phone was stolen while it was unlocked, would get a remote delete all information from my phone so the assailant was actively digging through my phone?

  If my phone was stolen while it was unlocked, would get a remote delete all information from my phone so the assailant was actively digging through my phone? I'm afraid that the author would look through all my personal stuff that I have on it.

  You can clear your phone remotely while it is unlocked.  Everything will be removed.

• How to remove all information from the computer so I can sell it?

  How to remove all information from the computer so I can sell it?

  Hello

  You will want to format the hard disk:

  1. you can use DBAN - http://www.dban.org/

  or

  2. you can follow this tutorial to clean install up to the step where you format the disk, in which you would then STOP (because you just want to get rid of the files on the hard drive, do not install Windows) - http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html

  Kind regards

  Patrick

• Data merge problem - bad values when exporting PDF with "All folders" only

  Hi - I have the weirdest problem with InDesign: I use merge data from .csv to create a deck of cards (9 per page), and when I export to PDF from the data merge Panel, one of my field has erroneous data: it uses values from previous records and which repeat.

  What is strange, is that when the noticed, all right. Is also very good if I create a merged Document and PDF export. Is also very good if I export to PDF using just the range of entries it is play: I don't get that wrong data if export as PDF, "All records" in the data merge Panel.  Very frustrating!

  Someone saw? I feel that my data is ok, if the export of individual records is very well...

  Cheers for any help.

  Thank you! Which has me on the path to what looks like a fix...

  Copy all the fields in a new file does not solve the problem - the same behavior, but after the start of charges, I started to adjust the sizes of the fields and stumbled upon a possible solution.

  A field that trouble is a text box for a single digit, if limits are quite small. The name of the field for example placeholder. > is bigger and complained of cut-off text.  Increase the limits of the text box to be at least the size of the reliable placeholder text solves the problem. It decreases the size of a single digit... back of the problem.

  How weird.

  Thanks Peter.

• Can I export and collect all the image files in my Muse site?

  Can I export and collect all the image files in my Muse site?

  Hello Peter,.

  Please go to file > export to HTML format and export your site in a folder you want.

  In the same folder, you will be able to see a folder named "Images" that will contain all the images used in the site.

  Kind regards

  Vivek

• I had a document that has been signed by 2 signatories then cancelled by approver (valid but wrong approver email address) that I have to restart as a new process or can I recover all informed and simply change the approver to the right person?

  I had a document that has been signed by 2 signatories then cancelled by approver (valid but wrong approver email address) that I have to restart as a new process or can I recover all informed and simply change the approver to the right person?

  Hey fryebd,

  If the approver has not accepted this agreement, then the transaction would have been cancelled automatically, and you can start with a new process.

  Kind regards

  Ana Maria

• I used REGEXP_REPLACE to remove Scott. is it possible to delete all information on Scott and storage simultaneously using REGEXP_REPLACE...?

  I used REGEXP_REPLACE to remove Scott. is it possible to delete all information on Scott and storage simultaneously using REGEXP_REPLACE...?

  
  

  Select REGEXP_REPLACE (dbms_metadata.get_ddl('TABLE','EMP'), '("Scott")', ", 1, 0, 'i') twice;

  
  

  result:

  CREATE TABLE 'EMP '.

  (SELECT 'EMPNO' NUMBER (4,0) NOT NULL,)

  'ENAME' VARCHAR2 (10),

  VARCHAR2 (9) "JOB."

  "MGR" NUMBER (4,0).

  "SAL" NUMBER (7.2).

  "DEPTNO" NUMBER (2.0)

  ) PCTFREE, PCTUSED, INITRANS 40 10 1 MAXTRANS 255 NOCOMPRESS SLAUGHTER

  TABLESPACE 'USERS '.

  
  

  I want to:

  
  

  CREATE TABLE 'EMP '.

  (SELECT 'EMPNO' NUMBER (4,0) NOT NULL,)

  'ENAME' VARCHAR2 (10),

  VARCHAR2 (9) "JOB."

  "MGR" NUMBER (4,0).

  "SAL" NUMBER (7.2).

  "DEPTNO" NUMBER (2.0)

  )

  Hello.

  In fact, it's a Japanese forum here.

  I'm sorry, English is not good for me...

  According to the reference,.

  DBMS_METADATA

  The description of the parameter called SEGMENT_ATTRIBUTES, it is written like this.

  > If TRUE , include clauses attributes segment in the DDL. If FALSE , omit them. Default value is TRUE .

  Before you SELECT it, it's OK if you run the following.

  exec DBMS_METADATA. SET_TRANSFORM_PARAM (DBMS_METADATA. False SESSION_TRANSFORM, 'SEGMENT_ATTRIBUTES',);

  I hope you find it informative.

• Export list of all the stored procedures in the database settings.

  Hello
  
  How to export the settings all stored procedures in the database list(IN / OUT).
  
  Thank you
  
  Published by: Shema on August 8, 2012 06:28

  select * from ALL_ARGUMENTS;
  

• Some videos do not play when 'Block all information on this computer storage sites' is selected

  I have CS5 installed on my Mac, running OS X Lion 10.7.5 i. Using Firefox, I had problems with Adobe TV and the other educational video, however some of the video promoting the new products don't work (not all), but when I right click the menu gives me an option that tells flash player 11. anything that works. I uninstalled and reinstalled the version provided with my CS5 Design Premium, only to be told that I have to update my flash player, when I then even that nothing happens again to play the video.

  I can however run the video on my iPad 2 with Safari, have not put up, but with Firefox. It becomes a real pain to make room on my desk to see two screens so that I can use the tutorials, videos and advice while working on various programs. I checked all questions in the forum who have something close to my problem to solve the problem. Unfortuately none of the suggestions posted so far have helped.

  If anyone has any other suggestions for me, I would be really grateful.

  Thank you very much, Tess.

  Thanks for the update.  I shifted to its own thread and assigned a more descriptive title to make it easier for others to discover when looking for the forums.

  The video player on the Web site that you are using is not loaded in the case where the local storage is disabled in Flash.

  If you select "Ask Me before allowing new sites to save information about this computer", you will get a prompt when a website wants to store information on your computer.

  If you choose 'Block all information on this computer storage sites', we never go to display a command prompt.  This can cause some content that depends on storage local to fail in unpredictable ways.

  None of these options are really has a good user experience, but is provided to give people a granular control over their privacy options.

  Flash Player private ways or modes of navigation Incognito on major browsers.  In this case, Flash will store information in a temporary directory for the duration of your browsing session, but all this information is ignored when you exit the navigation mode private or incognito.  For most users, this is the way to go.  Advertisers cannot use Flash Player to keep chips that identifies you uniquely for several sessions of navigation, but you provide Flash content that depends on access to local storage with the ability to function normally.

  Thank you!

• Export several pieces of information into a single CSV file

  Hi guys,.

  I try to export the information to a .csv file.  At the end of the day, I want the following information in the CSV file with the following headers:

  Name, NumCpu MemoryMB, Description, NetworkName

  
  I can get all the information for the first four topics (name, Description, NumCpu, MemoryMB) with the following command:

  Get - VM MYVM | Select Name, NumCpu, MemoryMB Description | Export-Csv-path "c:\outp\VMs.csv" - NoTypeInformation

  For the VLAN (aka NetworkName) I run the following command:

  Get - VM MYVM | Get-NetworkAdapter | Select NetworkName | Export-Csv "c:\output\VMs.csv" - NoTypeInformation

  The command to run successfully, however the second command is to crush the first information.  I tried - add the switch which gives an error, which suggests that I use - force, I also tried, that is the best that I could realize all the information exported, but with the unwanted spaces.  Is there an easy way to combine these two orders and export them to the CSV on the same line?

  Thank you.

  Use a calculated property.

  Try like this

  Get - VM |

  Select the name, NumCpu MemoryMB, Description,@{N='NetworkName'; {E = {Get-NetworkAdapter - VM $_______ | select - ExpandProperty NetworkName}} |

  Export-Csv-path "c:\outp\VMs.csv" - NoTypeInformation

• Script to export the virtual disk information in a specific format

  Hi all

  First too all the Scripting Guys who I borrowed the code here, thank you!

  Now, I was able to get all the information I want vcenter but I have problems with two of the scripts I wrote.  It is with regard to obtaining information on the virtual disks associated with all virtual machines in the environment.

  I was able to export the data, but I get a line by VM that does not work for the way in which we want to use the data.

  What I am looking for is a csv export with one line per virtual machine that looks like:

  VM number 1, hard disk number 1 name number 1 datastore, path of vmdk number 1 hd, hd number 1 capactity, number 1 hd, hard drive controller number 2 name,... up to 7

  name of number 2 VM...

  Thank you!

  Alec

  OK, I see what happened.

  The 2nd block is to create empty properties in the object.

  The value should be $null like this

  $report = @()foreach($vm in Get-VM){  $row = New-Object PSObject -Property @{Name = $vm.Name}  $i = 1  Get-HardDisk -VM $vm | %{    $row | Add-Member -Name "Disk #$($i) Name" -Value $_.Name -MemberType NoteProperty    $row | Add-Member -Name "Disk #$($i)" -Value $_.FileName.Split("/")[1] -MemberType NoteProperty    $row | Add-Member -Name "Disk$($i)path" -Value $_.FileName -MemberType NoteProperty    $row | Add-Member -Name "Disk$($i)Capacity(MB)" -Value ($_.CapacityGB*1024) -MemberType NoteProperty    $row | Add-Member -Name "Disk$($i)Controller" -Value ($_ | Get-ScsiController).Name -MemberType NoteProperty    $row | Add-Member -Name "Disk$($i)Datastore" -Value $_.FileName.Split(']')[0].TrimStart('[') -MemberType NoteProperty    $i++  }  while($i -le 8){    $row | Add-Member -Name "Disk #$($i) Name" -Value $null -MemberType NoteProperty    $row | Add-Member -Name "Disk #$($i)" -Value $null -MemberType NoteProperty    $row | Add-Member -Name "Disk$($i)path" -Value $null -MemberType NoteProperty    $row | Add-Member -Name "Disk$($i)Capacity(MB)" -Value $null -MemberType NoteProperty    $row | Add-Member -Name "Disk$($i)Controller" -Value $null -MemberType NoteProperty    $row | Add-Member -Name "Disk$($i)Datastore" -Value $null -MemberType NoteProperty    $i++  }  $report += $row}
  
  $report  | Export-Csv -path virtual_disks2.csv -notype
  

• export of IPTC location information

  When I export a collection of images in Lightroom keywords and description so that copyright etc all come just with them.  IPTC location information does not (despite checking 'all' in the window export) how can I get the tags of country, State, city, secondary, I added the files to export?

  Why NOTHING does the IPTC extension Panel?

  LR metadata fields > IPTC Extension Panel fill in the fields that appear under the panels Extension IPTC Photoshop and bridge.   Although they have in common some labels, the Extension and Core fields are actually completely separate groups of fields.

  How do you get the fields to fill in the main draw instead?

  I can't help on that.  I think that you can customize in Photoshop and Bridge metadata panels (for example, see this thread), but it seems pretty involved and only partially documented.

• I installed Win 7 to 64 - bit and lost all information in my Lightning Calendar

  I used PCMover to help upgrade (not perfect, but VERY good).

  Thunderbird is now working, as it is the lightning calendar, but all the content of the calendar went.

  Before the upgrade, I made a copy of everything on my main hard drive, so the old information should be here somewhere. Can someone tell me, please?

  Thanks much for any help.

  I've been misled on my initial search for data by some outdated information. I found it now, and it all works.

  In case someone considering this question, the relevant answer for me was

  > > location changed to Lightning 0.9 to Lightning 1.0b1. Now storage.sdb only contains information about the version of Lightning and is necessary for compatibility reasons. The events and tasks of local calendars is stored in the calendar-data/local.sqlite. Information about calendars such as the location and the settings are stored in the prefs.js. < <

• IPhone 5 c locked and lost all information.  Cannot rememvber responses to the issue of security

  SIRI has been activated on my Iphone 5 c.  I tried to open the phone several times, but couldn't and the phone has been disabled.  I took it to a technician and he opened it but advised that all the information has been cleaned from the phone.  Now, I'm trying to see if I can retrieve the info but I don't remember one of the responses I had for security issues.

  Is there anyway I can reset the security questions?  I would appreciate your help.

  Green Island

  Apple ID: Contact Apple for the Apple ID account security support

  But that won't help you to recover your information unless you it synced to iCloud or saved the phone to iCloud.