Extend the 'footage' imported PSD layers

Similar Questions

• import psd files problem

  I have psd file import problem. 1: I don't see most of the items on the window pop up.

  When I click on 'Cancel' or 'import', I get the error message below. It still import psd layers but

  I reboot but I have the same result. Anyone know how to fix this?

  You're on a retina display?  Try to remove or pixelation of text layers. other people have reported that the bug has been corrected on their end.

  The same bug is discussed in this thread the Advanced Options to facilitate import dialog is not visible (OS X 10.11) and Adobe staff is aware and looking inside.

• How to import multiple files with the same parameters psd?

  Hi all

  I'm working on a project that requires me to import batches of psd (about 300-400 PSD) files. now when I import PSD files, I have to click all the dialog boxes appearing individually seeking to import the PSD as all merged layers or as sequences.

  now, I have to click 'ok' to all these Photoshop PSD.

  are there not in a way where I can import all Photoshop PSD with the same settings applied to all?

  Thanks in advance for your answers.

  Kind regards

  Unfortunately, the answer is no: one at a time.

  Just curious as to why psd to 300-400?

• I can not import PSD file to After effect in the form of composition.

  I can not import PSD file to After effect in the form of composition.

  When I try to import the PSD file according to the effect CC (2015) as a composition, AE will stop responding and then I have to close and restart the application.

  After effect CS6 works very well, but AE CC does not not and will close while I try to import the PSD file as a composition.

  can anyone help?

  Hi good morning all.

  I finally found what causes this problem.

  That I've added the link of 3ds max compositor (CEAP) to my folder plugin effects Jefferson, sequelae stops responding to PSD (import in the form of layers as a model) files.

  then, after the removal of this file (CEAP) every thing change to normal mode.

  now the question is only how to use 3ds max scene after effects without this headache.

  Thanks for everyone.

• Workflow for multiple files .psd to enter the first form of layers - CC 2015

  I need to import multiple files (30 +) Photoshop in first and keep the layers intact (for the basic animation).  I started to put in yesterday and someone, please tell me that there is a better workflow!

  Here is what happens... I do a sandbox for images and make sure it is open (for all files go).  I go into the media browser and select the file (by selecting several files do not work - nothing happens).  I import that a TI asks if I want to merge layers.  I say 'no' and it is important the .psd as a new bin in my Sandbox to images and * open * the new bin.  I then click on the new tray to close, and then click on disable the tray (so the next file will not go in the bin).  Can I import, say 'no' to merge the layers, he brings as a new bin and * opens both * bins.  You see where I'm going with this, right?  Every time I have import a .psd must make the same choice to merge not (I couldn't find a preference to change it anywhere) and, if that weren't enough boring no, ALL .psd locations open when a new file is imported and so I have to manually, click to close them all before I can import another file.

  How many clicks does take to get to the center of a Photoshop file?  A heck of a lot more than I want to click!

  Is it possible to set the preference always import a .psd in layers?  And if not (I will file an application as soon as POSSIBLE) is it possible to prevent the .psd bins to open all the time?  It took me half an hour just click to get all of my images in.  It's not cool!

  Allynn

  Import PSD is one at a time, I'm afraid.

• Why the Premiere Pro CS4 is only 10 seconds of .psd layers Photoshop CS4?

  Why the Premiere Pro CS4 is only 10 seconds of .psd layers Photoshop CS4?

  I have a second clip 24 I have stratified in Ps and when I import the psd in Pr THE SEQUENCE IS STILL ONLY 10 SECONDS!

  How can I change this?  Why does this happen?  I really need to know as soon as possible.  I have a video project due this Wednesday (certainly that's an AV class where I learn just PR.  "But I can learn VERY QUICKLY!)

  Thanks for your help.

  -OSXniCKels

  Just in case I wasn't clear in my last line ' just click-and - drag on the tail of your.» PSD to set the desired time,' once you have imported your. Just PSD (for example, images), you can drag in the timeline panel, click and drag on the right margin (the tail) and stretch his time because it takes.

  Now, if you have imported as a sequence, open the timeline of the sequence and do the same thing.

  Normally, I will put my Edit > Preferences > again I think will be applicable, make my Import, and then with the Info Panel, just change the duration in office.

  Good luck

  Hunt

  PS - Welcome to the forum.

• I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now want to import some RAF b HD files

  I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now have to import some RAF of the HD files but LR shows them as dazed out and said that they have already been imported when I hover over the thumbnail. I have this problem when importing files in the same HD Canon CR2, and who have been treated exactly the same. Anyone got a clue as to why this is happening? Thanks, Phil

  Hi Phil,

  If Lightroom then reads these as duplicate files, it shows that they are already present in your Lightroom Catalog.

  You can search by file name and check if the image is present in your library.

  Kind regards

  Claes

• 'Origin' and form layers empty in the file freda.psd

  I opened the file "freda.psd" and noticed a layer named "Origin" in the record of the head and even a few layers that seem to form layers that are empty, IE. try to turn all that is in the layer so that you can see where it is, opens the message "could not change because the bounding box original is empty.

  What are these layers for?

  Why are they empty?

  How to move them to define an origin (I presume they are supposed to be points pivots or something)?

  Thank you.

  You can create handles in Photoshop using the pen with the option of "shape". It's just a single point which animation character can be used as a handle for various purposes.

  You can also create these same handles in the Panel of the puppet. Check out DaveS tutorials for more information.

• The imported PSD graphics become darker

  Hi all

  I am very new to ID and it's my first crack to make a new document with her. I created 2 graphics card for a header and a footer and placed them both in my identity document, but they both changed a darker color of the originals in PS. I can't read the text on them very well either. I exported to PDF and the text is readable, but the colors of the graphics are not the same as PSD files. I have a problem with the resolution on the graphic that I know, they were created at 300ppi that is too high, so I changed the lines down to 96ppi, but it affected the PS embossing effects so I went back to 300 ppi. This should have nothing to do with the color well.

  Any help appreciated.

  Thank you

  Stuart

  Your color settings in Photoshop and ID? The images have embedded profiles? Will there be transparency in images? What color space they are registered in, and what is transparency of fusion defined in ID space?

• Some import photoshop layers are empty squares [LOCKED - in double thread]

  Hey guys! I'm new to After Effects and I have a big problem.

  I created an image in photoshop, consisting of several layers of each with a little white line 1 layer with text and 4. The image is set to RGB. So I save it to my computer and go to the AE. Once I import the psd as composition I see is called 'Logo' (which I saved as psd).  You will find below is a drop-down list display of each layer. I would like to animate the layers individually, so I select all and drag them down in the timeline panel, but in the preview, it shows all my layers of line as just white squares containing the entire layer. The only layer that works as expected is the text layer, which shows the text, then the white background. I my AE background for black if this matter the value. Oh, and the composition of the Logo, which has imported looks as it should in the preview.

  You guys could help me understand what goes wrong?

  I think that this question has been answered here: on the imported photoshop layers white.

• Open the file in .psd PhotoShop CS6 currpt/no:(mon travail beaucoup)

  Hi friends,

  Today accidentally my photoshop has closed at this moment there, I work on my model of the last 2 months demo work, so once again, I open my file .psd is the guest of the error "Could not complete your request because the file is not compatible with this version of photoshop".

  Several times, I'm trying, but it can not open my .psd file. If someone in the face of this type of problem or have any solution for this problem I'll be very grateful to you, of course its my two months of hard work.

  Thank you

  Here is something that is works in many cases. You will use fires of artifice to open and re - save the Photoshop file. This will fix the majority of corruptions.

  Open the corrupted Photoshop file in Fireworks.

  Fireworks lets save the .psd Photoshop format. (Important: do not save a Fireworks file or another extension, because Photoshop may not recognize the layers, or you could lose data.)

  Don't forget to give your file a different name when recording, so you will not overwrite the original. (A good idea would be to create a backup of your original before trying this procedure).

  Open your newly created file in Photoshop.

  Do not forget that many effects will not show in Fireworks, but should appear in Photoshop layers.

  If that does not work, try to look at the answer here: http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/590-restoring-a-corrupted-ps "d-file"

  Try a repair tool:

  PSD repair kit is the ultimate Adobe PSD repair tool that is a must - have for any artist, digital, photographer or other professional working with numerous PSD files.

  For more information: http://www.psd.repair/

• Replacement of all PSD layers when a PSD file name has changed

  Does anyone know how to quickly add a link to all layers in a PSD file, if the name of the PSD file has been changed?  At present, it seems that I have to add a link to each individual one layer.

  For example, I have a PSD with 100 + layers imported in my project, but I would now like to rename the PSD file. Of course, when I do this, AE sees the PSD as 'missing' and there seems to be no way to add a link to all layers for new PSD file name?  I have to click on each individual layer and replace one by one.

  Any ideas?

  See you soon

  Nope. It's just how it works. AE has no way to know about this either on changes to your PSD files, since the structure of PSD files is not persistent - a simple reorganization of the layers can make a mess. Where EI is able to reference absolute paths with all the disadvantages.

  Mylenium

• Import psd files batch

  I have 60 files psd small with only 4 to 6 layers of each, but I want to import into first. It is a common workflow for me, but whenever I have to import the files one at a time, and then click Import in the form of individual layers. I want to make once and import all 60. In the import box I gives me a choice on the right side to cancel, select all or nothing, but selecting it does not work for me. I know it will be something simple, I don't... always is, but... I use the last first and Photoshop and Windows 7. Suggestions? Thanks for your time.

  Good news, bad news:

  The good news is that you do not miss something simple. The bad news is that the Agency does not provide a way to import batch PSD with the same layer treatment setting.

  You're not the first to request this feature, and it's high enough in our backlog of requests. Of course, as always, we cannot leave even when it could become reality.

• How to extend the button with a shadow?

  I had never used Photoshop. I found a beautiful button: http://www.psdchest.com/2011/05/09/web-elements/ and I would like to Customize so that it includes the words driver or passenger. What are the tools I should to use and in what order to extend the button with Shadow and perhaps also to reduce the angle of rupture? I can for only change the text . Link psd file I mean the Group-> light-> switch 1 on.

  So far, it looks good.

  For the choice of bevel (hold down Apple key to select multiple layers at the same time) track of the layers and re - adapt (Edit/transform/Scale) to give it less deep. I suggest grabbing the right conner down and moving upward and to the left, you'll see what I mean.

  Form 3 copy 10

  Form 3 copy 4

  Copy of the form 2

  After that, you will see the layer from below black. You must re - this scale itself to achieve the effect. Its file name is: form 3 copy 3.

  I'd love to see how it comes out.

• Motorcycle G How can extend the signal of text

  When I get a signal for a coming text, it gives only a short warning.

  Is there a way to extend the warning sign?

  As when you set the alarm, it shuts down until you stop

  Personally, I think it should be this way that SMS are not guaranteed delivery. They may fail in the middle and the sender and the receiver cannot ever - if something is important, someone should make a phone call. Then both parties know that the message has been received (assuming that no voicemail).

  If you want more, then check out the text 3rd party programs and see if they will alert up to stop. If you get a lot of text messages, this could be a nightmare.