Extended DateTimePicker State does not work in QML

Similar Questions

• Satellite P850-133 - extended graphics card does not work

  Hello!

  I got my 2 new p850-133 and they have reinstalled with a new copy of Windows 7, and then the extended graphics card does not work, he said: "code 10" failed to start, what to do, the hd4000 intel integrated works really well.

  Hello

  The laptop is equipped with a GPU NVIDIA® GeForce® GT630M.
  The European driver Toshiba page provides 3 different display drivers.

  2 drivers for nVidia GPU (v296.0 for the 3D and v296.01) and one for Intel (v 8.15.10.2712).
  You must install the Intel driver and one of the nVidia drivers.

• Delete statement does not work properly

  Hello
  
  The following delete statement does not work correctly.
  If I press DELETE will delete everything in the table of categories
  I don't know whats wrong with it.
  -Delete category line if there is not the infrastructure to support-
  IF: P12_DFCY_SEQNO4 IS NOT NULL AND: P12_DFCY_CATG_C = "7" THEN
  REMOVE FROM DFCY_CATG
  IF NOT EXISTS (SELECT I.DFCY_SEQNO
  OF DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
  WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
  AND: P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
  end if;
  
  Thank you
  Mary

  You probably the where more clause:

  DELETE FROM DFCY_CATG
  WHERE C.DFCY_SEQNO = :P12_DFCY_SEQNO4
  AND NOT EXISTS(SELECT I.DFCY_SEQNO
  FROM DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
  WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
  AND :P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
  

  Not sure if this is the exact name of your column in the table, but that limit the scope of deleting just a record that you control.

  Hope it will be useful,

  Aaron

• Master page with rollover menu, using States, does not work for all pages?

  Hello.

  I created my masterpage with a basic at the top menu. It has two States. The 1st State is normal and State 2 is a simple rollover behavior, just a different color.

  Why my menu would work perfectly on the page ' 01', but then the reversal function does not work for other pages? (portfolio 03 etc.). She has just the hoverover slider and the link, but the color does not change.

  I have something wrong?

  Thanks a lot for all the help on these forums

  Make sure that all the subpages have a second State added to them. You

  do not put any content on this State, but it must be present

  the transfer of work from the watch page.

  If you do not already have that second State, trying to link then cancelled

  the subpages of the master page. I came across this scenario recently

  because I had created a master page after some of my subpages have been

  already built.

  HTH

  Jim Babbage

• If the else statement does not work... worked in AS2?

  Hello

  have a very common function that I use in educational quiz itself noted the user according to their score (from answering multiple choice questions). So I put in place a variable called score without problem... but when I apply my confidence "if else"heuristic of AS2... I have all these errors and my flash file does not work. "

  Is there a better way to code that I'm not aware of?

  Stop();

  If (score < = 5) {}
  endMsg.gotoAndStop ("score1");
  } Else if (score > 6 and score < = 11) {}
  endMsg.gotoAndStop ("score2");
  } else {}
  endMsg.gotoAndStop ("score3");
  }

  feedback video called "endMsg" - according to the function, navigates user to label that provides feedback.

  Any help would be awesome... coz this feature used to work! It doesn't work even in Flash CS4 when I retrograde Panel actionScript to version 2 to test!

  I missed using try IT...

  } Else if (score > = 6 & score)<=>

  I know they used to support the use of words for or, but never made a practice of it, so I can't say if they do not support in AS3.  In addition, as long as there will be a score of 5.5, you should be fine.

• If the statement does not work/be executed

  I have a button that makes a flip on the x axis 180 if his name is not in a table called "shutters", it determines this by running an if statement. If his name is in the table then the button to run the code to do the folding panels. However, it is not. He let the sign flip one way, but does not have the code for it folding. I was wondering if someone could take a look to see if they know why...

  Code is linked below.

  http://pastebin.com/mc7457

  Thank you

  I don't want to pretend that I understand what you try to do it with the code, but the last section to see ms to be a little hard to swallow.  I don't see any sense in declaring conditionally works, in the call to them.  If I had to guess at a rewrite of the code, it would be...

  photosPane.addEventListener (MouseEvent.CLICK, photoinout);

  function photoinout(e:MouseEvent):void {}
  If (panes.indexOf ("photos") =-1) {}
  addEventListener (Event.ENTER_FRAME, photosrotate);
  Panes.push ("photos");
  trace (Panes);
  } ElseIf (panes.indexOf ("photos") = 0) {}
  addEventListener (Event.ENTER_FRAME, photosrotateout);
  trace ("stuff");
  }
  }

  And insofar as these ENTER_FRAME listeners go, you should remove them in the functions they call as soon as they reached their goal.  Otherwise, they will continue to call these functions several times.  Example:

  function photosrotate(event:Event):void {}
  If (photos.rotationX<>
  photos.rotationX += 6;
  } else {}
  removeEventListener (Event.ENTER_FRAME, photosrotate);
  }
  }

  And, as I said, due to my lack understanding, if my remarks do not apply, I meant no harm.

• Style in mobile application issues statement (does not work)

  Hello

  In a simple mobile Flex application, I have a simple view with a styleName assigned to a VGroup it contains. The decleration is in the same point of view (for the sake of trying to make this work, but it is in an external css, if I find a way to make it work).

  The padding, I assign just does NOT at all. Nothing. While if I specify in the VGroup directly is paddingTop or another style, it works very well

  Weird behavior.

  Here's the view:

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:View ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark" title = "HomeView" >

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < fx:Style >

  {.myGroup}

  paddingTop:200;

  paddingLeft:300;

  paddingRight:30;

  }

  < / fx:Style >

  < s:VGroup styleName = "MyGroup" >

  < s:Label text = "Hello" / >

  < / s:VGroup >

  < / s:View >

  Anyone has any idea why?

  I use Flex 4.6/AIR 3.6 for the moment, he tried with Flex 3.4 4.9.1/AIR too, same behavior.

  Is this a bug? I'm doing something wrong? Y at - it a hack/trick to make this work that specify the styles directly in the MXML?

  Thank you.

  Just realized that the padding in the VGroup aren't styles more but is properties. Damn these spark components

  I guess that's why, and I think it's a disappointment. I know that I could hack this, but condemned me!

• Simple if statement does not work! Help!

  Did YOU get my first image on the timeline to control a movieclip. Look like this:
  
  If (mymovie._currentframe == 10) {}
  myMovie.Stop ();
  }
  
  
  If she has to stop on the frame of 10, but it doesn't. What is the problem with the script? Do I need some sort of function before?
  
  Thank you!

  > So there's no way to control the movieclip from another frame?
  # You can assign actionscript for objects that are available on the timeline. In your scenario, you try to assign a script to the object that does not exist. myMovie is unavailable on the first image. If Flash Player do not know the object names "mymovie" If the call fails silently. While on the second image, as the 'mymovie' object is available, the assignment of onEnterFrame works.

  Hope that answers the question.

• Still 'Away', the State does NOT work

  I recently registered in Skype for linux 4.3, and on a separate account under windows, even if Skype for linux said it was 'Online' on my separate account on windows and to all those who had this account as a contact, it was still 'Away', even if Skype for linux said it was "online". In line/Away status on the linux client Skype works do not is a HUGE problem, and I really hope this is addressed soon

  

  There is difficulty, type directly in a chat on any conversation window, restart your Skype and BAM, your status will be fixed!
  
  Awesome, finally. This command should run automatically whenever you connect to Skype for linux or something...

• Case statement does not work

  Dear all,

  We have the database oracle 11g r2 on windows.

  I created under function: -.

  SQL > CREATE OR REPLACE FUNCTION FUNC_TEST (P_TEST VARCHAR2)

  2 RETURN VARCHAR2

  3 AS

  4 V_TEST VARCHAR2 (20);

  5

  6 BEGIN

  7

  8 V_TEST: = P_TEST;

  9

  10

  11 CASES

  12. WHEN V_TEST = UPPER ('%UU%') THEN V_TEST: = REPLACE (V_TEST, 'UU', 'U');

  13. WHEN V_TEST = UPPER ('%OO%') THEN V_TEST: = REPLACE (V_TEST, 'OO', 'O');

  14. WHAT V_TEST = UPPER ('%NN%') THEN V_TEST: = REPLACE(V_TEST,'NN','N');

  15 ELSE V_TEST: = "CHANCHAL";

  END 16 CASES;

  17

  18

  19 V_TEST RETURN;

  20 EXCEPTION SO THAT OTHERS THEN

  21 DBMS_OUTPUT. PUT_LINE (' THERE IS AN ERROR ');

  22 END;

  23.

  The function is created.

  SQL > SHOW ERR

  No errors.

  SQL > SELECT FUNC_TEST('toon') FROM DUAL;

  FUNC_TEST ('TOON')

  --------------------------------------------------------------------------------

  CHANCHAL

  above function should show 'YOUR' build 'Toon' but its display "CHANCHAL";

  I train hard get the result OK but could not get it.

  Any suggestions would be very helpful.

  Kind regards
  Chanchal wankhade.

  Hello

  Chanchal Wankhade wrote:

  Dear all,

  We have the database oracle 11g r2 on windows.

  I created under function: -.

  SQL > CREATE OR REPLACE FUNCTION FUNC_TEST (P_TEST VARCHAR2)

  2 RETURN VARCHAR2

  3 AS

  4 V_TEST VARCHAR2 (20);

  5

  6 BEGIN

  7

  8 V_TEST: = P_TEST;

  9

  10

  11 CASES

  12. WHEN V_TEST = UPPER ('%UU%') THEN V_TEST: = REPLACE (V_TEST, 'UU', 'U');

  13. WHEN V_TEST = UPPER ('%OO%') THEN V_TEST: = REPLACE (V_TEST, 'OO', 'O');

  14. WHAT V_TEST = UPPER ('%NN%') THEN V_TEST: = REPLACE(V_TEST,'NN','N');

  15 ELSE V_TEST: = "CHANCHAL";

  END 16 CASES;

  17

  18

  19 V_TEST RETURN;

  20 EXCEPTION SO THAT OTHERS THEN

  21 DBMS_OUTPUT. PUT_LINE (' THERE IS AN ERROR ');

  22 END;

  23.

  The function is created.

  SQL > SHOW ERR

  No errors.

  SQL > SELECT FUNC_TEST('toon') FROM DUAL;

  FUNC_TEST ('TOON')

  --------------------------------------------------------------------------------

  CHANCHAL

  above function should show 'YOUR' build 'Toon' but its display "CHANCHAL";

  I train hard get the result OK but could not get it.

  Any suggestions would be very helpful.

  Kind regards
  Chanchal wankhade.

  I think you meant:

  CASE

  WHEN SUPERIOR (V_TEST) LIKE "% UU" THEN V_TEST: = REPLACE (UPPER (V_TEST), 'UU', 'U');

  WHEN SUPERIOR (V_TEST) LIKE '% OO %' THEN V_TEST: = REPLACE (UPPER (V_TEST), 'OO', 'O');

  ...

  '%' is a wildcard character only on the right-hand side of the LIKE operator. '%' has no particular meaning when you use the = operator.

  You can also use a CASE expression, rather than a CASE statement to this:

  v_test: = UPPER (p_test);

  v_test: = BOX

  WHEN v_test LIKE "% UU" THEN REPLACE (v_test, 'UU', 'U')

  WHEN v_test LIKE "% UU" THEN REPLACE (v_test, 'OO', 'o')

  ...

  END;

  Whatever it is, if v_test contains different models (for example "HOOVER VACUUM"), only 1 of them will be changed.  Is that what you want?

  If this isn't the case, after a few examples of data (CREATE TABLE and INSERT statements) and the results desired from these sample data.  Explain how you get these results from these data.

  See the FAQ forum: https://forums.oracle.com/message/9362002#9362002

• Help with the situation where a simple group by statement does not work

  There is a table with two columns, which is memo (varchar2), another is recording_date (date). This table is used to recode an every day event. Right now, I need to know how many events registered each day during the time period (between any of the given day and any given end day). the result by selecting should have two columns the numeration of the event, the recording_date. chances are one day it is not just any event, in this situation there not all inserted rows so far here, but the result by selecting must contain also that day with the column count is set to zero.

  between 2010-4-5 and 2010-4-8
  Count   recording_date
  2             2010-4-5
  0             2010-4-6
  1             2010-4-7
  9             2010-4-8

  Can anyone help with this? Thank you in advance!
  Kind regards!

  Hello
  See if this helps:

  I create a dummy cursor that contains one row for each day of the last year - I then outer join the result of the query against the log_table.

  Here are my RAW file
  Select * from log_data

  07/05/2010 1, TEST
  TEST 2 05/05/2010
  02/05/2010 3, TEST
  30/04/2010 4, TEST
  TEST OF 5 30/04/2010
  30/04/2010 6, TEST
  7-30/04/2010 TEST
  8 TEST 06/05/2010
  9 TEST 06/05/2010
  10 06/05/2010 TEST
  11 06/05/2010 TEST
  06/05/2010 12, TEST
  13 TEST 06/05/2010
  2010-05-06 14, TEST
  15 06/05/2010 TEST
  16 06/05/2010 TEST
  2010-05-06 17, TEST

  And here's the query

  with date_ranger as (select trunc (sysdate-) level datecol
  from dual connect by level<= 365="">
  RAW_DATA as)
  Select recording_date, count (*) numrows in log_data
  Group of recording_date)
  Select datecol, date_ranger numrows, raw_data
  where = date_ranger.datecol raw_data.recording_date (+)
  and datecol sysdate-10-sysdate
  order by 1

  And the result

  1 28/04/2010
  2 29/04/2010
  30/04/2010 3, 4
  4 01/05/2010
  02/05/2010 5, 1
  6 03/05/2010
  7 04/05/2010
  8 05/05/2010 1
  9 06/05/10/2010

  What you want?

  See you soon,.
  Harry

• Active state does not properly in Chrome

  Hello

  I recently exported the site I created in HTML and everything seems to work well. The only problem I encounter is that active State does not work in Chrome. When I scroll to the bottom of the page, the color of the active state is not reflected. This does not work in IE, Safari and Firefox. Really need this to be resolved soon. Help, please!

  Thank you!

  Ryan

  Hi whyax84 and Zak.

  Download Yes it indeed solved the problem for chrome. Thank you very much!

  Kelvin

• Rollover State does not not on active state

  Hi, I have a problem with the menu States. The rollover State does not work when a menu item is in its active state. This is supposed to happen or is there a solution to this?

  Thank you.

  Hello

  This works as expected. Active state removes change it to any other State on the interaction of the mouse and other States work only on the links that are currently in Normal condition.

  See also: https://forums.adobe.com/thread/1136562

  See you soon,.

  Vikas

• Menu rollover State does not have the button active parent

  My menu rollover State does not work the button parent in my menu while I'm on a page of the child. I didn't have any currently active States in the menu. How can I get the parent menu to respect the rollover State even while I'm on one of the child pages?

  Please check this thread:

  https://forums.Adobe.com/message/6148234#6148234

  Thank you

  Sanjit

• In the United States, I can use selector locale quick to get U.S. locale of Russia but in Russia, it does not work to go the other way or any other premises than elsewhere. After selecting a new language and restarting firefox, it remains on the Russian

  In the United States, I can use selector locale quick to get us to the locale of Russia (ru - RU), but in Russia, it does not work to go the other way or any other premises than elsewhere. After you have selected the local new and restart firefox, it remains on the Russian locale. Y at - it a fix for this problem?

  This has happened

  Each time Firefox opened

  == Looks like it started with a newer version of firefox, but this may have been coicidental

  You have other language packs languages installed?
  Tools > Modules > languages

  There is no module language en-US, to achieve that you must install the version of Firefox en-US and install other languages in the version.
  http://releases.Mozilla.org/pub/mozilla.org/Firefox/releases/3.6.6/Win32/XPI/

  See also http://kb.mozillazine.org/Language_packs