External html page in flash
How to load external html page into flash? (AS3)
You cannot load an html page into Flash, but you can try to load the html code that it contains in a textfield. Flash supports only a very limited number of html tags, so it is highly likely, you won't get what you're after, if you read an html file that has not been edited specifically for Flash. Just look to the top of the TextField.htmlText property in AS3 help documents and lists the html tags that are supported.
For AS3 you must look in the URLLoader class as much as loadng an external text file is.
Tags: Adobe Animate
Similar Questions
-
The difficulty to connect to an html page in Flash.
Hello
I have been using Flash for a short time and have learned how to create a rotating banner. At this point my problem is to add an access point or a link to each image highlighted in the Flash animation. Can someone take a look at my flash file and provide me with an example of actionscript code that allows each image in the slide show to post a link to a different page within my site. A dummy link is Shop_DVDs.html or a full url could be www.bikepaparazzi.com. Any help would be greatly appreciated.
I have attached the Flash files.
Hi XonoBoom
See the attached file.
Don't change anything in the records and check out.
If she any problem ping - me.
Saransoft
-
Jump to an external HTML file loaded anchors
I loaded an external HTML document using ajax:
$.ajax({)
URL: ('test.html').
data type: "html."
success: {function (data)}
SYM.$("rectangle").html (Data);
}
});
The above works fine.
I created a few anchor inside this HTML document:
< a id = "anchor1" > < / a >
< a id = "anchor2" > < / a >
< a id = "anchor3" > < / a >
When a trigger is reached in the composition of my Board, I would like to than the external HTML page loaded to jump or possibly scroll smoothly at these different anchor points.
Any suggestions?
Understood that if you put this piece of code at some point, you want the HTML code to access your anchor
Window.Location.href = "#anchor1";
-
External JSF pages to view the contents of the URL
Hello
Is it possible for a JSF page that uses the PanelPage component and the ADF controls to provide menus, etc to actually allow an HTML page (accessed via a URL to an external site/application) to be displayed somewhere in the JSF page?
For example, clicking on a menu item to an external HTML page causes the page currently displayed in a frame or similar in the JSF page?
I tried the FrameBorderLayout control and control Frame to try to integrate a picture to display such a page through the establishment of goals for a menu item, but that doesn't seem to work. At least not when in a PanelPage. It works within a basic JSP page.
I would have thought that it would be possible for an application of JSF to incorporate content from other sites/servers HTML as if a part of the application. Even if it meant the definition of 'wrapper' of some pages effectively sort the link in the JSF application within its rules of navigation.
Or am I missing something?
GeneHello
You can use an iFrame wrapped in a f: tag verbatim. This will make
Frank
-
Dreamweaver CS6 when connecting it to the external style sheet, it doesn't affect all the html page. It started to happen after upgrading to mac osx elcapitan.
have no idea how to solve this? now I write all my css stylesheet in the head section of my html page.
Thanks for help
Best regards
the problem has been resolved.
I forgot to write rel = "stylesheet", that was the problem.
-
How can I use an external HTML form with a file upload in my page of MUSE?
How can I use an external HTML form with a file upload in my page of MUSE? I know I can insert an external form, but how do I create a link to my email
Yes, in most cases. If it is not in your actual embed code, you will need to be added to the script that uses the code. There are literally hundreds of form manages the codes out there on the web, it would be impossible to tell you exactly where it needs to be added. Your best option is to use a third party such as JotForms or WooForms shape provider and use the third Muse Widgets for these services.
-
How to add a html page or page Web Flash SWF in as3?
Hi all
How to add a html page or page Web Flash SWF in as3?
Thank you
Omar
to a swf on the web, use navigateToURL. for a mobile swf file, use the htmlloader or stagewebview class.
-
ActionScript Toolbox is missing &; Adobe Flash not to publish the .html page
When I opened Adobe Flash I get this message
Analysis of XML errors *.
Line 0: the object = "[corresponding mx.video.FLVPlayback] ' attribute was not found on the version of script assist text = '.addEventListener (%)" "for an item
Analysis of XML errors *.
Line 0: the object = "[corresponding mx.screens.Form] ' attribute was not found on the version of script assist text = '.addEventListener (%)" "for an item
Line 0: the object = "[corresponding mx.screens.Slide] ' attribute was not found on the version of script assist text = '.addEventListener (%)" "for an item
and when I opened the action script all as I find is the following
and when I try to publish a Web page of .html off the flash get them all is a blank page when I change I can't find no code
This is the first time that this has happened and I have no idea why or how to fix it... Please if anyone has an idea to tell me
try to remove and then reinstall your flash program.
-
How can I Center the objects on the html page flash?
Hello
So thanks to a few other users on this forum, I understand how to resize my content to shape tween without breaking the Bank.
Also, I came across a way to center the flash on the scene objects. I use the "edit multiple images" button in the timeline, and then select all and reposition.
It's pretty easy.
However, when I do a preview publish and zoom in and zoom out (by command-/ +, on my Mac)... something doesn't seem quite right. My content do not stay in the Center and become more small, like most of the other sites, but rather it shrinks to the upper left corner. When I resize my window in fact, content does not meet the size of the screen and the Center itself, but instead gets cut! What I am doing wrong? Also miss me a scroll bar on the page!
Is there a real html editor in Flash?
Thank you very much!
Zoom is a moving target. Browser engines to implement in different ways. If you try to make a site 100% height-to-width SWF then technically a zoom is not a resizing and cannot trigger the resize event at all (it should not). But I don't want to speculate until I know if you try to first make a site SWF height and a width of 100%.
If this isn't the case, then CSS can also not responded to zoom in, for the same reasons. You use CSS to Center your SWF object?
No Flash is not an HTML editor built in but there are tons of free software that can highlight HTML syntax or even help with code completion, if you do not have Adobe Dreamweaver. Aptana is a very popular free HTML editor with code completion. Often, I use FlashDevelop just for code coloring and easy passage of a variety of types of codes (AS2, AS3, XML, HTML, etc.).
-
Hello
If you go to this address and scroll down to the bottom - you'll see that my Flash movie is displayed twice in the screen - stacked vertically above the other. Can you view the source to hit and tell me what I take on my HTML page to prevent him from repeating the code a second time. Thank you!
http://www.divaliciousapp.com/Flash/main.html
Andrew
Try
-
Loading a HTML or PHP page in flash
Hello
I would like someone to tell me if there is a way to load a html or php page into flash as a movieclip without actually navigating from the flash player (using getURL code). Basically, I wonder if there is a way to load a html file, just as we load movieclips and perform all of the functions of html page.
Thank you
Jean Yves
N ° Flash can only supports displaying html in textfields and only a very limited number of html tags (look to the top of the TextFields htmlText property). To view a html/php file is therefore not possible.
-
Keys Flash must reload on all html pages
Hi everyone, I continued to find a solution and had no luck. My site has 5 buttons flash (tabs) to take you to a new html page. Whenever you access a page the button seems to have to re - charge to create a "white flashing" inside the cell. The background of the fla file is black and I the table cell background set to black, hoping that would help, but nothing helped. I thought once that a swf file is loaded it will not have to re - load. Swf files are the same on all pages. Any help would be appreciated.
The site is
http://www.kineticcreativeco.com/
If you embed the same swf in each of your html pages, the SWF will load the cache of the user (if they have one). but you will still see a momentary flash of white.
You can prevent the Flash using iframes and load your swf file in one of the frames and to have the swf buttons directly changes to an another iframe (s).
-
Flash plays don't pitch on the html page after the model is changed
Hello
Can anyone help. If I change anything on a model, none of the files .swf on pages based on this template will work when you preview in the browser.
I use DW CS3.
Someone at - it ideas
Nice day
This problem can be considered a limitation to a certain point because Dreamweaver did not have the "auto-Update" capacity, although it wasn't really the best practice to include Flash content in a model DW.
There is a workaround solution. You may need to change the template (.dwt) himself and work in Code view.
- In Code view, use find and replace (Edition > find and replace) have so that it will be easier for you to find what you are looking for.
- In the find and Replace window, choose current Document as the value for find in, the Source Code and as a Research.
- In the search field, type--> 'src' (including apostrophes), and then click Next.
- Once you have found 'src', pay attention to the simple quoted text next to it. The value in single quotes is the path where the Flash file is saved. try to remove the ... / if you happen to see. (do if the Flash file is located in the same folder where the HTML page that uses it is registered)
- Use find and replace again, this time, try searching for 'movie' (including the single quotes). Again, you will see the text next to him who has the same value as what you are looking for before. Do the same thing, try to remove the ... /. (do if the Flash file is located in the same folder where the HTML page that uses it is registered)
Save the DW template file and try to view the pages in the browser.
I hope this helps.
Kind regards
Christine R.
Adobe in North America support
-
Incorporation of an HTML page in a Flash animation
I try to incorporate an HTML page in the center of a Flash movie and I was wondering if this is possible, and if so, what is the code to do. I want it as a small box in the middle of my SWF.You can add HTML in format txt to a TextField or TextArea component. This allows for simple things, href, b, u, i, p... But for all the HTML features, you may want to look into a DIV container that sits on top of your flash object using CSS styles.
-
Flash command to open the .html page
Hello - I have created a site with frames for a client (against my suggestion), but they still wanted. He's a senior and a backstory. Senior management has all the buttons of options in this 'home' "about us", etc..
When click on these, I need their associated .html pages to load in the lower frame. Senior is the backstory of indexTop.html is indexBottom.html.
What add you to the usual command (below) is not frames to achieve
on (release) {}
getURL ("thispage.html");
}
Thanks for any help,
EricHello
As far as I remember I did something similar a few years ago and the goal was to use what is called iframe.
Maybe this link will help you:
http://www.Kirupa.com/developer/Flash5/frames.htmAlthough it refers to Flash 5, the solution might work in the latest version of flash. He should also know that the executives are considered a little 'old' these days.
Greetings
Maybe you are looking for
-
How to connect a TOSHIBA 28W23 to the other PC?
I posted this on a number of sites different forum but no one really knows the answer.Thus, its what If I have an old TOSHIBA 28W23 - how it connectable to an other PC gx270s? If someone has any advice id love it.
-
How to include images in xtable?
Hello There is a fine example for use of a supplied with tiara xtable: "Dialog box with Extended User Table" which includes icons and text in some cells. Please can someone explain how to add the images was accomplished? I saw the code and even look
-
I just sign up but after adding 6 contacts I can't add other contacts. What should I do? original title: adding contacts
-
How to send email with an attachment in Groovy?
I have a user that is running remotely a groovy script to extract data from the Foglight Server. When it executes this script, it has the ability to create a data file on the Foglight Server. I would like to add a feature where this data file is s
-
In the photo gallery, how in the world to I move and rearrange the images in a folder?
I just need to move pictures to a folder in a different order they appear automatically. Sometimes they tell a better story when not in order 'original '. But I can't find ANYTHING that tells me how to do this. Does anyone know?