External SD card problem

Similar Questions

• HP Pavilion 500-314: big problems by adding an external video card

  You are looking for assistance.

  I recently bought a HP Pavilion 500-314.  Specifications are the following:

  http://support.HP.com/us-en/document/c04293928

  The unit includes the integrated graphics card Radeon R7 and comes with a 300w power supply

  I bought this unit in large part because it states explicitly that "supports PCI Express x 16 graphics cards".  I run a quad-monitor configuration for my work and traditionally did it this using a card ATI over-pants 2450.

  I tried now three different external graphics cards and can get any of them to work:

  First attempt was with a VisionTec Radeon HD 5570 (point #900345).  This card supports quad-monitor configuration and requires a minimum power of 250w.  When I installed the card, the HP Pavilion beeps several times a series of 4 or 5 (can't remember which) emits a beep, but refused to send an image to a video output (either on board or the new card).

  Next attempt was with an EVGA GeForce GT 610.  It's a Setup dual monitor and requires a minimum 300w power supply.  Got the same exact response as with the VisionTec (i.e. the series of beeps... computer would not start all monitors).

  So both of these cards (new), I basically gave up immediately that I couldn't in the BIOS (b/c wouldn't monitors) to see what was going on.  My understanding is that the series of 4-5 beeps usually means that there is a problem of graphics card, or the card that was added doesn't have enough power.  It's frustrating, because the HP Pavilion 500-314 a supposedly a 300w power supply, which is at least equal to the minimum required for each of these cards.

  At this point, I took out the ATI over-pants 2450 my old machine and tried.  This card at least has not caused the series of 4-5 beeps.  Windows has started.  However, once I log in, Windows tries to install the new (card over-pants) repeatedly, only then, the screen flashes and blinks and flashes.  Then I went into the BIOS.  The BIOS indicates that the system recognizes the card, and that the integrated video has been disabled.  However, there is always a signal coming out of the onboard video output (DVI), so it is not in fact actually disabled.  My feeling is that Windows is trying to control two separate video cards (edge + external), which is what causes the problems.  I can turn off the graphics card over-pants w/under Windows (in Safe Mode) and let the card installed, and things work fine.  However, as soon as I try and activate the card, I get endless cycle flashing monitors.

  I spent a few long sessions with HP technical support and they were useless.  They claim that this is not a problem of HP as the embedded video works fine.  I find this extremely frustrating response.  I think it is a matter of HP, because BIOS doesn't seem to be properly disable the onboard video.  Not to mention that the PC can't seem to properly interface with Windows compatible 8 PCI-E cards that claim explicitly require less energy than this unit has.

  I'm usually pretty computer savvy, but have reached my wits end on this one.  I'd appreciate any help anyone could provide.  I tried all kinds of combinations of variables (i.e. enabling integrated video, setting external card at the elementary level, etc.) through the BIOS, but also combinations of w/under Windows, disable integrated video, but nothing is working.

  900345 VisionTek Radeon HD 5570 1 GB DDR3 PCI Express 2.0 x 16

  Big_Dave,

  Thanks a lot for your quick response.

  The first time that I spoke with HP support, they had me disable secure boot.  Unfortunately my problems (i.e. the cards would not install correctly).  However, after reading the link you provided that I was inspired to try things one last time with a new beginning.  I uninstalled all drivers, removed all cards, re-engaged start-up secured, restarted, close, disabled secure boot, reinstalled the cards and rebooted.  And, this time, the system accepts the card GeForce GT 610.

  Difficult for me to express how grateful I am to you.  I spent two weeks and countless hours trying to get this corrected.  Just I found these forums earlier wish.

  WallMonkey02

• Qosmio G40-10 s: graphics card problem

  Hello.

  I have a Toshiba Qosmio G40 laptop 10s with a Nvidea 8600 M GT grafixs card. I was playing a game when it locked up and pasted what I would describe as flashing red/green 'Matrixy' search screen.

  He then a blue screen and trys to reeboot.
  He tries to start windows, but once again the top matrix. If it loads to the top, it is in 16 bit color with red dots all over the screen.

  I am sure that the GPU is fried... and I was wondering what I can do? It's been 5 months out of warranty now.

  I read on some forums that there have been a lot of problems with this Nvidea card... Is there anything I can do outside my warranty period with what there is a possibly faulty card in it from the beginning.

  It will cost a lot of money to get it repaired, but its too good a laptop to let go to waste.

  Any help is very appreciated.

  J

  Hello

  You also have these lines on an external monitor?
  If so, there seems to be a graphics card problem and it must be replaced.

  These overheating problems also occur if you use the nVidia display drivers directly. Toshiba drivers are pre-tested and don't overheat your system.

  But I think you need professional help. You should contact an authorized service provider and talk to the technicians. They will help you! :)

• Satellite A350D-10Y - failure of the external graphics card?

  Hello guys,.

  I have a toshiba Satellite A350D-10Y and I get some sounds of the sound system of the laptop, but a kind of Mermaid on the mother, accompanied by lights driver dvd, map emitte acoustics is two short beeps. I'm getting these two short beeps loops within a period of 5 seconds +-.

  I downloaded a video for you, to listen to the sound emitted by the MB, in the end you can hear better because you get less noise from the cpu fan:

  Feature of the motherboard: ATI external graphics card

  Things I've done:
  -Remove the battery and try to put on without it.
  -Switch of RAM on the slot a RAM
  -Clean cpu fan one its exhaust
  -Change is the motherboard on a new

  Now, the problem was taken up to, or is the processor or the external graphics card.

  I think that the problem of the graphics card, because if these was a problem of the processor, I'd get the audio system of the laptop beeps and not a buzzer next to the MB.

  Can anyone here help me?

  From my point of few it of not possible to say what s wrong with the laptop without running certain diagnostic tests and check the part.

  The often shorter and emits a beep when turning procedure appears due to the POST (power on self-test) failure.

  This essential POST routine determines the available memory real quantity and checks for the presence of required hardware components.
  In case one of the hardware components would be defective, the power on self test could not be transmitted correctly and the laptop would begin to create some beeps.

  If you are sure that the modules of memory so that the card mother isn't affected, then one of the pieces referred to as CPU / GPU can be the troublemaker.

• Need advice with card problem mother strange network card.

  I have a question that is probably some kind of motherboard or power supply problem.
  The card connects with 72.2 Mbit for my wireless router mbit and 100 with the Integrated NIC.
  
  Right now I have bars of 4 out of 5 on the scale of connection and the router just outside the door, but when I try the card against the bredbandskollen.se it never give me more then 4 Mbps download and upload of 16-20. For now, it's 1.6 Mbit download and 8 Mbits upload both with radio and network card.
  
  All other computers on the network will download speed normal 25-55, laptops and other Pavilion with GFX and solid power supply.
  
  I even went up to buy a wireless extension, which can also be used with the thread, but the problem still there never more then download 4-5 Mbps.
  
  I have warranty still, but I feel stupid about the problem because the card is connected with the right speed to the network.
  
  But the rate of download and upload is far away.  And I'm sure that they will conclude that it is connected to good speed when they try against a router, but that's all the download and upload that seem to simply broken. I reinstalled OS even tried other external wireless card but the problem persists.
  
  Would it be the 500-112 eo with a graphics card hogging the PSU, well she was offered with this card, but the motherboard is basically a small size for laptops?
  
  Anyone else having a similar problem with the 500-112eo Pavilion
  
  I should let him return for service, and what could cause this kind of strange problem?

  Hey well today about 2-3 months after the end of the one year warranty, I'll watch some hockey. When I look at computer it seems stop by itself. Strange, I think push button / stop and here a big bang when the flaky PSU finally had enough.
  
  I don't know what to say that it is a shame that HP sells undersized PSU:s in their computers. I knew from the start that there was something strange going on because of the bad connection Wifi, and how it seemed dependent on how many USB devices.
  
  I was smart enough to not send it to HP technicians, it probably saved me 100 euros. Because they would be claimed I had a faulthy complain and charged me. How can you prove there are issues of power.
  
  I'm just glad the monitor didn't die with the 500-112eo pavilion, because it looked like a shot and took the fuse 10amp in the room with her. Tried to move the HARD drive to the external firm to save a date he sounds like a sound signal in agony and refuse to spinn upward.
  
  So I guess that the PSU has HARD drive, mothercard, UC and memories with her on his farewell greatness.
  
  3 years and I would not protest, but 15 months HP should be ashamed of the technician putting this motherboard with this PSU and even more to sell the thing for 500 euros.
  
  Shame on you.

• After I installed el capitan my imac only recognizes my external sound card line! It's a focusrite 2i2

  After I installed el capitan my imac only recognizes my external sound card line! It's a focusrite 2i2

  Did you try a reset of the SCM and hope that the problem is solved?

  • Reset the management system (SCM) controller on your Mac - Apple Support

  What does the computer when started in safe mode?

  • Try safe mode if your Mac does not end commissioning - Apple Support

  You have a copy of backup clone of the previous OS X and its applications?

  This is usually a preventive measure to be still able to use the Mac

  an upgrade path does not work as expected, so you have alternative.

  Or you can return to the configuration already in place, in offline mode.

  In any case...

  Good luck & happy computing!

• Proper display of Chinese characters for songs in the external SD cards

  I can't get the Chinese characters good when I play songs with Chinese titles in my external SD card, but have no problem when you place them in the internal memory. Someone knows how to fix this?

  Bump. Anyone able to help me with this?

• external video card to fix the dv9500 screen

  I have a dv9500 which do not display. Many others have the same problem so it is probably a faulty GPU on the motherboard. I can work around the problem simply by setting an external video card?

  Hi again,

  PCI-E is the wireless card are connected to

  Recommend them way will go out to buy a converter kabel i thing $ 4, you can connect a mini sata and it convert standard sata. use the HARD drive to start on another laptop "If you do it this way, you don't need to convert kable" or in a desktop unit.

  BR

  Zincas

• Dell 7 venue does not detect the external SD card

  Hi team,

  Recently, I bought a Dell Tablet conference 7. It works very well. But there is a problem with external memory card slot, it is not able to detect the external memory card. I tried a lot of cards, all are working well in other devices, but it is not detected by my tablet. I tried my tablet as well as formatting SD card, but is still no use: (.) Please give me a solution...

  Kind regards

  Chaitanya

  Hello friend

  I also have the dell site 7 16 GB, but never fell on these issues, except when I tried to upgrade my sd card 16 GB class 10 (san disk) to 32 GB class 10 (kingston). When I put the 32 GB it does not detect, so I tried my 16GB and everything was back to normal.

  Maybe it's the inability of the dell site 7 in support of the higher upper memory class ability cards.

  My dell has also supported 32GB sandisk hybrid pendrive, this USB key with both ends... called dual player... key USB OTG of IE

• Can you get a sata adapter and replace it with a PCI Express so I can install a graphics card in the caddy hd for my laptop. Y at - it means to get an internal or external graphics card?

  Hey!

  I know that you can remove a dvd cart and replace it with a HD you can get a sata adapter and change a PCI express so I can install a graphics card in the caddy hd for my laptop. y at - it means to get an internal or external graphics card? I do not have a slot express pci laptop because a laptop is relatively new.
  
  Original title: laptop computer graphics card
  other cool mods I can do for my laptop. I've already upgraded to ssd and ram and processor.

  Hello

  I do not know such an adapter exists, but it's a hardware problem - I suggest you contact the manufacturer of your laptop with this issue, as well as questions about additional upgrades, you could do.

  These are all the hardware problems, and this site deals with software issues related to the Windows operating system. I'm sorry this isn't the answer you're looking for, but...

  Let me know if this helps you.

  Kind regards

  BearPup

• No sound after installing external sound card

  Original title: music and sound

  In drivers audio mother board getting a problem, so I insert an external sound card when I am installed drivers at this time there no noise was playing... So what I have to do?

  Hello

  1. What is the brand and model of the sound card?

  2. do you receive any error messages?

  I suggest to go through the steps from the link provided and check if it helps.

  Method 1:

  I suggest to go through the steps from the link provided and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Hope this helps and keep us posted.

• External graphics card?

  So I have an iMac late 2012, and the graphics card is a NVIDIA GeForce GTX 512 MB of 660M. Is it possible at this level, or even buy an external graphics card?

  Unfortunately, you can not put this iMac.If you want a more powerful graphics card, your only option is to buy a newer model, the new iMac or Mac pro both can be configured with the far superior graphics power

• How to get RSS feeds on the Journe Air 801 via the external memory card?

  I bought the Journe Air 801 digital photo frame and the manual says 'save the RSS feed of the album that you want to display in the .rss format and add to the external memory card', but he said not how you create this .rss file or copy it to your memory card. Anyone know how I can get a picasa rss in this format?

  I've successfully added a picasa feed manually in the framework but as picasa updates only the RSS if new galleries are added, not new photos, the photo feed is not updated on the frame so I would change the rss address.
  Thank you

  Hello palomaroma,

  I am also a user of Journe Air 801.
  To add RSS feeds, please install the software from the disc attached.
  Insert the sd card into the frame. Connect the frame to your computer.
  Start the Photo Frame Wizzard. Flow RSS Acount (s) is displayed.
  Now you can add RSS feed addresses.

  Best regards

• External Toshiba HDD problem. Something wrong with Windows I think.

  Toshiba ALU 3.5 "1.5 TB external HARD drive problem
  Hello!

  I'm having a problem with a new external HARD drive, I bought a couple of months.

  The HARD drive is recognized by Windows XP as a disk 3,5 '' HARD, but then he invites for drivers and never.
  They say drivers should be on the HARD drive itself, but my computer does not access the drive and never
  He attributes a letter or anything like that.

  The disc works on all the other computers I've tried with. My computer is since 2006, so maybe
  It is an age problem. I do not know.

  I drive came as FAT32 and I tried to format it in NTFS, but it does not work.

  I have completely updated the DELL drivers (bios, chipset, etc) and Microsoft (SP3/etc), then it cannot be a problem of drivers, it can?

  MORE DETAILS:

  Hey guys, it seems that the problem is more complicated. Here are two other discoveries that later, I did:

  I accidentally uninstalled a USB root hub, and all of my usb devices stopped working. I had to read on how to re - install, and most of the people, said that Windows should do it by itself. There can be no. So the next thing I did was uninstall all the USB controllers, on the assumption that Windows XP should reinstall automatically thereafter. Windows did not have this too!

  Although Windows has detected something, it does not recognize as a controller and have not installed the drivers for them. I had to manually tell Windows to look in C:/windows\system32\drivers and C:/Windows/c:\windows\servicepackfiles/i386 to each controller. It was tiring.

  I finally reinstalled all my usb controllers and my webcam works well again. But has not fixed the problem HARD drive.

  This is related somehow the problem of HARD drive, because I plugged my hard drive to a friend's computer and tried to put my computer on a USB key. Guess what, the USB is noticed by windows, but not recognized or installed in 'my computer '. The same story!

  I must tell you that in early December, I removed an old Go 700 Siemens drive of my system without "Safely uninstall" and it crashed HARD drive. Now, I realize that this accident probably missed my copy of windows, or my computer. I'm not sure of that... ?

  I believe that all these problems are related. It seems centered on the ability of Windows to detect large storage via USB devices. My webcam, for example, works very well.

  Well, I'm always working hard to solve this problem, but if you have any ideas, please let me know!

  All the best,
  M.

  It seems that you have already started the discussion on the same issue in another thread:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=198714

  Please don t create several threads on the same topic and follow the first thread to avoid misunderstandings!

• Toshiba Portege R500 - external display display problem

  At my work, we have a number of series laptops Toshiba Portege R500. All laptops are home in a Toshiba Slim Port Replicator II. Laptops are all running a version of Windows XP Professional with Service Pack 2 applied (and of course a few customization business).

  The problem is with the display on the external monitor. The laptop starts according to the normal and connects to the fine. The Fn + F5 key and so we can switch between the external LCD screen and the laptop monitor. We can also extend the desktop on the external monitor without problem.

  The problem is that when the disconnection of the laptop computer to the port replicator, when the laptop is brought back, the display of the external monitor does not display anything. The monitor receives a signal that we don't get errors about "cable disconnected" etc. By bike by Fn + F5, the monitor will go to sleep (as the adjustment is only to be on the laptop screen). By pressing Fn + F5 again, the monitor seems to wake up but there is no display on the external monitor.

  The only resolution we have found because so far, it's to stop & restart the laptop and the external screen works again. However detach and the problem occurs again.

  Thought this might be a driver problem or a problem of Toshiba Utilities, so have updated the drivers accordingly. The drivers installed by default are the Intel 945 Express 6.14.10.4837 driver version. I tried to update the drivers for the next version (using drivers from the Web from Toshiba site) and changes to the version of the driver 6.14.10.4631. I also tried the Intel driver version 14324.

  I also installed the Toshiba screen utilities and shortcut keys to see if this may have an effect, but unfortunately not. I also tried to change the BIOS settings for the display of 'Automatic Selection' to LCD + CRT RGB, and once again it has no effect. I also tried several configurations in the "display settings" does not.

  Is this just a design problem? Is anyway to fix that?

  Hello

  I Portege R500 in front of me with the same port replicator and 21 "Toshiba TFT display (connected to the DVI port on the Port Replicator).

  Please open "Toshiba Mobile Extension" utility (you can find it in Control Panel), then click on the second tab > change of display service.
  If please activate this service and choose your preferred display output.

  I tested it 10 minutes ago and it works perfectly.

  Good bye