How to use a mini disc?

Similar Questions

• How to use a recovery disc?

  Hello

  I just bought a Toshiba M300 yesterday and the first thing I did was create the recovery of 2 DVD disc. However, I don't know how to use it just in case I ever need.

  Whenever I put the disc in the drive it opens and I see a whole bunch of files and I don't know what they are. The recovery disk is supposed to act as a windows installation disk?

  How to use it?

  The previous forum used it well described. You must start your laptop and set up the CD/DVD as first boot device. When the facility starts just follow the on-screen menu.

  Please initialize with the number of DVD 1.

  If you have any other questions please post again.

• HP Pavilion dv6-6135dx Enterta: how to use the recovery discs

  I have a HP Pavilion dv6-6135dx Entertainment Notebook PC laptop with Windows 7 Home Premium 64-bit Service Pack 1. All Windows updates have been installed. I did a scan for sfc.exe. Empty folder of Pendingrenames then the scan has begun with this empty folder. Once the scan has been done there 2 156 files in the folder Pendingrenames put by sfc.exe.

  The CBS.log log shows more than 2500 pages of problems reported by sfc.exe/scannow. It's huge to be listed here. Most seem to be related to the 'stores' relative to the updates of Windows that have been downloaded in the past months. Looks like there are about 6 500 system files corrupted reported and not of miracle.  I think that "WinDoze" people don't like me not with nearly 90% of the corrupt files were caused by the downloaded Windows updates.

  The newspaper says in 95% of the problems, he was unable to remedy. I don't have a Windows 7 installation DVD because my OS is an OEM installation so I can't perform a "repair Windows". My only recourse seems to use my HP recovery disks. There are 3 DVD, numbers 1 and 2 seems to be the recovery of the DVD and number 3 seems to be a kind of supplement, possibly having to with Windows 7 Home Premium 64-bit Service Pack 1.  Don't know what the 3rd DVD or how to use it. Any suggestions what it is and how to install it would be greatly appreciated.

  Someone at - it suggestions as what I can do, in addition to a full recovery. My restore points do not go back too far that when these Windows updates have been downloaded and installed.

  Is there a list of the Windows updates & Windows somewhere that should not be loaded with this operating system? I plan to install all updates "critical", "largest". I might just give up those optional. I downloaded and tried the update Rediness tool (SURT) system which was a complete exercise in futility. Just made me more the corrupted system files.

  Would appreciate any help that I can use with this. I look forward to a full recovery, since it will take me several hours to reinstall all my programs.

  Skip

  Your system is a State that you have no choice.

• How to use a blank disc DVD-R as a USB flash drive?

  Hi all! I'm running Mac OS X 10.9.5 on my MacBook Pro and I was wondering how I could use a blank DVD-R disc as a form of rewriting for documents, music, spreadsheets, etc. ? My mac Let's burn me to the disc, but I can't rewrite to it after that. Help, please!

  They don't work that way. Rewritable means simply you can erase the disc and use it again. You can't write it during normal use of the disk. This, to a USB flash drive.

  To be same rewritable, you can use a DVD - RW, DVD - r not it is not rewritable. You can look for third-party software that allow you to use the drive as a flash drive, but I am not sure that these programs exist. Not much need for it.

• 110 - 000z: how to use the restore disc I burned

  I burned 4 discs of recovery from my pc. Now, I need to use. Could someone show me how to start them on my pc. what I have to do.

  Here's the ths bases of performing a HP system recovery

  http://support.HP.com/GB-en/document/c03489643

• How to use the Windows 7 recovery discs!

  I have a pavilion DV6-1245DX and sent in for repair with windows 7 installed on it (the free upgrade).  I sent the recovery with the computer disks and it came with VISTA (THANKS!). I have no idea of friggin how to use the recovery discs to recover windows 7. Help, please!

  When you've got a free upgrade to Windows 7 would have received you a HP disk to use.

• How to use the SunDisc mini adapter in Windows 8?

  * Original title: SunDisc min adaper

  I have HP laptop. I also have windows 8. I don't know how to use this mini adapter SunDisc?  I don't have a clue as to where to insert on my laptop or if I need something else to use.  I'm not what other information you need to help me.  I also do not know if this SD adapter contains photos, videos, music... etc. Thank you

  Hi Sheryl

  I guess it is an adapter to allow their reading of a micro sd to a phone card or a Tablet is it?

  If this is the case, you should be able to access the contents of the card via the usb cable that connects the device to your pc without having to use a card adapter...

  A quick websearch brought Sandisk (rather than sundisc) - so could you clarify?

  Thank you - R

• I'm not clear how to use the recovery CD

  I added all the space using my HDD is it comes about 12 GB, I have 27.9 GB of disk space, but my drive has only 1.80 left disk space. I made clear to solve this problem. Basket is empty, I ran disk cleanup.

  A computer expert suggested that Windows might have become confused and cannot recognize what place I save, it might be because I ran a program called Cyberscrub often. His solution is to reload Windows XP home. My laptop came with recovery discs, everything else is already loaded. I have so much I don't want to lose on my laptop. If I use the recovery discs, I will lose everything on my computer, am I better off buying Windows XP home and re-load, in which case I will not lose my job?

  Also I am not clear how to use the recovery discs, I can't find instructions on what you are doing.
  The only person who could help me went to travel and not reachable.
  Any help greatly appreciated
  Lorraine Hart

  It of a very simple to recover the laptop.
  Just boot from the recovery CD and follow the instructions on-screen ;)

  I put t know what version recovery CD you have, but the older one provides the standard and expert mode. In expert mode, you can choose you partition where the OS is to be installed.
  So in this case only the selected partition will be formatted!

  But have you checked the size of the HARD disk in disk management?
  Simply click on the my icon my computer and choose manage.

  Of course, you could remove the internal HARD disk and it could connect to the external USB HDD controller. Then, connect the drive HARD to the second PC and you record data on another HARD drive.

• My use of the disc skipped dramatically. How can I see the use of the disc by folder or subfolder to see what happened?

  My use of the disc skipped dramatically.  How can I see the use of the disc by folder or subfolder to see what happened?

  Probably - system restore
  System Restore: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/517d3b8e-3379-46C1-B479-05b30d6fb3f01033.mspx
  TaurArian [MVP] 2005-2010 - Update Services

• How can I clean installed Windows 7 Ultimate 64-bit using a upgrade disc?

  Originally, I had a Windows Vista 64 - bit o/s office.

  I decided to upgrade to Windows 7 Ultimate 64-bit o/s

  The first time I ran this 'upgrade', I made the mistake of selecting the option UPGRADE instead of using the CUSTOM option.

  For some time since I've done the 'upgrade' I got BSOD problems including caused by video and WebCam drivers.

  This is why last week, I took the plunge and decided to reinstall Windows 7 Ultimate 64-bit using my UPGRADE disc (the disc is not FULL version)

  I selected CUSTOM

  I saw, I had two partitions:

  Disk 0 Partition 1: Win_RE

  Disk 0 Partition 2: CDrive (c :))

  I couldn't find an option to delete my partitions and perform a new installation.

  I ran this and finished installing fine but did not format my drive and it change named my windows to windows.old. Things seem to be ok on my PC, now that I've done this, and I don't take BSoD right now.

  However, I was told that I should be able to achieve a COMPLETE clean install delete partitions to force the OS to reformat and recreate the C: partition.

  The menu:

  Discount

  Load the driver (I have no idea what is this option)

  To make changes to partitions, restart Windows from the installation disc

  I could not click on an option to delete/reformat my partitions and thus abandoned the process.

  I then let the disc (forgive my ignorance) and restarted the PC. I dropped in the BIOS and set to boot from the DVD drive.

  This did not do anything to bring up the WINDOWS SETUP option. It would simply start Windows after that, I suspect, he couldn't find the exe file to start.

  Thus, while everything seems to work fine, I'm frustrated that I can't run a clean full install like what I'm doing doesn't work.

  If someone is able to give me advice on how I can get the installation routine to show this option which would be more useful.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I have Dreamweaver CS6 but want to update for cc, how ever I did mine and I sign in and upward at the site web adobe and want to use css Designer because with my courses, I do and they use CC. How can I get upgrade with refund f

  I have Dreamweaver CS6 but want to update for cc, how ever I did mine and I sign in and upward at the site web adobe and want to use css Designer because with my courses, I do and they use CC. How can I get the upgrade with this new refund. Thank you

  There is no way to update the version of perpetual license / DWCS6 drive to the creative cloud, they are two completely separate programs. There used to be a discount for the Creative Suite owners switch to CC, but that ship has sailed.

  If you want to the CSS designer, you will need a subscription here: pricing and membership creative cloud plans | Adobe Creative Cloud

• How to use the rescue and recovery and product recovery discs?

  Hello world

  I just recently became a new owner of a T61 and really enjoy. I did have a chance yet to test the hotline of lenovo, as I've not yet screwed anything up if badly needing their help. I tried a factory clean reinstall from the service partition and it worked fine. I would like to know, how one uses it the rescue and the recovery boot disk and the recovery disks of the product I created myself? From my previous experience with Dell and HP, I didn't insert the one and restart the computer, and the rest followed. But the ThinkPads, if I ever wanted to bring a State own factory using these disks, can I use with rescue and recovery first, followed by the recovery of product? I'm curious, what is the difference between the two?

  art140 wrote:

  From my previous experience with Dell and HP, I didn't insert the one and restart the computer, and the rest followed. But the ThinkPads, if I ever wanted to bring a State own factory using these disks, can I use with rescue and recovery first, followed by the recovery of product? I'm curious, what is the difference between the two?

  1. Place the rescue and recovery disc in the drive, and then restart.  This disc contains the same program that you used when you restored your system from the service partition.  Once the program is loaded, you will see the same screen with the same options as before.
  2. Choose to restore your system as you did with the service partition.  You will not see an option to do a custom restore.  When the program is run from the disk, it automatically performs a full restore.
  3. The program will rebuild the service partition and copy the program files on him.  When you are prompted, insert the product recovery disks.  The compressed system and application files contained on these discs will be copied to the new service partition.  Once the copy process is completed, your system will be restored from the service partition.
  4. After restoration, you will be able to make a new set of recovery discs if you wish.  You will also be able to do a restore custom through the service partition.

  Don

• just bought SCAN SNAP supplied with disc of Acrobat, but only for PC, I use a MAC, the serial number of the disk, how to use and get for MAC

  just bought SCAN SNAP supplied with disc of Acrobat, but only for PC, I use a MAC, the serial number of the disk, how to use and get for MAC

  Standard Acrobat's window only; Acrobat pro for mac

• Satellite A300 - how to use the recovery with external DVD drive disc?

  Hello

  I bought a toshiba Satellite A300 - 15 d

  FTM the tsscorp drive that is installed in the camera no longer works (does not detect any type of media what so ever). ) need to recover the laptop, so I used a USB DVD drive to boot from the restore disc, but after that the charges of recovery console it says waiting for media in the f: drive, which is the tsscorp drive although I used an external drive to load the disc.

  What files should I edit to make it to load from the drive externally and if this isn't the solution, what do I do?

  Thanks in advance

  Hey Buddy,

  Unfortunately I think that it of not possible to use the recovery with external CD/DVD drive disc. Therefore, place the internal for use the recovery disc.
  You can get a new drive to an authorized service provider.

  But if the original OS from Toshiba is installed, you can use the function of disk recovery HARD reinstall Windows as well. Go to the advanced boot menu (F8) and select Repair my computer :)

• There is a mini disc stuck in my macbook, how to get out?

  My Toddler put a mini disc into the cd/dvd slot and now it is stuck. I tried pressing the eject button, but nothing happens. I also tried to insert a normal disc to halfway and then hit eject, but it still doesn't work. What can I do to fix this?

  It was released by tilting the macbook on the side and shaking gently.