External "URL" setting breaks internal access...

Similar Questions

• Async AS2 in B2B of Oracle 11 g and proxy reversed - how to indicate the external URL of DND

  Hello

  We have a SYNCHRONIZATION connections of AS2 work via proxy leaving and entering proxy reverse. No problem. But in AS2 header of our messages when ASYNC DND is enabled B2B 11 G sends our internal hostname (not accessible from the internet) as URL of return of DND. Thus, our partners cannot return the MDN

  How can I replace it? In 10g I could set the channels on host partner and use them in the conventions, but now they are only 'internal' type and cannot by basic HTTP.

  (Suggestions appreciated - I searched the documentation, forums and Oracle Support better than I could, but I was unable to find something useful)

  Thanks in advance

  Kamil

  Okay, I think I found the answer.

  The only way to do this correctly is to put the URL of the proxy to the Recepit delivery on the chanel TP Option. This means that in the future, any changes made to the external URL will require that update us all affected chanel TP configurations.

  Kind regards

  Kamil

• External URLs

  Hello!

  If a user located in the Inet uses Horizon customer via PCoIP to get his remote desktop, what URL should I put Enabled and I can disable?

  External URL of the secure tunnel, PCoIP external URL and external URL Blast

  The external URL is used for secondary communications made between the client and the server.  It is also used as a means of transport secure when you use RDP as display protocol.

  The secure gateway PCoIP is generally used when you have a secure server deployed, or have a desire to all customer traffic through several IP addresses of the funnel.  With the gateway secure enabled PCoIP, PCoIP traffic between the Agent of the view and the customer view is all be channeled through the Security Server or the connection to the server.  Without this setting is enabled, clients and agents will communicate with one another.  The first is generally used in an environment with a firewall, while the latest is most commonly used for internal traffic only.

• Session timeout navigate to an external URL

  Hello

  I want to access the external URL when the page expires pursuant to the ADF, how do I do this?

  Jdev 11.1.1.6.0

  Thank you

  Peyrot

  Hello

  See this post: http://fortunefusionminds.blogspot.com.es/2014/04/how-to-redirect-to-custom-page-whenever.html

  Kind regards

  Ruben.

• Redirect to an external URL form

  Hi I have tried to ask support and tried to look in the documentation but couldn't find an answer.

  What I try to do is to redirect a successful presentation of a web form of Business Catalyst to an external URL.

  " I tried to join & ID =" http://www.example.com "action of shapes attribute, but it didn't work (I guess this only works for the pages of the site directory). "

  I don't have to or redirect the page of confirmation, because I have a lot of forms of landing page and forms on other pages that use it. The screen, I'm redirecting is located on a page.

  Anyone have any ideas?

  < form name = "catwebformform80515" method = "post" onsubmit = "return checkWholeForm80515 (this)" enctype = "multipart/form-data" action = "/ FormProcessv2.aspx?" WebFormID = 116145 & amp; OID = {module_oid} & amp; OTYPE = {module_otype} & amp; EID = {module_eid} & amp; CID = {module_cid} & ID =https://example-url.com/demo' > .

  ...

  < / make >

  You cannot link to an external URL like this, there must be internal. This page must also exist. You can also not 301 redirection to an external site. You need to do with javascript.

  OR you do an ajax form submission and redirect at the end.

• Display external URLS and CERT

  Hello

  Looking just for clarification on some things. This isn't how my environment is set up today, but that's how I intend to make

  Display the connection servers:

  viewconn1.mydomain.com - 192.168.200.10

  viewconn2.mydomain.com (replica) - 192.168.200.20

  See Security servers:

  viewsec1.mydomain.com (combined with viewconn1) - 192.168.100.10

  viewsec2.mydomain.com (combined with viewconn2) - 192.168.100.20

  All these servers have IP addresses in the 192.168.x.x range. All servers in my DMZ servers are also in this range and I use a firewall to manage any type of NAT.

  I intend to load balance all these servers for my internal users, I would like that all reviews / zero clients to connect through the view.mydomain.com address. Really, I wish that my internal users and external (internet) connect via view.mydomain.com

  When it comes to certificates, what is the best way to handle this. I'll need a 3rd party CA for my security servers, this way my users who connect with their personal computers do not receive any certificate warnings. Can I purchase a SSL certificate for view.mydomain.com and install it on all 4 servers?

  As for the security gateway PCoIP, the external IPs can we internal dmz IP such as 192.168.100.10, because I have my NAT firewall, or must it be the public address provided by my ISP?

  I went through the documentation already, but he is still not 100% clear to me.

  Thank you

  Mike

  According to what external certification authority you choose, you have 3 Options. (Not all are supported by each CA, your CA representative may help).

  1. A certificate of wildcart, *. mycompany.com. so you can use it on all the components of the view and you're done. Two issues can arrise:
     1. If you address your servers via IP or a name like "view.local.domain"-> cert warning
     2. Some clients may behave erratically or generate warnings when they see wildcard certificates. In an environment of view I never had those problems (I use wildcard Certs issued by Rapidssl and Wiew software Clients, hardware PCoIP Clients and browsers in their latest Version.)
  2. Some CA offers the ability to add "alternative names" to your cert, so you get 1 (!) "Certificate which fits for"view.mycorp.com"as well as regards let them say ' View - 01.mycorp.com and ' view - 2.domain.local", sometimes even the IP addresses are allowed. The good thing: you don't have ' t get a certificate warning, even if bypass you the loadbalancer (view.mycorp.com) and speak directly to a server connection (see - 01.mycorp.com)
     1. Note that it should work in theory, I did it, but never with a view. Not sure if the display server like it.
  3. As discussed in previous discussions, you can obtain a certificate of "view.mycorp.com" and he slam to all servers within the party. I forge avoid this, because:
     1. As soon as you communicate directly with a connection to the server, you get a cert warning, because the name does not match cert. It is not so dramatic for users, but even more for the components of VMWare as talko to each other (maybe it's one Orchestrator, vCops or other)

  Regarding the Configuration of your PCoIP gateway: you must configure the public IP (what is known in the world) in the settings of the server, without worrying if the server that has the intellectual property or is behind a NAT device that transmits the requests.

• How can I submit form data to an external url after a purchase?

  I use BC as part of a site that sells certificates of people will buy ecommerce.  There's a developer outside creating PDF certificates with their info and a custom code.  Anyone know how I can submit form data to an external url purchase?

  Two ways.

  To move cross-site restrictions:

  -In javascript dynamically create an iframe hidden, copy the data from the form in this iframe, set on the iframe onload event, submit the form (in the iframe), once the iframe loaded, submit the form BC as usual. Google there should be examples out there.

  -Using JSONP to do the same thing, but this will use GET so that your data will not be encrypted at all (maybe it's not a concern for you and you will need to check if the outside developer making the PDF can handle this response).

• How to add an external url link to a navagation button in Dreamweaver Cs5.5

  How or can I add an external url link to a navagation button in Dreamweaver Cs5.5. If I try the link/properties it says that the link is an html element and not a css...

  Thank you

  Binding is done in HTML, not CSS (with the exception of a link to a background picture)

  So, if your navigation is a list, you should have the following in your HTML code:

  Here, in the example above, I use the

• link to the external URL of the swf online

  Is it possible to post a link to an external URL of your flash website without going through the flashplayer prompt you to change your settings and allow access to this page? (this applies only to SWF files read through a browser)
  the only way around this that I found is not very helpful - must be an xml file that is small on the host server where the page you want to link to. I seriously doubt each site you want to link to you will put an xml on the server host file just so you can access their page. the code in the xml file indicates right flashplayer the website you are trying to access is safe. It is called crossdomain.xml
  someone at - it a response?
  Thank you!

  No, it isn't. getURL() causes no security problem, except if you try to open the local html and access (try to) something on the internet.

  unless your "flash site" is the local computer poses no security problem. If your computer is a Web server, you simply define the security settings for your local file and give it permission to access the internet.

• Try to set up remote access for Foscam babyphone. Windows Vista & I have A Westell router. I can't understand this helps :(

  Im trying to set up remote access for a babyphone Foscam (Fl8918W). I worked on it all day.  No matter what I do, I can't get the camera to get on my computer (or iPhone).

  Here's some of what I've done so far...

  -Camera configuration and find the IP address

  -Type the IP address of the camera in the browser and camera open (it uses Active X)

  -Change Port number of the camera (Guide suggested using 2000)

  -Now you can type the IP address and the port number in the browser and access camera

  -Complete the Port forwarding on the router (I did this several times using each option that I could understand. Finally, I think that I did it correctly because it looked like he turned on - but I don't really know.  "I couldn't get any real information on the Port Forwarding for my Westell A90-750045-07).

  -Access using the public IP address.  It did not work at all. I had to find my IP address for my computer/network (which I did) then open my browser and type the IP address followed by: 2000 (new port). The camera was then to open in the browser, but it did not work.

  -IP service.  Management said that the device could be available over the internet using a public IP address. He told me to go on No - IP and sign up for the free service.  After the signing, I was directed to create a host name.  I managed to do it.

  -L' direct access of the ACTIVE camera address No - IP.  I was directed to type my address No - IP (hostname) in my browser, followed by: and the Port number (: 2000). He said that I should then able to access my camera from a computer or mobile app on the Internet using this address.  This does not at all.

  -J' tried to make it work with my iPhone. I was directed to download and install an application called Live Cams Pro - by Eggman Technologies.  He then ordered me to add a camera. I chose the correct model of Foscam, entered the IP address (or my No - IP address) WITHOUT port number, then on another line, I entered the Port number, entered my user name and password and click Save.  Nothing ever came and finally the connection times out.

  I did all the change of option combinations in each stage as many times I could think.  All I could change in these steps, I tried all the options I could.  I can't make it work.

  I'm so frustrated.  I'm not a computer person.  I managed to do a lot of things by reading the instructions carefully.  I read the Foscam Installation Guide and the next babyphones instruction manual (I bought the camera from the company).  Nothing I've tried works.

  Any direction would be greatly appreciated.

  Thank you!

  Did you put the IP cameras as a destination / local IP?
  If this is not the case, do.

  Aside from that, the best would be to contact the manufacturer of your router for assistance with how to correctly forward ports to your camera.

• Windows 7 professional XP Mode - does not recognize external USB drives or internal DVD drive

  I recently bought a new Toshiba laptop and ordered computer configured with Windows 7 Professional that I can use the XP mode for some older programs.  Virtual Mode and XP mode work well, but the computer will not recognize the USB external storage drives or internal DVD player.  This prevent me to save and transfer any file I'm working on in XP mode.  Anyone know what I have to do to make the computer recognize USB drives and DVD drive internal when I'm running in XP mode?  Thank you!!

  Hello David,.

  Thanks for the quick response.

  Yes, it's a Microsoft Product, but there specific departments assigned to the people where they have more expertise, this is the reason why we have asked you to post your query in the TechNet where this issue is very discussed.

  Hope this information helps.

• Session has expired when you browse a page with a frame inserted with source as an external URL.

  Hi, I need help.

  I have a portal webcenter application. I have a page that has an inline frame and the source is an external URL. After I login, I could go to the mentioned page but when I navigate on and click on another page, I get the message "due to inactivity, your session has expired and is no longer active. Click OK to reload the page. Then I'll be logged out of my session.

  Hello.

  Like you are in the framework of the portal you must configure the weblogic.xml to install Cookie-path to something like:

  /yourportalcontextrootl

  It will be used to store JSESSIONID perhaps ongoing overrided by the iframe to another application you are using (maybe you have two requests in writing the cookie JSESSIONID "/").

  Kind regards.

• CustomerID refers to the external url

  Hello I have a question about external links.

  I have a table with customer ID and another external website with a database of my company portal.

  The url of the portal of database structure works this way https://...default.aspx?CustID=12345

  Now, I want to link my Apex client ID to the url.

  If I click CustID = 10001 to apex then the url to refer to https://...default.aspx/?CustID=1001

  and if I click in my report on CustID = 21000 url refer to https://...default.aspx/?CustID=21000 etc.

  How can I achieve?

  Thanks for any solution.

  BTW:

  I use in my business, the old version 3.2 Apex that is installed on a server, but I think that

  to refer to external URLS, it doesn't matter which version.

  DB2000

  You don't mention how you present the link to the user.

  If there is a link in a report, you can use the column values in the url of the link.

  the url of the link would then look like

  https://...default.aspx/?CustID=#CUSTID#

  Where CUSTID is the alias of column supporting the id of the customer.

  If there is a link in a text do allows to store the client id and reference it as of a page element

  https://...Default.aspx/?CustID=&PXX_CUSTID.

  Where PXX_CUSTID is the name of the element that contains the customer id.

  Nicolette

• External URL in the workspace

  Hello
  
  I searched the forum but it could not find anywhere, is it possible to create a link to an external URL in the home page of the workspace. Say, I wanted to have a link to the website of our company or something like that, how can I do for adding that in there so everyone would see it?
  
  
  Thank you
  Jason
  
  Sorry, couple of quick edits. We are HFM 11.1.2.1.103 and in the Pages folder of shared workspace (under explores) that I had imported the URL I wanted to use it, but it does not appear on the workspace anywhere.
  
  Published by: JDN on 25 April 2013 13:33

  Hi Jason, you can do exactly that. In Explorer, right click on the URL that you imported, and then select change permissions. Bring the GLOBAL group in the right pane. There is a column which says 'Favorites '. Change it to "Pushed". Then check the box 'Push this point for some users, groups and roles' at the bottom of the screen.

• How can we dynamically open an external URl of the page of the OFA

  Hi team
  Hello, how can we dynamically open an external URl of the page of the OFA
  For example: my datas table DB are like that

  Employee no       Url
  1     https://www.google.co.in/
  2     https://www.facebook.com/
  3     https://www.yahoomail.com/

  When I don't ask used no 1 of my Search Page
  In the result of my search page table, I get
  1 https://www.google.co.in/
  NOTE: Here item URL is type bean link when I click on the link it should open google page in separate browser
  At the same time, when I question used no 2 which is shown below, then it should open facebook page in a separate browser.
  2 https://www.facebook.com/
  
  When I try this
  Destination URI - https://www.google.co.in/
  It opens no separate browser, but for employees don't I question as open 1,2,3 only the same page of google in the separate browser for everyone, it is static, I want to dynamically open the URL depend on my employee to query no. If I query emp No 2 it must open facebook page this is my requirement. How can I pass the URL as a parameter?
  
  Please share your knowledge and experience and your advice my on this issue
  How can I complete my task
  I hope that my requirement is clear, if not please let me know I explained more anyway :)
  
  Is it Possible to achieve this OAF Page
  Thank you for all your suggestions on this
  Thanks in advance
  
  A.T. :)

  .findIndexedChildRecursive ("ResultTable");

  Here, you should have the exact itrm link id and not the region containing the lino

  Would it be more likely ImagePath I think ResultTable corresponds to the id of the table of search results