Session timeout navigate to an external URL

Similar Questions

• Navigate to the external URL

  Hi all
  
  We have a detailed report where we will have detailed information of any cause and according to this report, we want to provide a link to our application.
  We have a report that contains columns like below.
  
  PLV reason Type emission issues no.
  A TOIssue1 of raison1 123
  B raison2 issue 2 234
  
  Now this report if we click on Question No. column should it takes us in the application. To do this, we added test custom in Question No. as below.
  
  * @[html] "< a href ="http://localhsot/object/"Type of show" / "" @"" target = "_blank" > "" @""< /a >. "
  
  where we expect the format url as * http://localhost/object/TOIssue1/123 *.
  
  and another problem is that if all of the values of reason a space url will not work.
  
  Kind regards
  Floquet

  "Why @html '" "@" "" "in the data format tab?

  Put HTML data format and write with quotas unique code in the editor of the column, if the bound column is number can cast.

  There is a problem with the analysis of space with URL value. Only the first word is parsed. I try a few methods of replacement, but without success.

  Concerning
  Goran
  http://108obiee.blogspot.com

• Session has expired when you browse a page with a frame inserted with source as an external URL.

  Hi, I need help.

  I have a portal webcenter application. I have a page that has an inline frame and the source is an external URL. After I login, I could go to the mentioned page but when I navigate on and click on another page, I get the message "due to inactivity, your session has expired and is no longer active. Click OK to reload the page. Then I'll be logged out of my session.

  Hello.

  Like you are in the framework of the portal you must configure the weblogic.xml to install Cookie-path to something like:

  /yourportalcontextrootl

  It will be used to store JSESSIONID perhaps ongoing overrided by the iframe to another application you are using (maybe you have two requests in writing the cookie JSESSIONID "/").

  Kind regards.

• Error handling/Session Timeout with APEX &amp; Ajax / Javascript

  In our project, we have the problem, what a session timeout can occur when the user stays on the same page and a jQuery/JavaScript/ajax process is used.
  
  If a request for action called in a popup ajax without an active session process the HTML for the login page is the user.
  
  How a management capable errors that no html will be displayed in the pop-up window?
  
  
  Further there are external JavaScript files which need to read the content of elements of the application.
  Is there an elegant/small/reusable way to get the value of the elements of the application?
  The & APP_ID. The syntax does not work in external JS files.

  Hi Oliver

  Personally, I think that if you get a timeout that the popup is closed and your parent page is redirected to the login page. By using a cheque as a reminder of the success/error during an AJAX call you inspect the xhr.responseText to work if you have received a timeout would be recommendation and if found close the context menu, and then assign him the login page window.location.

  However for AJAX calls not you will face a problem. In this case, you need a script in your login page that checks the window.opener and if so close the popup and sets the window.location opener to your login page. for example, I would like to add something like this to your header login page or login page model header.

  Note: only tested on FF. In addition, the javascript above is just a very basic example and will close all popup which displays the login page and reload the parent with the login page. It can lead to an undesirable feature for web pages open your app in a popup, since it will be automatically shut down and recharge the calling page that could frustrate people. In this case, you will need to add more conditional logic in the script to check the current window.opener.location to check if the URL is for your application and then perform the close and reload action.

  Of course, there are other ways to manage what is happening it is just an option I would like to Explorer.

  If you need to read the values of the elements of application not page elements in javascript, you need to add a script to your page footer that defines these example

  To get the value of an element of the application:

  apex.appItem('MY_APP_ITEM1');
  

  In the script above the request item values are secure prevent changes since they are accessible through the service such that they are defined as local variables to the breast. The only issue you will face access the value of an element of application which is been updated in session state by a process of AJAX. With the help of local values printed on the page rendered as it can get out of sync. If your item applciation values include line breaks or double quotes then you must escape them, if you need this support use a region of page PLSQL and escape the output after JSON script item values.

  In the example I use apex Namespace, some people may argue it's a bad habit, but for me, I like to keep everything apex linked together. He has pro of / jerks to the argument, if the decision is yours.

  Note: the reason to add the script to your footer must ensure that the values of point of application have been in session state, before they are issued.

  The previous post of VC is the right way to access the elements of the entry page and DOM values.

  See you soon
  Matt

• Configure the timeout and session timeout in a group policy.

  I want a L2L tunnel to establish a period of time, this tunnel is established in a PIX 515E.

  Then I had seen that we must configure the idle time in group policy, but I have no ' t know the difference between the idle timeout setting and the session timeout.

  Anyone know what is the difference between this two command line.

  Thank you

  Hello

  Session-Timeout: at the end of this time, the security apparatus terminates the connection.

  Idle-timeout: If there is no communication on the connection activity in this period, the security apparatus terminates the connection.

  Please see the below URL for more details.

  http://www.Cisco.com/en/us/docs/security/ASA/asa70/command/reference/TZ.html#wp1281883

  http://www.Cisco.com/en/us/docs/security/ASA/asa70/configuration/guide/vpngrp.html

  Kind regards

  Arul

  * Rate pls if it helps *.

• POSSIBLE Edge Gateway - session timeout

  Hello

  I tried to find technical documentation on session time-outs in the POSSIBLE gateways of edge 5.5, but I only managed to find a covering memo saying that it is possible to change the global TCP session timeout.

  Can someone give me with the timeout´s that is defined in an edge Gateway 5.5 and 5.6, as the underside of the parameters from one edge of the NSX

  {
  'firewall': {}

  'globalConfig': {}
  'ipGenericTimeout': 120,.

  "icmp6Timeout": 10.

  'tcpPickOngoingConnections': false,

  'tcpAllowOutOfWindowPackets': false,

  'tcpTimeoutEstablished': 3600,.

  'disableFirewall': false,

  'dropInvalidTraffic': true,

  'tcpTimeoutClose': 30,.

  "icmpTimeout": 10.
  "udpTimeout": 60.
  'tcpTimeoutOpen': 30,.

  'tcpSendResetForClosedVsePorts': true,

  'logInvalidTraffic': false

  },
  

  I received this response from VMware

  VMware KB: Method to query and configure the timeout using Representational State Transfer (REST) API

  Copy/paste of the KB:

  Here are the default settings which can be changed using that api rest calls, however these settings will be reset when the edge is redeployed.

  Default settings

  Protocol / State

  (3.0)

  "Idle time-out" (seconds)

  (version 4.0)

  Timeout (in seconds)

  TCP Open

  (SYN-SENT, the SYN-RCVD state)

  30

  30

  TCP established

  3600

  3600

  TCP close (FIN_WAIT of America, TIME-WAIT)

  20

  30

  UDP

  30

  60

  ICMP/ICMPv6

  10

  10

  All other protocols

  120

  120

  [edit] Configuration - Supported Versions

  Release version

  The API version

  Persistence of configuration through "redeploy" / upgrade ".

  <=>

  Not supported

  --

  5.1.3 (Spock, minor update)

  API/3.0

  NO.

  5.5.1

  API/3.0

  NO.

  NSX 6.0

  API/4.0

  Yes

  [edit] Query/Configuration

  The timeout of the connection parameters can be queried and configurable REST API during execution.

  [edit] API/3.0

  Query - timeouts of idle connection:

  Query operation is supported in this version.

  -Set the idle connection timeouts:

  In the API 3.0, idle connection timeouts can be configured thorugh "systemcontrol" section. The following parameters are optional.

  The settings are configured in any operation to "Redeploy" the Manager of vShield are persisted.

  URL: /api/3.0/edges/{edgeId}/systemcontrol/config

  Method: PUT

  Representation of entry:

  sysctl.net.Netfilter.nf_conntrack_tcp_timeout_syn_sent = 30

  sysctl.net.Netfilter.nf_conntrack_tcp_timeout_syn_recv = 30

  sysctl.net.Netfilter.nf_conntrack_tcp_timeout_established = 3600

  sysctl.net.Netfilter.nf_conntrack_tcp_timeout_close = 20

  sysctl.net.Netfilter.nf_conntrack_tcp_timeout_close_wait = 60

  sysctl.net.Netfilter.nf_conntrack_tcp_timeout_fin_wait = 20

  sysctl.net.Netfilter.nf_conntrack_tcp_timeout_time_wait = 20

  sysctl.net.Netfilter.nf_conntrack_tcp_timeout_last_ack = 30

  sysctl.net.Netfilter.nf_conntrack_udp_timeout = 30

  sysctl.net.Netfilter.nf_conntrack_udp_timeout_stream = 30

  sysctl.net.Netfilter.nf_conntrack_icmp_timeout = 10

  sysctl.net.Netfilter.nf_conntrack_generic_timeout = 120

  Representation of the output:

  None

  HTTP result codes:

  204 NO CONTENT

  [edit] API/4.0

  The query connection inactivity timeouts:

  URL: /api/4.0/edges/{edgeId}/firewall/config/global

  Method: GET

  Representation of entry:

  No payload

  Representation of output

  ...

  30

  3600

  30

  60

  10

  10

  120

  HTTP result codes:

  200 OK

  Set the idle connection timeouts:

  URL: api/4.0/edges/{edgeId}/firewall/config/global

  Method: PUT

  Representation of entry:

  ...

  30

  3600

  30

  60

  10

  10

  120

  ...

  Representation of the output:

  No payload

  HTTP result codes:

  204 NO CONTENT

• ICX:session Timeout

  Hello people:
  
  Some of our users have an error 'Internet Explorer cannot display the web page' - when they are in the APPS that is longer than the session timeout and try and go back to the page they were on (who should really lead to the logon page)
  
  My question is...
  
  If I change the system profile Option "ICX:Session Timeout" to a larger number (say 120 instead of the current default value of 30), should I run autoconfig so on the application layer?
  
  Also because it is a SINGLE sign-on enabled environment, is there any place (other than the Apache Logs) look, to find the cause of this error IE?
  
  To me, it seems that the URL to redirect does not work as expected.
  
  Thanks in advance for your help

  Check the Apache logs for possible errors.

  Please see these documents.

  Reconnect loops due to the Icx: time limit [ID 369950.1]
  Advice and queries for the resolution of the problems of Timeout of Session Forms [402674.1 ID]
  Can't get out of the e-Business Center when the session has expired. [603701.1 ID]

  Thank you
  Hussein

• Catch the event Web Service Session Timeout

  Hi all

  I have a LV Web Service communicate to a web client (Chrome, IE, FF, etc.).  The user connects to the server and create a new session for him to help create Session VI.  One of the entrances to this function is a timeout value (default 60000ms).  The sessions behavior is such that if the user does not activate an application for web service (GET/POST/PUT/etc) within the time limit, then the session is automatically destroyed by the web service.  That's what I want, it's fantastic.

  My question is How can I detect when the session timeout happens? Another way to say, How can I detect when the user session is automatically destroyed?

  What I tried:

  • Of course, I can provide a "logout" link to the user calling ultimately "Destroy Session" VI, but I can't count on the user actually click this link (e.g. you really explicitly sign out of gmail or simply close your web browser?)
  • I thought that the only way to proceed would be to save the cookie of session ID returned by create Session VI and then query this ID to see if the session still exists (check if Session exists VI).  If the session does not exist, well, I know it has expired or the user manually destroyed it.  However, even if I save the cookie ID, I don't see where I can actually use it any where (especially not check if Session is VI). It just seems no value given to the range of sessions.

  Is this possible?

  Thank you

  Rory

  Sorry, Thomas, but that isn't going to work.  Think about it - you do not request a web service during the time-out period. You get ONLY a web service request when the client actually asked something.  The customer does not have during a timeout; It's just times out... so, there is no node on the block diagram to check because there is no block diagram... get it?

  No worries, however, I found the solution [read: workaround], even if the LV can do it (from 2013sp1).

  The best way to detect if a user session times out / out times would be for LV to this exhibit as an event in the web service. The following approach would be for LV accepts a cookie as an entry ID and then provides information on this session (i.e. the session exists).  I have a smell of two feature requests...

  But because BT cannot do these things (or not exposed to the developer), you will need to get creative on the client side.  Since I'm on Javascript/jQuery/AJAX on my front end, then it is possible for me to detect when the customer leaves the page or close the browser.  It comes to $(window) .unload () in jQuery.  Then, I can take this event and an asynchronous AJAX command of fire to one of my web service VI that will eventually call the "destroy Session" VI.

  For more information see the site here:

  http://lavag.org/topic/18490-catch-session-timeout-events-in-LV-Web-service/

  Hope this helps someone.

• AnyConnect Session Timeout issue

  We have some remote users that are not happy with the SSL Connect connection down after close their laptops or lose their wireless for once. I read this question and answer of a Cisco page and I was wondering where the session time-out setting is changed. It's on the network client, software map AnyConnect or ASA firewall?

  Thank you, Pat.

  Q. What is the AnyConnect reconnect behavior?

  A. AnyConnect will attempt to reconnect if the connection is interrupted. This behavior is not configurable and auto. As long as the session on the SAA is still valid, the session will resume if AnyConnect can restore the physical connection.

  Version 2.2 includes a roaming feature that allows AnyConnect reconnect after a sleep of PC. The client will continue to try indefinitely until the head told him he can't reconnect and the client will not immediately RIP into the tunnel when the system goes Standby/Hibernate implementation. For customers who don't want this feature, set the session timeout value low to prevent sleep or resume reconnects.

  And also, for the new AnyConnect profile changes take effect, you will need to reconnect your AnyConnect session if the new policy is pushed to the client.

• WLAN - session timeout

  I was told it is advisable to ISE to configure the session timeout something > s 7200 (2 hours).

  What happens if we do not enable session timeout at all? (WLAN/advanced, "Enable Session Timeout")

  What would be the implication/security operation, if any?

  It means customer would authenticate only once, and can stay on, without having to go through the authentication of 802. 1 x all day?

  Is there a default session timeout value?

  Here's a post on the time-out settings

  https://rscciew.WordPress.com/2014/05/07/timeout-setting-on-wireless-LAN-Controller/

  As far as I understand it, more big session timeout values can train your oblique stats Cordless drill. Otherwise there is no adverse impact to increase it.

  HTH

  Rasika

  Pls note all useful responses *.

• AC VPN: vpn-session-timeout and prompt the user

  Hello

  Is it possible to invite the user to continue the session shortly before it hits the vpn-session-timeout value (ASA).

  Thank you

  Sean

  Sean,

  I believe that no job like this been done on it by the BU.

  We had this never open a:

  https://Tools.Cisco.com/bugsearch/bug/CSCsx17267/?reffering_site=dumpcr

  M.

• The 'IETF-RADIUS-Idle-Timeout' value substitute "Vpn-session-timeout' of group policy?

  Hello community,

  I wish to have a dynamic substitution of "Vpn-session-timeout' of Group Policy (using"ldap attribute-map").

  Read the section "Support for RADIUS authorization attributes" of the SAA, it is not clear, but apparently attribute 'IETF-RADIUS-Session-Timeout' being Cisco attribute name of the ASA to "vpn-session-timeout '.

  Can anyone confirm?

  R, Alex

  Yes!

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_ser...

• ISE 1.1 - switch ignores 'Session-Timeout '.

  Hi all

  I'm playing with the service to ISE customers and have some difficulties in function of time.

  After comments connects, the Radius attributes are sent to the switch (3750G) one of them is Session-Timeout, which should be similar to 1 h (DefaultOneHour)

  According to ISE logs and debugs switch, ISE has done well and this attribute has been sent but it seems that the switch simply ignores.

  

  May 24 07:03:11.658: %SEC-6-IPACCESSLOGP: list ACL-DEFAULT denied udp 10.1.100.194(1029) -> 10.1.100.2(389), 1 packet
  19:46:57: RADIUS: COA  received from id 36 10.1.100.6:64700, CoA Request, len 183
  19:46:57: RADIUS/DECODE: parse unknown cisco vsa "reauthenticate-type" - IGNORE
  19:46:57: RADIUS/ENCODE(00000000):Orig. component type = Invalid
  19:46:57: RADIUS(00000000): sending
  19:46:57: RADIUS(00000000): Send CoA Ack Response to 10.1.100.6:64700 id 36, len 38
  19:46:57: RADIUS:  authenticator 0B 30 6E 9B DF 97 0D A0 - D9 8B A5 5A 11 39 3E 41
  19:46:57: RADIUS:  Message-Authenticato[80]  18
  19:46:57: RADIUS:   11 42 82 E2 52 68 DF 28 CD 43 AE 88 0C 5D 91 10            [ BRh(C]]
  19:46:57: RADIUS/ENCODE(00000026):Orig. component type = Dot1X
  19:46:57: RADIUS(00000026): Config NAS IP: 0.0.0.0
  19:46:57: RADIUS(00000026): Config NAS IPv6: ::
  19:46:57: RADIUS/ENCODE(00000026): acct_session_id: 27
  19:46:57: RADIUS(00000026): sending
  19:46:57: RADIUS/ENCODE: Best Local IP-Address 10.1.100.1 for Radius-Server 10.1.100.6
  19:46:57: RADIUS(00000026): Send Access-Request to 10.1.100.6:1812 id 1645/25, len 267
  19:46:57: RADIUS:  authenticator 6D 92 DC 77 87 47 DA 8E - 7D 6B DD DD 18 BE DC 33
  19:46:57: RADIUS:  User-Name           [1]   14  "0016d329042f"
  19:46:57: RADIUS:  User-Password       [2]   18  *
  19:46:57: RADIUS:  Service-Type        [6]   6   Call Check                [10]
  19:46:57: RADIUS:  Vendor, Cisco       [26]  31
  19:46:57: RADIUS:   Cisco AVpair       [1]   25  "service-type=Call Check"
  19:46:57: RADIUS:  Framed-IP-Address   [8]   6   10.1.100.194
  19:46:57: RADIUS:  Framed-MTU          [12]  6   1500
  19:46:57: RADIUS:  Called-Station-Id   [30]  19  "00-24-F9-2D-83-87"
  19:46:57: RADIUS:  Calling-Station-Id  [31]  19  "00-16-D3-29-04-2F"
  19:46:57: RADIUS:  Message-Authenticato[80]  18
  19:46:57: RADIUS:   AD EB 99 4A F2 B9 4E BB 2E B3 E2 04 BE 5B 0C 72             [ JN.[r]
  19:46:57: RADIUS:  EAP-Key-Name        [102] 2   *
  19:46:57: RADIUS:  Vendor, Cisco       [26]  49
  19:46:57: RADIUS:   Cisco AVpair       [1]   43  "audit-session-id=0A01280100000016043E0D23"
  19:46:57: RADIUS:  NAS-Port-Type       [61]  6   Ethernet                  [15]
  19:46:57: RADIUS:  NAS-Port            [5]   6   50107
  19:46:57: RADIUS:  NAS-Port-Id         [87]  22  "GigabitEthernet1/0/7"
  19:46:57: RADIUS:  Called-Station-Id   [30]  19  "00-24-F9-2D-83-87"
  19:46:57: RADIUS:  NAS-IP-Address      [4]   6   10.1.100.1
  19:46:57: RADIUS(00000026): Sending a IPv4 Radius Packet
  19:46:57: RADIUS(00000026): Started 5 sec timeout
  19:46:57: RADIUS: Received from id 1645/25 10.1.100.6:1812, Access-Accept, len 272
  19:46:57: RADIUS:  authenticator F1 5F 57 72 FD 80 95 20 - 46 47 B5 CE DF 63 6E 1A
  19:46:57: RADIUS:  User-Name           [1]   19  "[email protected]/* */"
  19:46:57: RADIUS:  State               [24]  40
  19:46:57: RADIUS:   52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 30 41  [ReauthSession:0A]
  19:46:57: RADIUS:   30 31 32 38 30 31 30 30 30 30 30 30 31 36 30 34  [0128010000001604]
  19:46:57: RADIUS:   33 45 30 44 32 33            [ 3E0D23]
  19:46:57: RADIUS:  Class               [25]  49
  19:46:57: RADIUS:   43 41 43 53 3A 30 41 30 31 32 38 30 31 30 30 30  [CACS:0A012801000]
  19:46:57: RADIUS:   30 30 30 31 36 30 34 33 45 30 44 32 33 3A 69 73  [00016043E0D23:is]
  19:46:57: RADIUS:   65 2F 31 32 34 30 33 36 37 39 31 2F 32 39 37   [ e/124036791/297]
  19:46:57: RADIUS:  Session-Timeout     [27]  6   2940
  19:46:57: RADIUS:  Termination-Action  [29]  6   0
  19:46:57: RADIUS:  Message-Authenticato[80]  18
  19:46:57: RADIUS:   26 46 2C B6 75 95 AF 37 E6 3B B1 CB F2 70 E0 8D           [ &F,u7;p]
  19:46:57: RADIUS:  Vendor, Cisco       [26]  72
  19:46:57: RADIUS:   Cisco AVpair       [1]   66  "ACS:CiscoSecure-Defined-ACL=#ACSACL#-IP-Contractors-ACL-4fbcd736"
  19:46:57: RADIUS:  Vendor, Cisco       [26]  42
  19:46:57: RADIUS:   Cisco AVpair       [1]   36  "profile-name=Microsoft-Workstation"
  19:46:57: RADIUS(00000026): Received from id 1645/25
  19:46:57: RADIUS/DECODE: parse unknown cisco vsa "profile-name" - IGNORE
  May 24 07:03:19.132: %MAB-5-SUCCESS: Authentication successful for client (0016.d329.042f) on Interface Gi1/0/7 AuditSessionID 0A01280100000016043E0D23
  May 24 07:03:19.132: %AUTHMGR-7-RESULT: Authentication result 'success' from 'mab' for client (0016.d329.042f) on Interface Gi1/0/7 AuditSessionID 0A01280100000016043E0D23
  May 24 07:03:19.140: %EPM-6-POLICY_REQ: IP 10.1.100.194| MAC 0016.d329.042f| AuditSessionID 0A01280100000016043E0D23| AUTHTYPE DOT1X| EVENT APPLY
  May 24 07:03:19.165: %EPM-6-AAA: POLICY xACSACLx-IP-Contractors-ACL-4fbcd736| EVENT DOWNLOAD-REQUEST
  19:46:57: RADIUS/ENCODE(00000000):Orig. component type = Invalid
  19:46:57: RADIUS(00000000): Config NAS IP: 0.0.0.0
  19:46:57: RADIUS(00000000): sending
  19:46:57: RADIUS/ENCODE: Best Local IP-Address 10.1.100.1 for Radius-Server 10.1.100.6
  19:46:57: RADIUS(00000000): Send Access-Request to 10.1.100.6:1812 id 1645/26, len 144
  19:46:57: RADIUS:  authenticator 1A 52 18 C5 25 A7 5C DC - 29 C9 5C 7C C5 B3 FC 58
  19:46:57: RADIUS:  NAS-IP-Address      [4]   6   10.1.100.1
  19:46:57: RADIUS:  User-Name           [1]   38  "#ACSACL#-IP-Contractors-ACL-4fbcd736"
  19:46:57: RADIUS:  Vendor, Cisco       [26]  32
  19:46:57: RADIUS:   Cisco AVpair       [1]   26  "aaa:service=ip_admission"
  19:46:57: RADIUS:  Vendor, Cisco       [26]  30
  19:46:57: RADIUS:   Cisco AVpair       [1]   24  "aaa:event=acl-download"
  19:46:57: RADIUS:  Message-Authenticato[80]  18
  19:46:57: RADIUS:   2B 6B 13 37 0D 25 11 E9 6A 56 35 D8 91 9F EF F0           [ +k7?jV5]
  19:46:57: RADIUS(00000000): Sending a IPv4 Radius Packet
  19:46:57: RADIUS(00000000): Started 5 sec timeout
  May 24 07:03:19.191: %SEC-6-IPACCESSLOGP: list ACL-DEFAULT denied tcp 10.1.100.194(2125) -> 10.1.100.6(8443), 1 packet
  19:46:57: RADIUS: Received from id 1645/26 10.1.100.6:1812, Access-Accept, len 359
  19:46:57: RADIUS:  authenticator 31 B0 73 93 CA 0E 5C 7C - 11 29 AA 57 6C A1 53 D8
  19:46:57: RADIUS:  User-Name           [1]   38  "#ACSACL#-IP-Contractors-ACL-4fbcd736"
  19:46:57: RADIUS:  State               [24]  40
  19:46:57: RADIUS:   52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 30 61  [ReauthSession:0a]
  19:46:57: RADIUS:   30 31 36 34 30 36 30 30 30 30 30 30 35 44 34 46  [0164060000005D4F]
  19:46:57: RADIUS:   42 44 44 44 33 37            [ BDDD37]
  19:46:57: RADIUS:  Class               [25]  49
  19:46:57: RADIUS:   43 41 43 53 3A 30 61 30 31 36 34 30 36 30 30 30  [CACS:0a016406000]
  19:46:57: RADIUS:   30 30 30 35 44 34 46 42 44 44 44 33 37 3A 69 73  [0005D4FBDDD37:is]
  19:46:57: RADIUS:   65 2F 31 32 34 30 33 36 37 39 31 2F 32 39 38   [ e/124036791/298]
  19:46:57: RADIUS:  Termination-Action  [29]  6   1
  19:46:57: RADIUS:  Message-Authenticato[80]  18
  19:46:57: RADIUS:   80 EF 5B 80 76 F1 C9 37 0B 25 34 37 10 57 CC 44          [ [v7?47WD]
  19:46:57: RADIUS:  Vendor, Cisco       [26]  47
  19:46:57: RADIUS:   Cisco AVpair       [1]   41  "ip:inacl#1=permit udp any any eq domain"
  19:46:57: RADIUS:  Vendor, Cisco
  SW3750-1# [26]  48
  19:46:57: RADIUS:   Cisco AVpair       [1]   42  "ip:inacl#2=permit ip any host 10.1.100.6"
  19:46:57: RADIUS:  Vendor, Cisco       [26]  57
  19:46:57: RADIUS:   Cisco AVpair       [1]   51  "ip:inacl#3=deny ip any 10.0.0.0 0.255.255.255 log"
  19:46:57: RADIUS:  Vendor, Cisco       [26]  36
  19:46:57: RADIUS:   Cisco AVpair       [1]   30  "ip:inacl#4=permit ip any any"
  19:46:57: RADIUS(00000000): Received from id 1645/26
  May 24 07:03:19.216: %EPM-6-AAA: POLICY xACSACLx-IP-Contractors-AC
  SW3750-1#
  SW3750-1#
  SW3750-1#L-4fbcd736| EVENT DOWNLOAD-SUCCESS
  May 24 07:03:19.216: %EPM-6-POLICY_APP_SUCCESS: IP 10.1.100.194| MAC 0016.d329.042f| AuditSessionID 0A01280100000016043E0D23| AUTHTYPE DOT1X| POLICY_TYPE Named ACL| POLICY_NAME xACSACLx-IP-Contractors-ACL-4fbcd736| RESULT SUCCESS
  May 24 07:03:20.147: %AUTHMGR-5-SUCCESS: Authorization succeeded for client (0016.d329.042f) on Interface Gi1/0/7 AuditSessionID 0A01280100000016043E0D23
  19:46:58: RADIUS/ENCODE(00000026):Orig. component type = Dot1X
  19:46:58: RADIUS(00000026
  SW3750-1#
  SW3750-1#
  SW3750-1#
  SW3750-1#): Config NAS IP: 0.0.0.0
  19:46:58: RADIUS(00000026): Config NAS IPv6: ::
  19:46:58: RADIUS/ENCODE: Best Local IP-Address 10.1.100.1 for Radius-Server 10.1.100.6
  19:46:58: RADIUS(00000026): Sending a IPv4 Radius Packet
  19:46:58: RADIUS(00000026): Started 5 sec timeout
  19:46:58: RADIUS: Received from id 1646/35 10.1.100.6:1813, Accounting-response, len 38
  SW3750-1#
  
      SW3750-1#sh authe sess int g 1/0/7
  Interface:  GigabitEthernet1/0/7
  MAC Address:  0016.d329.042f
  IP Address:  10.1.100.194
  User-Name:  [email protected]/* */
  Status:  Authz Success
  Domain:  DATA
  Security Policy:  Should Secure
  Security Status:  Unsecure
  Oper host mode:  multi-auth
  Oper control dir:  both
  Authorized By:  Authentication Server
  Vlan Group:  N/A
  ACS ACL:  xACSACLx-IP-Contractors-ACL-4fbcd736
  Session timeout:  N/A
  Idle timeout:  N/A
  Common Session ID:  0A01280100000016043E0D23
  Acct Session ID:  0x0000001B
  Handle:  0x2F000017
  Runnable methods list:
  Method   State
  mab      Authc Success
  dot1x    Not run
  SW3750-1#
  

  Has anyone else encountered similar?

  I tried 12.2 (58) and now I'm stable

  Cisco IOS software, software C3750 (C3750-IPSERVICESK9-M), Version 15.0 (1) SE2, VERSION of the SOFTWARE (fc3)

  but in both cases, it is similar.

  concerning

  Przemek

  Hello

  Have you tried 12.2.55SE3 IOS which is recommended (tested) according to TrustSec 2.0 Design and getting started Guide implemented?

  What is your port configuration? Have you included orders "reauth?

  int gX/Y

  ...

  periodic authentication

  Server to authenticate again authentication timer

  See you soon,.

  Seba

• The access admin VCS session timeouts

  Hello

  I have asked me if there are VCS performance problems if the admin access session has the value zero, or, for example 30 minutes.

  I know that this seems to be a stupid question because he absolutely should not affect the performance of VCS, however can someone please confirm this? In addition, the number of connected users admin will have a detrimental effect on the VCS? Once again, I guess not as the default is not limited, but confirmation would be greatly appreciated.

  Thank you very much

  Howard

  Hi Howard,.

  As far as I know, the number of sessions of admin and admin session logout, does not affect the performance of VCS much. However, please keep in mind that it certainly affects the performance of VCS if the number of sessions admin VCS is superior > 5 as VCS responded to all the commands and requests by admin VCS sessions.

  So, it is advisable to set the session timeout no matter what between 15-30 minutes, so VCS kicks on the sessions inactive admin and keep resources free VCS.

  Hope that answers your questions.  Feel free to rate this response accordingly.

  Thank you

  Saurabh

• Async AS2 in B2B of Oracle 11 g and proxy reversed - how to indicate the external URL of DND

  Hello

  We have a SYNCHRONIZATION connections of AS2 work via proxy leaving and entering proxy reverse. No problem. But in AS2 header of our messages when ASYNC DND is enabled B2B 11 G sends our internal hostname (not accessible from the internet) as URL of return of DND. Thus, our partners cannot return the MDN

  How can I replace it? In 10g I could set the channels on host partner and use them in the conventions, but now they are only 'internal' type and cannot by basic HTTP.

  (Suggestions appreciated - I searched the documentation, forums and Oracle Support better than I could, but I was unable to find something useful)

  Thanks in advance

  Kamil

  Okay, I think I found the answer.

  The only way to do this correctly is to put the URL of the proxy to the Recepit delivery on the chanel TP Option. This means that in the future, any changes made to the external URL will require that update us all affected chanel TP configurations.

  Kind regards

  Kamil