Extract/Scan for numbers of several lines of strings

Similar Questions

• Separate the phone numbers on several lines

  Hello

  I have a list of phone numbers in a single column. Some cells have 1 phone number, some have 2, and some have 0. Cells with 2 phone numbers are separated by semicolons.

  I need all the phone numbers in a single column with 1 phone number in each row. The order does not matter, so I'll "Sort Ascending" once completed to get rid of the empty cells with no phone number.

  I need a function that takes the numbers after the comma and puts them on their own line in the same column.

  Note that the numbers are in the format: + 1-xxx-xxx-xxxx so if please be aware formatting as text and not as a mathematical equation.

  Thank you in advance.

  Hi B,

  Easy enough, as long as all entries are accurate according to the format you described. Here are two examples, all tous deux two on the same table. The selected cells are part of the first example and are not used in the second.

  

  End of flag: The two examples use the flag to end on the A11 to indicate when the formulas have reached the end of the list. As entered flag consists of eight occurrences of the text "end" (including the trailing space), with the final space deleted. This will be assimilated by the formula two phone numbers, provide an indicator of the end of each list.
  

  
  

  Example 1:

  Separates the first phone number in column B using this formula in B2, filled up to the last line containing a phone number in column A (or the line beyond if you want that the flag of the 'end').

  B2: = IF (LEN (A) < 1", LEFT(A,15))

  Len (A) checks no entry in its ranks. If that is found, IF put a string NULL. If there is an entry, LEFT out the first 15 characters.

  The second n phone number each line is copied into column C with this similar formula in C2 and filled up to the last line containing an entry in column A.

  C2: is equal to IF (LEN (A) < 16", RIGHT(A,15))

  If there are two numbers in this line from A cell, the semi colon will be the 16th character.

  After having extracted the numbers in two columns:

  Select all the cells in column B of B2 on the last containing a B10 number in this example). Copy.

  Go menu Edition > paste formula results

  Select all the cells in column C of C2 on the last containing a number C10). Copy.

  Click once on the empty cell in column B, following the list of the "first numbers" (B11 in this example).

  Go to edit > paste the results of the formulas.

  You can now sort the table according to the values (telephone numbers) in column B.

  Example 2:

  Separates the first phone number in column B using this formula in B2, filled up to the last line containing a phone number in column A (or the line beyond if you want that the flag of the 'end').

  B2: = IF (LEN (A) < 1", LEFT(A,15))

  Len (A) checks no entry in its ranks. If that is found, IF put a string NULL. If there is an entry, LEFT out the first 15 characters.

  The second phone number n that each line is copied into column B, starting after the cell containing the flag of the 'end '.

  Enter the following formula in the marketing of cells (B12 in the example) and fill down until the formula produces another flag to end.

  B12: = IF (LEN (A2) < 16", RIGHT(A2,15))

  Note that because this version of the formula is not on the same line as the EMF of the cell that is copied the phone number, it must the line included in the references.

  When the terminator is reached:

  Click on each of the cells that contain the end flags, and then press DELETE to remove the flags from the list.

  Select all THE cells B2 at the end of the list of telephone numbers. Copy.

  Go menu Edition > paste formula results

  With replaced by their latest results calculated formulas, you can now sort the table on column B.

  Kind regards

  Barry

• Assignment of sequential numbers to several lines with a common attribute

  Oracle 10i, seek to alter a query only select a total of 96 unique compoundnames and number each batchids Group 1-96.
  
  
  Entry
  Table EX
  
  Unique_ID, CompoundName, BatchID, quantity
  -------------------------------------------------------------------
  1, 1000 EX, EX 1000 100, 100
  2, 1000 EX, EX 101 1000, 100
  3, 1000 EX, EX 1000 102, 100
  4, EX 1001, EX 1001 100, 100
  5, EX 1001, EX 1001 101, 100
  6, EX 1001, EX 1001 102, 100
  7, EX 1001, EX 1001 103, 100
  8, EX 1001, EX 1001 104, 100
  9, EX 1001, EX 1001 105, 100
  10, EX 1002, 1002 100 EX, 100
  11, EX 1002, 1002 101 EX, 100
  12, EX 1002, 1002 102 EX, 100
  .
  .
  .
  100 +, EX 1095, EX-1095 100, 100
  
  
  -----
  Using
  
  Select distinct * from
  (
  Select Unique_id, CompoundName, batchid, quantity, Sum (Quantity) on sumqty (CompoundName partition)
  EX
  )
  where < 500 sumqty
  Order by 2, 3;
  
  Provides data collected by compoundnames and the total amount of all sharing the same name composed data (and only the results with the total amount < 500).
  
  I am looking for a way to recover only 96 compoundnames unique (not total the data lines) at a time and the numbering of resemble them this desired output;
  
  
  Unique_ID, CompoundName, BatchID, quantity, Sum (Quantity)?
  -------------------------------------------------------------------
  1 EX 1000, 1000, 100, 100, 300, 1 EX
  2, 1000 EX, EX 101 1000, 100, 300, 1
  3, 1000 EX, EX 1000 102, 100, 300, 1
  
  10, EX 1002, 1002, 100, 100, 300, 2 EX
  11, EX 1002, 1002, 101, 100, 300, 2 EX
  12, EX 1002, 1002, 102, 100, 300, 2 EX
  .
  .
  .
  100 + EX-1095, EX 96, 100, 100, 100 1095
  
  Thanks in advance.
  
  Published by: user13112928 on June 26, 2010 11:49
  
  Published by: user13112928 on June 26, 2010 11:50
  
  Published by: user13112928 on June 26, 2010 12:01

  Then place the DENSE_RANK of the outer query when you filter the data, not the inner query where you have it now.

• performance-sql for table with several lines

  I have a database table that contains information that allows me to determine certain information processing to the breast of a proxy service. I want to be able to get (multiple lines) data from this table.
  
  When I use execute sql it returns only a single row where more than one are expected.
  
  Anyone aware of several rows of a table within the OSB?
  
  Thank you

  Hello
  give something like this in the expression editor...
  {} - run sql('DataSource','Record','select * from...')

  The reason for which you receive only one record is that the return type of this function would be a bunch of files, it would be like... .... ...
  But this return value is not consistent with an XML document because... you will notice that there is no element root for the records...

  For more to come this., wrap the function with any xml tag that acts as a root... in this case...

  Kind regards
  Manoj Nair...

• Oracle Table scan for numbers

  When I use a numeric value against a column defined as varchar in which would adopt it, Oracle performs a full table scan, although there is an index of this column. Is there a reason why Oracle has in this way? I use 10.2.0.3.0
  
  create table employees (empid varchar2 (3));
  
  insert into employees values ('123');
  
  create index emp_index on employees (empid).
  
  Select * from employees where empid = '123'; -Index scan interval
  
  Select * from employees where empid = 123; -Full Table Scan
  
  Select * from employees where empid = to_char (123); -Index scan interval
  
  However, this is not the case when I use a string where clause against a column defined as number.
  
  create table managers (mgr_id number (3));
  
  insert into values of managers (123);
  
  create index mgr_index on managers (mgr_id);
  
  Select * managers where mgr_id = 123; -Index scan interval
  
  Select * managers where mgr_id = '123'; -Index scan interval

  user6794035 wrote:
  When I use a numeric value against a column defined as varchar in which would adopt it, Oracle performs a full table scan, although there is an index of this column. Is there a reason why Oracle has in this way? I use 10.2.0.3.0

  This is due to the average implicit data type conversion Oracle does. Here is the excerpt from the documentation

  Character and multivalued example when a condition compares a character value and a NUMERIC value, Oracle implicitly converts the value of character to a NUMERIC value, instead of converting the NUMBER of value to a character value.

  This can be illustrated using DBMS_XPLAN:

  SQL> EXPLAIN PLAN FOR SELECT * FROM EMPLOYEES WHERE EMPID = 123;
  
  Explained.
  
  SQL> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY);
  
  PLAN_TABLE_OUTPUT
  -----------------------------------------------------------------------------------------------------
  
  Plan hash value: 1445457117
  
  -------------------------------------------------------------------------------
  | Id  | Operation         | Name      | Rows  | Bytes | Cost (%CPU)| Time     |
  -------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |           |     1 |     3 |     2   (0)| 00:00:01 |
  |*  1 |  TABLE ACCESS FULL| EMPLOYEES |     1 |     3 |     2   (0)| 00:00:01 |
  -------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     1 - filter(TO_NUMBER("EMPID")=123)
  

  See the TO_NUMBER() function applied to the EMPID column in the section 'information of predicate? It's the implicit conversion is made. As a function is applied to a column and a function-based Index is not Oracle executes a FTS.

  HTH!

• Help to extract data Clob to a column in a table that has several lines in a table

  Help to extract data Clob to a column in a table that has several lines in a table

  It works for only the first line

  CREATE or REPLACE DIRECTORY XMLDIR AS ' / orabackups';

  Grant read, write on DIRECTORY XMLDIR to the public;

  () dbms_xslprocessor.clob2file

  beef in CLOB,

  XMLDIR IN VARCHAR2,

  "testfile2.txt" IN VARCHAR2);

  DECLARE

  buf CLOB.

  BEGIN

  SELECT H15_DOC

  IN buf

  OF H15TEST. H15_STAGE

  where rownum = 1;

  dbms_xslprocessor.clob2file (buf, 'XMLDIR', 'testfile2.txt');

  END;

  /

  -This error code

  CREATE or REPLACE DIRECTORY XMLDIR AS ' / orabackups';

  Grant read, write on DIRECTORY XMLDIR to the public;

  () dbms_xslprocessor.clob2file

  XData in CLOB,

  XMLDIR IN VARCHAR2,

  "testfile2.txt" IN VARCHAR2,

  CSID in NUMBER: = 0);

  DECLARE

  CURSOR xmlmycur IS SELECT H15_DOC

  OF H15TEST. H15_STAGE

  where rownum = 102140;

  l_clob CLOB.

  XData CLOB.

  BEGIN

  DBMS_LOB.CREATETEMPORARY (l_clob, true);

  DBMS_LOB.CREATETEMPORARY (xdata, true);

  OPEN xmlmycur.

  LOOP

  SEEK xmlmycur INTO xdata;

  dbms_xslprocessor.clob2file (xdata, 'XMLDIR', 'testfile2.txt');

  EXIT WHEN xmlmycur % notfound;

  END LOOP;

  CLOSE Xmlmycur;

  END;

  /

  ORA-21560: 3 argument is null, invalid or out of range

  ORA-06512: at "SYS." DBMS_LOB", line 991

  ORA-06512: at "XDB". DBMS_XSLPROCESSOR', line 324

  ORA-06512: at line 15 level

  FYI, it seems that the file being created will exceed 5 gig

  Yes, it is a known issue with DBMS_XSLPROCESSOR.clob2file with big files.

  Here is a slightly modified version of the code that I posted earlier, fixing WRITE_ERROR except:

  DECLARE

  v_file utl_file.file_type;

  -write a unique to clob

  procedure write_clob (p_content in clob) is

  v_buffer varchar2 (32767).

  V_POSITION pls_integer: = 1;

  v_amount pls_integer: = 32767;

  Start

  loop

  Start

  DBMS_LOB. Read (p_content, v_amount, v_position, v_buffer);

  exception

  When no_data_found then exit;

  end;

  UTL_FILE.put_raw (v_file, utl_raw.cast_to_raw (v_buffer), true);

  V_POSITION: = v_position + v_amount;

  end loop;

  end;

  BEGIN

  -Open the file

  v_file: = utl_file.fopen ('TEST_DIR', 'testfile2.txt', 'wb', 32767);

  -loops through the lines

  for r in)

  Select h15_doc

  of h15test.h15_stage

  )

  loop

  write_clob (r.h15_doc);

  end loop;

  UTL_FILE.fclose (v_file);

  END;

  /

• How can I get several lines to be printed for a blank text field so that it can be filled by hand?

  I have to create forms that are to be completed by hand and by electronic means.  The problem that I am running provides several lines that will be printed for the people who are the form of fill by hand.  I tried to add an image of lines behind the text field, but these would have got in the way when the form has been completed electronically.

  I use LiveCycle Designer ES2 v. 9.0 on a Windows computer.

  Thank you.

  Ok.

  1. Take a textfield
  2. Navigate to the object. Allow multiple lines
  3. Go to the Layout | Height | activate "develop to adapt."
  4. Go to initialize or readyform event (you must change the _ for your textfield) this.rawValue = "___\n___\n___";
  5. Go to the event, enter - this.rawValue = null;
  6. Go to the exit event

  If (this.) RawValue is nothing)

  {

  this.rawValue = "___\n___\n___";

  } else {}

  With this solution you can simulate the same reason above.

  I hope it's useful for you,

  Mandy

• Keithley UNFINISHED 420 'query' error Max scan for instruments

  Hello!

  We have a system for about 9 years. There is a PC with Windows XP and LabView 6.1. In the PC, there is a card GPIB PCI, and via the GPIB cable, 8 Keithley DVMs (including models like 2010, 2400, 2182) connected. A few days ago this old system began to malfunction. There are 4 screws are parallel on this old system - worked fine until now- but none of them are now able to communicate with the Keithley instruments.

  I got a virus check, also verified WinXP, checking the memory and so on (we had several BSOD also on the old PC). Because I couldn't trace the problem in the old system, I decided to check into the Keithleys with a new configuration.

  I have a new PC with a card GPIB + PCI and LabView 2010. I connected this new PC line above with the Keithley instruments GPIB. (old PC disconnected) When I open MAX and I navigate to the GPIB controller, and I scan for instruments, all DVMs Keithley started a signal sound and displays "error 420" on their screens. And I agree I get in MAX.

  So now I have to think that it is a hardware error? Since I have the same problem of communication the DVMs in this new configuration PC...?

  A defective digital Voltmeter can make unreliable GPIB communication? I have no idea where to go now...

  Moreover, in the case of the controller old PCs, I don't get any visible error, only the screw do not communicate (time error). I think I will also try to use the old system again, I will connect the new PC to GPIB channel and listen in the communication with the GPIB Analyzer functionality.

  Thanks for the tips!

  Basic troubleshooting: have you tried simply as an instrument both for the bus connecting? You can also check the cables.

• search for numbers in a large chain

  Hi all how I can search numbers in a big chain, for example the string is

  "23 (233).

  24 (456)

  25 (253)

  I ".

  23,24,25 are difficult numbers, but others are variable numbers that I need them and I mean chain is more please show her block really, I confused with string functions!

  It's the kind of problem that can be solved using regular expressions. The ^ anchor the match to the beginning of a line, so if you enter 51 in control of the resulting regular expression search string will be ^ 51\ ((\d+)------). The regex function will look like a line beginning with 51 [951 is therefore not a match], followed (, l ' Interior (\d+) parameter most is a capturing group that contains one or more numeric characters [must extend the bottom of the function regex match to get the output of the capturing group] and finally the closing). The opening and closing parentheses must be preceded by the escape character-because they are special characters.

  In this case, I assumed that the string is composed of several lines.

  Ben64

  

• Get several lines with the request - please help

  Hello
  
  I have query that gives me the output below.

  select distinct a.*,cu1.usr_key,cu1.first_nm,cu1.last_nm
  from(
        select ng.grp_key, ng.grp_nm , gt.grp_typ_nm, stts.nm as grp_sts, ng.expiry_date, ng.updt_dttm, stts.stts_key
        from new_group ng, user_group ug, group_type gt, status stts
        where ug.grp_key = ng.grp_key and ng.grp_typ_key = gt.grp_typ_key and 
        ng.stts_key = stts.stts_key and
        ug.usr_grp_rl_typ_key = 1 and 
        lower(ng.grp_nm) like 'test foe%'
        union 
        select ng.grp_key, ng.grp_nm , gt.grp_typ_nm, sts.nm as grp_sts, ng.expiry_date, ng.updt_dttm, sts.stts_key
        from new_group ng, group_type gt, status sts
        where ng.grp_typ_key = gt.grp_typ_key and ng.stts_key = sts.stts_key and 
        lower(ng.grp_nm) like 'test foe%')a, common_user cu1, user_group ug1
  where cu1.stts_key = a.stts_key and cu1.usr_key = ug1.usr_key and ug1.usr_grp_rl_typ_key = 1 and ug1.grp_key(+) = a.grp_key;

  18345 enemy test remove Group organization DELETED February 9, 12 AM 3 09.38.34 29742 Sam Saed
  18345 enemy test remove Group organization DELETED 9 February 12 09.38.34 AM 3 29643 dummyName514 dummy
  18345 enemy test remove Group organization DELETED February 9, 12 09.38.34 AM 3 28917 TestMObileUser Gujral
  18345 enemy test remove Group organization DELETED February 9, 12 AM 3 27284 Rocky jegou 09.38.34
  18345 enemy test remove Group organization DELETED February 9, 12 AM 3 28920 Bhavani Gujral 09.38.34
  18345 enemy test remove Group organization DELETED 9 February 12 09.38.34 AM 3 29645 dummyFName516 dummy
  18345 enemy test remove Group organization DELETED February 9, 12 AM 3 27316 Karthik Gilani 09.38.34
  18345 enemy test remove Group organization DELETED February 9, 12 AM 3 28147 Bowl David Mathews 09.38.34
  18345 enemy test remove Group organization DELETED February 9, 12 AM 3 09.38.34 29731 Sam Saed
  18345 enemy test remove Group organization DELETED February 9, 12 AM 3 28919 Madhu mango 09.38.34
  
  For a group 18345, there are 10 users and this is the reason why I get a multiple user records.
  
  I can't avoid these last three columns, because I have to show these values in the application.
  
  In my opinion, the UNION is at the origin of the problem. Can I replace the UNION here? Please share your ideas on this.
  
  Thank you
  Rambeau
  
  Published by: ouali on February 9, 2012 22:35

  Hello

  because I have to show these values in the application.

  What is your problem then? If you simply issue a SELECT statement to application code or send the data back to REF CURSOR, it will be quite OK to have several lines. That's what the SELECT statements are for: to return sets of results with several lines.
  So, could not explain your problem more in detail please? If you get an error somewhere, provide the code causing the error and the error message (it is probably ORA-001422 exact extraction returns several lines somewhere in PL: / SQL, isn't it? then post here).

  In my opinion, the UNION is at the origin of the problem. Can I replace the UNION here? Please share your ideas on this.

  Us don't know not the answer to this question, because no one here knows your needs (what you need).

• Using pathfinder to cut a shape of several lines

  Hello

  There is probably a really easy answer to this, but I'm not. I created a model space "scratches" by using several lines aligned and equal remote etc, I then placed a form of rectangle on top of these lines and to extract the rectangle of the lines so that I'm only left with the pattern of scratches in the area of the rectangle. Hope that makes sense, could not think of a better way to describe!

  Thank you

  I'm not sure that understand what you're trying to do, i.e. the need to use the Scout at all. What group the traits and resize or make a compound path? Or even by selecting copy/cut, then 'paste' in the new frame?

  You try to use it as a filling for a frame that is containsomething else? If so, you might want to build a gradient instead.

  Peter

• How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  I recently had to format my hard drive and reinstall iTunes 12.3.2.35 on my Win7 PC. As part of the re - install iTunes, I clicked on the button scan for music.  This has created duplicates several of my songs.  I deleted then the duplicate songs from iTunes, but when I went to play a few songs a pop-up said "the song would not be because the original could not be found.  You want to locate? "When I tried to locate the song it is not found, but when I pulled the songs out of the trash they could be found.

  How can I keep the original and remove any duplicate songs in iTunes on PC Win7 which took place after iTunes to scan for music during a re - install?

  iTunes can create duplicates if the same content is added several times from outside the media folder when it is about to make copies of everything that is added to the library, or is added from an external drive that hosts the press kit that was disconnected during the launch of iTunes.

  Official notice of Apple on the duplicates is here: find and remove duplicates in your iTunes library. This is a manual process and article fails to explain some of the potential pitfalls such as the lost coast and membership of playlist, or sometimes the same file can be represented by multiple entries in the library as well as a removal and recycling the file will break all the others.

  Use MAJ > display > show items to reproduce exactly to display the duplicates because it is normally a selection more useful. You must manually select all but one of each group to remove. Sort the list by Date added can make easier select appropriate tracks, but it works better when executed immediately after the dupes were created.  If you have several entries in iTunes connected to a same file on the disk hard then don't not send to trash.

  Use my DeDuper script (Windows only) If you are not sure, do not want to do it by hand, or want to maintain ratings, play counts and playlist membership. See this background thread , this post for detailed instructions and Please take note of the warning to back up your library before deduping.

  (If you don't see the menu bar press ALT to temporarily view or CTRL + B to keep displayed.)

  The latest version of the script can put away the dead links as long as there is at least a double live to merge his stats and membership of the playlist and must deal wisely when the same file has been added through multiple paths.

  TT2

• I want to create a 2 cells in demand for numbers, the 1st cell is a dropdown menu with items of text, when choosing an item, that it would be represented by a numeric value in the other cell. How can I do?

  I want to create a 2 cells in demand for numbers, the 1st cell is a dropdown menu with items of text, when choosing an item, that it would be represented by a numeric value in the other cell. How can I do?

  You can use vlookup() like this:

  (1) crate a table like this:

  the first line is a heading row

  the first column contains the same list of items in the context menu

  the second column contains the corresponding values

  name of the table 'value '.

  

  In another table (where the pop-up menu), you can use the table of choice of 'Value' like this:

  

  create a drop-down list in cell B1

  Select cell C1 and type (or copy and paste) the formula:

  = VLOOKUP (B1, Value::A:B, 2, 0)

  short hand for this is:

  C1 = VLOOKUP (B1, Value::A:B, 2, 0)

  now change the pop-up to display the value in the change of cell C1

• OR Max: No button "Scan for instruments.

  Before I start I will say that I used the NI GPIB-USB-HS devices for years with relatively few questions. I also visited several forums posted by people with a similar problem.  Basically, my problem is as the title suggests: when I open OR max and look for the GPIB-USB-HS device there is no button "scan for instruments" I'm used to seeing on the top bar.

  It's the first time I used nor max v. 16.0 and it is quite frustrating.  I believe that my ni488 driver is up to date and I have included all the details of the pilot in the screenshot below.  I can't understand what's not here, but my program LabView can not connect the GPIB instrument.

  A couple more things to note:

  -The same GPIB-USB-HS device that doesn't work here works on another computer with an earlier version of NI Max.

  -LabView program that I use to connect the GPIB instrument which does not work here works on another computer

  -When I browse for the GPIB-USB-HS in 'Device Manager' and select 'set to day pilot' windows tells me that the driver is up-to-date

  -I'm on windows 8
  

  Please help me.

  Hi JohnDoe89,

  This sounds like it would be very frustrating to meet - so let's see if we can reduce what could be the cause of the problem, we can determine the best way to solve it.

  You mentioned that things work correctly on another computer with software versions different-can you let us know which are running the versions of the software on this computer? It would be useful to compare to the list in the picture you posted.

  In the list you posted (I guess it's the software on the computer that does not work, rather than one that is), I noticed that you use 16.0 versions of many of your drivers. The readme for 488,2 drivers, it looks like the version 16.0 is backward compatible with LabVIEW 2013, rather than the 2012 I see on your list. If this computer is running an earlier version of the drivers/MAX, but the same version of LabVIEW, it's perhaps at least a part of what is causing the problem.

  If you can put the list of software for computer work, which will give us more information to work from.

• Match pattern IMAQ 4 to superimpose several lines 2

  Hello community OR,.

  I have a problem connecting to the match pattern to superimpose several lines 2.

  I want to track an object from a video webcam.

  In this help http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/ it is said that the Matches (Pixels) (Bounding Box) must be connected to the superposition of several lines to the end of line Points. But I can't take the bounding box only. I tried the unbundling of the table 1 d of the clusters, but I can't do it.

  Any help is appreciated. I can post a picture of my code if requested.

  Thank you

  Marwan Sabry

  I'm sorry, it's an array of clusters.
  -Therefore, index 0 for the first game.
  -unbundling with name for encompassing and then pass it to overlay vi.