F5 will not read a map and will not HDMI output

Similar Questions

• How to have separate video and audio over HDMI output Lenovo Thinkpad T410

  I have lenovo T410 and wanted to connect it to my TV high definition. Earlier had problems, but after buying SIIG Displayport to HDMI its job very well. In fact the video and Audio can now be read / listened to on my HDTV via HDMI. However, I have a separate 2.1 computer speaker system, which has much better sound output than my HDTV. Now if I want to see the video on HD TV via HDMI and audio output to speakers for laptop (connected to the 3.5 mm wired 2.1 speaker system), how to do that. I went to SmartAudio settings in the Control Panel, but there is no option of separates HDMI audio to the speakers only.

  I don't want to buy another cable with RGA Audio Converter 3.5 mm female port. Please suggest a direct solution.

  in win 7 do a right-click on the speakers on your lower right corner icon, select playback devices, click on speakers, click on set default, click OK and it should work (sound must come from your computer speakers or the computer 3, 5mm jack)

• I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Original title: no dvd

  I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Hi Lesliestones,

  ·         Did you do any change on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2: You can run the fixit and check if it works.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I hope this helps.

• Maps and layouts: update of the failure or will not erase

  Select Page layouts et Cards fail to update correctly. This is the case for the unreleased updates to with no associated collection and the unreleased cards with associated No. layouts. In addition, in some cases published layouts or maps indicate the status ""update failed, obsolete, "but the changes make their way to the app." This happens for some layouts and cards, but not all; In addition, some layouts and cards work fine for awhile and then fail to publish or will not erase. Is this a known issue? [using publish.adobe.com app 2015.2.100 version]

  Hey Kristen - Sounds complicated, and I don't know all the details completely, but I have had similar experiences and started to notice the following, especially with the cards and layouts.

  Scenario:

  I have a card and use it in a mapping rule for a layout. Everything is cool, work the way you want.

  Now, I want to remove the card (I am resetting things for a demo session and want to start without cards nor the updates page with the exception of the default values.)

  If I delete the card first, I get the message "Failed to update, obsolete".

  To avoid this or delete it, I need to remove all mapping rules in all page layouts that call the map and publish all these layouts (without the map reference.)

  So I new and remove the card.

  I followed a similar procedure for the removal of the page layouts-

  The value of all the collections so that none use the layout to remove

  Publish all the collections that are obsolete.

  Then you can new and remove the unwanted provision.

  It's probably pretty fussy, but it works.

  I've had similar experiences with items and collections. If an article or a collection is used in several collections, I would get a similar error. I had to work on what article or the collection has been used in several places before I could new and delete.

  Hope that helps

• Since I downloaded El Capitan I think I can't paste it into my external hard drive.  I use to download my card reader, copy it, and then download to a new folder on the external drive.  It will not work now and nor can I create new folders on the hard dr

  I used to download pictures from a card reader, copy them, and then stick it on my external hard drive.  Since El Capitan of download, it does not work - I can download and copy, but can not stick to the external hard drive.  I can't set up the files on the external hard drive either.  However, I can download what is already on the external hard drive without any problem.

  How the external drive is formatted?

• When will use Thunderbird extended MAPI and this change beeing worked on?

  As I said before in a previous question there some time, which i did not receive a response. Is this change in Thunderbird on a list of things to do? Yes or no

  If not please advise I have to change my e-mail program to one that supports extended MAPI.

  Best regards
  Gerry

  You have just one more question on this site.
  https://support.Mozilla.org/en-us/questions/997366 who asked on April 30, 2014 and answered 3 hours latter.

  So here we are with the same question these last 18 months.

  As Microsoft disapproved EMAPI and did not even he comes with recent versions of Windows. Thunderbird will not support this existing windows API.

  Thunderbird is compatible mapi and Toad hall you associate information about that last year.

  If you ask about a specific product such as MYOB product you referenced in your previous ad, your request in the wrong place. You must ask to MYOB. Where they will tell you they are only testing with Microsoft office outlook and nothing else. A quick look at their support forum will clear that other mail clients work and work well, but when they're not working just MYOB leaves.

  Previous topics on this forum that might interest you https://support.mozilla.org/en-US/search/advanced?q=MYOB & num_voted = 0 & num_votes = & asked_by = & answered_by = & q_tags = & product = thunderbird & created = 0 & created_date = & updated = 0 & updated_date = & sortby = 0 & a = 1 & w = 2

  MYOB support topics.
  MYOB Essentials
  http://MYOB.com.au/business/support/Essentials-support-search-1426984472384?q=Thunderbird
  Right of MYOB account
  http://MYOB.com.au/business/support/Essentials-support-search-1426984472384?q=Thunderbird
  MYOB Accountedge
  http://MYOB.com.au/business/support/Essentials-support-search-1426984472384?q=Thunderbird

  MYOB all
  http://MYOB.com.au/business/support/Essentials-support-search-1426984472384?q=Thunderbird

  Bugs filed in Bugzilla for Thunderbird MYOB related issues
  https://www.Google.com/search?q=MYOB+site%3Abugzilla.Mozilla.org & ie = UTF-8 & oe = UTF-8

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.

• In google maps, after seeing satellite or view, links on the map does not work, I have to charge google maps and start all over again

  When I open google maps, the links displayed on the maps can be used. However, if I change to a view street or satellite view and then return to the display of the base map, links displayed on the map is no longer working. I have to leave google maps and reload to get the links to work again.

  Hello peterronald, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• I installed acrobat reader in window10 and demoted to the 8.1 window. After downgeading 8.1, acrobat reader does not run and also do not uninstall and reinstall. Only, I get the error message. What should I do?

  I installed acrobat reader in window10 and demoted to the 8.1 window. After downgeading 8.1, acrobat reader does not run and also do not uninstall and reinstall. Only, I get the error message. What should I do?

  Hi soyoungl9536964,

  Please try to run the cleanup tool "Download Adobe Reader and Acrobat tool - Adobe Labs" on your machine to remove all traces of the reader.

  Then, restart your machine and install the latest version of the player from here:

  Adobe Acrobat Reader DC install for all versions

  Let me know if any problem will persist.

  Kind regards

  Christian

• I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up ever since I downlo

  I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up, since I downloaded the new version of Firefox. I want just the old version of this back because I can't download the Adobe stuff which is necessary to protect my computer against hackers apparently not. It would have been nice to know he had a problem with the new update of Firefox BEFORE I downloaded it. I have Vista, which is usually a problem with Adobe and Firefox. I don't seem to be able to run a lot of Adobe at all on my computer because of the Vista.

  This has happened

  Each time Firefox opened

  http://support.Mozilla.com/en-us/KB/installing+a+previous+version+of+Firefox

• Why windows media player is not reading my DVD, and how do I install windows media player decoder using my drive from windows XP Professional?

  Media player from Windows

  Why windows media player is not reading my DVD, and how do I install the windows media player decoder using my disk of windows XP Professional

  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder. And... He
  is not a DVD decoder on your Win XP Pro drive.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following freeware
  media players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Or... you can try to download and install one of the
  Following codec packs.

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates).

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Windows 2000 / XP / 2003 / Vista / Windows7 / XP64 / Vista64 / Windows7 64)

  (2) information on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (XP SP1 or more, Vista, Windows 7 - 32 bit - 64 bit)

  (3) Windows 7 Codec Pack
  http://download.CNET.com/Windows-7-Codec-Pack/3000-13632_4-10965840.html
  (2000/XP/2003/Vista/Server 2008 / 7)

  (4) Media Player Codec Pack
  http://www.mediaplayercodecpack.com/
  (Windows XP - Vista - 7)

  Good luck...

• Problem with simple reader of fingerprints and pass - can not connect with either

  When I try to log on my laptop, I get an error with simple reader of fingerprints and pass code. The code is "the service user profile Service does not have the connection. Unable to load the user profile.

  I tried to restart. But does not help. Can U help?

  Hello

  Check out the links below...

  The user profile Service has no logon

  Or,

  Try the microsoft fixit

• When I try to import multimedia an error reads "in QuickTime and or the appropriate codec does not appear to be installed."

  When I try to import multimedia an error reads "in QuickTime and or the appropriate codec does not appear to be installed."

  [moved based on duplicated... messages which I deleted... MOD]

  You try to make a DVD or Blu - ray (or both)?

  This absurd error with 2 exports that you describe. If Yes, provide the screenshot of mediainfo John queries.

• I read the TOU and legal; But I'm still not clear: if I purchase an image, may I use it in products for sale on Zazzle (POD)? Thank you.

  I read the TOU and legal; But I'm still not clear: if I purchase an image, may I use it in products for sale on Zazzle (POD)? Thank you.

  I really doubt that you would be able to take one of the images and add them to a shirt or mug etc and sell it unless you bought the extended license.

  This would fall under article 2.2

  http://wwwimages.Adobe.com/content/dam/Adobe/en/legal/servicetou/Adobe_Stock_Terms_en_US-2 0150313_hpc.pdf

• With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  Hello

  Here are the steps.

  Install a cable Audio virtual on your machine:

  http://virtual-audio-cable.en.softonic.com/

  Under HW Audio Configuration configured Virtual audio cable as default input device

  And value clock maser virtual audio cable and try reading.

  This issue with the message 'Audio material e/s overloaded at 00' can be fixed, follow these steps.

  Vinay