Facebook connection cut on the header at the top of the page.

Similar Questions

• Continuous display Facebook connection cannot display the page

  Can not connect to facebook for some reason any. Continues to show me the "page cannot be displayed". Everything opens as usual but... any ideas?

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  3. what browser do you use?

  If you use Internet Explorer 8 or 9, then refer to this link and follow the steps in the link below and check if this can help:

  http://support.Microsoft.com/kb/967897

  Otherwise, you can try to add the site to the security area and check to see if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/security-zones-adding-or-removing-websites

  It will be useful.

• I keep get redirected to google everytime I open facebook. who's who of the charges and allows me to connect, but once the page loads I get redirected to my homepage... can help all

  I keep get redirected to google everytime I open facebook. who's who of the charges and allows me to connect, but once the page loads I get redirected to my homepage... can help all

  Hi TonyHutton,

  1. what browser you use on the computer?

  2. did you of recent changes on the computer?

  3. only happens with the facebook site?

  4. do you have security software installed on the computer?

  Check if the problem persists on all other sites as well.

  See the link below and try them the steps mentioned, check if it helps.

  Difficulty of your web browser hijacked

  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

• Cannot connect to YouTube, the page will not load.

  I use version 28.0 and I cleared my cache, cookies and history of the browser. I can watch a video on Youtube, if a direct link and sometimes access to the site itself, but I can't log on my YouTube account. When I click on login, the page tries to load until I finally exit out of it and give up. After this point, I can not access the real YouTube website. I am able to connect to any other site, I've tried, including Facebook and my Gmail. I have no problem with this in my torch/Google Chrome or Opera browsers.

  I added Firefox on my programs that can both through Windows Firewall and have run Malwarebyte scans s, Windows Defender, and SuperAntiSpyware. What can I do to fix this? Y at - it a plugin that I missed resettlement, because I had to uninstall and reinstall Firefox from scratch recently, or is there something else I'm missing?

  The problem seems to have resolved itself somehow. I didn't do something different after trying to solve this problem, far backward at the beginning and running a couple of analysis between the two then and now you can find the usual cookies of my sites which had been cleared when I complained about this problem in the first place. I really hope that it does not start again.

• Photosmart 6510 straight cut of the page

  Hello

  I'm on a macbook with OSX 10.5.8 with a Photosmart 6510.

  Installation went without problems, but when the right side of the print documents are cut despite the margins are the same on all sides.

  Subject of PDF, it seems as it should, it is not simply print as it should - miss me the right +/-1 cm from the paper.

  PS

  Also I would like to print aligned in the Middle, which - however - perhaps a Preview of Mac problem. However, ideas are welcome...

  I already tried all these things, but I discovered as the duplex unit being a little strange ITMIS. I noticed that it cropped only the last printed page - so I just added 2 empty pages at the end and it worked.

• My page is printed too high. When you print the report of diagnosis of iMac, top of page letters are cut off the page

  I have a hp c310a all-in-one.  When you print cd labels, graphics look good on preview before printing, but when it comes to the printer off, the graphics are about 1/4 "too high, which leaves the low" 1/4 of my blank cd label.  I printed a report of quality Diagnostic print from my mac and it came out too high.  Cut the top of the report, it began printing until the paper is correctly positioned.  When you print the Diagnostic Report of quality printing directly from the touchsmart on my printer screen, the report will print very well.  I wonder if there is a setting miss me when I go on my printout.

  Hello

  This really sounds like a parameter of the wrong paper on the computer, type or wrong size setting can cause these issues, especiallly it seems to work perfectly when printing directly from the camera.

• Automatically loads the page with https

  Firefox will automatically load the following sites using https

  If I type in
  cgets.com

  It automatically goes to https://www.cgets.com

  If I type in
  Google.com

  It automatically goes to https://www.google.com

  Why is this and is at - it a way to stop if to do this?

  Current version of Firefox may prefer a secure connection if you have never used a secure https connection to visit the pages on a Web site.

  Try to set the Boolean browser.urlbar.autoFill false pref on the topic: config page.

  • http://KB.mozillazine.org/about:config

  See 'Prevent Firefox to automatically complete URLs':

  • https://support.Mozilla.org/KB/search-your-bookmarks-history-and-tabs-awesome-bar

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• Blade tool precision is off, not cut on the read head

  When you try to cut (using the CMD + B tool or a blade to cut the read head) it's offset Cup at the beginning of a block of gray 1 second at the place where the playhead is actually.

  How can I get the tool of the blade to cut on the head rather than be compensated?

  Here's a screen shot where I got the cut occur (as directed by the read head)

  Here's a screen shot where the Cup is happening really (at the beginning of a block of 1secondgrey in the timeline)

  Here's a quick GIF of the problem thus:

  

  You zoomed with so you can see the video images individually. It is not possible to cut in a single video frame, it is possible to cut at the level of framework sup with audio.

  Russ

• Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

  If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

  Best regards

  Q

  Hello

  It may help to place your watch in mode do not disturb before driving:

  -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

  You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

  -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

  To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

  https://www.Apple.com/feedback/watch.html

  (This is a supportive community focused on user - you don't talk to Apple here).

• short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

  short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

  There may be some problems that repair tools are not picking up. It may be preferable to a repair facility. This can help with any corruption of the registry, which could happen by the deletion of these programs. http://support.Microsoft.com/kb/917964

  Keep in mind when running all that modifies the system it is always a good idea to have your data and backup programs (it's general advice for any system its always good to have a backup in case of possible failure of material/virus)

• If my connection interrupted by the ISP, my connection broadband (PPPoE) on my windows 7 freeze and it does not cut, and he does not answer to disconnect click.

  If my ADSL connection disconnected by the provider of the connection on my computer freezes instead of disconnect!

  As the title suggests, if my connection interrupted by the ISP (for example: Internet service provider who use dynamic IP automatically disconnects after 24 hours permanent connection), my connection broadband (PPPoE) on my windows 7 freeze and it does not cut, and this isn't answer to disconnect click, even if I uninstall the Ethernet card, keep the connection.

  Everything else works fine, and the only way to connect to the Internet is to restart my pc.

  Also if the connection is disconnected due to a traction cable or ADSL Modem power connection broadband (PPPoE) on my PC disconnect normally without any problems and I can reconnect without any problem.
  any help with this.

  Hello

  PPPOE software th whole arrangement never worked well from the first day more than 10 years regardless of the operating system.

  So most serious DSL carriers actually give free Modem/Router so that authentication would be by the side of the router WAN.

  They give it for free for phone support for this problem cost them more than the $10 adds the router to the Modem

  For example, get a router, simple routers in the United States are sold for less than $15.

  Router solved the problem PPPOE provides, security with NAT firewall, and stream DSL is actually faster than with authentication of software.

• My computer does not connect to facebook, it keeps displaying the message "a connection expires", how fix this?

  Whenever I try to access facebook.com, I get a message telling me that there was a problem loading the page, the connection has expires. This only happens with facebook. How can I fix?

  Hello

  Thanks for posting your query in Microsoft Community!

  I see that you are facing problems accessing Facebook.

  Do not worry! We're here to help.

  Quick questions:

  1. which version of Internet browser are you using to access Facebook?

  2 is the issue limited to Facebook?

  3 did you changes to the computer before the show?

  4. What is the full error message?

  Come back with more information so that we can help you better.

  If you are using Internet Explorer Please refer to these methods and check:

  Method 1:

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the in the Windows registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry

  You can try the steps from the following link and check if it works:

  Internet Explorer error "connection timed out" when server does not

  http://support.Microsoft.com/kb/181050

  Method 2:

  You can try to optimize Internet Explorer and check to see if that fixes the problem.

  See this link for more information.

  How to optimize Internet Explorer
  
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance
  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  I hope that helps!

  Come back with more information so that we can help you better.

  If the problem persists, or you need help with Windows, please keep us informed.

  We are to help you.

• Whenever I connect to Facebook my computer starts freezing, running slow and window pops up saying there is a script running on the page.

  Original title: another scrpt running on the page

  whenever I log in Facebook my computer began to freeze and sometimes throws me completely. If not, it runs very slowly and window pops up saying that a script is running on the page which is the origin of the page to run slowly and can freeze your computer, press Yes to continue.how can I get rid of this

  Hi Eva,

  1. what web browser do you use?

  2. What if the problem occurs with all the site or it confined to Facebook?

  3. did you of recent changes on the system?

  Method 1:

  If you use Internet Explorer, you can view the following items and check if it helps.

  How to resolve script errors in Internet Explorer on Windows computers

  Error message: "a script on this page slows down Internet Explorer runs slowly.

  Method 2:

  You can also try the steps in the following link and check if this solves the problem.

  How to optimize Internet explorer?

  Hope this information is useful.

• iPod touch will not got to some Web sites - "Safari cannot open the page because the network connection has been lost."

  Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:

  S afari cannot open the page because the network connection has been lost.

  The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.

  No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.

  I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.

  Thank you!

  Not "no matter where I am," means, it happens with all networks?

  If so:

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.