Failback and database of CA backup without the tunnels down server?
Hello
We implement DMVPN in a PKI environment for authentication for better security.
I installed a server scenario and the customers of CA in the LABORATORY and it works very well. I am aware that we can save the database on the external media or server.
Now if my main or primary CA server fails, the certificate database will be unavailable until I have manually import those certificates to the router and until then my peerings all will be down (am I right?).
I would like to install 2 routers as CA servers. a 1st acting as main server having a public IP and the 2nd will be backup in case of failure of the primary. But I would like to first of all this as an automated where the backup that failing 1 router will resume immediately without the tunnels down.
Is there a way we can do that? All those put in place this design before? Help, please.
Thank you
Deepak
My design is such that there will not be "pre-shared keys" and only "PKI".
It is the main purpose of a PKI installation... ;-)
So in this case if peers have already established the connection to other peers and the CA server goes down then they will not go down, is that correct?
right. The IPSec peers interested in CA cert has to be registered or the CRL should be checked.
Also what is the configuration command to allow the connections if the CRL can't be loaded?
Crypto ca trustpoint YOUR_TRUSTPOINT
crl revocation checking no
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni
Tags: Cisco Security
Similar Questions
-
where can I find my document saved that I worked from an e-mail, and then saved using backup on the Word icon?
Here are two things to try:The file is saved in the Temporary Internet Files folder. To locate the path, open the attachment to new then, and now Alt, press F, and to open the Save as window. In the save window slot, right-click on another file in the list, and then click Properties. On the general tab, copy the full path to the location. Then, open a Windows Explorer window and paste the path copied into the address field. This is where the edited file was saved.Since ChristmasCopy this line:
Search-MS:DisplayName=temp%20Files&crumb=ext%3AZZZ*&crumb=location:shell:cache%5CContent.IE5
Now press Windows-E, Ctrl-Alt-D-V
ZZZ change to the extension of the file you edited, and then press enter.
This should show all the recently saved files in temporary Internet files with this extension. Good luck!
PS Si the file is, please copy in your documents folder before anything else. Open the copy to work.
-
? I have Adobe Photoshop elements 12, my computer crashed and I bought a laptop without the DVD disc, how can I install my product on my new computer?
Download/install and use your serial number of the disc to activate it.
PES 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
-
I typed the wrong user name and now it comes up in the drop-down list. How can I get rid of him?
This has happened
Each time Firefox opened
== I typed the wrong name.
Delete a saved here password: Firefox > Preferences > Security: passwords: "saved passwords" > "show passwords".
See Password Manager - don't forget, delete, modify and import passwords saved in Firefox
---
http://KB.mozillazine.org/Deleting_autocomplete_entries -
Apex can work without the oracle application server? How?
My question is exactly what the title says.
Apex can work without the Oracle application server?
I heard that there need a webserver to work but not necessarily the oracle application server.
Is this true?
With ONLY apache installed apex can work on it?
Thank you
Don't forget to assign points to those who help you! (Mark the thread useful/correct)
My home page
Best regards
Published by: Igor Carrasco on May 29, 2009 14:59
Published by: Igor Carrasco on May 29, 2009 14:59Hello
Take a look at the Setup Guide that covers all the different options you have (as there are a some variations).
http://download.Oracle.com/docs/CD/E14373_01/install.32/e13366/TOC.htm
But yes, in short, you can have a configuration where there is no external Web server that uses the embedded PL/SQL gateway.
Hope this helps,
John.
--------------------------------------------
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone! -
"Unidentified network".
Hello, today I tried to connect to my friends wifi with my laptop, including wireless I use it for a month now and its impossible! Down right it shows only 2 blue screens without the World Cup, and he said "unidentified network"! I tried several solutions, I found online as 'install the protocols Internet 4 and 6', make sure that I have the ip auto get same restore point system and safe mode with network! Nothing works... my friend connects with his laptop and I can connect with my smartphone, except my laptop! I have windows vista... Please help me thanksGo to: Control Panel, Manager of Devic, adapters to extend your network, click with the right button on your wireless network and click on uninstall.
Do not put a check in the box: remove the software driver for this device.
Restart your computer and Windows will install your wireless network.
If the problem persists, see if your computer manufacturer has an updated driver.
These articles may help:
-
RMAN-06025 and double standby: no backup of the log 1 thread
Hi all
I use oracle 10.2.0.3.
I tried to make a duplicate of standby restore/recovery
from a band. The duplicate takes about 15 hours. So, upon arrival
I got the following error:
Well,.Oracle Error: ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below ORA-01194: file 1 needs more recovery to be consistent ORA-01110: data file 1: '+DATA/PROJ/datafile/system.346.764664523' released channel: c1 released channel: c2 released channel: c3 released channel: c4 released channel: ac1 released channel: ac2 released channel: ac3 released channel: ac4 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of Duplicate Db command at 10/28/2011 01:19:11 RMAN-03015: error occurred in stored script Memory Script RMAN-06053: unable to perform media recovery because of missing log RMAN-06025: no backup of log thread 1 seq 35000 lowscn 74343144157 found to restore . . .
The duplicate database is restored. It remains only the archivelogs.
If I try to backup all archivelogs again and to run the double once more,
The data files already restored are underwritten, or RMAN ALL restart again, RESTORE
ALL DATA FILES?
The database has 600 GB. So, if I start again, it's a big problem.
What can I do to fix this?
Thank you very much!!!This is an Enterprise edition? Have you configured in Eve and dataguard on primary configuration?
Which command you gave to duplicate?
RMAN > target database duplicate for standby?then start MRP from sleep mode: -.
SQL > recover database managed altert disonnect waiting database session;Main post office: -.
Select the code from ds.dest_id
ad.status
ds.database_mode db_mode
type ad.archiver
ds.recovery_mode
ds.protection_mode
, ds.standby_logfile_count 'LAR '.
Active ds.standby_logfile_active
ds.archived_seq #.
v $ archive_dest_status ds
, announcement of v$ archive_dest
where ds.dest_id = ad.dest_id
and ad.status! = 'INACTIVE '.
order by
DS.dest_id
/The duplicate database is restored. It remains only the archivelogs.
If I try to backup all archivelogs again and to run the double once more,
The data files already restored are underwritten, or RMAN ALL restart again, RESTORE
ALL DATA FILES?
The database has 600 GB. So, if I start again, it's a big problem.First thing is that you can make two copies because the database is already mounted...
Why you want to restore again?Just start MRP and post if no errors.
-
Looking for a backup initiated from my iPhone 6 s +. Needed to leave before it's over, so I typed "cancel backup' which doesn't seem to work. Six hours later the wheels always turn around. Message on the screen said "Turning on Backup" - it turns also around and the screen seems frozen I can't return to set after I selected "iCloud" How can I fix it?
Have you tried to restart the phone.
-
XP Home Edition Backup without the XP CD
I want to backup my computer Dell with XP Home Edition, but did not have the XP CD because the operating system has been installed when I bought the computer. Windows instructions indicate that you need the CD to download the backup program. Backup can be downloaded online or y at - it another way to easily backup your computer to an external hard drive?
Saturday, January 22, 2011, 20:50:42 + 0000, RobertJabow wrote:
I want to backup my computer Dell with XP Home Edition, but did not have the XP CD because the operating system has been installed when I bought the computer. Windows instructions indicate that you need the CD to download the backup program. Backup can be downloaded online or y at - it another way to easily backup your computer to an external hard drive?
If you do not have a XP CD, you can download Ntbackup.msi to
http://www.onecomputerguy.com/software/Ntbackup.msi See also
http://support.Microsoft.com/?kbid=302894However, XP's built-in backup program is a very bad choice, in my
view. There are a lot of choices and the one I recommend is
Acronis True Image.Ken Blake (MS-MVP)
-
I lost my router user name and the password and reset does not have without the router
I haven't used my router wireless of Linksys WRT54G v5 for about 1 1/2 years and he needs now to a new place.
I put a username and password I forgot for a long time for access to the web according to the security protocols for the modem and I lost the disc for the program control protocol.
I tried pressing the reset button to clear the modem and it took the WPA Protocol off the power to the modem, so I can use it without any security, but this isn't a good thing.
Help! How do unlock it so I can get to the security protocols and put back the security on my modem?
StephanieD wrote:
I haven't used my router wireless of Linksys WRT54G v5 for about 1 1/2 years and he needs now to a new place.
I put a username and password I forgot for a long time for access to the web according to the security protocols for the modem and I lost the disc for the program control protocol.
I tried pressing the reset button to clear the modem and it took the WPA Protocol off the power to the modem, so I can use it without any security, but this isn't a good thing.
Help! How do unlock it so I can get to the security protocols and put back the security on my modem?
To release your router to your previous settings.
RESET the router the button is @ the back of it.
Connect a computer to one of the ports numbered on the router.
Access the UI of it http://192.168.1.1
User name: (BLANK)
Password: admin (all lower case)
-
Choose the value of the selection list and value come into text without the refres field
Hi friends
I want to like this link
[http://htmldb.oracle.com/pls/otn/f?p=33867:1:3985649502490025:NO]
When I select the emp name then use should come without updating to the text field.
should what code I apply for this...
How can I do this...
Thank youGood JS code below
Also change OnDemand as follows
htp.p(ad_rs ||':'||t_in); -- exception handling added exception when others then htp.prn(sqlerrm); end;
Concerning
Published by: Dominique on August 17, 2010 18:01
-
Need for reports and the analysis down server move to a different server
I lost my original for RA and re-installed server components on another server, however, when I try to access the workspace site, I get the message * "did not find a server Hyperion Reporting and analysis 'former name of the server running" at the port of 6800. Please check your connection string server and confirm that the server is configured. *
I re - run the Setup and configuration without result. Is there a configuration file that I have to update somewhere?This essentially means that the HSS register always points to the old name of the server for the RA_FRAMEWORK component. You will need to check through the report of registry if there several instance of the RA registered (one with the old server) framework and the other with the new server. If Yes, you can remove the old a registry through the epmsys_registry command line tool and reconfigure with the new server.
If you need help with the same, if it please raise a SR with Oracle support and should be able to guide you through.
-
Dynamic links - need a solution without the intervention of server
I am looking for a solution to my shortcuts. I'm trying to make it dynamic.
Restriction: I have not and I have no authority to server but I can possibly able to run a script in my Department on each computer.
I've been looking at things such as mklink and folder redirection, but they seem to do something on the server.
for example
I have a file that found in
\\SERVER01\Data\ENGINEERING SERVICES\NEW Z Drive\Current Products\Subassemblies\Under Review\SUB835 FT128 Ext termination Board\Work Instructions\Document Control - SUB835B - SUB836B.docx
If the path is passed to (\NEW Z Drive deleted):
Products\ \\SERVER01\Data\ENGINEERING SERVICES\CurrentSubassemblies\Under Review\SUB835 FT128 Ext termination Board\Work Instructions\Document Control - SUB835B - SUB836B.docx
the shortcut to the file of control of records - SUB835B - SUB836B.docx would have been lost.
also if the control of records - SUB835B - SUB836B.docx has been moved to \Subassemblies the link would have also been broken.
Is there another way?
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
Hope this information helps.
-
Creating a database from backups of the production test
Hello Experts,
I'm a newbie with a lot new in Oracle. I got the backup inc0 (which includes even backup controlfile) (PROD) production base taken by RMAN and asked to create a new test database (TEST) by using the backup. Can someone please give me the steps on how to restore and create the new database?
The 10.2.0.4 basic version
I am aware of the concept of duplicated with RMAN database, but I was asked to do not connect to the target (PROD) database while duplicating. So, I need to create the test database using the prod database backup without being connected to the PROD database. Please guide me.Refer
http://arjudba.blogspot.in/2008/05/restore-and-recover-database-to-new.html
RMAN restore database from another backup of the different database nameWhen you perform a restore using backup of the production database, the db_name would be same on the auxiliary database. Once you restore and recover the database in your test server, you can change the prod db_name to test by recreating the controlfile
-
What is the difference between a backup of the plant and a recovery disk?
For me a simple question, so I hope a simple answer.
When I got to my laptop that I created a USB using DBR recovery. It is a little more than 8 GB in size and is appointed SYSRECOVERY.
At that time there I didn't create a backup of the plant.
Having recently been read on things related to the re-establishment of a system in case of disk failure hard etc, I saw that Dell has said you must create USB recovery media and a backup of the plant. So, I got a new USB and today created a backup of the plant.
Looking at it, it is also called SYSRECOVERY and both have exactly the same list of files and folders and have almost the same size.
So just what is the difference between these 2 options (if any)?
Or do I now have 2 USBs that will do exactly the same work to restore my laptop computer provided that the factory?
Case there is no difference, why Dell offer both (and recommend you create both)?
Thank you
Technically speaking a recovery media and backup of the plant are the same. But according to the post that you saw at Dell, recovery media is a backup of backup from the factory with the files and applications that you added later. Therefore, to be on the safe side, Dell recommends to create a backup of files and software that have been added later (or is not part of the default configuration).
The factory backup contains all drivers and software according to the configuration of the PC, and that were pre-installed on your computer.
Generally, Windows failure, you can use factory backup media to restore the PC without affecting your personal files and software. In the event of hard disk failure, where the hard drive is replaced, recovery media will be useful to restore Windows as well your files and applications.
Maybe you are looking for
-
By clicking under Firefox in the bar of tools does not work
I have to go to 'open the menu' and click on the quit button to exit firefox. I have a macmini and problem seems to coincide with the installation of the operating system to El Capitan.
-
I went to iCloud and attempted to install to my PC iCloud. When given the choice of repair or remove iCloud for my PC, I didn't know which one to choose. If I choose to delete, all of my items to iCloud disappears from my PC?
-
I have a computer comes with a Vista disk to the Windows Welcome page and now have acquired another (employee) computer that has Windows XP, service pack 3 on it. Can I take the Windows Home Vista disc and put it in my computer that has Windows XP
-
HP Deskjet 1010 is stuck to remove
My new HP Deskjet printer is stuck in the remove mode. Does not print. Even if I try to erase Quebec by canceling all print jobs, it remains blocked to remove. I've erased successfully two times and then tried to print something and he went immediate
-
I bought a new computer and I get this error message. I can't speak to the seller until Monday and I have no disc to re - start. Any ideas?