Failed to create a mask on the adjustment layer

Similar Questions

• PROBLEM OF TRACKING MOVEMENT WITH THE ADJUSTMENT LAYER

  Hello.

  I'm trying to fade a logo on a shoe, but I have some difficulty to get the tracker to stick on the logo.  Can someone help me, please.  Here are the steps I took:

  1. I used Tracker to follow a logo I want to fade.

  2. after the analysis of the layer, I went back to check the anchor the anchor is perfectly centered on the logo on each image frame by frame.

  3. then I added an adjustment layer and used the pick whip to ensure that the position of the adjustment layer is the same that the position of the tie of the tracker.

  4. on the adjustment layer, I created an ellipse mask, apply a Gaussian blur.  But when I read, the mask of the ellipse is all over the place and don't stick to the logo.

  Someone has an idea what I am doing wrong?  Any advice would be appreciated.  Thank you, in advance.

  2010 mac Pro.  After Effects CS5.  Snow Leopard 10.6.6.

  To start, I always apply tracking to a null data, then parent set to null for layers that must follow the trail.

  Make sure that you have chosen the right target. Make sure that you chose the right options. You should use Transform like track type. You must also do a quick search on Google. There are a lot of tutorials out there for follow-up.

  If your null value follows the object, then you can parent the null value adjustment layer. That should do it.

• How to duplicate a layer and then change the adjustment layer?

  This used to be easy to PS7, but he is evasive in CS4. Sometimes we need to duplicate a layer, then change the adjustment layer. For example, we may have selected a portion of an image and used the brightness contrast and then we need to create a new layer using the same section using selective correction. What we have done in the past, is to duplicate the layer, and then change the adjustment layer. Any ideas?

  Create your new adjustment layer. Option drag the mask layer on the new original setting, and then choose replace.

  Beware of the many similar masks:

  http://www.teddillard.com/2008/10/Geekzone-rosenholtz-Sanchez-effect.html

• Layer masks, and vector masks on the same layer

  Hello guys,.

  It's maybe a stupid question, but I'm unable to understand this one...

  If you make a selection on a layer and click on the button of the mask, you create a mask...

  But if you press the button mask once more, Photoshop puts a vector mask to this layer,

  right next to the layer mask.

  To be honest I couldn't do much thing with this vector mask, I've experimented with it, but I just

  cannot know, how it interacts with the layer next to her mask (if there is interaction that is).

  Can someone help me understand please?

  What is the ease of use to have a vector mask next to a layer mask on the same layer?

  An explanation with a paradigm would be nice!

  Thanks in advance.

  Hello

  They both hide the image. One will be based pixel, other vector editable. Here's and example of round soft mask on Mona combined with a mask vector hard sharp (on top a still life by Frida!)

  How you can use it, it's you.

  

• Photoshop Elements 9 - cannot use the brush in the adjustment layer

  Hello

  I am new to Adobe Photoshop Elements and have recently purchased Elements 9. I have problems with the brush in the levels of adjustment.

  I opened a RAW image and converted to black and white to desaturate using an adjustment layer. I then try to adjust the black and white image using several levels of adjustment. I use the brush to hide parts of the image in the particular adjustment layer I don't want to change. It worked at first, but for some reason, the brush stopped working in adjustment layers. It's a soft brush the 300px value, mode is 'Normal' and the opacity is 100%. In other words, is not obliterate anything in the layer, or whatever it is appears in the thumbnail of the rightmost (these two things happened before)

  The brush works normally when you adjust an image with no level i.e. When you simply open a RAW or TIFF file and use the brush.

  I tried to uninstall the program and reinstall it, but the problem persists.

  Can anyone offer any help? It's frustrating because I can't adjust my image selectively. I do something wrong, it is a bug, or is it just a simple matter of checking a simple box somewhere in the pre-series?

  Hoping someone can help.

  Make sure you have your brush set to black (foreground in black color)

  and that makes your painting on the layer mask (click on the layer mask

  to make it active).

  Try just paint on the mask of your adjustment layer to desaturate the photo

  with a black brush (color to come back)

  Sometimes with several adjustment layers, strokes on a layer mask can overlap

  the strokes on the other.

  If you want more control over a black and white conversion, you can try something like

  What follows.

  1. Add a hue\saturation adjustment layer and change the layer blending mode to color

  2. Add another layer of setting hue\saturation and move the saturation to-100

  3. on the first adjustment layer (the one with the color blending mode), move the hue

  and saturation for different effects, black and white cursors.

  4. If you want to add a color tint, set the hue\saturation albums layer colouring and

  Adjust the sliders hue and saturation for effects of different hue.

  

  

  

  MTSTUNER

• Exclude the track (s) of the adjustment layer

  Hello world

  I use Premiere Elements for many years and am now test Premiere Pro to make the Decision to change to pro or not weather.

  So I try a few things and have mor than one question

  1: I wonder if there is a method to bind an adjustment layer to specific and not too ALL titles follow below.

  Problem: Using the green screen images and make the entry in the adjustment layer (because the film changes with every project, but the entry parameters are always the same - so an adjustment layer is ideal to keep the settings) means that the effects of adjustment layer of her down the track with background images that I want to insert. So I'm looking for a method to warn the adjustment layer one who tracks it has to work on... and which should not.

  Is this possible? and how?

  2: in Premiere Elements I liked the simple way to insert a fade-in or melted to the video and audio tracks just right click on the item in the Assembly of witch and then choose 'Add Transition' with the options "Audio fade-in ', 'fade-in video', 'Fade Audio', 'video Fade-out' that adds the length preset for transitions to the clip. Tool me about one second.

  In Premiere Pro I cannot find this feature in the list right click options. So, I really need to I add each fade in and fade-out manually by using the effect options and setting keyframes manually from 0 to 100? Seems odd that Pro is less intelligent than the elements...

  Or how to do that in Pro?

  3: in the window "Export media" I struggle with the adjustment that will be made, which means that litte drop-down menu with 'all' or 'working space' - I hope you know what I mean?

  Problem: This setting always jumps back on 'working space', even if I used the last time that "everything." And 'all' is the way I went my projects to 99%. So I wonder where I can edit the preset of this option to 'all '.

  Thanks for your help in advance!

  Kind regards

  Lutz

  1 No., the key effect does not work on an adjustment layer, it generates no alpha channel.

  It must be on the clip, but you can save the settings as a preset.

  You can't say to an adjustment layer which layer to use when they are stacked at the top.

  2. in the preferences, you can set the default length of transitions.

  The default transition is Cross Fade, for constant power audio for video.

  3 workspace is the default when you use the work area bar in the timeline.

  If you put default WAB to the output sequence.

• Problem with 'Create new Extrusion of the selected layer' CC 2014

  Hello, I am experienced with Photoshop but I'm new to 3D text in Photoshop.  I type the text and convert it to a form.  When I choose to create new Extrusion of the selected layer I get the dialog, I don't see in tutorials.  It says "you are about to create a 3D layer.  You want to switch to the 3D workspace?  Yes/No, do not display again. "Which one should I use for the 3D text?

  If I choose Yes, all the panels disappear and the content in the tool options bar (Ribbon?) just under the menu bar disappears.  I have to restart Photoshop to get back on the tool options.  What could I do it wrong?

  Thanks - Dave

  I just chose 'No' and don't look at back.  I love my workspace, just as it is and doesn't prefer Photoshop to change for me in this case especially.

  You bring up the 3D Panel yourself via the window - 3D.  I think it's a good alternative for the Actions Panel, because I don't have any currently working in the 3D world.

  You'll want to see easily if you are working on 3D are 3D Panel and panel properties, among a few others.

  Regarding return your workspace as you like it...  Note the small switch near the upper right of the main window of Photoshop.  That can be used to select a workspace.  I suggest that you experiment and familiarize yourself with the concept of workspaces.  You can set your own and save it with a name, and that can really be useful.

  -Christmas

• Crossfade of the white frame to the adjustment layer doesn't work more in 2014 CC

  Windows 7, first Pro CC 2014

  I have a video clip in a sequence, nested on a layer of setting on the V2 and V1.

  I want to dissolve a white frame on the clip using the adjustment layer.

  In CC PP (not 2014), it was simple:

  Beginning with a white PNG on V2, melted chained to the adjustment layer.

  However, in PP CC 2014, this causes a fade to BLACK for the duration to dissolve, then a CUT to video.

  This behavior in 2014 CC is illogical. Why has it changed?

  There are other ways to do this, but it was quick and easy and is required for hundreds of clips in existing scripts / projects.

  Support by live chat response:

  Thank you for your patience

  the adjustment is layer does not work properly

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform & loc = in

  Fill in the application form for feature/bug

  No Yes No problem.

  Turn off GPU and see if that makes a difference.

• Apply the adjustment layer to a layer group

  Is there a method to apply an adjustment layer to a layer group?

  I have a curtain on a layer of a Photoshop CS4 document.

  I have reproduced the curtain twice and repositioned the copies.

  Now, I would like to use an adjustment layer to change the color of my curtains without affecting the rest of the composition (and I can't move the curtains down because they need to sit above other elements).

  I tried to bring my 3 layers of curtain set, then applygin an adjustment layer > hue > colorize - but that affects the entire composition.

  When the layers are grouped, holding ALT while hovering between the adjustment layer and the group does not have the special icon that allows you to apply the adjustment to the layer below.

  Would be apprecaiate andive on how to apply an adjustment layer to a layer group.

  (I can go back and apply my adaptation to the original curtain can reduplicate and reposition, but would have to repeat this procedure every preference change color).

  Thank you?

  Put your layers into a folder and change the mode to normal fusion of records through. You can then put an on the top layers adjustment layer in the file, and this will not affect what is located in the folder.

• Masking of the scale on the adjustment layer issues

  Hi all

  First of all I'm new to Premiere Pro. but I ran into a few problems that resemble bugs for me.  But if someone can put me right I would appreciate it.

  For example, I have a static image on a layer, revised downward to more small as the size of the total composition.

  I have an adjustment layer on it with an opacity mask, subtract blending mode, reversed.  The resulting crop all away from my picture out of the mask.  So far so good.

  If I then add keyframes to the scale of my image, I get a zoom effect, while the size of the image is the same (the size of my mask), that's what I want to achieve...

  However, a further review, there is a very faint line that shows outside of the mask, expanding outwards, which seems to be the contours of the image unmasked.  :-(  That is the number 1 issue.

  If I also add keyframes for opacity on the image, at the same time, I have a weird effect, almost as if the mask is ignored, because the image grows and becomes more opaque, but then finally catches up with the mask.  Almost as if, opacity, scale, and hide is just too much for the program to process.

  I tried rendering the project, but both of these issues show on the finished film.

  While experimenting with ideas to try to overcome the problem I also tried the feathers at the edge of the image... but giving still more bizarre results, with the edge to feathers, showing outside the masked area.

  Suggestions as to how I can get the result of desire would be appreciated.  (Who is to have an image, most smaller than the whole of the composition, but that remains the same size, zooms.  I would also like to be able to fade in).

  Thanks for reading and I look forward to your comments.

  Tim

  Running first Pro CC 9.1.0 (174)

  Mac OS X El Capitan 10.11.1

  27 "iMac

  3.2 Ghz intel core i5

  16GB 1600 Mhz DDR3

  NVIDIA GeFprce GT 755M 1024 MN

  Whenever I have similar problems, they are usually resolved by nesting the clips to force the order of effects.

• «FAILED: failed to create a snapshot of the source volumes VSS.» Error code: 2147754758 (0 x 80042306). "Down to 1% with autonomous converted 5.5

  Hi all

  I'm trying to convert a physical Windows 2008 R2 (SP1) virtual, using Vmware vCenter Converter Standalone version 5.5 build 1362012, it fails at 1% (after around 40mins) with the following message

  Failed: Failed to create a snapshot VSS of the source volumes. Error code:
  

  2147754758 (0 x 80042306).

  
  

  Windows systems has some LUN (4 x each various size GB) San, being the GUID (GPT) Partition Table.  I went through the wizard as a general rule, by selecting "edited on the machine", a player selected vmware "vmware workstation" or another vmware virtual machine destination 6.0.x and the location of the target being a LUN with 500 GB of space.

  Now for the data to be copied I selected 3 LUN (on a database resides) and put the 'Size' option (but I tried to keep the size of the various passes) to save space.

  
  

  Looking through the logs, I see the following errors

  Server-convert-VMware - 1.log

  2014 01-16 T 19: 42:37.371 - 07:00 [info 08696 'Default'] [serviceWin32, 416] Server vmware-converter service started

  2014 01-16 T 19: 42:51.006 - 07:00 [08696 info "Libs"] username [ADS] Get failed: 1332

  2014 01-16 T 19: 42:51.006 - 07:00 [08696 info "Libs"] [ADS] subtle failed: 1312

  2014 01-16 T 19: 42:51.115 - 07:00 [info 08696 'Default'] [user, 874] successfully authenticated the user administrator of the local computer (by using pipe)

  2014 01-16 T 19: 43:38.898 - 07:00 [10116 info "Libs"] username [ADS] Get failed: 1332

  2014 01-16 T 19: 43:38.898 - 07:00 [10116 info "Libs"] [ADS] subtle failed: 1312

  2014 01-16 T 19: 43:39.023 - 07:00 [info 10116 'Default'] [user, 874] successfully authenticated the user administrator of the local computer (by using pipe)

  2014 01-16 T 19: 43:39.647 - 07:00 [info 07628 "ThreadPool"] Thread has enlisted

  2014 01-16 T 19: 44:26.152 - 07:00 [08696 error 'Ufa.HTTPService'] cannot read the request; flow: io_obj p:0x0141b84c, h:-1, < tube "\\.\pipe\vmware-converter-server-soap" >, < pipe "\\.\pipe\vmware-converter-server-soap" > >, error: class Vmacore::TimeoutException (operation timed out)

  2014 01-16 T 19: 47:32.

  Worker-converter-VMware - 1.log

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 "Default"] disk number 1 has been ignored due to errors when reading partition table

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 "Default"] disk number 1 has been ignored due to errors during playback of dynamic disks header or LDM database is corrupt

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] [MoveActiveDiskIfNeeded] GetFirstBootDisk failed, error mntapi: 176

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] score: Invalid magic number sector.

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] score: Invalid magic number sector.

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] [PopulateCapabilities] based on the Volume of cloning has been disabled due to: no volume is recognized >

  ..

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 "Default"] Partition: ERROR: MBR sector must be present and valid initialize to GPT disk.

  2014 01-16 T 19: 47:34.354 - 07:00 [info 07248 'Default'] signature of disk found 80a2884a-05e9-4c1b-81-3d-35-1b-a3-6c-4b-bc, drive to 225981112, sectors 512 sector size size

  2014 01-16 T 19: 47:34.354 - 07:00 [info 07248 "Default"] Partition found type Efi system / single 4078aaff-430e-4825-bf-07-67-c6-ab-a1-87-3f

  ...

  2014 01-16 T 19: 47:37.365 - 07:00 [info 07596 "ThreadPool"] wire removed from the list

  2014 01-16 T 19: 47:37.412 - 07:00 [10164 info "ThreadPool"] Thread has enlisted

  2014 01-16 T 19: 47:37.459 - 07:00 [info 07696 "Default"] MNTAPI: mounted volume \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.584 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.677 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.755 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.849 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.942 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:38.052 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:38.098 - 07:00 [10164 info "ThreadPool"] wire removed from the list

  2014 01-16 T 19: 47:38.098 - 07:00 [info 03736 "ThreadPool"] Thread has enlisted

  I wonder if the converter is not able to work on the GPT partitions?  (I think I saw some discussion of the community on this problem using v.5.1, but using 5.5 should be resolved?)

  Any help is appreciated. Thank you

  Your problem is with VSS, it is probably the lack of space, to seek solutions and similar problems.

  Errors that you see are expected, we need a full newspaper bundle for investigation and don't warry on GPT disks, they are supported with converter 5 +.

• Failed to create database link when the password has a special character

  I am trying to execute the following statement in sqlplus
  
  create alpha link database to connect to scott identified by tiger! using "db_alpha".
  
  Note that the password of the account has an exclamation mark inside. the command fails. I tried to put the password in quotation marks (') and double quotes (""). Working the double quotes, but then the link does not work properly.
  
  We are required to have a special character in our passwords... so, how can I get this special character in the password for the database link?
  
  Thanks in advance,
  Darren

  Darren2 wrote:

  #2 attempt:

  SQL > create database link BLAH connect to user2 identified by 'tiger!' using 'BLAH ';

  Created database link

  SQL > salt {color: black} {color} ect {color: black} {color} * en {color: black} {color} om my{color:black}{color}_{color:black}{color}table{color:black}{color}@BLAH;
  Salt {color: black} {color} ect * en {color: black} {color} om my{color:black}{color}_ta{color:black}{color}ble{color:black}{color}@BLAH
  *
  ERROR on line 1:
  ORA-02085: link on the database of BLAH. AAA. BB. CCC. DDD connects to
  DEVDB. AAA. BB. CCC DDD.

  For me, that makes no sense. If the link does not work... How did get the "invalid username/password" in the #1 attempt?

  Learn about the GLOBAL_NAMES initialization parameter. Default GLOBAL_NAMES = TRUE, which means the database link is required to have the same name as the database in which it connects. Database name DEVDB link or define GLOBAL_NAMES = FALSE:

  SQL> create user Darren2
    2  identified by "tiger!"
    3  default tablespace users
    4  quota unlimited on users
    5  /
  
  User created.
  
  SQL> grant create session to Darren2
    2  /
  
  Grant succeeded.
  
  SQL> create table Darren2.tbl as select 'Darren2' name from dual
    2  /
  
  Table created.
  
  SQL> create database link sol10@Darren2
    2  connect to Darren2
    3  identified by "tiger!"
    4  using 'sol10'
    5  /
  
  Database link created.
  
  SQL> create database link sol11@Darren2
    2  connect to Darren2
    3  identified by "tiger!"
    4  using 'sol10'
    5  /
  
  Database link created.
  
  SQL> select  *
    2    from  tbl@sol10@Darren2
    3  /
  
  NAME
  -------
  Darren2
  
  SQL> select  *
    2    from  tbl@sol11@Darren2
    3  /
    from  tbl@sol11@Darren2
              *
  ERROR at line 2:
  ORA-02085: database link SOL11.REGRESS.RDBMS.DEV.US.ORACLE.COM@DARREN2 connects
  to SOL10.REGRESS.RDBMS.DEV.US.ORACLE.COM
  
  SQL> select value from v$parameter where name = 'global_names'
    2  /
  
  VALUE
  --------------------------------------------------------------------------------
  TRUE
  
  SQL> select * from global_name
    2  /
  
  GLOBAL_NAME
  --------------------------------------------------------------------------------
  SOL10.REGRESS.RDBMS.DEV.US.ORACLE.COM
  
  SQL> alter session set global_names=false
    2  /
  
  Session altered.
  
  SQL> select  *
    2    from  tbl@sol10@Darren2
    3  /
  
  NAME
  -------
  Darren2
  
  SQL> select  *
    2    from  tbl@sol11@Darren2
    3  /
  
  NAME
  -------
  Darren2
  
  SQL> 
  

  I don't have two databases, so in my sol10 database I create two database links sol10@Darren2 and sol11@Darren2 both pointing to itself (back to sol10 database). That's why I use qualifiers link db. The two links you connect as a Darren2 user with password Tiger!. The global database name is sol10 and initialization of setting global_names = true. As you can see what global_name (sol10) corresponds to the name of the link in sol10@Darren2 db (again, the link name is sol10 and Darren2 is qualifying link) select vai db link works OK. But the sol11@Darren2 link fails because the name sol11 link does not match the name db global sol10. However, as soon as I change global_names false, sol11@Darren2 works fine. It will be useful.

  SY.

  Published by: Solomon Yakobson on January 1st, 2009 08:41

• Create vector masks (with the pen tool)

  I used Photoshop to make masks to cover things which I then import in first to use during the video.

  To do this I have been using a still of the video, then using the pen to select the part of the image I want to use as a camouflage. Once I described in section, usually I right-click to make a vector mask.

  Today, instead of make a mask out of the content inside the tool path pen, he made a mask of the content in reverse. In other words, what I don't want. I don't know what I did to the Photoshop of anger, I haven't changed any settings (as I know). How can I fix it?

  Hello

  What version of photoshop are you using?

  I would check operations of path and you want to probably she set to add or combine.

  Photoshop cs6

  

  Photoshop cs5 and more

  

• I double click on the adjustment layer, but does not work.

  Hello

  Could you help me, please.

  With the help of Photoshop CS5. It begins to be a problem in adjustment layers.

  Click to create an adjustment layer, but not the window to adjust.

  Thank you!

  Google translator

  Make sure that your properties panel is open. Go to the window, and under this menu, you will see all the panels. Select Properties.

• dissolve in or on the adjustment layer

  For one reason or another, every time I have use an adjustment layer and add a fade at the beginning or end of the shot fades to black, or at the front, begins in black.  Seems to make no difference if it is a unsharp mask or some sort of color corrector.  I'm miossing something really obvious?  It worked fine in CS6.

  THX... jw

  MAC PRO 2 x 2.93 GHz 6 Core

  40 GB 1333 DDR3 Ram MJZ

  Kona card 3

  Graphics Quadro 4000 card

  OS 10.8.4

  CS7.0.1

  Video player Apple XServe raid

  4 TB G-raid & 3, 7200 RPM internal 2 TB disks

  Mid-2010

  System SN H02020UYEUH

  Processor SN: J5150032DBH8C

  This is normal, and how it's always worked because adjustment layers have been presented at PP.