Failed to create field when you configure the domain for the UCM 11 g

Similar Questions

• Network connectivity error when you configure the server for vSphere

  I've just set up my first hypervisor, and naturally it became painfully obvious how much I have to learn.

  I met a problem that I don't know how to fix. When you configure the server, I have configured network settings manually in order to give him the good gateway, subnet mask and static IP address. Unfortunately, I still get "Failed" when I ping the DHCP server. ""

  Hope that the community will be able to guide me in this problem. I am sure it takes to understand this, so let me know what is needed and how to get more information. Thank you!

  Find the person who is responsible for the management of the switch and check which port is set to for example the VLAN you need. Depending on your setting of the port must be configured as an access port or a 802. 1 q port if you configure the VLAN ID on the ESXi host

  André

• I'm unable to deselect specific fields when you set the Reset button in a form.  I can only "select all" or "deselect all". Someone at - it happen?

  I'm unable to deselect specific fields when you set the Reset button in a form.  I can only "select all" or "deselect all". Someone at - it happen?

  Yes, this is a common problem. Use the SPACEBAR to toggle individual mailboxes.

• "Limited connection" when you configure the network between two computers XP.

  Original title: Configuration of the network connection

  Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

  Thanx Terry

  Old but good, networking tips from MVP Malke, MS:

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Get Windows to create email when you attach the pic of?

  Now one-message electronics created not when I am attaching a photo of Gallery WIndows or explorer.  Acts of normal size, select & choose "join", but no message created.  Chatted with WIndows help, told me to repair Windows Live Essentials in Control Panel but I do not have this listed prgm.  Then told me to come here...?

  Hello

  You don't tell us what e-mail program you use and if you put in place using the settings of your ISP (Internet Service Provider)...

  See you soon.

• Time Machine does not recognize the backups when you configure the external drive as a network drive

  I have a MyBook 5 to disk with a 1 TB partition that I used as a destination for Time Machine > 1 year now. I recently gathered the energy to connect the my book on my Airport Extreme Base Station (model 2014? the second model) to implement wireless backups. I plugged the MyBook on the base station, set up file sharing in AirPort Utility and created an account with access to the partition of TM on the MyBook under the section 'Sharing secured disk' utility.

  Now, when I open the time Machine, I choose this partition, but it does not seem to recognize that I have a string of backups already there. Then he tries to start a new backup. So a few questions.

  1. Should I abandon my old backups and start over? I don't think that I did nothing to my system in these last days that I would need to be careful, if I couldn't rely on a TM backup from that moment.
  2. Is there a way to get TM to recognize my old backups and start from there? I do not look down the barrel of a backup of time + 13.

  If 1, should I reformat the partition TM in order to start over? I don't see the older backups on disk when I look in the Finder, but I know that they are there and they are too much space. Help/suggestions appreciated!

  Inherit from a backup

  Inherit from a backup (2)

• Translation in MAX problem when you configure the SSH server on a cRIO-9068

  Hello

  In my view, that there is a problem with the German translation of the remote switches max on the new cRIO-9068. When you look at the English Version, you see "Enable Secure Shell Server". In the German Version, you see "Secure Shell Server deaktivieren" which meens to disable the SSH server. The box did the same features, so after you disable SSH in can access. This it seems that it is probably just a translation problem.

  I have attached two screenshots.

  Andreas

  Thank you Andreas.

  This has already been supported in Nov 2013 and should be fixed soon.

  Marco Brauner NIG.

• How to change the size of the video field when you use the camera

  I read the code 4.6 camera example:

  ...

  _videoField = _videoControl.initDisplayMode (Field) (VideoControl.USE_GUI_PRIMITIVE, 'net.rim.device.api.ui.Field');
  Display the video control
  _videoControl.setVisible (true);

  ...

  Basically, it creates a class and add the Manager user interface field. But the size of the field is small. How to adjust the size of this field?

  Currently, there is no API to control the zoom level of camera.

• A date today can be added in a date field when you press the submit button?

  I created a form with a "submit" button and the form is sent by e-mail.  Then the date when the form is submitted to appear in a date with the key field is pressed?

  
  Any help with this is appreciated. Thank you.

  Hello

  There is a preSubmit event to form objects that you can use.

  Select your date field, open the script editor and add this script (language is FormCalc) in the preSubmit event.

  $ num2date = (date (), ' MM/DD/YYYY')

• With WAN Miniport problem when you configure the VPN in Windows 7 server

  I tried to make my computer a VPN server by establishing a "new incoming connection" under connections in the network and sharing Center. Originally, she she started but showed no WAN Miniport connections. I could not connect to this VPN with my other computer.

  What I've done so far:

  • I have 'upgrade' all WAN Miniports in 'MAC Bridge miniport driver' Device Manager (since I couldn't uninstall them as they were) and then uninstall all WAN miniports. I restarted my computer and then I tried the device drivers to install automatically, but only a few installed successfully.
  • Then, I downloaded the latest WDK (8.1) and tried to reinstall all Miniports WAN via devcon.exe with the command "devcon.exe install c:\windows\inf\netrasa.inf MS_PptpMiniport. He says that the node has been created, but it could not install the drivers. I restarted my computer, but some of these minis ports appeared as 'Unknown' in Device Manager, while others appeared with their names but with numbers attached because I tried a few times, Ex: "Miniport network EXTENDED (IP) #3".»

  from my understanding, I need at least WAN Miniport pptp to work for VPN to work. I don't know what to do at this point. Any help is greatly appreciated. Thanks in advance.

  Gateway DX4822-01 desktop PC

  Windows 7 64-bit, SP1

  Hello Jdrumr,

  Welcome to the Microsoft Community Forum.

  The question you posted would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Error "VM with OS invited not supported" when you configure the pool

  I installed windows XP SP3 64-bit as a parent VM on my server ESXi 5. When I tried to set it as a picture 'default' in a pool in the adjustment section "vcenter server" I faced this error "VM with OS invited not supported." I installed XP 64-bit, because for installation see agent I had to use it.

  The answer is quite simple, but probably not what you want to hear,

  Win XP 64 bit is not supported with only 32-bit view.

  Running Win7 64 bit instead.

  Linjo

• What area should I allow downstairs when you configure the iphone model 6 DPS

  I'm trying to implement a DPS model for iPhone 6, I know that I need 6px alloow on the right of the scroll bar, but am unsure of the bottom margin area

  Thank you

  Hello

  IS the same in the iPad

  Top - 64 px

  Bottom - 44 px

  Concerning

• Command to refresh a calculated field when you select an option from the drop-down list box

  When my form user selects an option in a drop-down list box, the value in the field (in this case, Total) I would like to update, but it isn't.

  A radio button option box makes the Total-development field to automatic update when the user clicks on the radio button. But the drop-down list box is not updated Total (without clicking away from the field). I would like to add a command in the Combo Box to refresh the Total field when you selected the option to drop-down list box.

  Someone at - it a code (Javascript?) to get there.

  Thank you very much.

  You don't need a script, simply select the 'Value selected to validate immediately' checkbox on the Options tab of the dialog list box drop-down list box field properties.

• To access the properties of an Error Message When you use the DisplayRunTimeErrorDialogEx method

  I have a reminder that displays the standard runtime error dialog box using the method Engine.DisplayRunTimeErrorDialogEx of custom error. http://zone.ni.com/reference/en-XX/help/370052H-01/tsapiref/reftopics/engine_displayruntimeerrordial....  The parameters of this do not allow me to specify information about the error message available (via the properties of the stage of the appeal of error).  However, when built-in bed in treated TestStand display dialog runtime error through its methods of error handling he managed to fill in the details about the error.

  Anyone know how I can fill in the details and the error code from the dialog box fields when you use the DisplayRunTimeErrorDialogEx method to call it? See attached screenshot by one example of what I get when I use this method.

  Kind regards

  David

  Doug is correct; each sequence in the call stack has its own sequence context, so if you just "ThisContext" for the sequence context parameter, you provide the framework for the error callback, which has no error.  To access the context of the sequence that wrong, you use the caller property to get to the next level in the call stack, for example:

  RunState.Engine.DisplayRunTimeErrorDialogEx ("error Dialog", ThisContext.Caller, 0, False, False, False, False)

  I hope this clarifies!

• What happened to the image field when you create a field of type of image for the Web application?

  What happened to the image field when you create a field of type of image for the Web application?

  The answer is that the point of the IMAGE has been changed to the MEDIA.

  Sorry, Ian, what research for this discussion, I got no results. All good and thanks for the carillon. Hope everything goes well.

  Mouma