Failed to get off the screen of language

I just bought and unpacked my new Apple Watch. I turned it on and I get the screen that allows you to select the language, and also tells you how to return this voice on and outside.  When I push English, the voice said English, but the screen will not erase where it says how to activate the voice and the. When I touch the screen, that I get sometimes cancel with the arrow left or back with a left arrow. That's all I can do I can go no further, as well, so I can't even synchronize my watch. Help, please.

Hello

Try to restart your Apple Watch: press and hold the button side until you see the cursor off the power; Drag the slider to turn off; Press and hold down the side button until you see the Apple logo.

If that still does not help, then try force restart: press and hold the side button and the digital Crown for about 10 seconds, until you see the Apple logo.

Then, make sure that you follow all the instructions here:

Set up your Apple Watch - Apple Support

Tags: Apple Watch

Similar Questions

  • Is it possible to get the details of the file (for example the subject and comments) off the screen and to an Excel file or a text file without having to retype this information

    Is it possible to get the details of the file (for example the subject and comments) off the screen and to an Excel file or a text file without having to retype this information

    * original title - file details *.

    Hello

    Could you explain what is exactly? What do you mean by off the screen?

    According to my way of thinking, you want to export the file details of all your files on your HARD drive to an excel file or a txt file. If I'm right in this case, it is not possible to export the details of each & every file in the excel sheet.

  • The opening of the window to get started off the screen

    Hello

    I recently acquired a second display for my MacBook Pro, so when I have both connected displays and open Photoshop (on each screen) putting road window opens off the screen so I can't close it (see screenshot below). How can I fix it?

    Right now I have to open Photoshop with my second offline screen, close the window get started, then plug my second monitor.

    Thanks for your help in advance!

    ~ TaylorScreen Shot 2015-08-31 at 7.52.44 AM (2).png

    When you switch from Windows to the other display screens in Photoshop Photoshop close to this State Photoshop remembers where you position palette, picture windows and dialogue.  If you restart Photoshop and the other views are not available. Photoshop can open windows off the screen or partially off the screen.  At least seem be the way to a working windows.  Windows operating system provides means for moving and sizing of these windows.  Mac may also have options.

  • I can get to resize the display bar at the bottom right. It extends off the screen. Help, please?

    I can get to resize the display bar at the bottom right. It extends off the screen. Help, please?

    Irene

    Have you tried the resize in the window upper right button.  There are 3 buttons, we close the window one he minimized no date limit it and the other allows to switch between full screen and a smaller screen.  Click on the last one and see what happens.

  • How do you get the menu bar to stop going off the screen all the time?

    2007 IMac 2.4 ghz 4gig ram 1tbt hard drive

    I've updated 'ELCAPITAN' and that I was using the preserved menu bar disappear off the screen that became boring and I couldn't find any way to stop the menu bar to go off the screen, so I went back to snow leopard but have updated for osX 10.9.5

    with no bar menu to disappear.

    The menu bar can be set to hide and show in El Capitan.

    In any OS X that implements the full mode screen, the menu bar is hidden in fullscreen.

    In both cases, move the mouse to the top of the screen will be un-hide the menu bar.

    You can disable the general masking in general system preferences in El Capitan.

    For full screen, you can prevent the concealment using do not full-screen.

  • I want to make the smallest windowq, she is so great that the buttons are off the screen mode full screen

    The Firefox window is in full screen mode, the buttons are off the screen. I want to get out of
    Full screen mode so I can resize the window myself. I am running Linux Mint cinnamon

    When you are in full screen view, move the mouse to the top of the screen to facilitate the bar bar appear Navigation and tab.
    You can use one of them to exit full screen:

    • Click the expand (in the top right Navigation bar) button to exit full screen
    • Click full screen in the '3-bar' button dropdown menu
    • Right click on an empty space on a toolbar and select "exit full screen".
    • Press the F11 key

    Try to rename (or delete) the file xulstore.json in the Firefox profile folder.
    You can use this button to go to the current Firefox profile folder:

    If you are currently using a version from the repositories of your distribution of Linux, try the official Mozilla Server version.

  • 6.6 keynote opens the window off the screen

    Since v6.6 Keynote opens a file off the screen on the first launch, I see the window at all.

    I have two monitors, a my MacBook Pro (mid-2012) and the other is a 15 inch USB monitor AOC. BTW and may be connected, the driver for this monitor causes the transformation to fail when it is attached.

    As I said, very good spear Keynote, but the file I want to work on is nowhere to be seen on my screen. When I hit CMD-CTRL-F (full screen), the presentation appears, and when I then hit ESC, I see the window right on the right edge of the laptop screen (see screenshot below), which allows me to put on the window and work on the file.

    Of course, it's heavy, if I have to do it every time I run the application Keynote. I searched here in this forum, but I have not found anything that could help me. Does anyone here know of a fix for this strange behavior?

    Since v6.6 Keynote opens a file off the screen on the first launch,

    Make sure you have the latest version of the speech which is 6.6.1

    the other is a 15 inch USB monitor AOC. BTW and may be connected, the driver for this monitor causes the transformation to fail when it is attached.

    These screens are very useful, but they are well known pose a problem with photographic, presentation and installation of applications on the Mac.

    If you can live with this poster failure very well, but if you want flawless performance, you need to use a display with HDMI, Thunderbolt, mini displayport or DVI of the Mac connection.

  • someone got into my account without my permission and I report it then you send me an Email but Ialready close my account. now I can't sign to ALERT SECURITY off the screen

    Someone got my account without my permission and Ireport. Yousend me an Email, but I have already closed my account. Icannot get theSECURITE ALERT now sign off the screen.

    Hello

    Guessing that it is a question of Hotmail...
    Browse through the categories of Solution here http://windowslivehelp.com/product.aspx?productid=1

    If you can't find an answer, ask the question in the Hotmail forum.

    Don

  • Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.

    Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.  Just reinstalled MP 11, same problem.

    Hello

    · What is the number and the model of the computer?

    · This occurs when you are working on any specific file format?

    · Were there any changes made on the computer?

    · You play the file in mode full screen?

    Change hardware acceleration

    a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)

    b. right-click on a space empty on the desktop.

    c. go to the resolution of the screen.

    d. click Advanced settings, and then click the "troubleshooting."

    e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).

    You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373

  • Program opens off the screen in a multiple monitor on Windows XP configuration

    Original title: I URGENTLY need help with an XP several problem of monitor!

    Our company has recently migrated to a new office and I got stuck with the displacement of all the computer systems to the new office. To make a long story short, one of our employees use four 4 monitors. After many difficulties, I finally got the monitors working as a horizontal screen with scrolling smoothly from left to right.

    However, I have a BIG problem. One of the programs of this employee uses disappears (flies off the screen right most) when maximized. I can bring it by moving to the right screen, but I can't understand how to do that a permanent solution. ANYONE - your help would be appreciated. Is it a matter of swapping the screens? It was rather difficult to get properly prepared screens because it did not meet the order, I tried. Anyway, these people are rare flowers and get bent out of shape, if the program opens on the designated window. Is there a way to specify which window it can open on whether it can be remedied at all times?

    Thanks in advance

    Hi Petrovsky9000,

    Have you tried disabling 3 additional screens and then by testing the application? If you need help of deactivation and activation of the monitors, you can use the following as a guide:
    http://www.Microsoft.com/windowsxp/using/Setup/hwandprograms/monitors.mspx

    If you always lose the application when the window is maximized, try the following:

    1. With 1 active display, maximize the application.
    2. In the display properties window, set the resolution of the single screen for a step down from where it is now and apply the changes.
    3. Accept the new resolution, and now to see if your application is in the center of the screen.
    4. Now go ahead and set the resolution to what it was and and apply the changes.
    5. Make sure the application is always visible and maximized correctly. If so, go ahead and turn the other 3 views and see if everything works properly.
    Here are a few steps that solved the problem for my own systems in the past. I hope this helps!

    Cody C
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Open Media Player to the right off the screen. to-do bar the media icon flashes open to the right of the screen.

    Open Media Player to the right off the screen. Media player icon taskbar flashes open to the right of the screen.

    For WMP do return to the screen, follow the instructions at why WMP does not open when I run? I only get an icon for it on the task bar. Tim Baets
    http://www.BM-productions.TK

  • Windows Media Player is dragged off the screen, now I need to go back to the screen as soon as possible HELP

    SO I was using windows media player and makes it smaller.  Unfortunately I dragged off the screen too far to the right.  How get her back to the screen?  Help

    Hello

    Bring back moved off screen Windows on your desktop (keyboard Trick)
    http://www.howtogeek.com/HOWTO/Windows/bring-misplaced-off-screen-Windows-back-to-your-desktop-keyboard-trick/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Photo folder to move off the screen when I try to open

    When I open an image file I recorded on my desk, she opens off the screen on the right side. Only that I know it's because when I click to open or minimize the folder on the taskbar, it flies across the screen when minimize. I can't get into any of my files as they open no where I can see or even not to the folder level. Help!

    Hold down the SHIFT key and right-click on the folder icon in the taskbar.

    And select move.  Use the arrow keys to move the folder in the display.

  • Program goes off the screen to the left? -EverQuest goes off the screen to the left when you try to restore from a minimization

    Original title: left side program

    Play EverQuest and for some reason when I brought a minimization program now it goes off my screen to the left, I can minimize in the status bar and off to the left, but can't get it to the screen.

    Original title: left side program

    Play EverQuest and for some reason when I brought a minimization program now it goes off my screen to the left, I can minimize in the status bar and off to the left, but can't get it to the screen.

    Hello

    Click on the Everquest Taskbar icon to focus on Everquest program that is off the screen to the left.

    Remove your hand from the mouse.

    Press Alt + space + M.

    Start pressing on the right arrow key until the program is centered on the screen.

    Click the left mouse button , and then maximize the window Everquest.

    Let us know the results.

    Thank you for using Windows 7

    Ronnie Vernon MVP
  • File copy/delete dialog box is off the screen in a staggered multiple follow Setup

    I'm on Windows 8 on a ThinkPad W520 with a 1920 x 1080 screen and a secondary antibody NEC LCD2070NX 1600 x 1200 display connected via DisplayPort. The NEC is positioned to the left of the ThinkPad and raised higher than the ThinkPad display; the bottom of the NEC is near the center of the left edge of the ThinkPad.
    I put to the top of the poster in the Panel to take account of this arrangement:
    If I have a window of the Explorer of files open in the secondary monitor on the left and use this window to copy or remove some large files or folders, the progress dialog box is not visible. It is currently displayed in the "man no of land" above the main monitor and the secondary screen.
    The problem occurs when the secondary monitor is on the right, or above or below the primary. (I have tested some of these cases, but not completely). Also, this does not happen when the Explorer window is on the primary monitor. The problem does occur at all on Windows 7.
    Here's a film that illustrates the problem. For each image, I copied a large directory on the network and took a screenshot to display side by side and move the secondary display up to about 120 pixels in the control panel every time. You can see how the copy dialog box follows the secondary monitor vertically, but her left side is pinned to the left edge of the main screen, so he ends up disappearing from the screen.
    It is easy to see what is happening here: Explorer normally centers the dialog box of progression on the same screen as the Explorer window that opened the dialog box. This does not work as expected in the direction, but on the axis X to the left edge of the dialog box's get pinned to the left edge of the main screen.
    As the corner at the top left of the primary monitor is always (0,0), it acts as if the dialog box was positioned like this pseudo-code:
    monitor = getWindowMonitor (feed)
    dialog.centerOnMonitor (monitor)
    If dialog.left< 0:="">
    Dialog.Left = 0
    When the dialog box is off the screen, it's a bit disturbing, because it makes the impression that the Explorer window is locked. The only way I know to make visible the dialog box is with this exercise of the superpowers of keyboard shortcut:
    1. use Alt + space to open the system menu of the dialog box. The menu will open on the screen no matter where is the dialog box.
    2. Press m to move (or click on move).
    3. you will see a four-headed mouse cursor, just to fool you into thinking the mouse could do something now. It will not!
    4 instead of this, you have to hit any key of the arrow, which begins the displacement of the dialog box.
    5. now you can use the mouse (or the puree on the arrow keys) to move the dialog on the screen.

    A bit of good news...

    I just tested this on the latest version of Windows preview 10 technical, and it seems to be fixed.

Maybe you are looking for

  • Home page at the bottom instead of top of page

    Before upgrading to Firefox 12 when I opened it it showed my homepage (excites) showing the top of the page, after which I want to scroll down. Now, it opens at the bottom of the page and I have to scroll up to start at the top. I'm on an iMac.

  • Locked out of Imac at the beginning upward

    I went to a Web site, then lock just to the Imac. my display shows a lock to start four-digit screen. can't even get into the recovery mode

  • Compatible DVD burner

    Anyone can share with me about whether or not my Optiarc DVD RW AD - 7640 S is either Lightscribe and LabelFlash in line?

  • New laptop I can transfer vista to it?

    I have to buy a new laptop - I have vista Professional installed on it. It was already installed when I bought the laptop. What I have to buy an another vista or can I transfer it to a new computer laptop please?

  • Need help with the query. Help, please

    Hey everyone, need your help.  Thank you in advance.  In my view, there is function Pivot.  Just do not know how to use this function.  I have the query that works.  The result is:11-111-1111 Vlad 16505 01/04/2013 5 August 13 dental plan pre-tax amou