' FAILED to INITIALIZE SELECTED SCANNER scanning of WIN7

Similar Questions

• Error scan Dell: failed to initialize the selected paper source

  My Dell Scanner doesn't scan.  error message: failed to initialize selected paper source. Thanks for your help with this.  It's a Dell Photo 926

  Hello

  From my research, I want to suggest to follow the steps mentioned below:

  (a) make sure that you have installed all Windows updates, you can either install update via Windows Update or download it manually. Here I recommend you to install the latest Windows 7 and Windows Server 2008 R2 Application Compatibility Update.

  Windows 7 and Windows Server 2008 R2 Application Compatibility Update

  http://support.Microsoft.com/default.aspx?kbid=974332

  b) unplug the printer.

  c) download Dell Photo all-in-One Printer 926 Patch to completely remove the printer from your computer. You must run this patch until he asked to restart the computer.

  Reference the Dell Photo all-in-One Printer 926

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&l=en&s=BSD&CS=04&DriverID=R166248

  (d) restart your computer.

  (e) to download the compatible driver Windows 7.

  Dell Photo 926 all-in-one printer

  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Dell%20Photo%20926%20All-in-One%20Printer&v=Dell&uid=DELL926&pf=0&pi=3&c=Printers%20%26%20Scanners&sc=Multifunction&os=64-bit

  (f) install the driver when connecting the printer (power on) via a USB cable.

  Hope this information helps.

• "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  Hi davidd67669685,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

  Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

  If the problem persists ask please check with another user account.

  Kind regards

  Christian

• Failed to initialize correctly 0xc0000018

  I tried to connect via USB, click Execute and return this message:

  Application failed to initialize properly (0xc0000018). Click to close the application.

  I tried several cables usb, different programs and maintains that the return message. Any help would be greatly appreciated.

  Thank you

  Jon

  Hi jonpweaver2

  Thank you for using the Microsoft Answers Forums!

  Check the steps below to solve your problem.

  Step 1:

  Put the computer in a clean boot (namely if any third-party software hinders the process)

  http://support.Microsoft.com/kb/929135 ---> how to solve a problem by performing a clean boot in Windows Vista or in Windows 7

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  (Note: after find you the problem causing the program, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup)

  Step 2:

  You are able to see the USB device in Windows Explorer? If you are, then proceed as follows:

  Open the Device Manager e plug USB cable and look for the entry because it e right click and uninstall the USB device and then restart the computer and check.

  Step 3:

  Run an online Scan of your PC as well as your USB device for malware:

  If you want to scan your computer for malware and potentially unwanted on a Web site, please use the Windows Live OneCare safety scanner.

  Windows Live OneCare safety scanner is an online service that lets scan you your computer to protect yourself, clean and operate at its best. Use our free protection scan to check and remove viruses, spyware and other potentially unwanted software and to find vulnerabilities in your Internet connection.

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Re: Most of the time by Satellite T110 webcam fails to initialize

  It happens most of the time you.
  The webcam of my T110 fails to initialize and a message appears saying that webcam could not initialize, please check the device and restart the program (Web camera application) or the computer!

  Other times, it works, but after a pop up appears on the bar by saying that an unsupported USB device has been detected and could not be installed tasks!

  It is boring! Can someone help me please?

  Thank you.
  Manuel Quinaz

  Hello

  Seems that the software of webcam has stopped working.
  I think that you should first try to reinstall this software.

  First remove the software of the webcam of the system.
  Then clean the system and the registry using CCleaner!
  Reboot the laptop twice and run CCleaner several times to make sure that everything has been properly cleaned.
  Download the software of the webcam from the European driver Toshiba page, and then install it.
  Restart the unit. Launch msconfig (in RUN type msconfig) and go to the Startup tab.
  There, you must deselect landmark from the webcam software. This prevents the automatic start software. Restart the unit.

  Now, if you do want to use the webcam, select all programs-> Toshiba-> webcam software and start it.

• QuickTime Player 7.7.9 for Windows failed to initialize error 2096

  I tried to open QuickTime Player 7.7.9 in Windows 7 Home Premium SP1 with the latest updates for February 2016 and a pop-up message with the message of: QuickTime failed to initialize error 2096. There was also something to check that the application has been installed correctly.

  I opened the Panel configuration/programs and features/QuickTime 7 and selected repair. Open Setup ran the repair and closed. I restarted the computer and I tried to run QuickTime player with the same result. I uninstalled QuickTime player, restarted the computer, downloaded and installed QuickTime Player from the Apple web site.

  I tried to run the new QuickTime Player that sent the same message.

  I have somehow found and executed the installer of QuickTime Player 7.7.6 (1680.95.31). I am able to access the QuickTime Player. I checked the updates and ran the update for 7.7.9 and get once more: QuickTime failed to initialize error 2096.

  Any ideas why 7.7.9 does not work to me that computer gremlins are playing with my mind.

  Tom R

  snrdg2801, Apple's site, the latest version of QuickTime for Windows 7 is 7.7.9, you lost me here. Why aren't you install that?

• Error in the launch of TES Oblivion. It reads: failed to initialize renderer. NiXAdapterDesc::GetDeviceCaps () failed.

  Here's the thing.

  I had just recently completely reinstall Vista on my Dell Inspiron 1521 because recently there KSoD was (BlacK S Of Death creen). I was told that I also had to reinstall my Drivers and Utilities. I had Windows running after that I reinstalled Vista (finally able to reach the screen connection.) and then tried to install The Elder Scrolls IV: Oblivion, I got some kind of error message during installation and when I clicked okay, it shut out of the whole thing. So, I took my friends advice and jumped into the CD Drivers and Utilities that came with my Dell. I extracted, unpacked and installed all the drivers available on the menu (except those who say such as Verizon, Sprint, T-Mobile on them, I don't think that those who are very important, so I only did those those.). After that I did, so I took another slap at reinstalled Oblivion. This time, he actually completed the installation. I was so excited, I clicked on the logo of oblivion on my desk, and when this menu appeared with classical music (the one that offers you the options game, Options, data files, Technical Support, etc.) I clicked Play and then the black window appears as if its going to work and then just stops and this error message is displayed: failed to initialize renderer. NiXAdapaterDesc::GetDeviceCaps() failed. Then everything closes, I tried several times and got the same results each time.

  The main reason I'm being so complete in this regard is to let you know EXACTLY what I could probably help find the problem. Another thing... I'm absolutely stupid with computers, I tried Googling the error message and I found sites where people have had the same problem but they have started talking about all this driver stuff I didn't understand even remotely. I have NO Internet on my computer, unless there is a way to disconnect a cable from my PC at home and connect it to my laptop so it won't be (could this work? If so which cable I have unplug my pc at home and my laptop? Never tried it before.). So I ask, if anyone out there who is willing to help has the answer to my problem, could you tell me how to solve this problem, as if you were talking to a 6 year old? That or just make so that even the dumbest, most computer-illiteriate person could understand. I know almost nothing about all this stuff of pilot. When I reinstalled the drivers on my pc I just follow the instructions step by step that my friend gave me, but had next to no knowledge of what exactly I was doing.

  EDIT: I played oblivion on my PC countless times before KSoD would have on me without any problems at all except that it could be a bit of lag... That's all. It has completely worked until I got the black screen of death on my Dell Inspiron 1521 and had to reinstall vista and all the drivers.

  Hello DJS4400,

  Thank you for using the Microsoft Windows Vista Forums.
   
  GetDeviceCaps() is a DirectX routine call made by the game engine for you check the details of the video card, what it is capable of supporting, and after that the game engine make certain decisions about what all the things to initialize for her. If that is a failure, it means that the game engine is not able to read your video card correctly.
  Most likely, this would be a problem with the drivers and of course, could be a problem with the card itself.

  Try running another game and see if it works. If it isn't, definity your drivers need a second look. If it does, this means, oblivion has a problem with the drivers you are using, or else they have not been installed correctly.

  I would first try:

  Click Start-> then type ' Device Manager "in the field of research-> game controller, select device-> next Manager, select sound and video-> This will drop your card-> with the right button on the map and you should have an option to update the drivers."  Once you repeat this test.

  If still no luck, right click again on the map and select Uninstall (you may have to restart after that) and then return to the driver and reinstall.   In most cases if you need to reboot, when your computer starts it will try updating the driver automatically from the site.

  Please let us know status.  Thank you!
  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005)

  STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005).  Click OK to close the application.

  Occurs when I try to restart my laptop and ends the boot process.

  03/08/11 I get this same error, and I see that nobody has answered it yet. DPR anyone has any idea other than a new image for this problem?

  Rodolphe/Spyware/Malware infection, blue screens don't have an option to click OK to finish or even forget that you can click on anything. If you do not work in safe mode or even last known good configuration you can try a repair installation, but you can still loose data like that. I would just pull the information you need out of the HDD using a speaker and then wipe and start over from scratch. Don't forget to scan your files if you do not import everything using a speaker. However if you can access the mode safe mode with networking, try to download malware bytes and running (don't know how its spelled) it will remove files such as _is27.exe which is a (Rogue.Installer).

• Failed to initialize for the logon process

  My phone displays the following message when I turn it on (the screen is black, but this message shows): failed to initialize for the logon process
  The interactive logon process initialization has failed.
  For more details, please see the event log.

  Clicking OK doesn't do nothing, the message just keeps reappearing.  I tried stopping and starting Windows up in Mode without failure.  The message appears in Safe Mode, as well.

  Hello berniesun,

  You can give the Startup Repair to try to clear this error. I've included the steps located in the help section on all versions of Windows Vista. If you want to print these instructions for yourself, you can go to help & Support in the Start Menu and type the Startup Repair in the top search box.

  Check back with us and let us know if this solves your problem.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  If you have a Windows Vista installation disc:

  1. Insert the installation disc.

  2. Restart your computer.

     Click the button start , click the arrow next to the button lock , then click on restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

     Note

     • If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. Choose your language settings, and then click Next.

  5. Click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  If the Startup Repair tool is an option of recovering preinstalled on your computer:

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

     Click the button start , click the arrow next to the button lock , then click on restart.

  2. Do one of the following:

     • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

     • If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

  3. In the Advanced Boot Options screen, use the arrow keys to highlight repair your computer and press ENTER. (If repair your computer is not listed as an option, then your computer does not include startup as a preinstalled recovery option repair).

• Select a keyboard layout, and then click Next.

• Select a user name and password, and then click OK.

• In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.

Judd
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• The appilcation failed to initialize properly (0xc000007b). Click OK to close the application.

  The appilcation failed to initialize properly (0xc000007b). Click OK to close the application.

  Help please.  My computer has been infected by a virus some time ago.  I have cleaned the virus and now get the following message is displayed.

  Running Vista Home Basic Service pack 2 32-bit system.

  In particular I am getting kind of Spider solitaire, but I think I've noticed this on other games/programs of microsft preinstall.

  I have run chkdsk /f and / r but still have the same problem.  Thank you in advance.

  Hello

  It happens with any application?

  Method 1: You can also put the computer to boot and check if any third-party application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I suggest you to run the SFC scan to make sure that the system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Check in the case where the Viewer for any question regarding newspapers

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• I have a new Vista Ultimate. When I try to activate Windows Defender, I get a message «Failed to initialize 0x800106ba»

  I have a new Windows Vista Ultimate. When I try to activate Windows Defender, I get a message «failed to initialize 0x800106ba»

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  ________________________________________________________________

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Defender of Windows Application failed to initialize x 0 80070006. The handle is not valid.

  When I connect to my pc the "Windows defender Application failed to initialize x 0 80070006. The handle is invalid. "appears.
  And then when I go into my control panel and open Windows Defender is the same thing.
  How can I stop this?
  Thank you

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

      

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• CTL-alt-del does not launch the Manager of tasks, but since the taskbar, "start Task Manager" is. The 'Windows key' + n, where n is M, E, F, etc also fails to do something? Teacher of Win7 64-bit. Any ideas?

  CTL-alt-del is not launch task manager, but the fact Task Manager start from the taskbar.  The 'Windows key' + n, where n is E, M, F, etc also fails to do anything?  Teacher of Win7 64-bit.  Malwarebytes found nothing, neither did a full scan with MSE. There is some malware on board?  Where can I find it? Any ideas?

  Chris

  CTRL-Alt-Del does not bring upward the more after XP Task Manager - it brings up a different menu options:

  

  The options presented are also slightly configurable via Group Policy, if your system is equipped with:

  http://www.thewindowsclub.com/customize-ctrlaltdel-screen-Windows-7-Group-Policy

  You can kind of 'test' on your keyboard with a built in Screen-Keyboard Windows.

  All programs, accessories, ease of access, Screen-Keyboard.

  When you press a key on the keyboard, it should light up on the screen keyboard on (by pressing Ctrl):

  

  Of course, we don't know anything about your system (desktop, laptop, keyboard, PS/2, USB, wireless wired keyboard) so you may need to see if another keyboard works, another USB port, batteries, etc...

• Bluetooth control fails to initialize after mating

  Hi all

  I have a problem similar to a previous question (here). I use Windows 7 Home Premium 64 - bit on an HP HDX 16 with Broadcom integrated wireless. I have associated my pioneer What AS-BT200 attached to a VSX-921 k. This device has been paired before (it can use 3 codes pairings - 0000, 1234, 8888 - and I've matched initially by using the 0000 pairing code) but now it wouldn't connect. I have problem different havea pair my headset Rocketfish BT and found that it would not connect automatically, so I have to open my Bluetooth devices, right click on the device and click the control. In Control Panel, click on connect and let it open to keep the connection (really, why's do not connect an option from the context menu...?) Sorry, Rant off)). I thought that this could be the problem with this camera as well, but when I try to open the control I get the error message:

  "This operation could not initialize. Try again after turning off the Bluetooth and then back on. If the operation fails to initialize, try again after restarting this computer. »

  Long story short (er), I tried to restart the receiver and computer several times, I tried to remove the device and matched on all peel them three codes (he made pair, installs drivers and shows well, but does not connect), I checked, I last Broadcom Dirvers, I checked that the BT from my computer connects to other devices (D100 Creative - no problem (, Rocketfish headphone with the hoops above) and also checked that the computer was not connected to another device. I checked that the AS-BT200 connect to other devices (connect to my I-Touch).

  No idea why this device breaks down or how I can get it to connect?

  V/R

  Treamayne

  Hello

  Here is a solution I found which may be useful for you.

  If you go into the settings of your Bluetooth adapter, you should see a tab for Audio.

  No tab for Audio - tabs are Options, some COM Ports, hardware, sharing and PIM

  In this tab, you should see "Stereo Bluetooth Audio, headphone" listed. Highlight and select "connect".

  No parameters don't like that in the previously listed tabs.

  If this is not the case, the next step is to open the control panel and go to his. So for the first tab called reading. Who listed there, you should see the Bluetooth device you connected previously. Stress and make the default playback device.

  Playback of bluetooth device is grayed out without an active connection, and while it is gray, it does not define it as default playback device.

  All that said... today for no reason discernible he leaves not open the Bluetooth control window, but when I pressed the connect button that failed.  I reset everything and am now at the original error.  So I don't know why he has allowed an opening time of the control panel for the BT device or why the connection failed when he opened the window.  I will pursue other options and check with the technical support of Pioneer as well.  I'll post here if I get any where, but because I'm leaving on a 4-month business trip soon I can just put it out of this matter until the holiday when I get back.  Thanks to all who helped me this weird error.

• My mac crashes during the installation of the cs6. I have to turn off the mac. Now, I can't reinstall or uninstall cs6. He said the Installer failed to initialize.

  My mac crashes during the installation of the cs6. I have to turn off the mac. Now, I can't reinstall or uninstall cs6. He said the Installer failed to initialize.

  If you have not yet installed any Adobe application, try step below and check.

  Step 1

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. ( "Don't miss ~ symbol" )

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe.

  Open the Adobe folder and rename the OOBE, OOBE old and AAMUpdater to old AAMUpdater.

  Step 2

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  It will open the folder System Library.

  (3) then navigate to Application Support > Adobe.

  Open the Adobe folder and rename the folder Caps Caps-old and young OOBE to centenarians, OOBE Adobe Application Manager of Adobe Application Manager.
  

  
  

  Step 3)

  Basket of Adobe Application Manager of Applications > utilities.

  Step 4) [same step again]
  

  Click on the link below and download Adobe Application Manager and install the same:

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

  Once installation is complete, niche is going disappear, and then open the Application folder and locate the icon to launch Adobe Application manager, double-click it and update.

  Once the update is complete.

  Restart the computer once and try to install CS 6.