Failed to insert column break

Similar Questions

• break clause and column break report the area of ttitle

  in sqlplus, break on report clause causes the value of column previous failure to print again on the next great total page if the column break is printed on the title page. Is it possible to remove the break the column value in the region of tttile last total page big?

  Thank you.

  Hello

  In reply #3, I was talking about why SQL * more product for the page "Grnd Totl":

  Dept report

  Total general

  JOB TOTAL_COUNT

  --------- -----------

  14

  -----------

  14

  In other words, it puts the individual elements above the line and below the line AMOUNT.  In this case, it sounds strange, because there is only a single element above the line.  It would look funny if you give something like this:

  Dept report

  Total general for all departments

  JOB TOTAL_COUNT

  --------- -----------

  ANALYST 2

  4. THE CLERK

  MANAGER 3

  PRESIDENT 1

  SELLER 4

  -----------

  14

  I realize that's not what you (or your customers) asked, but you (or they) might like it.  (My favorite definition of 'feature' is "A bug that no one has the intention of".)

  It's an easy change, inserting one word will do:

  SELECT NVL (TO_CHAR (deptno)

  , 'Grand Total for all departments.

  ) AS dept

  work

  COUNT (*) AS total_count

  FROM scott.emp

  GROUP BY GROUPING SETS ((deptno, job)

  , (job)

  )

  CONSOLIDATION ORDER (deptno), deptno, job

  ;

• Yoga 2 pro - lack of default boot device or startup failed. Insert the recovery media and press a key.

  Hello

  I have a Yoga pro 2.

  I recently formatted my drive and got rid of all partitions. The reinstalled windows 8.

  Everything worked well until I went into the bios and changed the legacy boot uefi support.

  I get this is now pop up when I boot.

  By default, lack of start-up or start-up device failed. Insert the recovery media and press a key. Then select "Boot Manager" to select a new device boot or boot recovery media.

  I have no support from reccovery.

  I tried to restart the mchine pressing F2, but I still get the same screen.

  If I press on enter I then move the pop up to the Boot Manager when the list is empty, so I can't start any other readers because there is not to choose.

  I don't know what else to do...

  Help, please.

  SEB

  Mod edit: System model added to the subject line to improve visibility / clarity

  Shut down the laptop computer

  Press the NOVO button to start

  Select Configuration of the BIOS in the menu that appears

  Return to the legacy

  Exit saving changes

  Restart and check.

• Insert Page breaks in Documents

  I need to insert page breaks in some documents and cannot find information on how to do it.  On win 98 it was control (enter) but this does not work on Vista.  Can someone help me on this stupid problem, please?  I would be Greatful SO I can at least do SOMETHING with Vista!

  Without knowing the program, it is impossible to tell you how to make a page break (they are all different).  Notepad or Wordpad supports the pagebreak feature (CTRL-enter as you say for Microsot Word {version today as well} and a few others that I wasn't aware that it worked in Windows 98 supplied "processing" programs more than it does today).  Maybe you were using a different program, and then (as Word or WordPerfect or Works or something like that).

  If you have no Microsoft Office (so do not Microsoft Word), then I strongly suggest you download the OpenOffice free at www.openoffice.org , which reflects a large part of the core functionality of the Office (with the exception of Outlook) and has a program called writer which is a program of processing excellent - better by far than what comes with Vista.  It can even open and work with Microsoft Office documents (even those of 2007 and I believe that the beta of 2010).  It will certainly have a page break function (as well as MANY other features that come with the office suites only expensive (but again, this is free and despite this, it is excellent).)  If you do not have Microsoft Office or another suite purchased offfice, then I HIGHLY recommend you download and use this set of programs instead of what comes with Vista (although there are times when what you really need is an option such as Notepad - cheap and Notepad is also good for making batch script files if you are into that sort of thing).  But if you do a real word processor, you must definitely pass.  If you go, try CTRL + entry for a page break and if that is not working then check page break in helping get the correct keyboard command - but I bet it's the same thing.

  Don't be too upset that this means that you need a 3rd party program "do something with Vista.  OpenOffice is so much better that it is not yet a comparison value.  The truth is that products delivered with Vista are just not as good as some of those available on the open market (be it for a price or sometimes free).  I happen to love Vista Center backup and restore (but it's really good in more expensive versions of Vista (business and above)- and yet, there is a 3rd best product part out there for that as well (Acronis: http://www.acronis.com/homecomputing/products/trueimage/ but it is not free).)

  There are some Vista programs that may be useful.  Some people use Microsoft Mail and Microsoft Contacts as long as their email client (and customer contact) - Although many who start this way switch to Microsoft Live Mail (it's a little better than Microsoft Mail), and of course, if you have Microsoft Office, you should definitely switch to Outlook (which is MUCH better, but it costs money that the Office is not free).  As a free alternative, many use Mozilla Thunderbird http://www.mozillamessaging.com/en-US/thunderbird/ as, yet once, it is a better product with more features and options (and it's free Unlike Outlook).  The program Microsoft Search in Vista is very good if you take the time to learn how to use wisely and has need of no alternative.

  Remember that none of these other programs would work without Windows Vista (or some other OS) behind it - so it does not serve an important purpose.  You wouldn't be able to post on this site without Vista and a browser.  If you use Internet Explorer, it's kind of like using Vista because version 7 comes with Vista and cannot be added or removed (it's part of the base OS) - If you're probably using IE8 that was the upgrade (and a value of upgrade).

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• GREP expression for the last line, followed by the column break

  For all of you who read this, thank you for taking the time to help. I'm a noob to JavaScript and GREP expressions, so thank you for all your time and help with this.

  I wrote a JavaScript script to help my company format some of our work more quickly. We have pre-made models with character Styles all implemented (body, header, BodyItalic) etc.

  My script works almost perfectly to identify patterns and apply the correct character style.

  However, my expressions do not work perfectly and last line of text in the text box (linked), which has a column break, do not get to the format.

  This last line is always different depending on the document. So I can't put in the constants. They are always variable.

  My current GREP expression is. + ~ M which, theoretically, should find any character who repeated one or more times and is followed by a column break. The problem is, he finds that the last two characters on the line which are followed by a column break.

  for example

  Tribute would be tribeTE

  Eulogy would be EuloGY

  etc etc.

  As you can see, they are not always the same words and could even be a short sentence so I can't just look like some words.

  I am trying to establish why the GREP expression does not. Maybe I use GREP evil symbols? I don't know, so any help would be appreciated.

  Thank you in advance.

  Scorpio

  This column break thing seems bugy. I have no idea why only the last two characters are found. If I try to find an entire word with \w+, which does not work. I get results as weird if I try to \b\w+~M. the good news, is that InDesign is no crash, here.

  However: There is no GREP to search a specific line, so I'm looking for a columnbreak and then for the line which belongs to the aware found:

  app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "~M"; 
var found = app.activeDocument.findGrep();

  if (found.length > 0) {
for ( var i = 0; i < found.length; i++ ) {
  var curFound = found[i];
  var curLine = curFound.lines[0]; 
  curLine.fillColor = app.activeDocument.swatches[4];
}
}

• How can I create a column break?

  Hello everyone.

  I have a text box I created.  When I fill it with text, I am wanting to move to a different area of specific text on a different page of the text.  I tried to use the column break and breaking framework but had no luck with either.

  Is it possible to do so.  How can I do?

  Thank you-

  Drew

  You are on the right track, but before the text goes to the next section they need be threaded.

• Failed to insert in the database after the upgrade to 10.1.3.4

  We have recently improved our environment to SOA 10.1.3.4. And have deployed the same code in the new environment. But the DB adapter fails to insert saying:
  A technical error has occurred. Please contact the SCRATCHES Helpdesk.DOE_WSClient.RequisitionRequest.ReqOut: ERROR SOAP; ESB:///ESB_Projects/ESB10134App_ValidateRequisition/PopulateFinancialTransaction.WSDL [PopulateFinancialTransaction_ptt::insert (FinancialTransactionLogCollection)] - SISM JCA Execute of operation "insert" has no reason to: could not create/access the TopLink Session. This session is used to connect to the data store. [Caused by: jdbc/IManageESBDataSourceGlobal not found]. nested exception is: ORABPEL-11622 could not create/access the TopLink Session. This session is used to connect to the data store. [Caused by: jdbc/IManageESBDataSourceGlobal not found] See the first exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml), and then restart the server. Created by Exception [TOPLINK-7060] (Oracle TopLink - 10g Release 3 (10.1.3.4.0) (Build 080602)): oracle.toplink.exceptions.ValidationException Description of the Exception: could not acquire the data source [jdbc/IManageESBDataSourceGlobal]. Inner exception: javax.naming.NameNotFoundException: jdbc/IManageESBDataSourceGlobal not found.
  
  We have our environment as:
  
  We have entries in j2ee/home/config/data-sources.xml as follows,
  
  <? XML version = "1.0" encoding = "UTF - 8"? >
  <-sources of data xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: noNamespaceSchemaLocation = http://xmlns.oracle.c «»
  OM/OracleAS/Schema/Data-sources-10_1.xsd' schema-major-version = '10' schema-minor-version = "1" >
  < managed-data-source-pool-connection name = 'Example Connection Pool' jndi-name = "jdbc/OracleDS" name = "OracleDS" / >
  
  
  
  We have entries in $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml as follows,
  < location connector-factory = "ist/DB/IManageESBDataSourceGlobal" connector-name = "DbAdapter" >
  < config-property name = "xADataSourceName" value = "jdbc/IManageESBDataSourceGlobal-XA" / >
  < / connector-factory >
  
  
  Do you see not a problem with that?
  Our environment is down for more than a week because of this problem.
  
  Really approeciate any help in this regard.
  
  Thank you
  
  Published by: user582595 on April 27, 2009 10:39

  Also I don't have access to an advanced install and I can't remember just on top of my head. But you can load the j2ee/home/config/data-sources.xml file into j2ee/oc4j_soa/config/data-sources.xml.

  When you have tested in EM you have tested the data to the right source?

  see you soon
  James

• Failed to insert a new line with a column generated sequence id

  Hello
  
  I'm trying to insert a new row in a table containing a column of sequence according to db, used as the primary key.
  
  Here is the code for the custom method of the corresponding AM I use to insert the new line:
  
  Line row2 = getCaAppointments1 () .createRow ();
  row2.SetAttribute ("Member ID", Member ID);
  row2.SetAttribute ("Status", "Planned");
  row2.SetAttribute ("CreatedBy", coachId);
  row2.SetAttribute ("CreationDate", date);
  AppointmentId will be generated by the sequence
  DBSequence newId = row2.getAttribute("AppointmentId") (DBSequence);
  SequenceImpl s = new SequenceImpl ("XX_CA_APPOINTMENT_ID", getDBTransaction());
  Long next = newId.getSequenceNumber () .longValue ();
  System.out.println ("Got sequence as id:" + newId);
  row2.SetAttribute ("AppointmentId", newId);
  row2.SetAttribute ("CoachId", coachId);
  row2.SetAttribute ("Type", "0");
  row2.SetAttribute ("AppointmentNumber", 0);
  row2.SetAttribute ("PlannedDate", Department of justice);
  getCaAppointments1 (.insertRow (row2));
  
  I put the attribute EO 'AppointmentId' to use a DBSequence. I tried different combinations to get the sequence Id and insert a line. Nothing worked well and I'm unable to insert a new line.
  
  If I avoid using the attribute 'AppointmentId' and that you try to insert a row, it will fail with the error below:
  
  ORA-01400: cannot insert NULL into ('APPS'. "" "" XX_CA_APPOINTMENTS '. "" APPOINTMENT_ID") ORA-06512: at line 1
  
  Tried to insert the new row using BCTester but I am struck by the same error it (I was unable to change the value of the "AppointmentId" column when inserting the line because this column is read-only and it showed as - 2 value).
  
  I guess, since the attribute of column/is already marked to use a DBSequence, the value should be assigned by default and I shouldn't hit "cannot insert the value NULL to the column.
  Did I miss something necessary to trigger the sequence to automatically generate new Id and assign it to the new line before it is created?
  
  Please let me know the fix.
  
  Thanks in advance
  Rouhaud

  Hello

  Oracle changes this behavior each version, so I hope that its still OK.
  If you have a trigger on the table that inserts the value of the id if none is preset, then mark it as DBSequence, or be it the number.

  Now for your entity, just generate the impl class and override the method create, kind of old school, I know, but it never fails.
  In the create just add the code to your sequence you had:

  SequenceImpl seqImpl = new SequenceImpl("", thisTransaction);
  Number idValue= s.getSequenceNumber();
  setAttribute("Id", idValue);
  

  -Anton

• Insert line break in the description column

  All,

  I have a column in my IR that displays a long with the (~) symbol text between text, now I want to replace the occurrence of (~) with effect newline/linefeed. I tried to SELECT REPLACE (COL1,'~ ', chr (13))... but it does not work any help on that pls?... cordially

  Apex 4.2/4.1

  He got by selecting the type = std and using Chr (10).

• Insert columns and research implications need to change formulas

  I have two tables.   The first table with data has 7 columns.  The second table had formulas that had Vloopup choose a cell say, column 6 table 1.  I inserted new t in the middle of the table 1 columns, but the formulas in two table reflect the original column.  I expect that the formulas would have been updated to reflect the new position of the data in the column.  So if the research had received data from Col 6 it would now 8 Col.  That's how I remember it in Excel, is there something that I have not configured correctly or that is a feature.   Thanks in advance you all fine from smart people.

  Hello Gene,

  A glance at the current formula could offer some advice for a possible change.

  One that comes to mind is to use the MATCH to determine the position of the column to the desired source. This would require an exact match between the name of the target column and the name of the source column.

  Kind regards

  Barry

• Insert columns to a table in another

  How can we insert the columns in a table in another table, to every strange place this table in which inserts must be made? In short, the columns of a table into another table bt possibly between the table already detected.

  Here's an example, feel free to ask the question if it is not clear to you.

  It may be useful

• Insert Page breaks

  I need to take a PDF of a page and insert several page breaks. I use Adobe Acrobat Standard DC and can don't seem to find anyway to divide a page into several pages. What I've done is to convert the PDF to Excel and the fact that way, but the text is compromised, and I find myself spending a lot of time to change the overall structure of the document. It would be simpler to use Adobe Acrobat to keep the document exactly as it appears in the original PDF form and just break the page up with an insert of pages such as break in Excel. Any help would be appreciated.

  You can't just insert a page break in a PDF file. It is not intended to be edited in a way.
  If you have the original file then modify it and then generate a new PDF. If you have not then your best chance is to export the PDF file to another format (such as an Excel spreadsheet or a Word document) and then edit it and create a new PDF.

• How to avoid the total general of the classic report when the column break is installed in the Apex

  Hi all

  I develop application using Oracle Apex 4.2.0.

  I created the classic report Page.

  That I have summarized a column by selecting the check box check sum for the column.

  His shows the Grand Total.

  Then I chose the columns to break to the first column.

  His show the total groupwise and total as well as great as image below.

  

  My requirement is

  Need to hide total(Total:)) GroupWise or total general. I need to show any a total, not both.

  How to do this?

  Thank you

  Su.GI

  Su.GI wrote:

  Hi, thanks for your response.

  I use theme - productivity Application - issue 26

  -Standard model

  Report - report of Standart for classic report model.

  The above CSS code where I want to use in the page or report or model region.

  Specify a static region ID for the report area and put the following CSS rule in the CSS Inline property page:

  #static-region-id .uReportStandard tr:last-child td {
    display: none;
  }
  

  where static-region-id is the ID specified for the region.

• Insert columns (values FDF) attribute on group of resources CRM via API

  Hello
  
  I create a new group of resources using API APPS. JTF_RS_GROUPS_PUB. CREATE_RESOURCE_GROUP and it works well.
  
  The group is created and the data can been seen in the jtf_rs_groups_vl table
  
  However I need to insert values in the attribute columns also like they should be visible to a FDF on form, backend, and there is no setting to do to this API.
  
  Urgent help here.
  
  Rgds,
  Keita.
  
  Published by: 1003105 on 29 April 2013 05:55

  try to update via JTF_RS_GROUPS_PKG. UPDATE_ROW

• Report interactive apEx - line column break?

  Hello
  I use ApEx 4 and in the application created the interactive reports page. In the column "Telefon_direktni" is display phone number in the format (0xx) xxx - xxx (phone number for Croatia). When I enter the phone number, I get just 9 digits, so the SQL select query put () and - in the report results. When I have 2 phone numbers I just enter 18 digits, then select request divide number in format (0xx) xxx - xxx, (0xx) xxx - xxx. But my problem is... result interactive report for 2 phone numbers it looks like this:
  
  (0xx) xxx - xxx, (0xx)
  xxx - xxx
  
  I want thet result looks like this:
  
  (0xx) xxx - xxx,.
  (0xx) xxx - xxx
  
  How can I put line breaks in a select query after ',' it seems I want.
  
  This is my select statement:

  select
  case when LR.TELEFON_DIREKTNI is not null and LR.TELEFON_DIREKTNI like('_1%') and length(LR.TELEFON_DIREKTNI) < 10 then
                                       '('||substr(LR.TELEFON_DIREKTNI,1,2)||') '||substr(LR.TELEFON_DIREKTNI,3,3)||'-'||substr(LR.TELEFON_DIREKTNI,6,4)
                when LR.TELEFON_DIREKTNI is not null and LR.TELEFON_DIREKTNI like('_1%') and length(LR.TELEFON_DIREKTNI) > 10 then
                                       '('||substr(LR.TELEFON_DIREKTNI,1,2)||')'||substr(LR.TELEFON_DIREKTNI,3,3)||'-'||substr(LR.TELEFON_DIREKTNI,6,4)||',      '||'('||substr(LR.TELEFON_DIREKTNI,10,2)||') '||substr(LR.TELEFON_DIREKTNI,12,3)||'-'||substr(LR.TELEFON_DIREKTNI,15,4)
                when LR.TELEFON_DIREKTNI is not null and LR.TELEFON_DIREKTNI not like('_1%') and length(LR.TELEFON_DIREKTNI) < 10 then
                                       '('||substr(LR.TELEFON_DIREKTNI,1,3)||') '||substr(LR.TELEFON_DIREKTNI,4,3)||'-'||substr(LR.TELEFON_DIREKTNI,7,3)
  when LR.TELEFON_DIREKTNI is not null and LR.TELEFON_DIREKTNI not like('_1%') and length(LR.TELEFON_DIREKTNI) > 10 then
                                       '('||substr(LR.TELEFON_DIREKTNI,1,3)||')'||substr(LR.TELEFON_DIREKTNI,4,3)||'-'||substr(LR.TELEFON_DIREKTNI,7,3)||', ('||substr(LR.TELEFON_DIREKTNI,10,3)||') '||substr(LR.TELEFON_DIREKTNI,13,3)||'-'||substr(LR.TELEFON_DIREKTNI,16,3)
                end as TELEFON_DIREKTNI

  Published by: user10410320 on March 30, 2011 10:14

  Try:

  select
  case when LR.TELEFON_DIREKTNI is not null and LR.TELEFON_DIREKTNI like('_1%') and length(LR.TELEFON_DIREKTNI) < 10 then
                                       '('||substr(LR.TELEFON_DIREKTNI,1,2)||') '||substr(LR.TELEFON_DIREKTNI,3,3)||'-'||substr(LR.TELEFON_DIREKTNI,6,4)
                when LR.TELEFON_DIREKTNI is not null and LR.TELEFON_DIREKTNI like('_1%') and length(LR.TELEFON_DIREKTNI) > 10 then
                                       '('||substr(LR.TELEFON_DIREKTNI,1,2)||')'||substr(LR.TELEFON_DIREKTNI,3,3)||'-'||substr(LR.TELEFON_DIREKTNI,6,4)||',
  ('||substr(LR.TELEFON_DIREKTNI,10,2)||') '||substr(LR.TELEFON_DIREKTNI,12,3)||'-'||substr(LR.TELEFON_DIREKTNI,15,4)
                when LR.TELEFON_DIREKTNI is not null and LR.TELEFON_DIREKTNI not like('_1%') and length(LR.TELEFON_DIREKTNI) < 10 then
                                       '('||substr(LR.TELEFON_DIREKTNI,1,3)||') '||substr(LR.TELEFON_DIREKTNI,4,3)||'-'||substr(LR.TELEFON_DIREKTNI,7,3)
  when LR.TELEFON_DIREKTNI is not null and LR.TELEFON_DIREKTNI not like('_1%') and length(LR.TELEFON_DIREKTNI) > 10 then
                                       '('||substr(LR.TELEFON_DIREKTNI,1,3)||')'||substr(LR.TELEFON_DIREKTNI,4,3)||'-'||substr(LR.TELEFON_DIREKTNI,7,3)||',
  ('||substr(LR.TELEFON_DIREKTNI,10,3)||') '||substr(LR.TELEFON_DIREKTNI,13,3)||'-'||substr(LR.TELEFON_DIREKTNI,16,3)
                end as TELEFON_DIREKTNI
  

  Although I don't think it's a good way to store/format multiple phone numbers.