Failed to install the scanner on an 8.1machine victory

Similar Questions

• HP Photosmart B110: Solutions Center installs - problems of usb - only wanted to scan - how to install the scanner part

  -With the help of HP Photosmart B110

  -Use of Tower/Desktop computer running Windows 7 64 bit

  Printer/Scanner connected via WiFi to router

  -Printer part works, I can print to this device

  -Scanner is accessible via the device Web page.

  I want the software of the scanner Solutions Center.

  I can't install the Solutions Center on Windows 7 64 bit. Setup stops and says that I have USB hardware and driver problems. USB on my Tower is USB2 and USB3 ports. Everything works perfectly and the Windows Device Manager has no problem with USB drivers/devices.

  How can I install the scanner software (or all of the Solutions Center software)?

  Tried to look in the folder for the files of instsaller scanner, nothing seems to work. (pulled other positions where it not install Solutions Center). Computer is working very well, so my only option at the moment is to look through the device's Web page, but it is not the best. And I would like to use the software. Also one third of the software "fax and scan" software and windows does not see the connected B110 (probably because it is on a network and not directly plugged into a usb port), so these two options came out.

  HP forum, help please. Is there a way to bypass the usb part? I use this device on a network. Windows 7 sees (even if only as a printer), so also want windows to consider it as a scanner as well.

  Thank you

  Hi @jedi11csa,

  Thank you very much to get back again.

  I just talked with a few colleagues in this regard, and this problem seems to be more a matter of Windows operating system, if the computer displays that USB related errors as well as the installation had not yet reached the point where it asks you to select your connection type.

  Maybe it's an investigation that is best suited for community Microsoft Forums as my resources have been exhausted in this respect.

  I hope that you are able to find the solution you need.

  Thank you.

• any ideas? Installation failure: Windows failed to install the following update with error 0 x 80070663: update of security for Microsoft Office System 2007 (KB972581). That's what I get away

  Installation failure: Windows failed to install the following update with error 0 x 80070663: update of security for Microsoft Office System 2007 (KB972581).

  
  

  any ideas?

  Suggestion: Try to do a repair of Office 2007 installation, then try the updates (after a reboot).

  How to install and repair 2007 Office features
  http://support.Microsoft.com/kb/924611 TaurArian [MVP] 2005-2010 - Update Services

• I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product. Help

  I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product.  Now I have no anti virus.help please

  Hello

  It is a specific error of the AVG software. There are number of threads on the same topic on the forums of AVG.
  Reference:
  http://forums.Avg.com/us-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=Davo1330&subthemes=1

  http://forums.Avg.com/au-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=pcroft&subthemes=1

  See also:
  If you have problem install/uninstall/upgrade to update AVG: AVG 2011 + 9.0 + 8.x uninstall / re-install Instructions
  http://forums.Avg.com/ww-en/AVG-Free-Forum?sec=thread&Act=show&ID=110317

  I hope this helps.

• my computer failed, I installed the HDD in an older computer that I own

  my computer failed, I installed the HDD in an older computer that I own, and now it asks me to reregistar windows but never gives me the opportunity to enter the product key that also always shows up in windows

  Hello

  It depends on the type of license you have, as to whether you can transfer it or not.

  Pre-installed Licenses OEM (HP, Acer, etc.) and the Microsoft System Builder OEM licenses are tied to the first machine that they are installed on and channels of license when this machine dies.

  OEM licenses are not transferable.

  If you have purchased your own license for sale retail of Windows and installed yourself, yes you can transfer it to another computer.

  Retail licenses are transferable.

  See you soon.

• I need someone to show me how to install the scanner

  I need someone to show me how to install the scanner

  Contact the manufacturer of the Scanner.

  They should have a manual/Instructions online for you on how to install their product.

  If they are not: Email/phone them.

  See you soon. Mick Murphy - Microsoft partner

• Installation failure: Windows failed to install the following update with error 0xC1900104: English ESD Bundle Parent.

  8.1 for Windows cannot be installed on my Sony Vaio Duo 13! An error pops up asking me to contact the OEM manufacturer for BIOS update. Checked in the event log and saw this error: Installation failure: Windows failed to install the following update with error 0xC1900104: English ESD Bundle Parent.

  Any idea? I'm redownloading the update now.

  More details

  Log name: Application
  Source: Windows Error Reporting
  Date: 17/10/2013-20:26:04
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: SAM-DUO13
  Description:
  Bucket of error, type 0
  Name of the event: WindowsUpdateFailure2
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1: 7.8.9200.16715
  P2: 8020002e
  P3: 0E51874C-8E6E-47B6-A835-CCAEEF3D9997
  P4: download
  P5: 101
  P6: unmanaged
  P7: 0
  P8:
  P9:
  P10:

  Attached files:

  These files are available here:

  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 49ede667-3727-11e3-bea8-fd232fd2f50b
  State: 262160
  Bucket Hashed:
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1001
      4
      0
      0 x 80000000000000
     
      12180
      Application
      SAM-DUO13
     
   
   
     
     
      0
      WindowsUpdateFailure2
      Not available
      0
      7.8.9200.16715
      8020002e
      0E51874C-8E6E-47B6-A835-CCAEEF3D9997
      Download
      101
      Unmanaged
      0
     
     
     
     
     
     
     
     
     
     
     
     
      0
      49ede667-3727-11E3-bea8-fd232fd2f50b
      262160
     
     
   
  

  I found the post on the Sony support site. Give it a try.

  http://community.Sony.com/T5/VAIO-hardware-networking/availability-for-Windows-8-1-upgrade-for-VAIO-PC-s/m-p/204481#M13112

• Error 8007005 when trying to install the scanner of HP color MFP 175 100 has under win 7 64 bit

  Hi, printer is well install but fail to recognize that the scanner tried any possibility has failed.

  Thanks for the reply. I suggest you to contact the hardware manufacturer for assistance.

  http://WWW8.HP.com/us/en/support-drivers.html

• Profile Manager - failed to install the remote access profile in the domain environment & multi-Active Network Directory

  Hi all

  I am a COMPUTER administrator for a college and I am trying to fix what seems to be the last hurdle in getting the Profile Manager works correctly.

  I worked for a while now trying to get the Profile Manager capable of pushing the device and profiles for Mac in our group network environment. I was able to operate intermittently, but not often. Most of the time I'm unable to install the remote management profile.

  When you try to install the remote management profile, I give myself one of the two errors-

  The first error is:

  The Installation of the profile failed.

  The «TeleManagement (com.apple.config. » profile (Server.FQDN.mdm:GUID) "could not be installed because of an unexpected error < MDMResponseStatus:500 >

  (Obviously server.fqdn and GUID are placeholders for their actual values)

  

  The second mistake is:

  The Installation of the profile failed.

  Failed to contact the Protocol SCEP server to ""http://server.fqdn: 1640/CEP / "."

  

  The server Mac OS X 10.11.4 works

  OS X Server is version 5.1

  Client Mac is for most running 10.10.4

  Here's a quick run down on the environment and the steps I have already taken to solve the problem.

  • The network is an Active Directory with several networks multi-domain environment. I mainly work with two different networks, each associated with one of the two areas.
  • The Mac server hosting the Profile Manager is a Mac Pro. The two network cards is used, each on one of the two networks. The Mac server is joined to the domain in the primary forest.
  • I opened all the ports and IP ranges for Apple's Push Notification service for two on our firewall and tested networks between the two networks to ensure that the AFN is accessible.
  • I created a static DNS entry for the server in the DNS zone for the main domain. I also have a separate DNS zone for the DNS record for the interface on the secondary network. I also confirmed that Macs see the correct IP address of the Mac server for their network.
  • I tried to change the settings for network access for the Profile Manager. The first error seems to happen when the Profile Manager are restricted to the network the Mac client is not connected. This same error also occurs if I open Manager profile access to "all networks".
  • I have experiemented with the different certificate types. In general, I use the self-signed certificates that are generated automatically. In this scenario, I install the profile Trust first (which works seamlessly regardless of network or domain). I also tried to use a certificate for Code signing signed with our own CA to sign the profile of remote management. The same errors will occur no matter what certificates are used.
  • The second error occurs when the access profile manager is limited to the same network that is connected to the Mac client
  • I ran Wireshark captures on several client computers, as well as on the Mac server interfaces and haven't seen any traffic blocked or rejected that seemed related to the Profile Manager
  • I've deleted and rebuilt my OD master
  • I also scoured newspapers for clues Profile Manager and haven't found much
  • In addition, I have also studied the problem and error codes/etc widely and have not found a lot of useful information
  • I don't know there are any other troubleshooting steps I took as well, but I've been question bout this for awhile and I don't remember everyone.

  That's a strange thing - I had it working for Mac on the main network and the domain. However, I discovered that the Mac on the secondary network and the field was unable to download the profile of remote management. This is when I started to change the Profile Manager, access network, which eventually introduce the problem on Macs connected to the primary/field of experimentation network. Change access return settings in Profile Manager does not restore functionality for pimps who worked.

  Another thing odd in this test scenario all - Mac on the network high school/area would not install remote profile unless management I temporarily moved it to the main network (I do not untie / reassign to one the main domain on these Macs) I could get the profile of remote management to install and then pushing profiles has worked. Even more strange, it's the Mac that I had to move temporarily secondary network to the main network to allow remote management profile install only works always as long as the Profile Manager are restricted to the secondary network and 'the Mac'. However, Macs in the same room, on the same network in the same field, using the exact image even get the errors described above.

  The only thing I have not yet done is delete/reconstruction Profile Manager. I would really like to avoid this if possible. Solutions that involve something like Casper or other software integration AD for Macs are also a non-starter.

  I'm happy to elaborate if necessary. I appreciate the help.

  Okay, I think I can find the root cause.

  Before this discovery, I had completely rebuilt Profile Manager. Now, I managed by pushing the management profile remote for Mac in the two fields/networks. However, many of them still refuse to install remote management profile.

  Macs who encounter the problem are all were imaged using NetRestore using an image captured from an another similar iMac. IMac even that was used to build the image has now been reassigned in a test of Mac. I found that when you attempt to register one of the Mac who had received this image it shows already as "registered" when you go to "mydevices" on my Mac server. I also noticed that they all have the serial number of the test Mac when viewing their "register". Among the issues of Macs, I activated the lock of the device from the page "mydevices" for the so-called problematic Mac registered (showing the serial number of the iMac used to create the image) and it locked the iMac used to create the image - not the Mac issue.

  This tells me that the CID (or Mac equivalent) is set on the Mac CID used to create the image for all of the Mac said image was deployed to. If it's a Windows box I have a sysprep prior to deployment or could perform a rearm after the fact. I am unaware of how to perform similar functions in OS X.

  I tested also since on some Macs that do not have this image, and they are able to register and install the profile of Managing remotely with success.

  If anyone has any suggestions on how to reset the CID (the computer ID) under OS X, I'd appreciate it. Thank you.

• Windows Update fails to install the update and ask again to install

  Hello

  Firstly, sorry if my English...

  I have a sony vaio laptop with win 7 Home premium 64-bit pre-installed

  so far, all updates went well, but there are 4 updates, also marked important, which fails to install.
  Windows Update try to reinstall them every time... but every time fails. Whenever I stop the laptop that I have to wait for these updates installed... knowing that the next time I'll close the laptop, the same 4 updates will be installed, without result.
  the updates are:
  KB975467 - error code 80070BC9
  KB973688 - error code 643
  KB954430 - error code 643
  Kb973923 - error code 643
  Please help me...

  Hi Luigi,

  Don't worry about wasting my time. I love doing research and constantly learn new things.  I found another post on this site which recommended the .NET solution.  Here is the link to this article: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/e3d8edeb-1a3b-42d3-a635-070264696db5.  Unfortunately the user in this link has failed to let us know if it worked for her or not.

  If this does not work (or you don't want to go through the above steps), you must contact Microsoft Update Solution Center http://support.microsoft.com/ph/6527#tab0.  Click on Contact a technical support engineerand accept the agreement.  You will receive the free e-mail directly support from Microsoft Support staff.  Don't forget to let them know all the steps you have tried so far so that they are not duplicated.

  If this is resolved, I'd be happy if you referred to this site to let me know how it was fixed.

  Good luck

  Barbara

• My Windows update fails to install the important update 3, and the error code is Code 8007045 D. Anyone had this happen, and how can I fix it?

  Code 8007045 that appear when Windows Update fails to install important updates

  Short story: If you do NOT live in one of the zones listed in http://support.microsoft.com/kb/976098, you really don't need to install this update anyway so you can just "hide".

  HOW to hide an update or restore a hidden update
  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• KB936929 error msg 0 X 8024600 update failed to install the update

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB5; .NET CLR 1.1.4322; .NET CLR 2.0.50727;. 3P_UVRM 1.0.8.4. UNACCOMPANIED MINORS, 4.1.223.2; 3P_AMG 1.0.25.0; DEL 3.2.155.0; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729;. MSN OptimizedIE8; ENUS; yie8)

  Ugh!

  More questions, I'm afraid [so I must "disappear" for a certain time and finish my taxes!]

  1. have you you intentionally choose to install the Google toolbar (which is very obsolete)? [1]

  2A. do you intentionally choose to install the MSN/Bing-optimized version of Windows Internet Explorer 8?  [YES/NO]

  2B. is msn.com your homepage IE by chance and if so, is it impossible to change it to something else? [YES/NO]

  3A. you also intentionally choose to install an optimized version of Yahoo of Internet Explorer 8?  [YES/NO]

  3B. is yahoo.com your IE homepage by chance and if so, is it impossible to change it to something else?  [YES/NO]

  3 c. is your ISP Yahoo partner or you have an ISP that has been a partner of Yahoo (for example, AT &T/SBC;) SWBell; PacBell)?  [YES/NO]

  4 assumption but has only you or a member of the family intentionally choose to install AMG Games Toolbar and/or perhaps Del.icio Toolbar? [YES/NO]

  5 guess, but not either of these medium-sized schools do anything for you? -Online University of Arkansas for Medical Sciences and/or VRM University (online)?  [YES/NO]

  6. by chance is UVRM bar tools or toolbar of unaccompanied minors or AMG bar tools listed in Add/Remove programs?  [YES/NO]

  7. open Add/Remove Programs and make sure that Show updates at the top is checked (and leave it checked); then select the name in the box sort by on the right. Now scroll down to the bottom/end part of the window: Windows XP Service Pack 3 is not listed here, that correct?  [YES/NO]

  8. can you open Internet Explorer (only!) to http://windowsupdate.microsoft.com?... .and CUSTOM scanner?  [YES/NO]

  9. do you have a set of CDs are shipped with your computer when you bought it and if yes, do you know where they are?

  =====================================================================
  [1] if all were fine with your computer (and I don't think it is), Google toolbar should have been automatically updated itself during the 3 or 4 years & you have installed now version 7 (not the version 5).

  1 n °

  No. 2a.

  2B. MSN.COM no homepage.

  3A. No,

  3. Yes; Probably not, but I do not how.

  3 c. Yes, AT & T at the same time.

  4 No.

  5 n °

  6 not listed.

  7. it is now; Yes.

  8. Yes.

  9. Yes.

  The answers were slow in coming. I have too been intermittently working on my taxes.

• Failed to install the new driver Acer Aspire E1-571

  I upgraded to 8.1 8 wind wind (OEM), I tried to install the new driver for Elan Touchpad Acer support but he failed, but the installer says the driver is installed correctly, when I checked in the Device Manager, there is no momentum drver but found the PS2 of Windows compatible driver.

  Any suggestions or help appreciated, thanks.

  Thank you clyde.

  Yes, I tried different drivers and none of the newer drivers work, finally, I opted for the original driver version 11.6.8.1 and organized settings to my liking.

  The drivers installed 11.6.24.203 but not appear in Device Manager

  11.6.27.201 has frozen my BONES with BSOD

  Thanks again for your suggestion, much appreciated.

• Cannot install the Scanner

  After the safety scanner download it will not be installed and there is a message that says that this version of the scanner has expired and does not work.  What should I do?

  Thank you.  I think I found the problem.  For some reason, the computer's date was December not October.  I have fixed the date and have downloaded properly

• Windows XP SP3 install the scanner software

  There are 6 monthe did clean reinsall. Have ALL iin one Epson. No problem printing. Now unrecognized scannner. Tried to reinstall drivers, without help, even with the help of Epson tech. Tried to install the old Canon scanner flat had not used on current PCs. With the help of Canon tech, could not install drivers, at least not installed not recognized even tho "Found new Hdware" Assistant appeared software to scan. No error code. In the technique of the unit,CanoScan appears w / yellow "?"

  Perhaps a missing or corrupted registry file WIndows need?  Please advise as soon as POSSIBLE.

  Try restoring the system running.  Click Start > programs > Accessories > system tools > system restore. Select a date before that problem - preferably, 2 days before the problem started.