Windows XP SP3 install the scanner software

Similar Questions

• HP Photosmart B110: Solutions Center installs - problems of usb - only wanted to scan - how to install the scanner part

  -With the help of HP Photosmart B110

  -Use of Tower/Desktop computer running Windows 7 64 bit

  Printer/Scanner connected via WiFi to router

  -Printer part works, I can print to this device

  -Scanner is accessible via the device Web page.

  I want the software of the scanner Solutions Center.

  I can't install the Solutions Center on Windows 7 64 bit. Setup stops and says that I have USB hardware and driver problems. USB on my Tower is USB2 and USB3 ports. Everything works perfectly and the Windows Device Manager has no problem with USB drivers/devices.

  How can I install the scanner software (or all of the Solutions Center software)?

  Tried to look in the folder for the files of instsaller scanner, nothing seems to work. (pulled other positions where it not install Solutions Center). Computer is working very well, so my only option at the moment is to look through the device's Web page, but it is not the best. And I would like to use the software. Also one third of the software "fax and scan" software and windows does not see the connected B110 (probably because it is on a network and not directly plugged into a usb port), so these two options came out.

  HP forum, help please. Is there a way to bypass the usb part? I use this device on a network. Windows 7 sees (even if only as a printer), so also want windows to consider it as a scanner as well.

  Thank you

  Hi @jedi11csa,

  Thank you very much to get back again.

  I just talked with a few colleagues in this regard, and this problem seems to be more a matter of Windows operating system, if the computer displays that USB related errors as well as the installation had not yet reached the point where it asks you to select your connection type.

  Maybe it's an investigation that is best suited for community Microsoft Forums as my resources have been exhausted in this respect.

  I hope that you are able to find the solution you need.

  Thank you.

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Cannot connect to Windows XP SP3 because of malicious software, continues to connect then suddenly off. What I can do. Will do the same in Safe Mode.

  Cannot connect to Windows XP SP3 because of malicious software, continues to connect then suddenly off.  What I can do.  Will do the same in Safe Mode.

  Hello

  If you have another system then plug your HARD drive as a secondary to another system & copy below the files of this machine.

  C:\WINDOWS\system32\userinit.exe
  C:\WINDOWS\system32\winlogon.exe

  Paste these files in the same location in the C drive of the problematic computer.
  Search now for your question.

  If it won't, then I suggest you to repair your operating system.

  Thank you.

• Windows will not start since the attempt to install the camera software?

  Hello, I tried to install the camera software, when I did it said my computer to shut off and re satart to complete the installation, when I did a blue screen came up saying that windows had been shut down to protect my computer (not this one). He says to re start computer I did who bought the safe mode/start windows normally screen etc, but nothing's going to restart windows, it starts at, then returns to the blue screen again. Can anyone help please?  Thank you. Trevor

  Hello

  ·         What software have you tried to install on the system and what is the name of the program and where you installed it go?

  ·         What is the exact error message that you meet in the blue screen?

  ·         You're able to boot in safe mode?

  Method 1:

  Step 1:

  I suggest you try and boot into safe mode. Follow the steps mentioned below.

  a. restart and keep tapping F8 until you reach the start menu.

  b. Select safe mode and press ENTER.

  Step 2:

  Do a restore system, safe mode and check. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084/en-us

  Method 2:

  I suggest you to try and initiate the last known good configuration. Follow the steps mentioned below.

  a. restart and keep tapping F8 until you reach the start menu.

  b. Select last known good configuration and press ENTER.

   

  Method 3:

  I suggest to do a restore of the system from the recovery console and check if you are able to boot to the desktop without any problem. Follow the steps mentioned in the article below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

• Error code: 0 x 800700002, does not have support for the installation package ' Vista SP2 MBR Update, installing the Zune software for windows phone 7

  Original title: could not find the media to the installation package ' update of Vista SP2 MBR

  I need to install the Zune software to my windows phone 7 and I get this error message: cannot find media for error code installation package 'Vista SP2 Update MBR' 0 x 800700002. Please tell us what to do.

  Hi PamelaMaassen,

  You can read the following article and check if it helps:

  A required component cannot be installed when you try to install the Zune software

  http://support.Microsoft.com/kb/944938

  If you're still having problems, then post your query in the connection of support Zune for more assistance:

  http://answers.Microsoft.com/en-us/Zune.aspx#tab=1

  Hope this information is useful.

• Microtek ScanWizard 3700 error message on Windows 7, "cannot find the scanner, use scanner probe...". »

  I recently bought a new computer running Windows 7.  I was able to use the ScanWizard 3700 on my old computer that worked on Windows XP.  I have installed the Scanwizard software, checking compatibility, and he said: 'no change necessary. "  But... I can't use it, I get an error message "cannot find scanner, scanner using the probe...". "The probe scanner can not find the scanner either.  I see that other people use ScanWizard on Windows 7 without any problem.  Anyone have any ideas why I can't make it work?

  Hello

  The Microtek ScanWizard 3700 is not compatible with Windows 7.

  http://support.Microtek.com/downloads/bymodelname.phtml?srch_in=&AXN=2&slct_mdl=6

  Download and install the Windows 7 compatibility-mode drivers and check.

  Make older programs in this version of Windows (Windows 7)

  Hope this information helps.

• Re: How to install the backup software?

  I have Toshiba Recovery DVD for Windows XP of origin. But after the installation in backup softare avialble in system tools.
  I tried to install it from adding a program into the Panel control or extarct from the DVD. Also, I tried to download it from the Microsoft Web site, but there is no chance.

  Can someone tell me how to install the backup software?

  Concerning

  Check http://support.microsoft.com/kb/308422
  Maybe this article will help you.

• Windows XP SP3 Gets the Windows Update error message: '0x8024D007.

  Current system under Windows XP SP3 Gets the error message "0x8024D007" from Windows Update.  I tried methods 1 and 2 described in the Article 956701 but the same error occurs.  Also used REGSVR32 /u to unregister the WUPS2. DLL (mod date 2008-10-16), rename WUPS2. DLL to WUPS2. DLL.old, then copy WUPS2. DLL (mod date 06/08/2009) of a system of SP3 to update and record; This also fails with the error message "0x8024D007.

  Question: Can SP3 be removed and reinstalled without affecting existing applications that may have been installed under SP3?  I ordered SP3 on CD and that you plan to use it to reinstall.

  When you have access to the computer, your list includes:

  1. ask your son if IE7 had been installed before he did the repair facility a few years; and if that were the case, it uninstall IE7 before proceeding with the repair facility?

  2. see if a reset fixes the problem; CF. http://support.microsoft.com/kb/971058

  Tip: Access KB971058 via Internet Explorer, not any other browser and run the difficulty in there by default and aggressive modes, if necessary.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP Deskjet 3050 J610: How to find and download the scanner software and TWAIN drivers

  How can I find the link to download and install the latest software and TWAIN driver.

  My laptop recognize my printer and print documents but does not recognize the scanner.

  Hello

  Plese follow this link to choose the operating system and get the drivers for your printer

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&JumpID=reg_r1002_usen_c-001_title_r0001&LC=en&product=4066452&

  Thank you

  I am an employee of HP, these messages are consistent with my knowledge and HP is not responsible.

  By clicking on the star of congratulations in the post helped you to say thanks.

  Please indicate the position that solved your problem as accepted Solution

• I tried to install the MYOB software and got the msg 1155 file not found.

  I tried to install the MYOB software and got the msg 1155 file not found. The download seems to have worked I can find the file on my c drive. But will not be installed. Thank you

  original title: error 1155

  What is the path indicated in the error message?
  Try to re - download the program and try again.

  In addition, try to create a new administrator account and test if you can install the program, you have a corrupted profile:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• How to scan a document or photo to my all-in-one for my laptop. should I have the scanner software

  I tried scanning of photos of my all-in-one for my Samsung laptop without success. I need to download the scanner software?

  JoanRoger wrote: Scanner is inkjet HP 2060 advantage all-in-one K110 series. Laptop is the Samsung RV510 64 bit thanks

  Hello JoanRoger, here is the link for the package full feature software/driver for your printer All In One of 2060.

  I download and install this software. Do not turn on the printer or connect the USB cable before advised to do so during the installation process.

  Just to go to the linked page and the section Details and specifications, search for the DJ2060_K110_231.exe and click on the filename to download the file.

  This should allow the correct use of the printer All In One 2060 connected to your laptop.

• Cannot install the utility software

  I had to replace my system Windows XP with Windows 7. My Windows XP system is dead. I always use my loyal HP Deskjet 5650 printer. It is connected by USB on my Windows 7 computer. Windows 7 not found drivers and install for my printer. I just went to download the utility software. HP has me use the HP Printer Utility For Windows Wizard. When I clicked on the file, it finds my printer. The printer tests very well, but you can't click Next so it's finished downloading. I wasn't able to install the utility software. It was very useful to check with her ink levels. Please help me.

  Bill

  I guess I didn't hear that. I've had my printer for 10 years and it still works. I guess it's time to buy a new. I tried a good all-in-one printer. Unless you want to spend $150.00 or more, you won't find one. I'm not ready to buy a new one. My printer work under Windows 7. I just wanted to see my ink levels.

  Thanks for your help Futoji

• Problem in installing the older software

  Recently, I bought computer dell laptop with original windows 7... My problem is cannot install the old software I used Windows xp... everyone will tell me the solution for this... The following software are examples...

  software wincc from Siemens, Keyence simulation software

  Search for updates for these products, which are running Windows 7, or see if they'll work in compatibility mode.  Assistance with the compatibility mode on the start ORB, then raise help and Support, and then search for "Compatibility Mode".  Many programs that directly affect the hardware will not work under Windows 7 due to changes in device drivers and hardware access low level.

  'rulu' wrote in the new message: * e-mail address is removed from the privacy... *

  Recently, I bought computer dell laptop with original windows 7... My problem is cannot install the old software I used Windows xp... everyone will tell me the solution for this... The following software are examples...

  software wincc from Siemens, Keyence simulation software

• Whiteboard Software collides with the scanner software

  I have a scanner (CANON LIDE 110) which does a good job, IE has done a good job: since I installed a software of Whiteboard (SMART Notebook 10) the scanner (MP Navigator EX 4.0) software fails, so that the scanner is not working annymore. But with the whiteboard software is uninstalled, the scanner software working properly. How is it?

  Contact Canon support.