Failed to process the edi document entering with separator segment ~.

Similar Questions

• IIS connector with enabled basic authentication fails to process the default Document

  Configuration: Windows 2012 R2, ColdFusion 11.0.05.293506

  Our web site is configured with index.cfm as default document. We have configured a directory to use Basic authentication. If the URL is without extension (/csts_test/) IIS authenticates the user but the mistakes of cfmHandler IsapiMidule out. If the URL contains an extension (/ csts_test/index.cfm) or if the default document is a static page (HTML, etc.) IIS authenticates the user and the page is returned to the browser successfully. This seems to be similar to the post on the forum default document is not being processed when not included in the URL , but no resolution is documented. Here are the data of the isapi_redirect.log (verbose / debug) failure.

  Does anyone know of a way to make the IIS connector honours a CFM document file by default if basic authentication is enabled? Is this a bug in the connector?

  isapi_redirect.log

  [Fri Jul 17 12:12:08.083 2015] [8028:3128] [debug] handle_notify_event::jk_isapi_plugin.c (2177): filter started

  [Fri Jul 17 12:12:08.083 2015] [8028:3128] [debug] map_uri_to_worker_ext::jk_uri_worker_map.c (1170): attempting to map a URI ' / nrctrkdev.domain/csts_test/' of 40 cards

  [Fri Jul 17 12:12:08.083 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / flashservices/gateway / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.083 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / cfform-internal / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.083 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / flex-internal / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.099 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / CFFormGateway / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.100 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / cffileservlet / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.101 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / cfformgateway / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.102 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / CFFileServlet / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.102 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / flex2gateway / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.102 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFML / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.102 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *.cfml / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.102 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFML / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.102 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFM / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.102 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *.cfm / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.102 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *.cfc / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.102 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFC / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.102 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFC / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.102 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFM / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.102 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / rest / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.102 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / flex2gateway = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.102 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .hbmxml = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.102 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .cfswf = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.118 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. Cfswf = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.118 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFSWF = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.118 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .mxml = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.118 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFML = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.118 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFML = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.118 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .cfml = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.118 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .cfm = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.118 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. Ft3/min = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.118 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .cfc = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.118 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFC = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.118 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFR = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.118 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFR = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.118 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFC = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.134 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .swc = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.134 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. Ft3/min = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.134 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .sws = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.134 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .jsp = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.134 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .cfr = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.134 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .as = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.134 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / flashservices/gateway / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.134 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / cfform-internal / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.134 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / flex-internal / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.134 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / CFFormGateway / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.134 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / cffileservlet / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.134 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / cfformgateway / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.134 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / CFFileServlet / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.134 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / flex2gateway / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFML / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *.cfml / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFML / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFM / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *.cfm / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *.cfc / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFC / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFC / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFM / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / rest / * = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / flex2gateway = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .hbmxml = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .cfswf = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. Cfswf = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFSWF = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.149 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .mxml = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.165 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFML = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.165 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFML = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.165 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .cfml = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.165 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .cfm = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.165 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. Ft3/min = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.165 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .cfc = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.165 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFC = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.165 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFR = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.165 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFR = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.180 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. CFC = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.180 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .swc = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.180 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / *. Ft3/min = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.180 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .sws = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.180 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .jsp = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.180 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .cfr = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.180 2015] [8028:3128] [debug] find_match::jk_uri_worker_map.c (984): attempting to map the context URI ' / * .as = nrctrkdev' source 'uriworkermap '.

  [Fri Jul 17 12:12:08.180 2015] [8028:3128] [debug] handle_notify_event::jk_isapi_plugin.c (2402): [/csts_test/]

  Both basic authentication and Windows authentication require that the directory with the isapi_redirect.dll to have permissions that are defined so that user authentication has reading/performance. This solves the problem.

• "Failed to process the backup file" - bookmarks JSON file

  I deleted my appdata files without thinking and then allowed my trash. When I opened firefox again all my favorites have disappeared. I used piriform recuva to find my deleted files and recover the backup JSON files 10 bookmark. When I try to restore my bookmarks, I get the message "failed to process the backup file". "Files are 95 KB in size, but when I open them with Notepad that they are empty, however, when you use the Restore tool, it is said ' elements of 480", which I assume is the amount of bookmarks, I had, which means that firefox can see data. The same happens for all ten backups that I recovered.

  Any help would be appreciated.

  What is the name of this file?

  Firefox can only look at the file name for the number of items.

  • < number > _ < hash > .json bookmark-YYYY-MM-JJ_

  The files in the bookmarkbackups folder are currently in compressed format .jsonlz4 (i.e., they show data binary like a ZIP compressed archive) and cannot be easily unzipped for access the JSON text format.
  The files are compressed means that a single error in the file will make it impossible to unpack the file.

  Have you checked all the available JSON backup to see if everything works?

  A backup created manually JSON is always not compressed, so can be easily inspected or opened in a text editor (Notepad > "Pretty Print"), but with a compressed file, it is much more difficult.

  Recovery of a file via an undelete utility is no guarantee that the space occupied by the file has not been used by another file, and so is corrupt.

• When I try to restore my bookmarks I get the message "Failed to process the backup file."

  I lost my favorites and when I try to get back them, I can see the backup files in the recover window, but when I try to restore my bookmarks I get the message "Failed to process the backup file." Can help you? Thank you

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

• Failed to open the Works document after Windows Update

  Original title: failed to open the works document, after a month of update.__9 of configuration of microsoft of 350 pages. Help!

  no change...

  Hi SILLIVEN,.

  1. what exactly happens when you open the works document?
  2. do you get an error message?

  Try these steps and check the result.
  Step 1: Update remove recently installed
  a. see remove an update
  b. Once you have removed the update, restart the computer.
  c. open work document and check if the problem persists.

  Step 2: If the problem does not persist after the removal of the update, try to install updates on hold by turning off all non-Microsoft programs and check the result. To do this, try the following steps:
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. install the updates. See the updates Windows Installer
  d. Once you have installed the updates, the article, follow "step 7: reset the computer to start as usual.
  e. check if the problem persists.

  For further assistance on Microsoft Works, please post your request here: http://www.microsoft.com/products/works/support.mspx

  Visit our Microsoft answers feedback Forum and let us know what you think.

• B2B 11 GR 1 matter unable to identify the EDI document via the channel look file

  Hello
  
  I was wondering if someone might have encountered this problem, I see a bit of noise on this forum about recognition of documents, and this may sound familiar to some of you...
  
  It is necessary to configure B2B 11 g (11.1.1.2) to query a file from a certain location. In 10g, there is an option to create the directory name of the poll with a certain convention %FROM_PARTY%_TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.edi etc., but this option is totally removed from 11 GR 1 material, so the only option is to go for changed file name (with the same format as above).
  
  Now I have to deal with incoming EDI files, so creaed the file with the above names naming convention and configured a channel listen to extract the file. The EDI file is simple with normal elements of ISA, GS and functional group, also passing thro validation documents Editor. B2B pulls, Archive it, but during the identification phase, he simply out craps with the following messages in the journal:
  
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: []
  intNode name: Interchange
  ]]
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: ISA Key = InterchangeControlVersion Val = 00401
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: ISA Key = InterchangeReceiverID Val = XXXXXXXX
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: ISA Key = InterchangeReceiverQual Val = 12
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: ISA Key = InterchangeSenderID Val = YYYYY
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: ISA Key = InterchangeSenderQual Val = 08
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: ISA Key = InterchangeUsageIndicator Val = T
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: standard = X 12
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: number of nodes group = 0
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processNode: number of nodes to Exchange > 1
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] [EDIDocumentPlugin: processNode: counterProperties >]
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: identifyIncomingDocument: no IDE or HL7
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: identifyIncomingDocument: no IDE or HL7. Return
  [2011-03-16 T 13: 19:11.476 - 04:00] [soa_server1] [ERROR] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@2fa8a24d] [username: < anonymous >] [ecid: 0000Iuz2yY3CwklqwsJb6G1DW8Ew000031, 0] [APP: soa-infra] error -: B2B-50083: Protocol for the identification of the Document error. [[
  at oracle.tip.b2b.engine.Engine.identifyDocument(Engine.java:4203)
  at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:1850)
  at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1395)
  at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:3216)
  at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:2960)
  at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2706)
  at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:540)
  at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:200)
  to oracle.integration.platform.blocks.executor.WorkManagerExecutor$ 1.run(WorkManagerExecutor.java:77)
  to weblogic.work.j2ee.J2EEWorkManager$ WorkWithListener.run (J2EEWorkManager.java:183)
  at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
  
  ]]
  
  I am unable to understand what makes the engine EDI to throw the paper away when everything is in order? Just to clarify, there are also a commercial partnership with ECS, configuration files and agreements XSD.
  
  I see a similar discussion at 11g - inbound configuration for any group or no header Exchange with no resolution.
  
  Pointers?
  
  Concerning

  B2B understood the agreement to be executed in spite of not providing the name file name or dir (% TO_PARTY % etc...) convention. Remains to be seen if they made any changes specific to the PS2.

  Essentially arrivals, file name or directory name is used to identify the TP which sends the document, but there is in the case of EDI and other parameters that can be used for the identification of TP as ISA and GS headers. So, even if the identification of TP with the help of file name or directory name fails, always TP can be identified on the basis of present envelope parameters in the EDI message. You can view-

  http://www.b2bgurus.com/2007/08/trading-partner-identification-in-EDI.html

  Above blog is for B2B 10 g and where he mentions some properties to set, but these properties are part of the product of g 11 B2B itself and therefore, no additional configuration is necessary.

  Finally I discovered that the problem of managing EDI is the line breaks. When I provide the entire load in one line, the B2B is able to implement the agreement, but when I the segment using line breaks separate the same error is thrown.

  IDE itself is a delimited file that uses it's own delimiters (known as o delimiters EDI separators) to separate the segments, elements etc. Even from every part of the IDE has fixed length designed in ecs file. If you insert a line break between the two, then this file will become invalid because you're characters additional ading inside (line break is a character) and engine EDI will not be able to analyze this document. This is according to the standard guidelines and nothing specific to Oracle B2B. So do not add in additional characters (including line breaks)

  Kind regards
  Anuj

• Unable to process the pdf for ledger with 100's of links

  Runing Mac OS10.68 with CS5 (completely up to date). Work on a catalogue of big 800 + pages - which, through indesign, has all the links added to "see page" etc. etc. and index of links for paragraphs.

  Come to write the enitire in PDF book and on all Mac - 3 years with 6 GB of ram iMac, aged 9 months 3.33Ghx 6 core with 16 GB ram Mac Pro pdf written process ends at page 669.

  Which leaves me with an option - write the book into two parts and then edit links in Acrobat for those links that broke trying to connect for the first section to the second and vice versa - hardly ideal or own.

  Way interesting page 669 pdf without these problems when the book is divided in two.

  My conclusion is that it is a problem of software as new and old and more or less power/RAM seem to make no difference (apart from speed to abandonment on page 669)

  Any thoughts welcome

  You cannot export the entire book to IDML, but you can export the

  document containing p. 668-671. But before that, I would say

  you try omitting this file of the book and see if the overall export works.

  It is there is a single file that causes the problem.

  I don't suppose the page which is de-energized cannot be the problem since

  your statements, no.

• I can't select the option document split with CS6

  Hello. I have Indesign CS5.5 on PC but I worked on a document with the trial of CS6. I put a table of contents (in the UI, not in the pages of the book).

  I'm ready to export the document. In CS5.5, I have the possibility to check the Document to export the paragraph Style , and then select the style that I want my book to be split at. It still works fine.

  However, when you use the CS6 to export to epub, I select the Advanced tab. The Split Document box does not list the style I want to use to split the document.

  She has just body text, chapter title, intro/outro and based on the export of Style Paragraphy tag. Why can't select the style I want is in my document?

  Is this a limitation of the trial?

  In CS6, you now have the ability to choose several paragraph styles where you can break a page. Open the paragraph Styles Panel. In the Panel menu, choose change all the tags of the export. In the dialog box, see Split EPUB next to each paragraph style where you want the EPUB file to create a page break (new XHTML file). When exporting, in the Document Split menu, choose export tags to paragraph Style to light.

• Failed to create the menu popup JavaScript with to display the context Menu with the help of add behaviors

  Whenever I load a page with this added behavior and test it with my link, I get a message "error on Page".
  
  Here's what I do:
  
  Create a new HTML page in Dreamweaver 8.0.2 and save it.
  
  Add a hyperlink in the Insert-> menu hyperlink. Do not put anything in it except a few example of text; "THIS IS a TEST", or something.
  
  Select the hyperlink and choose "Show the context Menu" in the tag behaviors menu tab ' + '. The dialog box will appear.
  
  Add a single item and add a link to a page. Do not change the other options. Click OK to close the dialog box and the code will be added to the page.
  
  Save the HTML page again and press F12 to load the page on your test server and display them in a browser.
  
  Hover your mouse over the link to test. Nothing happens and there is a message in the status bar at the bottom of the browser, "error on Page".

  OK, it works. I saw the source file that are listed there, but I assumed that Dreamweaver would be to download the file with the HTML file to test on my test server. Usually, I'm prompted to download all the dependent files. Is there an exhibitor or dreamweaver do not miss this link?

  I'm sold on convictions explained in the rants you have linked, but only after I see that Dreamweaver menus don't work. It is not entirely necessary for my completely dependent users of my menus, they are only a feature of page layout.

  Since I have the ear, maybe you could tell me something before my attempt it: is it possible to generate the JavaScript using PHP? I would like to include JavaScript in the context of records with PHP MySQL. Is there another possible solution from PHP? I guess that ASP is a solution already and maybe Flash too.

  This is the kind of page I'm working on that:

  http://www.symbiota.com/MiloTrial/witnesses.php

  I would like to see a drop down menu for each trial where the number of witnesses is less than 10 to save someone the trouble to open a new page just to see a list of ten names.

• All my favorites lost their URLs. You try to restore a backup has failed with "failed to process the backup file". It's beta channel 10 of Firefox. Does anyone have a solution?

  Initially, the list of bookmarks included all my favorites, but they had an empty box for their icon and clicking the Properties window showed no name or URL. Click on the bookmark itself was simply ignored. I went to restore from a backup bookmarks - backups are displayed for each day, but choose one gives an error. It has also removed from the list of bookmarks.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_places-database-file

• Satellite R830-1GZ: ConfigFree Radar fails to display the networks without wire with the same SSID

  I have a new R830-1GZ Satellite with Windows 7 and a (much) older Portege M300 - all have two versions of Radar on them.

  However, while the old machine display correctly anywhere wireless and signal forces - even when there are multiple places with the same SSID - I use Powerline Extenders to extend coverage, the new machine with the last RADAR doesn't seem to be able to cope with these multiple identical wireless spots and fails to show more than one at a time - and then reliably.

  I should add that both machines work quite well in fact using the same SSID points connecting to the stronger.

  Is there a utility round way this or another that correctly displays it available different SSID and strength.

  Thank you very much

  Bill

  > Is there a utility round way this or another that correctly displays it available different SSID and strength?

  As far as I know there is no other Toshiba utility that could manage wireless networks and display devices Bluetooth as ConfigFree don't.

  I found some useful Q / A ConfigFree regarding:
  [ConfigFree: answers Questions &: http://www.toshiba.eu/innovation/solution_content_article.jsp?z=42&SOLUTION_ID=Conf igFree_QandA]

  Look also in Toshiba's technical knowledge base and search for Configfree for useful documents.
  http://www.Toshiba.EU/innovation/generic/TKB_SUPPORT/

• AnyConnect error: failed to process the error response

  Hello

  I couldn't connect from a client stand alone of anyconnect to asa.

  Customer displays error message "Unable to process response from x.x.x.x".

  ASA webvpn anyconnect debugging does not display debug information.

  However http debugging below shows

  EVET-5580-022 (config) # HTTP: treatment given to the legacy server [/] admin
  HTTP session: checked = [0]
  HTTP: treatment GET URL ' / ' by the host of mymachineip
  HTTP: redirect to: /admin/public/index.html
  HTTP session: checked = [0]
  HTTP: treatment GET URL ' / admin/public/index.html' host mymachineip

  HTTP: authentication is not required
  HTTP: file not found: public/index.html

  I use 2.5.0217 customer. Also joined the tunnel configurations and group policy.

  Can someone let me know what is the problem?

  Thank you

  Radhika

  Hi Rahika,

  The URL that we see in him debugs are associated with ASDM.

  I see that you have the WebVPN IDE oucederomsurlesecondport 600 installation program. Are you sure you put the correct on the client port when you try to connect?

  The URL you put in the Anyconnect client should look like this:

  X.X.X.X:600

  If it stil does not work or if you did already, let me know and I'll have a deeper look at your config.

  Kind regards

  Nicolas

• Connection failed when open the SH.rpd online with OBI administration tool

  I have a sameple that sh. Deployed DPR and OBI servers are uprunning on a Redhat Linux 5 box. The administration tool on a planter, I tried to open the RPD online, but get the error message connection failed. I was using the same name of user and password I used in offline mode to connect the RPD even.
  
  When the failure of the online connection, I tried to connect offline with the same credentials. I received a warning from read-only, but be able to connect to.
  
  What is wrong here that I can connect offline but not online. Some security configurations on the server side is involved?
  
  Thank you

  I have a DSN configured in the window box and be able to import database objects.

  Certainly, you create the DSN with the 'Oracle BI Server' driver?

  When you create or change the DSN, try checking the 'Connect to Server BI Oracle to obtain default settings for the additional configuration options' and click Next. If your DSN is correct, you will get another screen. If not you will get a more descriptive error message, e.g. «...» Authentication failed... «or «Could not connect to port 9703...» "etc.

  What do you mean by "import database objects"?

  Connection mode is suppose to have the same password online?

  Yes

• I did the update of firefox Windows 10 and now, my favorites are GONE! It says: failed to process the backup file. When I try to restore the "old" library.

  Firefox did an update to 'work seamlessly with Win 10'. When Firefox is restarted, ALL MY FAVORITES HAVE DISAPPEARED. I went to the library and tried to restore the bookmarks. It won't! I have a system of computer backup, but no. CLUE where to find my favorites. So frustrated. I have used Firefox for a ton of years and never had my favorites disappear.

  Chick.Merkel said

  Firefox did an update to 'work seamlessly with Win 10'. When Firefox is restarted, ALL MY FAVORITES HAVE DISAPPEARED. I went to the library and tried to restore the bookmarks. It won't! I have a system of computer backup, but no. CLUE where to find my favorites. So frustrated. I have used Firefox for a ton of years and never had my favorites disappear.

  Well well... after Google search more, I discovered that there was a 40.0.02 update. I did and now my favorites are back.

• Lost bookmarks do not recover, system shows "failed to process the backup file ' how to solve?

  The ability to access saved previuosly bookmarks disappeared recently. I work in the system to get a restore from an earlier date (10 files appear), but to all the world I get the message - Impossible to treat the backup file - I think that this has coincided with a recent update. Are you able to help?
  Carl

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.com/kb/bookmarks+not+saved#w_places-database-file
  • http://KB.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox