Satellite R830-1GZ: ConfigFree Radar fails to display the networks without wire with the same SSID

I have a new R830-1GZ Satellite with Windows 7 and a (much) older Portege M300 - all have two versions of Radar on them.

However, while the old machine display correctly anywhere wireless and signal forces - even when there are multiple places with the same SSID - I use Powerline Extenders to extend coverage, the new machine with the last RADAR doesn't seem to be able to cope with these multiple identical wireless spots and fails to show more than one at a time - and then reliably.

I should add that both machines work quite well in fact using the same SSID points connecting to the stronger.

Is there a utility round way this or another that correctly displays it available different SSID and strength.

Thank you very much

Bill

> Is there a utility round way this or another that correctly displays it available different SSID and strength?

As far as I know there is no other Toshiba utility that could manage wireless networks and display devices Bluetooth as ConfigFree don't.

I found some useful Q / A ConfigFree regarding:
[ConfigFree: answers Questions &: http://www.toshiba.eu/innovation/solution_content_article.jsp?z=42&SOLUTION_ID=Conf igFree_QandA]

Look also in Toshiba's technical knowledge base and search for Configfree for useful documents.
http://www.Toshiba.EU/innovation/generic/TKB_SUPPORT/

Tags: Toshiba

Similar Questions

  • Satellite R830-1GZ - CPU usage high (> 25%) and increase in the speed of the fan after reactivation

    Hi all

    The CPU usage of my laptop shoots upward to 25% (and beyond) and increases in fan speed considerably after waking up, but only when I use an external mouse (Microsoft Natural Wireless Laser Mouse 6000) - disconnect the mouse once it happened does not solve the problem, so I always have to restart my computer if I let go sleep with the connected mouse.

    I noticed that when this produces the system interrupts - delayed appeals procedure and Interrupt Service routine appears in the resource monitor > CPU > process and seems to explain the increase in the use of the processor.

    Any ideas on how to solve this problem would be most appreciated.

    I use a Toshiba Satellite R830 1GZ with Windows 7 (64-bit). This problem will not occur when I use the same mouse with another laptop (Dell with Windows XP).

    Thank you very much.
    CM

    > The CPU usage of my laptop shoots upward to 25% (and beyond) and increases in fan speed considerably after waking up, but only when I use an external mouse (Microsoft Natural Wireless Laser Mouse 6000) - disconnect the mouse once it happened does not solve the problem, so I always have to restart my computer if I let go sleep with the connected mouse.

    I think that the process that controls the mouse MS WLan does not close properly.
    The system to memorize it and therefore the cooling module begins to spin faster because these processes stressed the central unit.

    Maybe its caused by the mouse driver
    Have you checked if there is an update to the driver?

  • Need to install KB947821 update but fails and displays the error 9370001 code

    You will need to install KB947821 update but fails and displays the error code 9370001.  Does anyone have a solution?

    CrystalBall © SEZ...

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • HP Officejet Pro 8600 more e-A: printer only prints blank sheets with a footer only. In preview mode BEFORE PRINTING displays the same.

    Printer only prints white sheets with a footer.  In preview mode BEFORE PRINTING displays the same.

    Used HP Print prints doctor and TEST PRINT correctly and find the Wi - Fi of my printer.

    Problem started right after that MS has downloaded?

    No, it did not apply to Notepad.  I restarted just after MS update and everything printed correctly again.  I had not done so to preserve Web pages active I tried just several days!

  • Link to graphic images and display the same image on two different series

    I create a brochure DIN A5 landscape (l x h - 210 x 148) that has two pages each Board. Now, I want to connect two graphic frames on two different series (starting page 4 continued on page 5) to display the same image. This image is then next to each other after printing.

    Please take a look at the photos (situation and endresult).

    Could you please help!

    Thank you!

    Phil

    CURRENT situation

    link-image-to-another-page_1.jpg

    endresult

    link-image-to-another-page_endresult.jpg

    It is not clear to me that you understand that you should be setting this up as a file "facing pages" where each page is half of a spread, not the full-spread by page you started with. In order to impose the pages must be independent of each other in the file.

    From the screen shot it seems that when folded your book will be A5 landscape format, so if this is the case, you will want to set up as faced with pages A5 landscape. Guests will have a single page for the first and last pages, and the rest will be displayed as two-page spreads, just like your reader will see them. Given that this seems to be a folded booklet, you should also keep in mind that the number of pages should be a multiple of 4 - two sides of two pages per sheet.

    To a printer you will probably offer a PDF file, exported as a single document with individual pages in the reading order. If you want to print yourself, InDesign has a module simple integrated tax called booklet print in the file menu.

  • Satellite A200 and Configfree Radar

    My laptop is connected via WiFi, but Configfree Radar is not able to 'find' any WLAN. Where is the problem?

    Hello

    Are you sure you are using the WiFi radar and not the BT radar?
    There are two different functions.
    So make sure that you have switched to the Wlan radar!

    Best regards

  • Satellite L300 - driver Open Webcam fail. Restart the computer or the camera

    Hello

    I recently bought a new Satellite L300 under Windows Vista Home Premium SP1. The Webcam worked fine for a few days and then the next time I booted up Vista, I get the following error "Webcam driver open fail, please restart camera or computer. Since the computer is new I reformatted to see if it wasn t a program is blocking something.

    Reformat 2 times and the error still ride on the installation of the Camera Assistant Software for Toshiba. I downloaded the update from Toshiba support file but still the same error. The funny thing is that the Device Manager does not detect even the webcam. There is no registration for the webcam. How will I know that it is a hardware problem? Does anyone have experience with this problem?

    The store that I bought it offered to give me a new, but do not have any in stock, so I have to wait 3 weeks.

    Thank you

    Hello

    The webcam must be listed in the Device Manager. It s not called not webcam but you should find it in the imagery of the devices-> USB video device

    The webcam should work fine. Usually after installing the webcam software, you should find the webcam software in the MSCONFIG-> startup
    If the webcam is listed here then that would mean that the software/driver webcam still load during a laptop boot procedure.

    In some cases there could be a compatibility issue between this software and a 3rd party applications like MS messenger or Skype for example.

    In your case, I recommend you to disable the webcam and other applications such as MS messenger or Skype software in MSCONFIG-> startup.
    Then clean the BONES and the registry using the CCLeaner.

    I also recommend the Vista update to the last State. All fixes and patches must be installed!

    Finally if you want to use the webcam then you could start the software manually.
    Exe file must be placed in Camera Assistant Software.

    Best regards

  • Satellite L650D Webcam driver open fail. Restart the computer or the camera

    Hello, I did a clean install of windows 7 x64bit installed the driver for the webcam, but I can not use my camera I have Webcam driver open fail. Restart the unit photo or computer... can someone help me?

    Hello

    I think the problem is the new facility
    You must install the VAP (value added package) first more I recommend to choose the latest version of the driver/software webcam
    In the driver Satellite L770D download area you can find the Webcam driver v 2.0.0.21 for Win7 64 bit

  • 6.1 VDP on vSphere WebClient 6.0 fails to display the status of recent tasks (VICLIENT shows something completely different... real information!)

    Hello

    Running vCenter 6.0 and 6.1 VDP and after launching a backup job (via web client vSphere) I can see the beginning of the task, but only using recent tasks of the viclient (IT IS NOT display any status or progress via the web client).  Now what makes this problem, a question is that of the virtual machine, I didn't go to the backup task to create a shapshot.  The ONLY REASON I know this is because recent tasks viclient showing the progress of the task of backup drew my attention to the question.  Even after a refresh several times in the webclient service indicates that the work was done, never completed, or FAILURE under section tasks recent.  Research in the section alarms the web client fails also show no indication that there was an instant failure on one of the backup jobs.  The only way to view the State would look at Console tasks in web client I could also see the work and not a backup but unless you have already searched for failure would not have known you.

    It's very relative when VMware push customers to use the web client over and the viclient seems even less we continue losing features.  Has anyone else had this problem with VDP 6.1?  If so is some fix allow some "RECENT TASKS" to actually show the same status in the web client and the viclient (they speak both the same vCenter then why don't they contain the same information?)  Accurate builds I use are the following

    vCenter Server 6.0.0 build 3018524

    POS 6.1.1.19

    ESXi 6.0.0 build 3620759

    And before his suggested the race the POS 6.1.2 (latest version), I've tried and that version had problems more large gel and omitting so I use the version seems to be more stable :-)

    Not sure that you use the same user used in POS configuration page Try connecting web client with the user used to record POS with vCenter.

  • When I go to a particular Web site, certain content (in this case phone number) appears briefly and then disappears. But when displaying the same Internet site in safe mode, the content is visible.

    Question

    I have another type of problem with Firefox

    Description

    When I visit a particular Web site some content (the phone number in this case) appears briefly and then disappears. But when you view the Web site even in safe mode its ok the content is visible

    This has happened

    Each time Firefox opened

    3 days ago

    Troubleshooting information

      Application Basics
            Name         Firefox
            Version         3.6.7
            Profile Directory
              Open Containing Folder
            Installed Plugins
              about:plugins
            Build Configuration
              about:buildconfig
    
      Extensions
            Name
            Version
            Enabled
            ID
            Microsoft .NET Framework Assistant         1.1         true         {20a82645-c095-46ed-80e3-08825760534b}
            Skype extension for Firefox         3.3.0.3971         true
            Xmarks         3.6.7         true         [email protected]
    
      Modified Preferences
          Name
          Value
            accessibility.typeaheadfind.flashBar         0
            browser.history_expire_days.mirror         180
            browser.history_expire_days_min         3
            browser.places.importBookmarksHTML         false
            browser.places.importDefaults         false
            browser.places.leftPaneFolderId         -1
            browser.places.migratePostDataAnnotations         false
            browser.places.smartBookmarksVersion         2
            browser.places.updateRecentTagsUri         false
            browser.startup.homepage         http://www.google.co.uk
            browser.startup.homepage_override.mstone         rv:1.9.2.7
            dom.max_script_run_time         1800
            extensions.lastAppVersion         3.6.7
            general.useragent.extra.microsoftdotnet         (.NET CLR 3.5.30729)
            network.cookie.lifetimePolicy         2
            network.cookie.prefsMigrated         true
            places.last_vacuum         1279193068
            print.print_printer         Samsung ML-2010 Series
            print.printer_CutePDF_Writer.print_bgcolor         false
            print.printer_CutePDF_Writer.print_bgimages         false
            print.printer_CutePDF_Writer.print_command
            print.printer_CutePDF_Writer.print_downloadfonts         false
            print.printer_CutePDF_Writer.print_edge_bottom         0
            print.printer_CutePDF_Writer.print_edge_left         0
            print.printer_CutePDF_Writer.print_edge_right         0
            print.printer_CutePDF_Writer.print_edge_top         0
            print.printer_CutePDF_Writer.print_evenpages         true
            print.printer_CutePDF_Writer.print_footercenter
            print.printer_CutePDF_Writer.print_footerleft         &PT
            print.printer_CutePDF_Writer.print_footerright         &D
            print.printer_CutePDF_Writer.print_headercenter
            print.printer_CutePDF_Writer.print_headerleft         &T
            print.printer_CutePDF_Writer.print_headerright         &U
            print.printer_CutePDF_Writer.print_in_color         true
            print.printer_CutePDF_Writer.print_margin_bottom         0.5
            print.printer_CutePDF_Writer.print_margin_left         0.5
            print.printer_CutePDF_Writer.print_margin_right         0.5
            print.printer_CutePDF_Writer.print_margin_top         0.5
            print.printer_CutePDF_Writer.print_oddpages         true
            print.printer_CutePDF_Writer.print_orientation         0
            print.printer_CutePDF_Writer.print_pagedelay         500
            print.printer_CutePDF_Writer.print_paper_data         9
            print.printer_CutePDF_Writer.print_paper_height         297.00
            print.printer_CutePDF_Writer.print_paper_size_type         1
            print.printer_CutePDF_Writer.print_paper_size_unit         1
            print.printer_CutePDF_Writer.print_paper_width         210.00
            print.printer_CutePDF_Writer.print_reversed         false
            print.printer_CutePDF_Writer.print_scaling         0.70
            print.printer_CutePDF_Writer.print_shrink_to_fit         true
            print.printer_CutePDF_Writer.print_to_file         false
            print.printer_CutePDF_Writer.print_unwriteable_margin_bottom         0
            print.printer_CutePDF_Writer.print_unwriteable_margin_left         0
            print.printer_CutePDF_Writer.print_unwriteable_margin_right         0
            print.printer_CutePDF_Writer.print_unwriteable_margin_top         0
            print.printer_Samsung_ML-2010_Series.print_bgcolor         false
            print.printer_Samsung_ML-2010_Series.print_bgimages         false
            print.printer_Samsung_ML-2010_Series.print_command
            print.printer_Samsung_ML-2010_Series.print_downloadfonts         false
            print.printer_Samsung_ML-2010_Series.print_edge_bottom         0
            print.printer_Samsung_ML-2010_Series.print_edge_left         0
            print.printer_Samsung_ML-2010_Series.print_edge_right         0
            print.printer_Samsung_ML-2010_Series.print_edge_top         0
            print.printer_Samsung_ML-2010_Series.print_evenpages         true
            print.printer_Samsung_ML-2010_Series.print_footercenter
            print.printer_Samsung_ML-2010_Series.print_footerleft         &PT
            print.printer_Samsung_ML-2010_Series.print_footerright         &D
            print.printer_Samsung_ML-2010_Series.print_headercenter
            print.printer_Samsung_ML-2010_Series.print_headerleft         &T
            print.printer_Samsung_ML-2010_Series.print_headerright         &U
            print.printer_Samsung_ML-2010_Series.print_in_color         true
            print.printer_Samsung_ML-2010_Series.print_margin_bottom         0.5
            print.printer_Samsung_ML-2010_Series.print_margin_left         0.5
            print.printer_Samsung_ML-2010_Series.print_margin_right         0.5
            print.printer_Samsung_ML-2010_Series.print_margin_top         0.5
            print.printer_Samsung_ML-2010_Series.print_oddpages         true
            print.printer_Samsung_ML-2010_Series.print_orientation         0
            print.printer_Samsung_ML-2010_Series.print_pagedelay         500
            print.printer_Samsung_ML-2010_Series.print_paper_data         9
            print.printer_Samsung_ML-2010_Series.print_paper_height         11.00
            print.printer_Samsung_ML-2010_Series.print_paper_size_type         0
            print.printer_Samsung_ML-2010_Series.print_paper_size_unit         1
            print.printer_Samsung_ML-2010_Series.print_paper_width         8.50
            print.printer_Samsung_ML-2010_Series.print_reversed         false
            print.printer_Samsung_ML-2010_Series.print_scaling         0.70
            print.printer_Samsung_ML-2010_Series.print_shrink_to_fit         true
            print.printer_Samsung_ML-2010_Series.print_to_file         false
            print.printer_Samsung_ML-2010_Series.print_unwriteable_margin_bottom         0
            print.printer_Samsung_ML-2010_Series.print_unwriteable_margin_left         0
            print.printer_Samsung_ML-2010_Series.print_unwriteable_margin_right         0
            print.printer_Samsung_ML-2010_Series.print_unwriteable_margin_top         0
            privacy.clearOnShutdown.downloads         false
            privacy.clearOnShutdown.formdata         false
            privacy.clearOnShutdown.history         false
            privacy.clearOnShutdown.sessions         false
            privacy.cpd.siteSettings         true
            privacy.item.cookies         true
            privacy.sanitize.migrateFx3Prefs         true
            privacy.sanitize.sanitizeOnShutdown         true
            privacy.sanitize.timeSpan         0
            security.warn_viewing_mixed         false
    

    Version of Firefox

    3.6.7

    Operating system

    Windows XP

    User Agent

    Mozilla/5.0 (Windows; U; Windows NT 5.1; en - us; RV:1.9.2.7) Gecko/20100713 Firefox/3.6.7 (.NET CLR 3.5.30729)

    Plugins installed

    • -Version 1.2.0.0
    • NapsterLink
    • 6.0.12.1675
    • RealPlayer LiveConnect-Enabled plug-in
    • Netscape Plugin RealJukebox
    • Adobe PDF plugin for Firefox and Netscape
    • The QuickTime Plugin allows you to display a wide variety of multimedia content in Web pages. For more information, see the Web of QuickTime site.
    • Default plugin
    • Google update
    • Shockwave Flash 10.0 r42
    • Adobe Shockwave for Director Netscape plug-in, version 11.5
    • Plugin Picasa
    • Windows Presentation Foundation (WPF) plugin for Mozilla browsers
    • Npdsplay dll
    • DRM Netscape Plugin store
    • DRM Netscape Object network

    Problems with phone numbers does not display correctly can be caused by the Skype extension (Tools > Modules > Extensions)

    See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems

  • Satellite Pro L450 - network without WIRE Realtek RTL8191SE adapter: limited access

    Hello

    Hoping you can help me with my problem with the wifi connection.

    OS: Windows 7
    Wireless adapter: Realtek RTL8191SE Wireless LAN adapter
    Laptop: Toshiba Satellite Pro L450
    Wireless router/modem: Cisco

    When I turn on the laptop the wifi connection can work for 10-30 minutes, but then the down network access but remains connected with limited access.
    Then restart the connection will have access limited the offset.
    In addition, sometimes the available wireless connections do not show in the networks available on the windows toolbar.
    When you use the Ethernet cable connected to my router there is no problem.

    I have searched the forums for help on this and have already tried without success, the following

    Updated driver: issue date may 2010
    Verify that TCP/IP has been installed to automatically obtain the IP and DNS
    Disabled firewall
    Reset the modem
    Countless reboots of the modem and the laptop

    Wireless modem/router works perfectly as I can connect with other devices and laptops.
    Is it a problem that we see on a regular basis with this combination of laptop card / without wire/operating system?
    Would appreciate any guidance you can give me as it becomes very frustrating.

    Thank you

    Kieran

    Hello

    I see you didn't check the BIOS!
    Here you can compare the BIOS with the version update available.
    If you have an older version of the BIOS on the laptop, then an update would be recommended.
    Once the update to the BIOS it defined it please to the default settings (press BIOS F9 and save)!

    By the way:
    http://APS2.toshiba-tro.de/WLAN/?page=downloads
    Here you can find the latest WLan driver
    It s v.2015.1.0427.2010 at the moment

    PS: I hope that Windows 7 is up to date...

  • SQL Loader failed to load the same source sometimes data file

    I meet different types of data, loading errors when you try to load data. What makes it really annoying, is that I'm not able to identify the real culprit since the success of load depends on the amount of lines in the source data file but not its content. I use dataset Toad export feature to create delimited data set. When I decided to take the first 50 lines then succeeds data to load into the target table. When I decide to take the first 150 lines then the data to load into the target table fails indicating that:
    Record 13: Rejected - Error on table ISIKUD, column SYNLAPSI.
    ORA-01722: invalid number
    I can see .bad file that the same line has been loaded successfully when the data file that contains 50 rows was used. The content has no column for this particular row is NULL (no chain).
    I suspect that the toad generates faulty delimited text file when taking 150 lines. File data for reasons of confidentiality, I can't show. What can I do? How can we all further investigate this problem? Size of the array that must be loaded by SQL Loader is almost 600 MB. I use Windows XP.

    Published by: totalnewby on June 30, 2012 10:17

    I do not believe that customer sqlloader 11g allows you to load a 10g database. You can run sqlldr on the server of database 10g itself? PL also post the rest I asked information

    HTH
    Srini

  • Displaying the same Image in two different Image controls

    We use 2 Flex to dynamically display a large image (2 MB +) that is downloaded from an external web server on a different domain. We would like to take that same image, to scale down and post it in along side the version full size of the image in a thumbnail viewer bit that we wrote. This works very well that if I put just the attributes of the source on the two controls Image to the same URL, however, this results in the Image being uploaded twice. Since the image is so large, it is not very desirable behavior.

    Another option that we tried is cloning the bitmapData after one of the images has finished loading and then put back the clone for the second image.

    private void image1Loaded(e:Event): void
    {
    var bmp1:Bitmap = Bitmap (image1.content);
    Image2.source = new Bitmap (bmp1.bitmapData.clone ());
    }

    The problem with this method is that, since the image is downloaded from a server with a different area of our web server, a security sandbox exception is thrown. Because we have no access to this web server, using a crossdomain.xml file is not an option. We looked at the image transmission by proxy through our web server, but given the size of the image, this isn't the best solution either.

    Does anyone know how to do what we try to do without generating a security exception? We don't need to change the image anyway, we just want to display it inside two different Image controls without having to download it twice.

    The image must not be downloaded twice. Flash Player is very picky about it because of the problems you mention. If you download an image from a specific URL and then try to do it again, the image will be have been cached.

    However, if you do this: the image can indeed be charged twice. Why? Because the 2 requests are sent at the same time because no image has been loaded. This translates into the image loaded twice.

    If you have a large image to display, wait for it to load once before the second request. Complete event of the Image will tell you when its bytes have been received.

  • display the same value in a times column in multiple lines

    Dear all:

    I have a table id, with the following data values

    ID VALUES
    ===============
    EG001 5888314
    EG001 5888315
    EG001 5888316
    EG002 5888317
    EG002 5888318


    I want to display a query to display the result as follows:

    ID VALUES
    ===============
    EG001 5888314
    5888315
    5888316
    EG002 5888317
    5888318


    Kind regards

    Hassan

    Hello
    Try:

    WITH test_tab AS (
    SELECT 'EG001' REC_ID, 5888314 VALUE FROM DUAL UNION ALL
    SELECT 'EG001', 5888315 FROM DUAL UNION ALL
    SELECT 'EG001', 5888316 FROM DUAL UNION ALL
    SELECT 'EG002', 5888317 FROM DUAL UNION ALL
    SELECT 'EG002', 5888318 FROM DUAL)
    -- end test data
    SELECT LTRIM(CASE WHEN row_num = 1 THEN REC_ID ELSE NULL END || ' ' || VALUE) VALUES
      FROM (
    SELECT REC_ID, VALUE,
         ROW_NUMBER() OVER (PARTITION BY REC_ID ORDER BY VALUE) row_num
      FROM test_tab)
    
    VALUES
    ----------------------------------------------
    EG001 5888314
    5888315
    5888316
    EG002 5888317
    5888318
    
  • Satellite R830-1GZ - Microphone does not work

    Hello

    I did have this machine that long, but when I got the microphone worked without a doubt that I had talked to a few people on Skype. Now, I can't make it work.

    I tried the things:
    check in the Device Manager to see if something is off or broken
    reinstall audio drivers
    Reinstall the webcam
    reinstalling Skype

    other tips greatly appreciated.

    Vick

    When you open sound properties and recording tab is microphone that there are listed?
    If yes what is micro-default as peripheral?

Maybe you are looking for