Failed to start the export. 6.53 in addition, GB of free space is required on e:\exports\sbs01.export--->; Replay.Core.Contracts.Export.ExportException: cannot run an export job
Thus,.
We had a server running gladly watch exports virtual Hyper-V, and then abruptly stopped, export and complaining saying she needed of more space to complete.
Drive E had about 30 GB free (at the time) and the incremental backups between work and default were about 2 GB.
I have since deleted the virtual Eve, because sometimes I saw Appassure get confused and rather than wait for a response from support (see below), I did export it to create a new.
It says that I need 26 GB of free disk so cannot start. I mounted the backup from before she failed and after and they have the same size, in fact, some readers have less actual data on them.
I realize file sizes don't equate to blocks used, however, as mentioned above, between work / failing the differential was 2 GB and export in car had even 30 GB free.
I have updated the patch 3 to see if it was a hidden problem, it wasn't
Guess the questions are
- No idea why this happened?
- She always thin build records to export.
The Source data used is less than the amount of space available, however the sizes the drive on the source server is greater (again, no change between work & fail)
I have an open ticket, has a status of waiting for me, can't see why he's waiting for me that I have not asked anything, but guess it helps ALS
so it turns out that the real reason, that it was a failure was due to running sums. Basically, when you get a combination you find yourself with a greater differential earlier in the chain but after base was taken.
Since the amount of free space must be sufficient for the largest differential and that the area has increased just here a potential requirement for base images to take
That said, there is a fix to try, I took a new base image before I could deploy I need virtual Eve work
Tags: Dell Tech
Similar Questions
-
DSC error: IAK_SHARED failed to start the service
When I try to deploy a shared variable library, she fails to deploy and gives me the following message: error:-1967362042, IAK_SHARED: (Hex 0x8ABC7006) failed to start the service. I'm using LabVIEW 8.6 with DSC 8.6. I tried to run one of the examples (the example of the heat exchanger). Any ideas? I have LabVIEW 8.5 installed as well (many of my clients are still using it), and I got 8.5 installed DSC. Shall 8.5 DSC be uninstalled everything first?
Thank you
Tom
Hi Tom,
This means that your installation is corrupted and some components SQL do not settle down with it. I would advise to uninstall completely and then put it back using the installation CD you have. I hope this helps.
Gregory C.
-
Ideas:
- You have problems with programs
- ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hi sanjeevkode,
Thank you for visiting the website of Microsoft Windows Vista Community. As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.
VMware communities: http://communities.vmware.com/home.jspa
In the meantime I suggest you try these options / methods
IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.
Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start
Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID
Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you
Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.
The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.
Let me know if it worked.
Hope it will be useful.Thank you and best regards,
Vijay K - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
Windows search Windows failed to start the service on the Local computer
OK, so it's a big, dirty and convoluted issue, so please bear with me. Any help is greatly appreciated! I start tearing my hair out on this one...
I'm on Windows 7 Professional 64 bit
UAC is set to the lowest level 2The other day I have problems with the search box in the start bar. It is more was to find excel or other office applications and also he wouldn't orders base as cmd or Notepad. Whenever I run a command it returns an error like this (not exact because I have the exact error message):
Windows cannot find ': search query = cmd'
I searched a little and tried to rebuild the index in Control Panel > Indexing Options. It does not work so I uninstalled Windows Search and reinstalled. What I found now, is that the indexing service would not start and if I tried manually start from services.msc I would get the following error:Windows search Windows failed to start the service on the Local computer
Error 161: the specified path is not validThe event log showed me this Application error:
Cannot initialize the Gatherer service.
Details:
The Temp folder is on a drive that is full or inaccessible. Free space on the drive or verify that you have permission write to the Temp folder. (HRESULT: 0 X 80070660) (0 x 80070660)
Help!
Thanks Samhrutha.
Your proposed solution of editing the registry is the only solution I found to this day and still work.
The only drawback that I want to emphasize is that this fix causes completely reset to its default settings of windows search. Customizations to search what have been done by the user (e.g., windows search indexing user customizations options) will be lost.I am running Windows 7 Pro 64-bit and occasionally experienced the same error message ( windows cannot find ': search query = XXX ", where XXX corresponds to my search query) try to search through windows when start menu search box.
Only recently, however, discovered one other cause possible/fix to this problem.
Specifically, I discovered that the error of windows search resulting from the ADDITION of a NETWORK LOCATION on the local computer (for example, via the menu option "Add a network location" that appears when you click the file menu in a window of windows Explorer displays the contents of the local computer (corresponding to the "COMPUTER" icon). The CENTER of my computer SYNC settings have been defined to disable the synchronization of network or file 'offline' and I suspect that this setting is also part the cause of the error of research.To resolve this problem, simply tell windows search not to include the 'network' location in the search index. To do this, one needs to access the settings of the windows search INDEX LOCATIONS (via Indexing Options-> change), then uncheck the box next to the network location (which on my computer starts as follows: oneindex: / / {s-1-5-21...)
After unchecking this box, click on the OK button and then CLOSE the button to exit the Options of Index window. After that the error message should hopefully not return. If so, try restarting the computer and research to test again.
Hope this helps!
:)
~ rx
-
Original title - help help help me please
why I opened my computer it appears a message that "failed to start the audio driver of Dolby. Please restart your computer or reinstall the driver if the problem persists ". and I could not open Windows media player. What should I do now? who can help me please?
Hello
Go Device Manager... Sound, video and game controllers, and see if you have triangles yellow error next to your audio devices...
My guess would be that you need to update the drivers for your audio devices.
You should be able to find the drivers + Support Web site for your computer model...
If not, find the number\model Audio chip and watch there chip manufacturers website for updates...
I don't know if the audio problem is a single chip, or is part of your graphics device...
If you don't find anything wrong in the audio, you can check that.
-
Failed to start the computer over HTTP: Error 1000
I'm testing an upgrade from version 2.9 to 2.10 so I can upgrade our 6.0u2 ESXi hosts to solve the problem of multiple appstacks slow attachment. However, I get this error on half of my offices. I tried both 2012R2 and for the administration server 2008R2. It is installed with local SQL. Desktop computers are Windows 7, floating pool linked clone. Looks like that in the beginning it shows a "HttpInitializeRequest: status response 200 Manager (2 bytes) ': OK ' but try again"computer startup on HTTP failed: Error 1000 ". Once virtualization fails is disabled and no appstacks cling.
I have logs from two desktop computers, a successful failure:
In case of failure:
[19:24:58.937 2016-03-25 UTC] [svservice:P828:T856] OnCreateSession called (CF 000000000036, 50, Params 0000000000F6E840, context 0000000000000000 manage the ID from Session 1)
[19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (Microsoft format) UUID: F6A62A42-87FE-778B-EA05-F56BBADBCD04
[19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (VMware format) UUID: 422aa6f6-fe87-8b77-ea05-f56bbadbcd04
[19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP session
[19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP connection
[19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Shuffing 1 Manager (s)
[19:25:01.892 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3
[19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] Seed URL: / pre-startup? name = svservice & to uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA01 & machinesid=S-1-5-21-2909739094-3781615540-3712082287
[19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)
[19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0
[19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK
[19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] LogonMount: agent: 0 Manager: 0 or to attach the volumes
[19:25:02.347 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3
[19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] Computer start URL: / computer startup? name = svservice & uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA01 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287
[19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)
[19:30:01.666 2016-03-25 UTC] [svservice:312] WinHttpReceiveResponse the timeout of waiting for response
[19:30:01.666 2016-03-25 UTC] [svservice:P828:T312] Retrying in 5 seconds (expected 300 seconds on 300 max)
[19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] Abandonment of application HTTP after having exceeded the time limit (300 seconds)
[19:30:06.662 2016-03-25 UTC] [svservice:312] Failed to start the computer over HTTP: Error 1000
[19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] HttpComputerStartupThread: failure (starting the computer)
Successful operation:
[19:24:58.843 2016-03-25 UTC] [svservice:P820:T852] OnCreateSession called (Session ID 1, 00000000003CFB60, Params 0000000000F4E880 0000000000000000 context handle)
[19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (Microsoft format) UUID: 72F62A42-0EF6-DBCA-0BE1-DF5682A376C5
[19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (VMware format) UUID: 422af672-f60e-cadb-0be1-df5682a376c5
[19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP session
[19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP connection
[19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Shuffing 1 Manager (s)
[19:25:01.265 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3
[19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] Seed URL: / pre-startup? name = svservice & to uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA02 & machinesid=S-1-5-21-2909739094-3781615540-3712082287
[19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)
[19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0
[19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK
[19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes
[19:25:02.161 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3
[19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] Computer start URL: / computer startup? name = svservice & uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA02 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287
[19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)
[19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0
[19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (34 bytes): START COMPANY\AV210TSTPA02$
[19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] HttpComputerStartupThread: managed (starting the computer)
[19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes
Just curious, it's someone else is seeing this with 2.10 and if you have, how solve you this problem?
If you are using some kind of power management on the VDI? It seems as if the machine is unable to reach the HTTP Appvolumes service for any reason any newspaper which shows success connects withion a fraction of a second if the server doesn't seem to be to busy.
Maybe you try to join an appstack that has some sort of firewall inside rule?
-
FRM-18105: failed to start the help system
Hello
I'm in Oracle Forms 11.1.2.0 you try to start the help system and getting the error message below.
FRM-18105: failed to start the help system.
I have to check the registry entries or system variables?
Thank you
This issue is finally resolved. After I compared the FORMS_BUILDER_CLASSPATH variables in the environment vs registry Variables, I found I was missing C:\Oracle\Middleware\oracle_common\doc\online_help\oracle_forms in the registry. After that I added it it still didn't fix it. Then I found that entry C:\Oracle\Middleware\Oracle_FRHome1\jlib\ewt3.jar was pointing at my old House, so I have fixed to point to Oracle_FRHome instead of Oracle_FRHome1 and my forms launched immediately. Thanks for listening)
-
Help! I installed yesterday the music notes with approximately 900 MB of free space on my iPhone 8 gb 5 c. When I tried to record a song of the trial, I got a message saying that I had no space on my phone. ITunes says I have 2.7 GB on the other! Anyone else had this?
I did a full restore and got 2.9 GB of free space, but in an hour (without using phone at all) I was at 0 MB of free space. Phone is unusable!
Anyone who has had this and what I can do about it?
Since your not sure what the 'others' are I would recommend you to restore your iPhone. I know that you will lose all your data, but not restore from a backup of iCloud so start as a new phone. You can back up your choice and if necessary to write all your contacts on a sheet of paper and then add hide them. Depending on the severity, you want that storage
-
What I really need to buy more FEPs in the clowd to update my creative cloud, my free space I s complete, I am now froced to pay more to use my programs?
Hi TinEriksson,
CC cloud offer free space 2 GB, but if you bought the subscription for one of the CC app you'll get 20 GB space cloud until you have the subscription.
So, if you need more creative space Cloud you must subscribe.
Kind regards
Nicos
-
Hello
I wanted to collect script inventory VM VM name with location, name of the Cluster and data store total size and free space left in Datastore.I have script but his mistake of shows during its execution. Any help on this will be apreciated.
Thank you
VMG
Error: -.
Get-view: could not validate the argument on the parameter "VIObject". The argument is null or empty. Provide an argument that is not null or empty, and then try
the command again.
E:\script\VM-DS-cluster.ps1:7 tank: 20
+ $esx = get-view < < < < $vm. Runtime.Host - name of the Parent property
+ CategoryInfo: InvalidData: (:)) [Get-view], ParameterBindingValidationException)
+ FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutomation.ViCore.Cmdlets.Commands.DotNetInterop.GetVIViewGet-view: could not validate the argument on the parameter "VIObject". The argument is null or empty. Provide an argument that is not null or empty, and then try
the command again.
E:\script\VM-DS-cluster.ps1:8 tank: 24
+ $cluster = get-view < < < < $esx. Parent - the name of the property
+ CategoryInfo: InvalidData: (:)) [Get-view], ParameterBindingValidationException)
+ FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutomation.ViCore.Cmdlets.Commands.DotNetInterop.GetVIViewGet-view: could not validate the argument on the parameter "VIObject". The argument is null or empty. Provide an argument that is not null or empty, and then try
the command again.
E:\script\VM-DS-cluster.ps1:9 tank: 24
+ += get-view $report < < < < $vm. Store data-name of the property, summary |
+ CategoryInfo: InvalidData: (:)) [Get-view], ParameterBindingValidationException)
+ FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutomation.ViCore.Cmdlets.Commands.DotNetInterop.GetVIViewIt seems that your copy/paste lost some
. I have attached the script
-
I have a hp pavilion g7, Windows 7
Starting tonight, my laptop fails to start and freezes on the "getting started" page view. After several of the recommended options, I ran the test that does not start.
The display screen reads-
Memory test: past
Smart check: past
Dst short: failure
Failure ID: GU6E00 - 63479 L-MFPX01-60TP03
Product ID: A7A44UANBA
Hard drive 1
Starting test: failed
Where should I go here for this problem?Hello
Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced. It is also compatible with startup problems you describe.
If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.
If you live in the United States, contact HP here.
If you are in another part of the world, begin here.
If you are out of warranty and you want a guide on replacing the hard drive you, please let me know...
Kind regards
DP - K
-
Failed to start the event viewer. Access is denied
"Failed to start Event Viewer. Access is denied"message with a red x appears when I click on details of view in the event log in the task: advanced tools
I am the administrater and the only user, the user account is disabled. I checked the register and complete the keys in Services/Eventlog 6 other tasks open OK, only the event log does not open.
I have never used this service before, running Vista Business SP2 on a laptop HP Compaq8710p (7 years), all the drivers are up to date, I've checked for viruses and malicious software (Symantec Endpoint and Windows Defender). My HARD drive is only 45% used (55% free), 4 GB of memory.
Would appreciate some help here
Thank you
Please run a check of system files (SFC)All instructions are in our Wiki article below...
If you have any questions please ask us for . -
Failed to start the bb4.5 Ubuntu 11.02 64 bit client
I can't get my client to run. BBOUT said "nohup: cannot run command ' BBHOME/bin/bbrun': no such file or directory".
I checked that BBHOME is correct.
I checked the path of nohup is correct.
BBHOME/bin/bbrun exists and is bbuser:bbuser 755
Anyone have any ideas?
do you have defined external scripts in bb-bbexttab? If so, comment out for now and try to start the BB.
If it works, add an external at the same time until you get the error
or I just noticed something...
BBOUT said "nohup: cannot run command ' BBHOME/bin/bbrun': no such file or directory".
Why the BBHOME/bin/bbrun is the command that fails as in the code?
WHT is the value of BBHOME top runbb.sh? It must be a directory, not '& BBHOME '. If it's '& BBHOME', you probably doesn't bbconfig/install to install the client.
-
OEM12c - failed to start the Oracle Management Server.
I can't start the Oracle Management Server.
The file referenced on has not been updated since October 6th, I joined this EMGC_OMS1 file.
The 12.1 database is on a separate server. The database and listener are on the rise.
No matter what I put the results are the same.
(Q) what are the correct environment variables to set?
(Q) Comment can I start up the Oracle Enterprise Manager 12 c?
I tried this command $OMS_HOME/bin/emctl start SGD
With the House of WHO defined as:
$ echo $OMS_HOME
/ u01/app/oracle/product/entmgr/mwhome_1/WHO
$ $OMS_HOME/bin/emctl start SGD
Oracle Enterprise Manager Cloud control 12 c Release 4
Copyright (c) 1996, 2014 Oracle Corporation. All rights reserved.
From Oracle Management Server...
Departure WebTier...
WebTier started successfully
Management Server Oracle could not be started
Check the log file MS Server for more information: /u01/app/oracle/product/entmgr/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/logs/EMGC_OMS1.out
Management Server Oracle is down
And
I tried to run the. ./setWLSEnv.sh
CD/u01/app/oracle/product/entmgr/mwhome_1/who/bin
Then run:
$. / emctl start SGD
Oracle Enterprise Manager Cloud control 12 c Release 4
Copyright (c) 1996, 2014 Oracle Corporation. All rights reserved.
From Oracle Management Server...
Departure WebTier...
WebTier started successfully
Management Server Oracle could not be started
Check the log file MS Server for more information: /u01/app/oracle/product/entmgr/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/logs/EMGC_OMS1.out
Management Server Oracle is down
OEM 12 c SGD server.
$ uname - a
SunOS 5.10 zone6-03 Generic_150400-03 sun4v sparc sun4v
Database server:
$ uname - a
SunOS 5.10 zone5-03 Generic_150400-03 sun4v sparc sun4v
$ export AGENT_HOME=/u01/app/oracle/agents/core/12.1.0.4.0
$ export ORACLE_HOME=/u01/app/oracle/product/12.1.0/dbhome_1
$ export PATH = $ORACLE_HOME/perl/bin: $ORACLE_HOME/bin: / usr/bin: / usr/sbin: $ORACLE_HOME/appsutil/jre/bin: / bin: / usr/bin / X 11: / usr/local/bin: / usr/kerberos/bin: / usr/local/bin: / bin: / usr/bin: / home/oracle/bin:.
$ export ORACLE_SID = emg1
$ sqlplus / as sysdba
SQL > select * from v$ instance;
1 emg1 zone5-03 12.1.0.1.0 6 October 14 OPEN NO 1 ORDER
NO NORMAL PRIMARY_INSTANCE ASSETS ALLOWED NO REGULAR EE 0
The listener is in place: version is for Solaris LSNRCTL: Version 12.1.0.1.0
The Agent is running.
Newspapers/u01/app/oracle/product/entmgr/mwhome_1/logs as wlst_20141008110202.log
Last login: Tuesday, October 7, 14:58:25 2014 of 10.122.60.160
Oracle Corporation SunOS 5.10 generic Patch January 2005
$ export OMS_HOME = / u01/app/oracle/product/entmgr/mwhome_1/who
$ $OMS_HOME/bin/emctl start SGD
Oracle Enterprise Manager Cloud control 12 c Release 4
Copyright (c) 1996, 2014 Oracle Corporation. All rights reserved.
From Oracle Management Server...
Departure WebTier...
WebTier started successfully
Management Server Oracle could not be started
Check the log file MS Server for more information: /u01/app/oracle/product/entmgr/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/logs/EMGC_OMS1.out
Management Server Oracle is down
$ ls - ltr /u01/app/oracle/product/entmgr/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/logs/EMGC_OMS1.out
-rw - r - 1 oracle oinstall 19060 6 Oct 21:45 /u01/app/oracle/product/entmgr/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/logs/EMGC_OMS1.out
Note the EMGC_OMS1.out newspaper do not updated.
Thank you
Paul
Hi Paul,.
(1) Env variables for who.
$ORACLE_HOME/bin/emctl is a shell script which handles to define the variables of approx.
ORACLE_HOME = / oracle/product/middleware/who; Export ORACLE_HOMEWe use below
unset TWO_TASK
ORACLE_HOME = / oracle/product/middleware/who; Export ORACLE_HOME
PATH = $HOME/bin: / usr/bin: / usr/sbin: / bin: / usr/ccs/bin: $ORACLE_HOME/bin. export PATH
ORACLE_INSTANCE = / oracle/product/gc_inst/WebTierIH1; export ORACLE_INSTANCE
ORA_TZFILE=$ORACLE_HOME/oracore/zoneinfo/timezlrg.dat; Export ORA_TZFILE2.) steps to start SGD
ORACLE_HOME = / oracle/product/middleware/who; Export ORACLE_HOME
Starting at $ORACLE_HOME/bin/emctl SGDor
CD $ORACLE_HOME/bin
. / emctl start SGD
or
ORACLE_HOME = / oracle/product/middleware/who; Export ORACLE_HOME
$PATH = path: $ORACLE_HOME/bin. export PATHemctl start SGD
Kind regards
RAM.
-
Hello
Oracle version: 10.2.0.1
Operating system: linux
I was unable to start the dbconsole, and get the following error when starting.
Please help me[oracle@VTL2209AD ~]$ emctl start dbconsole TZ set to US/Eastern OC4J Configuration issue. /u01/app/oracle/product/10.1.0/db_1/oc4j/j2ee/OC4J_DBConsole_VTL2209AD.virinchi.com_ACAMAIN not found.
Thank you and best regards,
Poorna Prasadrun these commands:
export ORACLE_SID =
EMCA - deconfig dbcontrol db-rest drop
EMCA - config dbcontrol db-rest create
Maybe you are looking for
-
I put the security update, and now my browser does not work. I have a white screen which is partly black and I can not close even to uninstall and reinstall. What should I do?
-
Blue screen STOP error 0 x 00000124 on Toshiba Qosmio X 300 - 13w
Hey guys and girls. I need urgent help with my new Toshiba Qosmio X 300 - 13W (British model) that I bought in DecemberI chose to install the 64-bit Vista Home Premium on the computer and the slopes of big thing until I HAV a work of high intensity f
-
Error 1445 what control do reference
I try to use the vi located here in my own written in 2013 vi from LabVIEW. I receive the error 1445 as reported here. Do I really need to use a fixed string for that to work? Is there a different method. Some of my controls are clusters and I forese
-
cannot get on internet explore after installed updates
After that windows installs the updates, I can't on internet explore. you uninstall them and will get perhaps online. were not able to reinstall antivirus. There is a new problem, since late March. I need the antivirus updates, can someone help me. T
-
No internet connection available!
Hi all. I can't connect to internet on my computer laptop everything in my brother's laptop and my smartphone can. There is a red X on the wifi logo, and he said that no connection is available. I tried to solve by pressing Fn + F3 key to activate th