Failing application updates/can ' t issue install Applications may 15

Similar Questions

• Why do update can not be installed every time I start FF version 9.01

  When I start PC and then open FireFox version 9.01 I get following message: "update could not be installed. Please make sure no other copy of FireFox are running and restart"
  No other versions are running. It works fine on my wife's cell phone and automatically updated. This happens whenever I have use your browser or try to go to another site. I saw the newspaper and it says exactly what I just said. I guess that's the latest version already, but I can't stop the error message. All of the suggestions. I would like to reinstall but wonder if I would lose everything already settled?

  Tim:
  Thanks for the help... I checked all and finally d/l for the installer again and the it manually re-installed/updated to date... checked the task mgr and it is also in the process now and version working fine now is 10.0.
  If it's resolved for now

• Failed security updates will not be installed.

  I can't get the following updates to install:

  Update security for Windows XP (KB2661637)
  Update Rollup for the stop bits ActiveX for Windows XP (KB2647518)
  Update security for Windows XP (KB2621440)
  Update security for Windows XP (KB2641653)

  I continually a message having failed through the installer Auto-setting day & have also attempted to download each update separately and install them, and they will also not install it manually. Can anyone offer a solution? I would be grateful for an idea about it! Thanks in advance!

  Hi iSkelly,

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• Folio producer fails to update published back issues

  A client wants to update me an advertisement in several past issues, including the issues published in January and February 2012.

  I updated the article in folio and go to the producer Folio to update the issue, but that immediately get a failed attempt or it will process up to 20% before failing. I tried several times to publication and that it constantly fails.

  Has anyone encountered this problem?

  Why can't update?

  What do you see when you click on the link "down." There should be an error message.

  --

  James Roche

  [email protected]<>[email protected]>

  I was born lucky

• 10.10.5 OSX update can not be installed

  I finally had time to update to 10.10.5 and I get the message "Update OS X cannot be installed to this disk. This volume does not meet the conditions required for this update"- what this means? I thought that meant it he don't are not enough space on the hard drive, but I currently have 366GB to 498 GB free.

  I have a 2011 end pro macbook. I don't want to get el capitan right now or the other.

  You must use the update from the drop-down list. The ordinary can only update 10.10.4.

  (143222)

• 10.11.5 update can not be installed

  iMac late 2013

  After you download the update from the App store, nothing else is happening.

  The update operation does not start.  It's that I didn't do anything.

  What's wrong?

  Update: my iMac running OS 10.11.4 El Capitan

• This application has failed to start because uncdms.dll was not found. Reinstalling the application may fix this problem. How can I fix it? Kathy

  This application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix this problem.  How can I fix it?  Kathy

  The above explains the problem, my problem is I don't know what it's etymology comes.  Is this windows software, or software from Microsoft or both?  What is the name of the Application?  Help, please!  Thank you, Kathy

  Hi Kathy,

  1 have you made changes to your computer recently?

  2. When you get this error message?

  The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall and reinstall Windows Desktop Search

  The uncdms.dll file is installed on your PC when you download the Windows Desktop Search application. Problems with this application's files can cause a missing uncdms.dll of error appears on your system.

  To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

  Step 1: Remove Windows Desktop Search from the boot sequence

  To do this, follow the steps below:

  a. click on the start menu, click Run.

  (b) in the Open box, type msconfig and press ENTER.

  c. in the System Configuration Utility dialog box, click the Startup tab.

  d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

  e. restart your computer.

  Step 2: Uninstall Windows Desktop Search applications

  To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

  a. click the start menu and select Control Panel utility.

  b. double-click the icon Add / Remove programs.

  c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

  d. press the button Delete.

  e. restart your computer.

  Method 2: I suggest do you an online scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• How can I add/install a new application Adobe Creative cloud on my computer? My Department uses VIP device licenses for education.

  How can I add/install a new application Adobe Creative cloud on my computer? My Department uses VIP device licenses for education.

  I have a set of applications Adobe CC that comes from a package installer. A new plan should be created just to install the additional application?

  What update of applications (for example, the transition to the latest version of Adobe first Pro 2014)?

  I'm sorry.

  Applications must be made through Packager only.

  You can create packages for them, if you wish.

• the application has failed to start because iertutil.dll is found noty. Re-installing the application may fix the problem.

  I am unable to download money or newdev.ll comes out.

  I also get this massage: the application failed to start because iertutil.dll is found noty. Re-installing the application may fix the problem.

  I have Office XP SERVICE3 PCs.

  Looks like its part of the internet explorer 6 or 7. If you are using IE6, (its out of date), download IE7 or install it IE8

• How can I fix this error: failed application svchost.exe_gpsvc

  Vista 64 bit on my machine boots every time I get the following error in my application event log

  Failed application svchost.exe_gpsvc, version 6.0.6001.18000, time stamp 0 x 47919291, failed module ntdll.dll, version 6.0.6002.18005, time stamp 0x49e0421d, exception code 0xc0000374, offset 0x00000000000aef37, process id 0 x 290 error, start the application time 0x01cafb535722e08a.

  The machine is in a domain and I believe that it is a matter of group policy. Also, I think that this is the error that triggers the error Host Service Windows that opens when I start the machine.

  
  

  Developer_46038 salvation,

  As the computer is on the field, it would be better suited to the TechNet Windows forum community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  Concerning

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forumand let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can not install Illustrator, they ask me to change the direction of the application, but he always says that it can not be installed in the root directory. What can I do?

  I can not install Illustrator, they ask me to change the direction of the application, but he always says that it can not be installed in the root directory. What can I do?

  Hi alexisp25256377,

  Please mention the exact error message that you found when installing Illustrator and here are the steps that you can follow to change the installation location.

  1. go to preferences using the gear on creative cloud icon

  2. go in creative menu Cloud

  3. do Apps and then change the installation location to another directory.

• Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

  Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

  Hello

  I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

  Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

  See how it works for you:

  If you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:

  Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

  You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

  If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

  You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

  Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

  You also will be able to properly run a browser on the system afflicted to go on Internet download one.

  There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

  You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

  If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

  Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

  TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

  Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• My Nero8 crushed & stoped working: the failing Application path

  My Nero8 crushed & stoped working: the failing Application path: program files Files\Nero\Lib\NMIndexStoreSvr.exe how can I Nero8 back to work without having to buy a new there upgrade version (Nero AG) they offer for me as a single fix?

  Hello

  1. you made any hardware or software changes the computer recently?

  2 is the issue limited to Nero 8?

  3. what operating system is installed?

  Try the following steps.

  Method 1.

  Step 1.

  Uninstall Nero 8 using the tool to uninstall Nero 8: http://www.nero.com/enu/support-nero8-tools-utilities.html

  Step 2.

  You can download Nero here: http://www.nero.com/enu/downloads.html

  Clean boot the computer and then try to install Nero 8. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2.

  If the steps above do not help, then contact support for Nero here: http://www.nero.com/enu/support-contact.html

  I hope this helps.

• Failing application H5_Game.exe

  Hello.
  It comes to play Heroes V. When I play it after some time 1-2 hours it blocking down.

  Log name: Application
  Source: Application error
  Date: 20.10.2009 10:51:44
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Owner-PC
  Description:
  Application H5_Game.exe, version 3.0.1.146, time stamp 0x47446ae8, failed module igdumd32.dll, version 7.15.10.1502, time stamp 0x4851d0b4, exception code 0xc0000005, offset error 0x00003f25, 0x15c0, failing application start 0x01ca515707712ab8 process id.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1000
      2
      100
      0 x 80000000000000
     
      5334
      Application
      Owner-PC
     
   
   
      H5_Game.exe
      3.0.1.146
      47446ae8
      igdumd32.dll
      7.15.10.1502
      4851d0b4
      c0000005
      00003f25
      15 c 0
      01ca515707712ab8
   
  

  My computer:
  Toshiba Satellite A305-S6095
  3 GB Ram
  Intel Core 2 Duo T6400
  Mobile Intel GMA4500 MHD

  Hi Argo624,

  Welcome to Microsoft Vista Forum community!

  Please answer the following questions to help you better on this issue.

  (a) what is the version on Vista installed on your computer?

  (b) you get any error message?

  You can visit the manufacturer's Web site and check if the game is compatible with Vista.

  If it is not compatible, then you can try to run the game in windows xp sp2 to Windows Vista compatibility mode

  To manually set the properties of a program compatibility:

  1 right click on the program icon on your desktop or the shortcut in the start menu for the program to run, and then click Properties.

  2. click on the Compatibility tab and change the settings for compatibility for your program

  You can get more information by following the link:

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/appcompat.mspx

  Hope this information is useful.
  Let me know if it worked.

  Concerning
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Application has failed to start because msa32dl was not found, reinstalling the application may fix the problem

  How can I fix it?
  application has failed to start because msa32dl was not found, reinstaling the application may fix the problem

  First make sure that your system is clean in:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  http://www.eset.com/us/online-scanner/ eset online scanner

  Then answer the following questions:

  brand and model of the pc

  current antivirus

  Operating system and service pack

  What application fails to start?