Failure of DB of ping for WCS on Tomcat installation

Similar Questions

• My windows 7 has been slain in case of failure of blue windows reconfiguration for hours.

  My windows 7 has been slain in case of failure of blue windows reconfiguration for hours. How should I do?

  Hello

  Thank you for the update.

  I would ask you to try the suggestions in the following article the basic error that you receive.

  Note: Please ignore the section Upgrade Perform an on-site (resettlement) (Windows 7 and Windows Vista)

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  I hope this helps.

• you place your order for WCS with MSE

  When ordering WCS with MSE, is that all that you need for WCS?

  WCS-STANDARD-K9 ($0) + WCS-MORE-500 ($44. 5 K)

  In the past, we ordered WCS-APLOC-500. WCS-PLUS-500 replace it?

  When you are not using MSE is WCS-APBASE-500?

  Yes, you just need standard + more to integrate with MSE. Plus also gives you high availability which is a nice feature. Most replaced Loc.

  Link below will give you all the information you need.

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd804b4646.html

  And the Base MSE/WIPS/HA.

  See you soon

  Carpet

• Addition of controller for WCS

  I currently have a 4400 controller and I'm looking to implement of the WCS.  Add the command to the WCS will change the settings of the controller? I don't want to take down my production network.

  Hi Mike,.

  Simply by adding the WLC for WCS will change all settings on the WLC himself.

  Settings on the WLC can be changed later through WCS with specific operations/configuration models.

  Kind regards

  Fede

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• PRVF-4007: failure of verification of equivalence for the user "grid."

  All,

  I have install the equivalence of SSH user between 2 node RAC (ushdc8498, ushdc8499) and able to ssh without password to other nodes.

  The servers in the AIX operating system.

  But still my runcluvfy.sh fails with the following message: -.

  [grid ushdc8498] / u01/app/Oracle_Software/grid stage pre - crsinst - n ushdc8498, ushdc8499 #./runcluvfy.sh

  Conducting due diligence to install cluster services

  Audit accessibility of node...

  Verification of accessibility node from node 'ushdc8498 '.

  Verify the equivalence of the user...

  PRVF-4007: failure of verification of equivalence for the user "grid."

  The test failed on the nodes:

  ushdc8498

  CAUTION:

  Equivalence of the user is not defined for nodes:

  ushdc8498

  Audit will proceed to nodes:

  ushdc8499

  Version of exectask could not be retrieved from the node 'ushdc8499 '.

  ERROR:

  Framework for installation verification failed on all nodes

  Verification can take place

  Check prior to the installation of cluster service failed on all nodes.

  Thank you

  Mahi

  Thank you all, I'm able to resolve the problem.

  It seems that the problem is with the software. I downloaded the new software fresh and re-directed runcluvfy.sh. This time, he threw the error/usr/bin/scp was not there, but it's there.

  So, I deleted the file/usr/bin/scp of the two nodes and recreated link/opt/pware64/bin/scp/usr/bin/scp and rerun runcluvfy.sh.

  Now he went well without any warnings.

  Thank you for your support.

  Thank you

  Mahi

• Important updates for Vista SP2 Security Installation failure: update MSXML 4.0 SP2 (KB927978) AND (KB954430) security, citing error Code 652, Windows Update encountered an unknown error!

  Has no significant updates for VISTA SP2 security installation: MSXML 4.0 SP2 (KB927978) security AND (KB954430), citing error Code 652, Windows Update encountered an unknown error! How is it Windows Update does not recognize it's own mistakes? I tried several times to install both of these important updates without success. Please help me so that I can install these two updates & get back on the right track. Thank you!

  See the section "How to get help", for example, http://support.microsoft.com/kb/927978

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I opened the game client for life despite the installation of the game has stopped working properly and the game closes that I said?

  I opened the game client for life despite the installation of the game stopped correctly and the game closes that I said?

  Hello

  What operating system do you use?

  I suggest you to follow the links and check out them.

  Method 1:

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• is it possible to implement TLS for ADR on Tomcat?

  We are migrating the earpiece of the APEX to ADR.

  The installation guide for ADR does not have too much information about SSL/TLS. It is obviously a task to be completed by the components surrounding ADR.

  We intend to deploy on Tomcat and Tomcat received instructions on how to enable TLS for her.

  From an architectural point of view, is it OK for TLS for ADR on Tomcat, or should we better before an Apache or NGINX?

  I'd rather have Tomcat do it, keeps it simple, but I was uncertain, because I read the following in the Tomcat SSL/TLS howto:

  "When running Tomcat mainly as a Servlet/JSP container behind another web server, such as Apache or Microsoft IIS, it is usually necessary to set the main web server to manage users SSL connections".

  Thanks for sharing your experience and / or his opinions.

  Thomas

  Hi snmdla,

  snmdla wrote:

  I have two questions:

  • I was afraid that need us Oracle Advanced Security license to be able to configure TLS on SQL * Net, but this seems to be is no longer necessary 11 g on.
  • My question was on whether it's OK to implement TLS on the layer of the ADR (i.e. on the Tomcat site) and do without a reverse proxy: would you say it is also a good choice?

  The first question is in the article mentioned in the question only. For more clearance on licensing queries, you can contact My Oracle Support (MOS).

  For the second question: Reverse Proxy is more desirable and especially adopted option in web architecture. In addition to provide a layer of abstraction on top of your Web server, it offers more benefits and options to secure your web applications with the option of implementation directly to SSL/TLS on your Web server and expose your web server on the Internet. Having said this, like to say that it would be your decision whether to implement reverse proxy or not.

  Kind regards

  Kiran

• I did an update for LR6.  After installation, I can't open LR6.  A message indicates the user permissions issues.

  I did an update for LR6.  After installation, I can't open LR6.  A message indicates the user permissions issues.

  See answer #7 in this thread: Re: update on CC (for PS, LR and bridge) online and met a permissions problem with LR on three dossiers?

• ? I can't install elements13 first for mac. The installation process stops at "Installation of Forbereder" (Swedish version) of "installation Préparation" in English.

  I have can´t install elements13 first for mac. The installation process stops at "Installation of Forbereder" (Swedish version) of "installation Préparation" in English. ???

  MAc Pro OSX Yosemite Booc retina.

  Kindly try to troubleshooting installation | Photoshop Elements, Elements first. Mac OS

• When I try and download the free trial of CC for the sequels, the installer said 'double click to install', but the red box that I'm supposed to click does not show silent... what I do?

  When I try and download the free trial of CC for the sequels, the installer said 'double click to install', but the red box that I'm supposed to click does not show silent... what I do?

  Hello

  Please try to download the installer from the link below:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  Kind regards

  Sheena

• No adapters network for ESX 5.5 Installation (RealTek)

  Hi, in reference to;

  No adapters network for ESX 5.5 Installation

  I think I should do this procedure by using one of the following drivers;

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false #2

  I want the a 'LINUX driver for kernel 3.x and 2.6.x and 2.4.x?  Who will work on linux that depends on the ESXi?

  This solved my problem;

  TinkerTry IT @ home | Install ESXi 5.5 with Realtek 8111/8168 NIC

• Just bought photoshop cs6 for windows and the installation received disc.

  Just bought photoshop cs6 for windows and the installation received disc.  Where do you find the serial number on the disc?  This should start the serial number?  The disc was in the original box and I see a number starting with 910...

  The box was in a brown envelope, and it has sticker bar code on the back with more digits.  Where should I look for the actual serial number.

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html

• failure of the system, looking for answers

  Need help for the guys. Had a major failure of the system last week, and I'm a bit confused as to what happened and why I was unable to get free. I lost a bit of my confidence in Vsphere, and I'd like to renew that.

  A bit on the environment, esxi 5.0 U1, with servers HP Gen 8 3 node cluster running. HP P4500 SAN iscsi for vmfs data storage. ESXi is installed on HP's CF cards in servers. This cluster has been upward and running for about 6 months, not a single hiccup before that.

  Wednesday we have migrated 2 of our vm (SQL and progress) to this cluster 5.0 database, the virtual machine went on different hosts in the cluster. The virtual machine was running on a cluster 2 older nodes with esxi 4.1 U2. Machines migrated fine, fine tools updates, reboot, everything seemed fine.

  About 2 hours after that the migration, we started to receive calls that our Progress database is down, users could not connect. Then we started getting more calls, other machines were inaccessible. Glancing from vcenter I could see all the virtual machines in question were on the same host, and I was unable to open the console in vsphere for VMs on that host. The host showed he was connected, showed all the vm connected, but I could not open the console or the desktop remotely to one of the VMs on that host. I started studying, and of course this host fell all the SAN Iscsi network connections. The railways have shown dead. Ports of nic card viewed active, the switch ports showed activity, but the connections were down. I could always ping the address of management for the host however, and ports for vmotion were in place.

  At this point, I started to try and vmotion VMs on that host data base progress, he would not migrate, just sat at 8% prepare to migrate. I tried other virtual machines with the same result. I started to wonder why HA had not kicked, and why I couldn't move anything. At this stage the host started disconnecting from the cluster. I could always ping on the host, but vsphere showed as disconnected. I couldn't move my VM, and I couldn't go to the host via vcenter, via the vsphere client pointed directly to the host, or by using the DCUI.

  So I called VMware support, got an engineer on the line with me, and it became clear we were going to have to power cycle that host and crash all virtual machine running on it. It wasn't a very pleasant for me answer because this database of progress is our main production system, and I was afraid of corruption. We had no choice, so we did. When the host came back upward, fortunately the virtual machine came very well. VMware engineer digging in the newspapers and said that this was with a particular NIC card driver with known issues. He showed me the KB on this issue, and it seemed to be a known issue. We have updated these drivers on all hosts, and that's all.

  My problem with this is that, how is the cluster ran fine for 6 months without problem, and how come the redundant path to the SAN did not keep the connection active when with the path with the bad nic card driver failed? I have 2 different, with 2 NICs different paths for the Iscsi SAN. The other card had no known driver issue. Why both paths failed not just in cause of a driver on one of the cards problem? More worrying is also how is it that I could not immigrate anything, and why no HA kick in?

  Sorry for the novel here, but without all the details is not part of a story. My biggest concern, that's why I couldn't move anything? In the event of a host failure, what you're supposed to do in order to migrate the machines if they don't migrate via vsphere client? We were down for about 2.5 hours, and a lot of questions were thrown on me the senior management as to why my "system available, redundant high" took hours to retrieve...

  Guys here any ideas, thoughts on how I would have handled it differently, reasons why I should be confident everything is fine now?

  Thanks for your time

  Kevin

  trink408 wrote:

  Thanks Matt.

  I guess some of the problem is not completely understand how the HA or Vmotion. I was under the impression once that the virtual machine was not reachable HA wouldn't kick and move the virtual machine? The virtual machine was not to ping requests or accessible by the Office remotely. I couldn't get their power off or do anything through vcenter either.

  If they had no link usable storage, this seems possible.  HA simply does not address the failures of storage.  Not at all.  It IS possible to activate at the level of the VM HA, but it isn't on by default - must be activated on a per-VM basis.  You should read the book by Duncan Epping on this - it's the bible of the AH.

  So in case something happens with the connection of storage, you have really no way to vmotion anything right here, and your only option is to kill the host / VM running on it, and then migrate or leave HA move them?

  Fix.

  I didn't know that I wouldn't be able to vmotion virtual machine if the host has lost its connection to storage. The other hosts in the cluster saw storage.

  The source host is controlling these VMDK, as far as the other guests are concerned (they see a lock on the file) and when they ask the host if its still alive, he answers (because it has not powered the network lost or down, which are the failure mode THAT HA is designed to handle). So they take charge.

  The reason why it took so long was because I didn't kill the host with my concerns for the database. I was hoping that the VMware engineer may have a way to gracefully close things down. So he spent some time looking around and trying to determine what was going on. Ultimately we just power cycle the host, so I could have done much earlier, and if we are facing this again in the future, I would.

  As long as you follow the seller advised for more decent databases (keeping the transaction logs, etc.), don't have good backups, theres no real risk of data corruption.  VMware does not significantly change the i/o path, in order to have the same exposure than on a physical host.

  I still do not understand why the two paths were marked as dead and the host completely lost connection to the SAN, as well as to show finally disconnected in vcenter.

  Well the host went offline because it got stuck in an all-paths-down scenario, which is common for 5.0.  5.1 solves this problem a little.  I don't know why all roads fell, but I suspect that you have a misconfig somewhere... normally you expect at least 4 paths in a system set up correctly on the left.  Check with HP to ensure that you follow best practices.

  Maybe all the IP stack has been corrupted or something?

  Possible, of course, but unlikely.  Never heard before.

  I appreciate the help and the preview, I thought that the problem was a lack of understanding on my part and fully accept it.

  HA and vMotion are complex.  At least now you can go back to mgmt and tell them why he fell more (because it was a failure outside the scope of the software scenario) and may ask for money to build a proper SQL cluster.  Definitely recommend the book of Duncan Epping: http://www.amazon.com/VMware-vSphere-Clustering-Technical-Deepdive/dp/1463658133/ref=la_B002YJMRCY_1_2?ie=UTF8&qid=1363622697&sr=1-2

• Failure to install security update for Windows XP (KB2686509) error code 8007005 0 x.

  I recently enabled Microsoft Update for my XP Media Edition 2004 after his being unavailable for a year due to corruption Trojan. The solution that worked there was rename the CATROOT2 folder and the SofwareDistribution folder in the Windows directory in the Windows > System32 directory and reboot. This solution came from the Microsoft site. After that, I was able to download and install 50 of 51 updates. A fails repeatedly: update for Windows XP (KB2686509) security. I get error code 0 x 8007005. I tried several fixes, including one designated for error 0 x 8007003 (rename file) download at download.old as well as the use of aggressive mode on Microsoft Fixit. Always fails to update. All other updates installed correctly, including a new this morning, but of course update continues offering that failed. Any ideas on how to get this installed? This is a relatively new, so I'm not sure that the problem is that it is already there, but the first failure was around 40 of the 51 when I check the history update file. Thanks for your suggestions.

  Hello

  I suggest you consult the site mentioned below:

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update

  http://support.microsoft.com/kb/968003/en-us.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.