Addition of controller for WCS

I currently have a 4400 controller and I'm looking to implement of the WCS.  Add the command to the WCS will change the settings of the controller? I don't want to take down my production network.

Hi Mike,.

Simply by adding the WLC for WCS will change all settings on the WLC himself.

Settings on the WLC can be changed later through WCS with specific operations/configuration models.

Kind regards

Fede

--

If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

Tags: Cisco Wireless

Similar Questions

  • Additional SCSI controller

    Y at - it performance of adding an additional SCSI controller? I have a virtual machine with 2 virtual disks and RDM 3. I think about adding a second SCSI controller for the RDM.

    Mike

    The answer is: it depends

    If you switch to the adapter PVSCSI vSphere and you can have up to 12% rate to 18% less CPU usage. More information here. There are also a few drawbacks here.

    It is also good the KB Article.

    If you have vSphere, the only difference between one and two controllers SCSI will have the possibility to separate the 'SCSI Bus sharing settings' between the disks.

    --

    Pozdrawiam/Best looks

    Andrzej

  • dirver USB controller for HP 15-d024se for windows 7 64 bit

    I couldn't find the dirver for usb controller for HP 15-d024se for windows 7 64 bit, please help

    Hello

    Please try Driver Intel Management Engine Interface (MEI)

    http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64344.exe

    and Intel Chipset Driver and Utility Installation:

    http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64343.exe

    Reboot and try Intel USB 3.0 host controller driver

    http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64706.exe

    Kind regards.

  • Need an audio controller for my Portege R205-S209

    I can't update the drivers of the multimedia audio controller for my Portege R205-S209... I already visited all Toshiba sites, including the Japan, China which I can t read because of characters, but still I can't find the driver.

    I lost my recovery disc, then I reformatted my laptop with no recovery disc can u help to get involved me?

    Google to identify your laptop as a portable American model. All drivers should be available on the Toshiba U.S. support under http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download page

    Check it out!

  • Driver satellite A210 - 16G Mass Storage Controller for Windows Vista 32-bit

    Hello, I need driver Toshiba Satellite A210 - 16G Mass Storage Controller for Windows Vista 32-bit. If you have the installation file, please redirect me if you have any other file, please explain to me where to install it.

    If I were you I would take a look at the site to download the drivers from the main Toshiba page, because you will find everything you need.
    The mass storage controller can be the HARD drive controller or the controller of the SD card. I want to download both of them.

    Here´s a direct page link drivers: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    Welcome them

  • Compaq Mini CQ10-525DX: lack of controller ethernet drivers, network controller, pci device and video controller for windows 7

    I need the driver for ethernet controller and network controller driver, driver pci device video controller for Windows 7 Home Premium 64 bit driver

    Someone please help

    PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04
    PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C
    PCI\VEN_10EC & DEV_8136 & CC_020000
    PCI\VEN_10EC & DEV_8136 & CC_0200

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01
    PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C
    PCI\VEN_14E4 & DEV_4727 & CC_028000
    PCI\VEN_14E4 & DEV_4727 & CC_0280

    PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C & REV_01
    PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C
    PCI\VEN_10EC & DEV_5288 & CC_FF0000
    PCI\VEN_10EC & DEV_5288 & CC_FF00

    PCI\VEN_8086 & DEV_A012 & SUBSYS_148A103C & REV_00
    PCI\VEN_8086 & DEV_A012 & SUBSYS_148A103C
    PCI\VEN_8086 & DEV_A012 & CC_038000
    PCI\VEN_8086 & DEV_A012 & CC_0380

    Hello:

    See if these drivers work...

    PCI\VEN_10EC & DEV_8136:

    This package contains the driver for the Realtek NIC installation files in the notebook models and operating systems.

    File name: sp49600.exe

    PCI\VEN_14E4 & DEV_4727:

    FTP://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57965.exe

    PCI\VEN_10EC & DEV_5288:

    This package contains the installation files for driver for the Realtek card reader for laptops models and operating systems.

    File name: sp49599.exe

    PCI\VEN_8086 & DEV_A012:

    https://Downloadcenter.Intel.com/download/19493/Intel-Graphics-Media-Accelerator-3150-driver-for-Windows-7-64-bit

  • Need a driver for usb controller for hp pavillion slimline 400 - 020l win 7 pro 64-bit

    Hi guys,.

    I need a driver of usb controller for hp pavillion slimline 400 - 020l win 7 pro 64-bit

    any help will be much appreciated

    Thank you

    Enter the Device Manager and right-click on the device without driver. Select Properties. Use the following image for example, to find the PCI\VEN string. Post it here.

  • Driver missing for PCI Simple Communications Controller for U41

    I have a problem with a driver for PCI Simple Communications Controller for U41. Please help for the best solution thanks

    Good day and welcome to the community.

    This is usually resolved by installing the Intel Management Engine Interface package.

    Please take a look at the pages of resources of your machine, under the section of Chipset :

    http://support.Lenovo.com/us/en/products/laptops-and-netbooks/u-series/U41-70

    I don't know if there are also the Serial i/o package.

    I hope this helps a little.

    Kind regards.

  • without using DAQ how a PID controller for temperature control

    Mr President.

    IAM trying to make a PID controller for temperature control in labview. But I have no devices data acquisition. Then without using DAQ how a PID controller.please suggest some useful block diagram.plz give me an answer. I tried one, but not working.below attached is my work.

    as a learning exercise, some devices can be simulated in the Explorer to measure (performance measure explore, right click on devices, select Create new.) Select simulated device and choose your device, you can search by product code for example 4070 for a dmm)

    I hope this helps you begin to learn labview, depending on how advanced you can I strongly suggest looking in training of core 2 and core 1 but also by looking at the examples that come with labview

  • Black wired xbox 360 controller for windows flashes and freezes games

    I installed the xbox 360 accessories 1.2, I plugged my black Xbox 360 wired controller for windows on the computer. I let it install its drivers. The ring of light continues to blink all the time, no matter how many times I have uninstalled and reinstalled the program and drivers, it continues to Flash, I even looked for updates for the drivers. When I start a game it also works very well unless I have pull triggers or go at my card or try to pick a lock. (the game is skyrim) It freezes whenever I have try them and I unplug the controller and it thaws and if I plug it back in, it does the same thing again. I tested the controller on a real xbox 360 (works fine), but it doesn't seem to work on my pc. Any help please, but serious answers only.

    Hello

    You will get help on the Forums XBox so - much to use them there.

    Microsoft Hardware - games
    http://www.Microsoft.com/hardware/en-us/gaming

    XBox 360 wired controller - Support - see 'Need help?' on the right side of the page
    http://www.Microsoft.com/hardware/en-us/p/Xbox-360-controller-for-Windows/52A-00004#support

    Rob - SpiritX

  • Microsoft xbox 360 controller for windows problem with NFS

    Hi, I brought yesterday Microsoft xbox 360 controller for windows. I installed and the end driver. The problem is that when I play NFS Most Wanted & NFS Carbon, cars automatically starts left thin when I accelerate? Why is - this problem to occur, and what is the solution?

    I also changed the default controllers controls and set left lean & thin right to left analog stick left/right as PRIMARY & I updated lean left & lean right D - pad left/right as SECONDARY controls.

    Hi Zxcvbnma,

    ·         Is the specific issue with only Need for Speed or does happen with other games as well?

    If the problem is specific only with Need for Speed, you can try to uninstall the game and reinstall the game and check if it works fine without any problems.

    I also suggest that you uninstall Xbox 360 controller drivers and reinstall the drivers that could help you solve the problem.

    Check the settings of the game. You can also connect the controller to the other computer and use it and check if the problem still persists.

    Thank you, and in what concerns:
    Swathi B - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Xbox 360 controller for windows question

    Im looking forward to buying the windows xbox 360 wireless controller. I would like to know what microsoft and other games is compatible with the pad at the moment. IM in the current world of warcraft and halo so far. I want to know if its worth buying.

    my pc is
    Quad Core AMD phenom x 4
    6 GB of ram
    640 GB hd
    Windows vista 64-bit

    Hello AxeMankd,

    I have the 360 controller and it works with all the games that are supported controls for controllers.  Most recent games have even profiles of controller for the 360 controller.  The only game that I wasn't able to use it with was the Call of Duty 4, but who were able to evolve with an update on the side of the games.  There has been some problems with some games and wireless controller but not the wired version.  It was a driver problem which is probably not a factor now.  I have not tested version wireless with my PC because I have not bought the wireless PC part, but I don't have two types of controller.

    Happy fragging I have a simple philosophy: just assume everyone is a piece of _ and then be pleasantly surprised if you find someone who is not.

  • Impossible to find a multimedia audio controller for my dell dimension 1100

    looking for the download of multimedia controller for my computer

    Hello

    I suggest you according to the question in this forum and check if that helps:

    http://en.community.Dell.com/support-forums/software-OS/default.aspx

    It will be useful.

  • The headset audio USB deforms after initially connect xbox 360 controller for windows

    Hello world.

    It seems that many people (including me, now) start meeting audio distortion after they plug a Xbox 360 controller for windows on their computer for the first time. I have a headset Audio USB of Dynex Mono, and whenever I try to use the microphone, the sound comes out distorted. Also, when I try to use the earphone to listen to whatever it is that the audio is also flawed.

    Did anyone here know what I can do, so I can get the controller and the helmet the two working together in a computer? The headset works fine in another computer.

    I have Windows XP Home SP3.

    writing in the new message: * e-mail address is removed from the privacy... *

    Hello world.

    It seems that many people (including me, now) start meeting audio distortion after they plug a Xbox 360 controller for windows on their computer for the first time. I have a headset Audio USB of Dynex Mono, and whenever I try to use the microphone, the sound comes out distorted. Also, when I try to use the earphone to listen to whatever it is that the audio is also flawed.

    Did anyone here know what I can do, so I can get the controller and the helmet the two working together in a computer? The headset works fine in another computer.

    I have Windows XP Home SP3.

    The Xbox controller draw right on the edge for a USB port, putting pressure on all of the USB bus, especially if there are other USB devices. If you get an external USB powered hub to add to your system and plug the controller, you will solve your problem.

    I had the same problem with my Creative Labs USB sound card and the Xbox controller at the same time. I picked up a Zonet similar to this (different brand):

    http://www.Newegg.com/product/product.aspx?item=N82E16817182168

    I plug my controller, keyboard, and mouse dongle in the hub and plug my sound card directly into one of the ports on the back of the PC. Problem solved! I got no sound since problem.

    SC Tom
    -There is no such thing as TMI if you request technical support.

  • can I download a multimedia audio controller for windows XP

    IS IT POSSIBLE TO DOWNLOAD A MULTIMEDIA AUDIO CONTROLLER FOR WINDOWS XP SERVICE PACK 2.

    THE SOUND ON MY PC HAS GONE ALTOGETHER.

    IF SO, HOW WOULD I GO ABOUT THIS. (BIT OF A NOVICE WITH THE COMPUTER).

    Hi gordonknott,

    Yes you can. You have two choices... you can tell us the brand and model of your computer so that we can help you get the correct driver or you can visit the website of the manufacturer of your computer to find and download the latest drivers from device to your system.

    I noticed that you don't have to update your system with the latest service pack. I would say that while you're there, you must download and install Windows XP SP3 for better security for your system from the link provided below.

    Windows XP SP3.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

    Ignore the warning about network facilities and professionals of computer and when its been install, visit windows update to get the latest updates and security patches.

    Good luck and let us know if this helped.

Maybe you are looking for