Failure of the installation of Oracle 11 g r2

Similar Questions

• update problem failure in the installation of updates to restore changes

  I use windows 8 unique language. Whenever I have install the update and try to restart my pc, when you set up the window, there is message 'Failure in the installation of updates to restore changes.'

  Help, please.

  Thank you.

  Hi Manish,

  This problem may occur if Windows updates are not getting not properly installed or damaged.

  I suggest you try the steps from the following link:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after troubleshooting.

  
  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Transaction is written to the log file and it is not written to undo tablespace. During a failure of the system how oracle rolls back the transaction.

  Hi all

  My question is:

  Transaction is written to the log file and it is not written to undo tablespace.

  During a failure of the system how oracle rolls back the transaction.

  I have already provided the answer, you ignored if well (you seem to only read the responses by people of your country).

  Redo log is always written * first * before * writing to the data block (redo log writing is much more aggressive). So it DOESN 'T MATTER if you lose these scriptures of rollback segment.

  Valuation: rear roller followed by roll forward, using redo log files and/or archive redo log files.

  Sybrand Bakker

  Senior Oracle DBA

• I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  63f5a1a9-ECA2-4300-B10f-22cd940a8726 wrote:

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  It is a symptom of textbooks classic does not have read and followed the original instructions to prepare the downloaded files.  You should have two files zip files.  They both must be decompressed in the same directory.  If you unzip using Windows graphic interface - in right click on the name of the file and selecting "extract all...". "the default behavior will be to create a directory, the same name as the zip file and extract in it.  Thus, file_1_of_2 pulls in directory_1_of_2 and file_2_of_2 extracted in directory_2_of_2.  You must override this stupid behavior by default and specify the directory yourself.  And specify the SAME directory for both files.

  Or just go to a command prompt, change directories to the directory where the two zip files are located and deliver "unzip " and "unzip ", and they will both be properly unpack to a directory named "database".

• Deny access to drive C on the installation of oracle database

  Hello

  Can someone help me, I have installed the Oracle 11 g database on my computer and now I can't access my C drive, and also the Installation was not complete. What should I do to release this drive?

  I moved this thread on the forum of XE. Yet once installed Oracle do not mess with the operating system. PL identify the exact version of the OS - versions supported are documented in the Installation Guide - Oracle & reg; Database Express Edition

  It is best to follow the instructions in the Installation Guide, assuming you have a supported operating system version.

  HTH
  Srini

• Regarding the Installation of Oracle 11.2.0.2

  I want to install oracle in my server linux86-64 11.2.0.2 charges.
  Do I have to install all the 7 patches for this task?
  
  It will be very useful
  Thank you.

  Manish Subedi says:
  Hello
  As you said that centOS is not tenable, but instead when I installed 11.2.0.1, it allows the installation of oracle without any error.
  But when install us the patches of oracle11.2.0.2 on the same system, he throws the error: require 64-bit OS.
  I think the installation is possible on centOS (64-bit).
  I also recall that our server is linux86-64.

  "not supported" does not mean that the installation will always be error power off. It does not mean that the product does absolutely not. It simply means there will be no support if you are having problems. It may or may not work, but if it does not, you're on your own.

  If you have objections please let me inform.
  Thank you for your support and hope for a response more than you all.

  Thank you

• Regarding the Installation of Oracle BI Applications

  Hi all
  
  I was going through the documentation for the Oracle BI Applications, probably the old version.
  
  I. DAC has previously been installed as one of the components as well as the installation of Oracle's Applications of BI?
  
  Now, I have installed the Oracle BI Applications version 7.9.6.1. and the DAC is not installed with it. It is available in a package separate from the OTN site.
  
  Old Documentation says: "DAC installation is part of the * Oracle BI Analytics installation *", referring to what is said: what I've learned, it's there:
  1. "infrastructure oracle installation.
  2. "installation of oracle BI Applications.
  3 "Installing Informatica Powercenter.
  4 "Installation of DAC" in packaging separate.
  
  II. what does mean by * "installing Oracle BI Analytics?" It is part of all above mentioned installation or a separate installation.
  
  Kind regards
  Anthony.

  I. DAC has previously been installed as one of the components as well as the installation of Oracle's Applications of BI?

  This is a separate installation

  Now, I have installed the Oracle BI Applications version 7.9.6.1. and the DAC is not installed with it. It is available in a package separate from the OTN site.

  Correct, you must install it separately

  II. what does mean by * "installing Oracle BI Analytics?" It is part of all above mentioned installation or a separate installation.

  Documentation of the olive TREE is not very good, there a lot of ambiguities like the one you quote.

  http://rnm1978.WordPress.com/2009/07/30/what-is-Obia/

  Basically, you need to install:
  Informatica Server & Client
  DAC & Client Server
  OBIEE
  Metadata Informatica (repository)
  Metadata (repository) DAC
  Metadata OBIEE (repository RPD and WebCat)
  Schema of the Data Warehouse

• certification of operating systems for the installation of oracle 10G database

  Can you get it someone please let me know which are the operating systems certified for the installation of oracle 10G (10.1 and 10.2) database
  Refers to the operating system officially supported by oracle.
  
  Published by: arnaud on December 17, 2009 07:08

  Arnaud says:
  Can you get it someone please let me know which are the operating systems certified for the installation of oracle 10G (10.1 and 10.2) database
  Refers to the operating system officially supported by oracle.

  The Installation Guide provides the official list. Go to http://tahiti.oracle.com, select your version and find the Setup instructions for your OS family.

  http://www.Oracle.com/pls/db102/homepage, you will have to the docs of 10gr 2. ON this page, to the right, you will see a region speak installation docs. Chapter 2 (http://download.oracle.com/docs/cd/B19306_01/install.102/b15660/pre_install.htm#sthref85) tells you the requirements before you begin. It tells you the operating system.

  Operating system      One of the following operating system versions:
  
      *      Red Hat Enterprise Linux AS/ES 3.0 (Update 4 or later)
      *      Red Hat Linux 4.0
      *      SUSE Linux Enterprise Server 9.0 with SP 2 or later
      *      Asianux 1.0
      *      Asianux 2.0
  

• Assistance required after you download Sierra - locked in a spiral of failure of the Installation

  Hello - I am a student of the University who made the mistake of thinking I had to upgrade my OS system after seeing some updates new flashy in the Sierra. Long story short, that my computer is locked into a cycle where I restarts and the installation process will begin installation but end abruptly and ask me to reboot again.

  I have exams and papers due and seriously want access to my data again. I don't have a back up of my files. As such, I am looking for a method that will allow me access to my files that I need to be able to read notes, print etc.

  Details: I have an old MBPro by the end of 2011. He was on as the primary OS x Lion. I had updated some time later. More recently, I got El Capitan and it worked very well. I downloaded Sierra in the background as I did work at home and after installing it, it asked me to reboot. This was the point that I was able to come back from. Reboot after installation scenario is as follows:

  -A progress bar comes up saying 34 minutes until completion

  -The progress bar goes to 33 minutes until completion

  -Beginning of fans of my computer acting upward and the bar stops and crashes of progression

  -The installation process says he doesn't have and asks me to restart my computer

  Specifically, I get the message 'Mac OS could not be installed on your computer. File system check or repair a failure. Quit the installer to restart your computer and try again. »

  When I quit the installer of the OS, I am taken to the startup disk option and asked to choose a system to reboot my computer with. I see 'Macintosh HD macOS 10.11.4' but when I click on it and try to restart I get the following error message, "you cannot change the disk on the disk selected. Startup disk could not gather enough information on the selected disk. »

  Things I've tried:

  Internet recovery mode: I went here to do a restore of the Mac OS x comes with my computer (Lion). This attempt fails and the computer tells me I can't downgrade because a more recent OSX is already on my computer...

  Recovery mode: I tried to come back just El Capitan from here. When I try to do the process will take literally one second before I get a notification saying: "an error occurred during the preparation of the installation. Try to rerun this application".

  Disk utility: I tried to do first aid and repair on this menu on the big disk image (since some of them pop up... I'm sure that the big one is my computer and the small setup of Sierra is?). I see that I 115Gigs franco 319Gigs departure. When I click on check and repair, the process takes some time and seems as he goes to halfway through before I get errors in the two. Repair error wonder backup my data.

  -some specific stuff; the journal for the repair of first aid says something like: the Macintosh HD volume could not be completely checked. File system check exit code is 8. Update support partition for the volume as required. File system check or repair a failure. Operation failed... »

  Safe mode: I can't start in safe mode. My computer will load the apple logo, progress on 3/4ths of the way start-up and then crash on its own and not restart.

  Things I have tried:

  Constituting a new boot USB of OS Sierra - I read that in so doing I can substitute the installation process that is going on right now on my computer and start a new... I hope one that works. I was not able to do this again, because I need someone to another macbook to make it and none of my friends won't let me touch their computers after the fiasco that happened on mine... Can I get some feedback on this?

  Backup: I don't have an external hard drive... I'm willing to buy one if necessary, but I don't know how to make a backup in a world where I don't have access to the major functional sections of my computer. Also, if my computer is * session here now, I'm worried that a backup will be essentially a * a backup... is this the work of the computer?

  Other thoughts:

  -my computer was working fine before I tried the upgrade... no complaints on my end, it was a real trooper

  -Maybe the download was corrupted?

  -I learned today that the operating system installation process requires internet connection - maybe that my internet connection is bad?

  -on that note, I want to say I tried a lot of different things. Been in different parts of the campus (different parts of my dorm building, IT support across campus, etc.). My University has also 3 options of WIFI, but each requires a separate verification process. Throughout this process, I have been connected to one of these methods. Switching may help? But, if I can't do the verification step (i.e. open a browser and type in the details of my student specific to actually use the web), I do not think that this will help you a lot. In addition, I am sure that I am already using one of the less frequently used options.

  I want to avoid a permanent possible deletion because there are important things on my computer.

  Any advice? Enjoy it!

  Same problem here on my Mac Mini end of 2012. I couldn't find any fix so far. The machine worked perfectly fine before with El Capitan and had about 50 GB of available disk space. I have use any version beta of Sierra, but officially released one that came yesterday. Really disappointing to see the new system operating software with fundamental questions and no good way to solve it.

  Any help really appreciated.

• "Database corrupt installation" - discovered after failures repeat the installation of automatic updates of Windows

  We're running out of WinXP SP3.  Apparently, we are unable to install/uninstall anything correctly.  I think it may have something to do with "a basic installation damaged."  I got this error when trying to manually install KB972581 (a security update for 2007 Microsoft Office System).  This could have been caused by running the Windows Installer cleanup utility, I didn't have problems with Office 2007.  We were informed at all by continuing to upgrade with another program issues.

  We daily use Outlook 2007.  Multiple users, so we can't delete it.

  Same thing with KB970895 (update of security for SQL Server 2005 Service Pack 2) - another failure with the description of the error "Unable to install Windows Installer MSP file".

  Basically, the automatic updates of Windows always fail.  Comprehensive research of these forums, I found and ran the Microsoft FixIt! # 50202, without result.

  How can I fix anything that makes things installation fails?

  I had a similar problem - resolved two things actually. First make sure yu have the latest windows installer engine. Then download the package fails and run interactive mode. This will give you the 'real' error which causes the failure so that you can correct it.

  In my case it was a dependency on another file system that was resolved by running sfc/scannow - it's maybe not the question you... once again, run the full installation package and also to enablehttp://support.microsoft.com/kb/223300 logging to track down issues...

• Failure of the Installation of M1536MFP on 99%

  Stuck on 99% for a few minutes and I get: "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. »

  What I've done so far:

  Re-download the standard and complete version of the pilot, as an administrator, connecting a different username (Administrator of the domain).

  The computer is a brand new Windows 7 Pro 64 bit with latest updates, connection to 2008 R2 domain controller running.

  In the event log, the only mistake I see is the WMI ID 10 event (something on / /. / root/CIMV2, SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor').

  The below suggestion helped me to solve my problem with the installation failure of 99% on a XP PRO machine. Thank you!

  I deleted the DRIVER of PRINTER UNIVERSAL - restarted the PC - and has been able to successfully run the installation package from HP for basic printing and scanning functions.

  "Are you having driver UPD (HP universal printer driver) installed on your system? your problem seems to be the driver of the UPD collide with M1536 driver, if it is possible, please uninstall the UPD until your new installation try with driver software M1536 clearly. »

• Failure of the Installation SRE910 WAAS

  Dear Cisco support community,

  We have a SRE910 on Cisco2911 to be installed with WAAS. I downloaded the new package "waas-sre-Installer - 5.0.3 a. 7 - k9" and extract it to the FTP server.

  When I run the installation command, it start with the installation process. From the FTP server, I see that SRE download .install, .header and file .sre.

  However, the process just stop without any notification for more than an hour.

  It's the latest state of the installation of the WAAS:

  status of service-module sm1/0

  Service module is Cisco SM1/0

  Service module takes in charge the session via line ATS 67

  Service module tries to recover from the error

  Reset of the service of the heart rate Module is enabled

  Status of the service Module is not available

  Information resources:

  CPU frequency: 1865 MHz

  Memory size: 2530 MB

  0 disc size: 500107 MB

  Disc 1: 500107 MB size

  2: 2055 MB disk size

  Install the ftp: / / *: [email protected] / * *//waas-sre-installer-5.0.3a.7-k9/waas-accelerator-5.0.3a.7-k9.bin current

  Install status: waas-Accelerator - 5.0.3 a. 7 - k9.bin.install.sre asked to drop

  No local partitions

  We tried with another image WAAS: waas-sre-Installer - 4.2.3.7 - k9, however may not be installed correctly. It returns the error message:

  Loading waas-sre-installer-4.2.3.7-k9/waas-accelerator-4.2.3.7-k9.bin.install.sre!

  [OK - 1722/4096 bytes]

  Welcome to the installation of WAAS now check resources

  Check the full resource complete the installation

  The execution of the script waas-Accelerator - 4.2.3.7 - k9.bin.install.sre, abandoned installation failed

  When I cancel installation and do a session of SRE, it always reboot constantly. I wonder if I had a hardware failure.

  Help, please.

  BR,

  Imad

  Hi Imad,

  IOS is good, what software has been installed on the SRE when he came?

  Was it UCS?

  If so, can first set you the SRE IDE mode using the material utility as described in the following link:

  http://www.Cisco.com/en/us/docs/interfaces_modules/services_modules/sre_v/1.1/user/guide/software.html#wp1079944

  Then try to reinstall the software WAAS?

  Kind regards

  Nicolas

• Failure of the installation of the Windows SDK on Windows 7 x 64. "the installation failed with the return code 5100.

  I try and install the SK and it fails for Web and ISO Setup > DVD drive. Same error every time:

  12:22:50 Wednesday, July 11, 2012: C:\Program Files\Microsoft SDKs\Windows\v7.1\Setup\SFX\vcredist_x64.exe install failed with return code 5100

  The following lines are less useful because they suggest to go to a place that I did not.

  12:23:21 Wednesday, July 11, 2012: [SDKSetup:Error] Config_Products_Install: product Installation Microsoft Windows SDK for Windows 7 (failure): Please refer to Samples\Setup\HTML\ConfigDetails.htm document for more information. Fireplace: In SDKSetup.Product.ConfigureRelatedSfx () at SDKSetup.Product.ConfigureNewProduct (ManualResetEvent CancelEvent)
  12:23:21 Wednesday, July 11, 2012: [SDKSetup] Config_Products_InstallNew: complete the installation of the new product: Microsoft Windows SDK for Windows 7
  12:23:21 Wednesday, July 11, 2012: [SDKSetup:Error] Config_Products_Install: software Windows (failed) SDK installation: Installation of the product 'Microsoft Windows SDK for Windows 7' reported the following error: Please refer to Samples\Setup\HTML\ConfigDetails.htm document for more information. Fireplace: SDKSetup.Product.ConfigureNewProduct (ManualResetEvent CancelEvent) at SDKSetup.Product.SetupProduct (TaskMode taskMode, ManualResetEvent CancelEvent) at SDKSetup.ProductCollection.SetupProducts (TaskMode taskMode, believing believing, ManualResetEvent cancelEvent) to the SDKSetup.ConfigProducts.DoCurrentTask (Group TaskMode)

  Any ideas what could be worng? The rest of the log file is too big for this message but I can send it to someone who can help.

  Hello

  I suggest you try the steps listed from the link below,

  Windows SDK fails to install with the return Code 5100

  http://support.Microsoft.com/kb/2717426/de

• Power failure during the installation of Windows 7

  We had a power failure most when setting up my Windows 7 upgrade installation and it will not complete the installation. I downloaded the iso image and an installation DVD, but it does not start the machine. I checked the DVD works on another box of Windows 7, so I'm stuck. I ran the front compatibility checker I tried to upgrade and we found some good things. Any advice in addition to the upgrade of the mother/processor board?

  Remove the hard drive from the computer, connect it to another format only the Windows partition, reinstall it to the original host and try to re-run the installer of Windows...

• Get the error during the installation of Oracle Fusion Middleware 11 g

  Dear all,

  I'm installing Oracle Fusion Middleware 11 g forms and reports in my windows 7 64 bit. Suite error below has been provisioned to the installation location.

  

  Please help me how to solve this problem.

  Kind regards

  Atif Zafar

  As Salamu Asalam are Atef,

  During the installation of weblogic server (WLS), home of Middleware is created.  My dough to this mistake, it's that you does not have the correct version of weblogic FIRST before installing the forms and reports. Then, u MUST specify THE SAME directory Middleware where wls is created after a successful installation.

  For more details, pls, review the steps http://docs.oracle.com/cd/E38115_01/doc.111210/e23960/install.htm#FRINS252

  Amatu Allah.