Aspire U5 - 710: application of Firmware & Driver updates!

Similar Questions

• Memory mapped for paged Raytracer. Your project may exceed the limits of the cards. Try close to other applications. Try to update the CUDA driver. (5070::2).

  Hi, I use AE on an Asus laptop with NVIDIA GeForce 740 M. Recently I did an animation with ray tracing and I was working fine but at one time, I saw this message: paged memory mapped for Raytracer. Your project may exceed the limits of the cards. Try close to other applications. Try to update the CUDA driver. (5070::2).

  Anyone know why this message appears if I worked well?

  Thank you

  The message appeared when I was making the project.

  This means what it says - you are out of memory, even if only temporarily. Most likely the tesselation was too or things like samples of your memory exhaustion motion blur. If it worked regardless of the message, that I would not make too much of it...

  Mylenium

• Acer Aspire T3-710 upgraded gpu

  Hi all

  I recently bought the computer desktop Acer Aspire T3 - 710 (form below), however, I need to update the graphics card and it seems that there is enough space to fit this card Nvidia GTX 750 ti. The current map graphic is a Nvidia gtx 745 (OEM) (Plug here). This current card is a single location that I want is double slot (there are 4 unique locations on the back plate) it seems pretty great, but I'm not sure.

  Anyone has any advice on the upgrade of this card? Or better yet the GPU, which fit the T3-710? My current diet is only 220w so I know I need to upgrade it too, but I don't want to until I have a graphics card I know will fit.

  My current desktop features;

  10 64-bit Windows Home

  Intel Core i7 @ 3.40 GHz Skylake 14nm 6700

  16 GB of Dual-Channel DDR3 RAM

  Card mother Acer Aspire T3-710 (U3E1)

  4 GB NVIDIA GeForce GTX 745

  3 TB drive HARD 5400 RPM

  220w PSU

  Thanks for any help.

  Hi neewu

  I also recently bought this pc and immediately updated to a unit of evga 600w power supply to install a decent gpu. As it is the best gpu you could go with this prebuilt is a 750ti. The issue is not only with the PSU, but the length of the card itself. There is only 1 PCI slot on the motherboard and there are connections of power directly behind the video card apparently preventing one more card of 6.5 inches or more should be installed. From what I understand, it would be useful to upgrade the power supply that I have and go for a GTX 960 mini or mini 970. If someone has updated the gpu on this pc that I would also be interested to know what suits. I ordered a mini 970 and will display the results when it arrives

• Satellite Pro L300 - 152 Driver Update problems.

  Hi, I'm new to all this and just about managed to find my way to this Web site. I bought a Satellite as above new brand of PC World Business yesterday 22/10/08.
  I had horrible problems to install several updates of Windows that I finally had to install one by one with a re-boot after each update 'Important '.

  I took the laptop with Toshiba and now I'm using Tempro I 5 alerts telling me to install updates various...

  _3 updates the firmware and update of face recognition 1. _ I extracted the zip file and run the progs and get a message saying "this firmware is not compatible with the selected drive. Contact the manufacturer of your system for more information on formware updates available for this drive "."

  1 updating bios which finally ran with Windows Help and then gave the message «ROM date is not older than the date of the BIOS...» "whatever that means.

  I just bought a laptop, I didn't volunteer to become a technical wizz.
  It feels like I'm doing a work of Toshiba troubleshooting here, and I don't know what I'm doing. Can someone help me?
  Thanks, Guy

  Hey Buddy

  To be honest I don t understand why you react so panicly

  You have a laptop that has a pre-installed Vista OS.
  The fact is that this OS Vista was preinstalled on your laptop computer and for several days/weeks, Microsoft has published a large number of updates and so Vista downloaded and installed updates. But don t wonder about other updates. From time to time you will receive these patches! This is a common behavior of the OS.

  With regard to the Tempro tool;
  This tool informs you about new drivers available, tools or utilities on the Toshiba page.
  To be honest I wouldn t use it. Usually, it's really not important what and when a pilot a tool was released if your laptop runs without problem. I'm always this recommendation; never change a running system.

  Hope I could make a clarification.

  Good bye

• HD4600 graphics driver update problems

  Hello - I had problems with my new pc from HP ENVY 700-515xt CTO. Somehow, the file system has become corrupted I made a recovery through the recovery Partition procedure. Who went well as far as I know.

  All updates have been applied, and a new HD4600 Graphics Driver has been installe-10.18.14.4029-18/11/2014. Now, the driver stops and restarts frequently. The site of HP Software and Driver said the most recent driver is 10.18.10.3995 Rev.A-

  June 9, 2015, but la.4029 settles. There is no way to roll back the driver Rev.A.3995.

  Please advise on this problem and help me. If you need more information, newspapers, etc., please let me know.

  Thank you!

  Tim

  Great spirits have always encountered violent opposition from mediocre minds

  On the Forum:

  After a bit of study and research, we were able to resolve this issue on our own. HP Diagnostics indicated a

  Low memory. After the execution of memory diagnostic Windows and MemTest86 +, which indicated the wasy memory very well.

  We explored elsewhere. Pilots in relevant areas have been all updated and all is well now. We can

  certainly say that there was a problem on the site HP Driver and software - someday that he downloaded the pilote.4029,.

  which is the direct Intel driver not OEM, and 2 days later, the site offers the version.3995. That, along with a

  Chipset driver update solved the problem.

  Be advised-don't take any advice also determining all things you here on the internet in one of these forums. Yes, listen to

  what people have to offer, but check their reviews with at least 2 other sources and use your good sense. Too much of

  application expertise out there and they will get you into trouble.

  Thank you for any input on my original request.

  Kind eyes-

  Tim

• Pavilion dv7-4270us: dv7-4270us bluetooth does not work after driver update

  I recently updated my drivers from the HP website.  Now, I know it was a mistake that bluetooth has not been installed correctly.    And there is no option "driver restore.  I tried several times sp50180, according to the HP website and also tried the old version listed (sp49153).   They old version did not install correctly and a new seemed especially, but none of my Bluetooth devices that used to work to do now.   I can 'connect to' some devices but they cannot transfer photos, connect to the audio, etc.  Some devices that are used to work can still be seen when I say "add a bluetooth device".  After installation, in the Device Manager, I find the following:

  The radio Bluetooth: Bluetooth Broadcom 2070 and Microsoft Bluetooth Enumerator (both working properly)

  Human Interface Device: Bluetooth Remote Control (works)

  Modem: Modem Standard via a Bluetooth #2 link (works)

  Network cards (all working correctly):

  Device Bluetooth (personal area network)

  (Heading RFCOMM Protocol TDI) Bluetooth device

  (and my other network devices, all functioning properly also)

  Other devices: this is the problem area.  After installation and reboot, I always find myself with 10 entries "Bluetooth Peripheral Device", all with a yellow exclaimation mark and all say real estate "Other devices", "unknown" (GSM) and the location is "on Microsft Bluetooth enumerator". "."

  I tried right click and uninstall it, but when I reboot they come back to the top, search windows update, but can not find a driver and go straight to the "other devices".  I also tried to uninstall the "Broadcom 2070 Bluetooth 3.0" 'Programs and features' and right-click to delete each listed above bluetooth driver and then run the sp50180 again and it will install without error and find the same above drivers that work and leave the same 10 does not.  And my Bluetooth headphones (two different ones) is more work (or can be seen) and my Bluetooth phone can be 'connected' but any attempt to transfer fails.

  I've exhausted all ideas on the web, I could find, and none have helped.  I tried to load a restore point, but after having so many pilot facilities, there is no point of restoration with the appropriate driver.  A full backup of the system on another drive, but much changed the applications and data files so I cannot restore it.  Unless someone knows how to use a full backup of the Windows 7 system to restore only the Bluetooth driver.

  Another idea is that the driver update that messed up things maybe changed some other file or a registry setting that is not corrected by sp50180, but that seems unlikely.

  Is it possible to manually install each of the 10 'other devices' drivers?  If I right click on a defective device and select "update driver software" no matter if I select the drive C:\ or F:\ (my driver and software download drive) or automatic search (including online) - it does not find the driver files.  I also tried to select properties and 'put to day driver' but the same results.

  Any help would be greatly appreciated.

  I found a solution. I received a call of support in Mumbai.  HP gave me a free call because they were not able to set a guarantee repair questions, so gave me the free support call.  I took an hour, but ended up the solution was very simple.

  There were these problems:

  1) 10 'other devices' in device with the exclamation points Manager can be uninstalled, but still were automatically reinstalled with the same exclamation point.  No pilot was available to the public for them.

  (2) my phone under Bluetooth devices could connect but would not photos transfer.

  (3) neither my helmet Bluetooth would not work.

  The solution was simply to go to 'Show Bluetooth devices' and right-click on each and select 'Delete device' (even if dimmed they might still be revoked).  After all have been abducted there were no "other devices" in Device Manager.  I then added each Bluetooth device again.  This was very well all work.  I also noticed my phone was five drivers "Bluetooth Device" was so 5 of the 10 exclamation points himself.

  For some reason, deletion of the driver in the Device Manager has not deleted the list "Bluetooth Device".  And by uninstalling and reinstalling the drivers, it does not work.

  If the answer is simple.  Before removing the drivers Bluetooth first remove all Bluetooth devices.

• CCC and AMD graphics card failed after the driver update

  I have a HP Pavilion dv6 laptop 6 c-32eg.

  I recently tried to update my GPU driver, as was necessary to run a particular program (oclHashcat, if you're interested). I downloaded the installer from hereand he ran. It looks good, but after the required reboot, the screen resolution has been set at 800 x 600, instead of the usual 1366 x 768. Then, I got an error message saying something in the sense of "your AMD driver could not be installed because you do not have the required equipment. In Device Manager the GPU was something like "usinig windows has stopped this device because it has reported an error."

  If I try to open the CCC, the program runs for several minutes, with a relatively high CPU usage in the Task Manager, then the message "' Catalyst Control Center: the host Application has stopped working". "

  I have now tried different ways to solve this problem, which none have worked. Try to download a driver on the AMD website did not work, because the site said that the pilot was not appropriate for a computer with switchable graphics.

  My laptop doesn't seem to be using the AMD GPU as you try to run games as a test done drip slowly and with a minimum resolution.

  My laptop has doubled (switchable CCC) graphics:

  -AMD Radeon HD 7690 M XT card, with a 8.882.2.3000 driver version and date 30/09/2011.

  -And Intel HD Graphics Family, with, apparently, the same driver version and date as shown above. I can't know exactly what kind of GPU Intel it is.

  I also tried to update the graphic driver Intel, to see if that would fix the problem at all, but it made it worse: the screen become very red and low resolution. I fixed that by returning to a point just before performed system restore. Unfortunately, I don't think to do this before initially updated drivers.

  So, my question is: how to I find the full use of two graphics cards?

  Here is a copy - paste of my information system:

  Spoiler (Highlight to read)

  The performance Information and tools
  More details on my computer
  Component Details subscore Base score processor Intel (r) Core i5 - 2450 M CPU @ 2.50 GHz 7.0 5.9 determined by subscore more low memory (RAM) 8.00 GB 7.5 graphics Intel(r) HD Graphics Family 6.6 5861 MB Total graphics games Graph available memory 6.6 main 298 GB HDD free (462 GB Total) 5.9 Windows 7 Home Premium
  
  System manufacturer Hewlett-Packard model HP Pavilion dv6 Notebook PC Total amount of memory 8.00 GB RAM type system 64-bit operating system number of processor cores 2 total storage of 1397 GB disk partition size or your hard drives (C 298 GB free (462 GB Total) disk partition (D 325 GB free (932 GB Total) disk partition (E free 1 GB (4 GB Total) Media Player (F CD/DVD adapter type chart display)))) chart Intel(r) HD Graphics Family total available graphics card dedicated 6373 MB memory 2560 MB memory dedicated system memory 0 MB Shared system memory 3813 MB Display adapter driver version 8.882.2.3000 monitor main resolution 1366 x 768 DirectX version DirectX 10
  Information on the performance and tools more details on my computerComponent details subscore Base score processor Intel Core i5 - 2450 M CPU @ 2.50 GHz 7.0 5.9 determined by subscore more low (RAM) 8.00 GB 7.5 graphics Intel(r) HD Graphics Family 6.6 graphics games 5861 MB Total graphics memory available memory 6.6 main 298 GB HDD free (462 GB Total) 5.9 Windows 7 Home PremiumSystem manufacturer Hewlett-Packard model HP Pavilion dv6 Notebook PC type system memory 8.00 total GB system RAM, 64-bit operating system number of processors cores 2 total storage of 1397 GB disk partition size or your hard drives (C 298 GB free (462 GB Total) disk partition (D 325 GB free (932 GB Total) disk partition (E free 1 GB (4 GB Total) Media Player (F CD/DVD graphics Intel(r) HD Graphics Family Total graphic card available 6373 MB memory dedicated graphic 2560 MB system memory)))) dedicated memory 0 MB shared system memory 3813 MB version 8.882.2.3000 type graphics card driver monitor main resolution 1366 x 768 DirectX version DirectX 10

  Hello

  There may be a 3rd option left that you can try for one more set to gpu driver updates, but I would first get your system to a State where the switchable graphics work correctly.

  Try restoring the system first.

  If this does not work, the driver package AMD (containing two gpu drivers) you need can be downloaded from HP on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55092.exe

  In this case being able to find a game more set to driver updates, many people with your type of switchable graphics succeeded with the offers on the 3rd party site - I strongly recommend to read the Manual to get an understanding of how it works and why driver signature enforcement must be disabled in order to load these drivers.

  http://leshcatlabs.NET/

  Kind regards

  DP - K

• Aspire xc - 710 and msata

  Hi all

  Is the Aspire xc-710 compatible with any type of msata hard drives?

  I am struggling with storage space, two sata ports are occupied by two 3.5 "HARD drive but I want to put ESXi on the box, but I can't do this without additional storage space.

  I thought maybe I could replace the wifi with a device msata module?

  Thank you

  your model has 2 ports m2 and one can be used to for a 2280 m2 SSD.

  It borders on the motherboard ATX power connector.

• Acer Aspire One model ZA3 (WIN XP) needs updated drivers

  I'm still enjoying my Acer Aspire One manufactured in 2009 running Windows XP Edition family, but am running into the faults caused by ancient drivers.

  A single analysis indicates that I need a driver updated GlobeTrotter MO40X but where and which?

  Acer computers can update their own drivers somehow?

  Thanks to anyone who can help me

  Where can I get information on the model ZA3?

  It's actually an Aspire One AO751h.  The drivers are available on the page drivers.

  I don't know what you are "scanning", but the "GlobeTrotter" MO40X is not a driver for an Acer system package.

  All the available drivers are on our page drivers.

• Acer Aspire T3 - 710

  Hi all

  I was wondering how to activate the turbo boost function of the CPU (max speed of 3.4 Ghz, with Turbo Boost 4.0 Ghz) with its acer aspire model;

  10 64-bit Windows Home

  Intel Core i7 @ 3.40 GHz Skylake 6700

  16 GB of Dual-Channel DDR3 RAM

  Card mother Acer Aspire T3-710 (U3E1)

  4 GB NVIDIA GeForce GTX 745

  3 TB drive HARD 5400 RPM

  220w PSU

  Or is it automatic?

  Thanks for your help.

  It's automatic

• Looking for a NVIDIA nForce Serial ATA Controller Driver Update for Presario CQ5107C

  Hello

  The last two weeks, my computer, which is a Compaq Presario CQ5107C been freezing while I'm on it, and while I'm even not use without programs open. The pilot also missed a couple of times during use, but a message pops up saying something close to "driver recover successfully. Also, when I stopped it, it takes forever to stop and sometimes when I try to shut down properly, it goes to the blue screen and said that one of the drivers failed, which I guess it's my NVIDIA nForce Serial ATA Controller driver. My GetForce put up to date the most recent driver updated and there is no problem I know with whom. I read a litte autour my ATA driver can slow down and start doing this gel then go to blue screen if it malfunctions. I'm running on a 32 bit Windows Vista processor and have not yet update my Windows 7. I was looking for every possible way get an update for my ATA controller driver anywhere without having to pay for it. I guess I should upgrade to Windows 7 to possibly get an update. Update to Windows 7 would remove all the programs/personal off my computer files and if I had to stop the gel? Any help would be great because I searched everywhere and found the best solution yet. Thank you.

  Here are the specifications of your Compaq Presario CQ5107C desktop computer. According to the specifications, it uses a GeForce 6150SE / nForce 430 chipset. The chipset driver is below.

  Windows Vista/Win7 32-bit driver v15.49

  Supoorts; 430 / GeForce 6150SE, 430 / GeForce 6150LE, 430 / GeForce 6150, 430 / Geforce 6100, 420 / Geforce 6100, 410 / GeForce 6150LE, 410 / GeForce 6100, 405 / Geforce 6100, 400 / Geforce 6100

  Driver Ethernet (v73.14 +) WHQL

  (V73.16) network management tools "Sedona".

  SATAIDE (v11.1.0.33) WHQL driver

  SATARAID Driver (v11.1.0.33) WHQL

  Application RAIDTOOL (v11.1.0.30)

  SMBUS (v4.74) WHQL driver

  SMU (v1.71) WHQL driver

  GPU (v190.38) WHQL driver

  PhysX (v9.09.0428)

  Away Mode Driver (v6.0.6000.114) WHQL

  Installer (v7.57)

• Do I need a driver update

  I don't remember how I got this program to upgrade the pilot saying horrible things about my computer.  It seems that it is associated with Microsoft, but I'm not sure.

  How will I know that I need a driver update?

  When I click on the program, I have the window 'do you want to allow the following program to make changes to this computer?' Slimwater utilities.

  I'm not sure I want to.

  Slimware who?

  Why would I trust them?

  Thank you for your help.

  It is not the case.

  Microsoft does not make such a thing.

  These applications are not only useless, but many contain malware runners.

  Find out what hardware you have, refer to manufacturer web sites, get the drivers for the models of the devices that you have the source ONLY.

• Driver update is required for windows?

  Applications of driver update third said that out-of-date drivers can harm your computer or even could slow. Is this right? I scan my drivers with Driver Genius. Once the scanning is finished, it displays a list of out-of-date drivers to update immediately. But I start a new search with the Windows Device Manager, it says "Windows has determined the driver software for your device is up to date. Driver update is therefore, a part of optimizing Windows faster or not?

  All updates driver released by device manufacturers carry a description that explains the purpose. Sometimes the update improves performance and sometimes degrades performance. Therefore, use the manufacturer of device to update the drivers. Third-party tools is not reliable.

• 4K @ 60 Hz fichier_ecriture deleted on the bootcamp driver update?

  Hello, I currently have a 2015 Macbook pro with a M370x AMD 10 under bootcamp with the graphics driver 6.0 Windows Update installled.

  I am running a LG 27UD68-P on the mini display port with an adapter Club3D HDMI 2.0.

  This will run out 4K @ 60 Hz very well on Mac OS X and same bootcamp without updating to 6.0 graphics driver was last updated.

  Now that I've updated, my refresh rate is only limited to 30 hz, even if AMD Radeon is the maximum resolution supported and the refresh rate is 60 Hz 4K.

  I've updated the graphics card drivers previously using the method of unofficial workaround for the AMD driver version, but I re-installed Windows since then and you just want to know if it is possible with the latest updated version? If this is not the case, what would be the next driver update be scheduled for possibly?

  Thank you.

  No one on the CSA can provide you with a date.

• After opening firefox, maybe a minute later, a Web site called DRIVER UPDATE is displayed. How does work and how can I stop this?

  It has nothing to do with the homepage which is set for Google. The long delay between the opening with Google and the appearance of the Windows Vista drivers, which is a Slimware utility, is not understandable to me.

  Hello

  Unfortunately, it seems that you have a virus on your computer. Try it following one of these guides to remove it (I'm not sure that you are affected by, but one does not appear to affect Vista?):

  • http://www.fixyourbrowser.com/removal-instructions/remove-Windows-7-driver-update-pop-ads-virus-removal-Guide/
  • http://www.fixyourbrowser.com/removal-instructions/remove-update-Windows-drivers-now-ads-easy-removal-Guide/

  The two have similar steps and use the software free anti-malware software such as:

  • MalwareBytes' Anti-Malware
  • AdwCleaner (for more information, see this other AdwCleaner download page)

  Good luck with the kidnapping.