Failure of the user after windows update connection service 8

Similar Questions

• eror message when I connect a profile of the user of Windows Vista Business Service has no logon.

  eror message when I connect a profile of the user of Windows Vista Business Service has no logon. Failed to load the user profile after wimdows update I have this problem I try safe mode but the gel keyboard, I try F12 boot does not work please, someone came to help me I need my computer for work

  Hello

  as you can not get into safe mode and work within the keyboard freezes in safe mode to do a startup repair disk

  then do a restore of the system of breast

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and to read this information to try to fix the user profile cannot be loaded problem

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Monitor the issue after Windows update

  I installed the Windows updates today, and after installing and restarting, the saturation of the color on my monitor is out of line. There is intense color saturation and it made all my files photo as well.

  Running windows 7 and a HP w2338h monitor.

  Thanks for any help on this

  fifthboss,
  You should look through the updates installed to see if there was an update to the video card.  I would then check with the manufacturer of your video card for the latest driver.  If you just updated to the most recent and feel it affected the color then you can restore the previous driver.  Then you can contact the manufacturer of the video card on the driver and they know the issue and see if they are still aware and have a fix. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation failure repeated the error code Windows Update 80070643

  Repeated failures to install 'important' update of Microsoft Office 2003 on Windows Vista Edition family Basic. Difficulty she also failed. Error code 80070643. This can be corrected?

  Hello

  Try the steps mentioned in the link below and check if that helps.

  Windows Update error 80070643:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  Hope the helps of information.

• Sounds of crackling static jerky in the middle of the game, after Windows Update

  Hi, today made until 2 weeks after some Windows updates, I think it could be a Windows Update, my sounds in games are after some time cracking and with a static noise, if I managed do ALT + TAB, the sound is very good.

  In Windows-based applications and the SO itself you can see sometimes but weak in games it get worse.

  I try the first troubleshooting and try reinstalling the audio drivers, the same thing happens, second I try the edge we but less frequently.

  I have no ideas of what could happen, I have not changed hardware or drivers in the last 2-3 weeks (except for troubleshooting).

  I try to post a sample of what happens suddenly in the middle of a game: https://www.youtube.com/watch?v=DEtQroux-Xs

  The sound card is an Asus D2X PCI - E in a card mother Z87-G43-GAMING, if this is useful running on Windows 7 64.

  Please help so we could identify where the problem is. Kind regards.

  Hello

  Thanks for the update on the issue, I appreciate your efforts to resolve the issue.

  • Game in which you are facing problem with?

  I suggest you to uninstall the game and reinstall it in compatibility mode and check.

  1. Open programs and features by clicking on the Startbutton, click Control Panel, clicking programs, and then clicking programs and features.

  2. Select the game and then click Uninstall. Some programs include the ability to modify or repair the program in addition to uninstall, but many simply offer the option uninstall. To change a program, click change or repair.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Now reinstall the game in compatibility mode.

  To do this, see the article below

  Make older programs in this version of Windows

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  Thank you

• Failure of the Installation of Windows Update, error ox643

  I tried several times to install updates: Microsoft.NET Framework 1.x, 2.x, 3.x and 4.x and they always fail to install. (error ox643)

  I am running the latest version of XP.  Fix, he can't find any problems

  Error codes?

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  More information here: http://taurarian.mvps.org/Framework/Net_Framework.htm

• Pavllion dv7: freezing of the mouse after Windows update 10

  After installing Wiindows 10, my pointer or mouse freezes or stops for a few seconds before it can be committed. I read a post on the HP forums who suggested to install the updated driver. My computer preparing to receive automatic updates and States that there is no new update to install. I have seen and tried several suggestions on the internet, but nothing has worked to resolve this issue. I don't know why it was necessary to upgrade to 10 Windows when Windows 7 has been working very well. For my use, this problem is almost dibilitating. Can anyone suggest something else that could solve this problem?

  Hello

  Can you post back with the following details.

  1. the complete model number and your notebook dv7 series Nr - you can usually get this by holding down the fn key and pressing ESC, or see here for a guide to the location of such information.

  2. the pointer seems to freeze at random, or after a specific action (ie using the keyboard)?

  Kind regards

  DP - K

• Laptop does not accept the password after Windows update

  Last Thursday my computer set up regular updates as usual.  When I restarted the computer, it cannot accept my password to complete the start-up operation.  I checked that I had the correct password and caps was off.  Now cannot access the laptop at all.  It is configured with Windows Vista, is a computer dell laptop and I bought it at the beginning of 2009. It seems that I never put a password reset disk and I don't have the original installation disc of vista with me - it all happened to be loaded.  Tips to get again access my laptop?

  Hello

  Responses cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  What to do if you forget your Windows password (Vista and Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot boot to the desktop after Windows Update

  Original title: windows vista startup

  I recently downloaded IE9 to my laptop and updates of windows (prereqs) now my laptop does not open in Windows, when I turn it on, it also says start windows repair but all I get is a blank desktop with a bar and microsoft Corp. under any suggestions

  Hello

  Try to follow the steps in this link and do a system recovery: http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7 (steps are also applicable for Windows Vista)

• "limited connectivity" on after windows update wireless router.

  Original title: "limited connectivity" on after windows update wireless router. happens all the time after soundcards implemented to date. I then 'restore' on the eve of going online. Why?

  I have... 'limited connectivity' icon wireless router in the toolbar after windows updates. happens all the time after windows updates. I then 'restore' on the eve of going online. Why?

  Hello
   
  What operating system do you use?
   
   
  Method 1:
  Check the update has been installed and make a note of this update.
  To check, follow these steps:
  a. Click Start, in the search box, type in update
  b. click on windows Update
  c. click view update history
  Note: If this isn't a significant update, you can hide the update.
  To hide an update, follow these steps:
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  b. do one of the following:
  o click the link that tells you important updates are available if you have some updates to hide.
  o click the link that tells you optional updates are available if you have optional updates to hide.
  c. Select hide any update you want to hide, right-click and then click on update. Do this for each update you want to hide.
  d. click OK.
  
  If it an important update then you can try the following method 2:
  
  Method 2:
  Download the update of the article mentioned below (enter the number of the update in the search), put the computer to boot and then install the update and check if that helps:
  Download here: http://www.microsoft.com/download/en/default.aspx
  Clean boot: here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Cannot connect to internet after Windows Update

  I was not able to connect to the internet after windows updates 7 of 14 October 2010, unless I have to restore the system to October 13.

  Hi jlm00926,

  ·        Update that you installed before the problem?

  ·        Are you able to connect to the internet properly now?

  You can set up your computer in a clean boot state. Subsequently, download & install the update manually from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Clean boot will start Windows 7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Good question after Windows update on Satellite P100 PSPA3E

  I encountered a problem with my sound card after a Windows Update. It became an old analog tuner with problems of dust on his volume knob. (this is a reference "sounds like" for those old enough to remember) I updated the driver to the most recent DriverGuide.com, no joy.

  I even did a complete system restore "with the"product restore disk."" Which fixed the problem until Windows updated the right files for trash again. I don't know what files do the dirty on my card since most of the windows system updates are performed while I "continue to work! Anyone with ideas?

  Thank you

  JD

  Hello

  What operating system do you use? XP or Vista?

  Satellite P100 PSPA3E must use a sound chip Intel high definition audio Conexant CX20551-22.

  I recommend to remove the sound card in Device Manager after installing Windows updates.
  Then restart the computer and install the latest audio drivers available that support the sound chip HD Conexant CX20551-22.

  First of all, you should try to use the driver for the Toshiba page. If this does not work, check the Intel page!
  Please don t forget to restart the laptop after windows update finished.

  Best regrads

• HP Pavilion Notebook 15-p119: Windows 10: since the execution of Windows update, I can't connect to the wireless network

  Hello, HP assistance.

  I'm having a problem with the connection to my home Wi - Fi network. I am sure the problem has nothing to do with my material and is a problem of Windows only.

  Here's the story: I was fortunately with the Internet from the network before and Windows was connecting automatically every time. But since the Windows Update recently it does not connect. Sometimes it says "unable to connect to this network" and then sometimes it comes up with a box asking me to enter a user name and a password. The thing is... I've never set up a password in Windows for Internet access, so I do not know why he was asking me now. I looked around the Internet via my Tablet (which is connected to the same Wi - Fi network fine, with my phone) and found that it is a common problem. And yet, none of the solutions work for me.

  I wonder if the solution is somehow change the settings so that a password is not required to connect to a network. Or maybe enter a default user name and password when the box appears again. That said, the box did not come for a while.

  Help, please!

  Thank you for your query.

  I understand that your mobile phone works well and you didn't have any problems with your wireless connection. After the upgrade to Windows 10, your wireless network is intermittent and will prompt you for a user name and password.

  The guest is not the Internet, but rather to join your network. He is looking for the network name and password.

  When I did a search for HP laptop 15-p119, I was unable to locate this model. Would you please check your model? How can I find my model number or product number?

  After the upgrade to Windows 10 did you all your Windows updates?

  Sometimes it fails to be installed automatically, if you can try running the Troubleshooting of windows update. to maybe gain others.

  You run the HP Support Assistant since the upgrade?

  If the problem persists, once you have established a test of Wi - Fi automatically update drivers Device Manager wireless.

  • Right click on the Windows button in the bottom left corner, then choose Device Manager

  • Click network to expand the list

  • Right click on the wireless adapter and choose put updated driver

  Select "Automatically search for updated driver software" this month may start a download to install a newer driver.

  Here is a link that can also help. HP PC - troubleshooting wireless network and Internet (Windows 10) 

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to resolve your problem as " ""Accept as Solution"" " to help other members of the community!

  "To show recognition for my efforts, please click on the" ","inch Up Icon " below.

• failure of the system after the installation of windows 7 upgrade advisor

  original title: failure of the system after the installation of the Advisor to upgrade to windows 7, which now, I can't delete

  My Winows Vista worked fine until I downloaded the windows 7 upgrade advisor - the system crashed, only load windows in safe mode, and when I try to delete the Upgrade Advisor program, it tells me windows service install is not available...

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  .

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Section user and Windows Update missing in the setting of the computer in Windows 8, as well as other errors.

  Section user and Windows Update section of the computer in Windows 8 setting is missing.

  Open Control Panel > user accounts > make changes to my account in the computer setting.

  "Page not found. Sorry, the page you requested is not available, or you have found an outdated link. "is displayed.

  I already tried Microsoft scanner security, sfc/scannow, auto repair and record using a hidden administrator account.

  My power plan option page is also absent and when tried to open the parameter, "unable to open the access control editor. the activation requires the display name to stand under the CLSID key. Also, while trying to open the properties of the network connection, "an unexpected error has occurred" appears. I don't know if these problems are related.

  I agee with dietydiablo, it was not pleasant to have to do a refresh and reload everything.
  Also use even win 8 Pro with WMC.
  I could not afford to wait and to solve the problems, and the update was a faster option. But I keep an eye on it now that if it happens again, I know when it happened.