Failure to configure updates

Similar Questions

• problem with windows update - said failure to configure updates changes in recovery

  Original title: problem with windows update

  computer says failure to configure updates changes in recovery but when you check the update history, he said updates succeeded, but one of them failed its been happening every time I turn on my computer went thrus my updates or not has them and if I update my computer will fix the problem

  Hello

  Thanks for the reply.

  Have you checked by installing the update manually?

  Send more information on the update failed, code number and update KB message.

  • Press the Windows and X keys simultaneously.
  • Click on Control Panel, then click on Windows Update.
  • Click view update history.
  • Double-click the update.

• Not able to install KB2345886 gets error failure to configure updates.

  Original title: failure to update given.

  When I start my computer, I have a problem in windows. failure to update windows 7 x 64 kb2345886

  Hi ralph,.

  ·        Do you have an error with the error code when you try to install the update?

  ·        You are able to correctly install the other updates?

  a. you can run the Windows Update Troubleshooter , which will reset all Windows Update components on default.

  b. then, try to install the update from this link.

  Update for Windows 7 (KB2345886)

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you install Internet explorer 9, receive error message "failure of configuration updates changes recovery" BUT the update history shows successful

  Running Windows Vista and it is impossible to update to Explorer 9.  Also successful shows in "installed updates", but does not appear in the option "uninstall update"

  Hello

  ·          Are you able to access Internet Explorer 9 and use it?

  ·          When exactly do you get this error message?

  ·          You get this error message every time that you start the computer?

• Failure of configuration of updates of windows 8

  I downloaded the updates so many times. After restarrting pc it config. less 40% and is said failure configuration of updates... can I update 8 8.1 or install whole new 8.1?

  I downloaded the updates of 100% and installed after restart

  It kept looping on the failure of configuration updates, 4 hours

  and again said download updates after releasing, I want to update to 8.1. need help

  Hello

  Sorry for the delay.

  As you use the 'Volume licensees' version of "Windows 8", I suggest you check out the link below and check if it helps.

  Support for volume Licensing Service Center;

  https://www.Microsoft.com/licensing/ServiceCenter/help/contact.aspx

  Also I suggest you to consult the article below General availability Windows 8.1

  http://blogs.Windows.com/ITPro/2013/10/18/Windows-8-1-General-availability-the-it-Pro-perspective/

  Meet us, then we can help you further.

• "Failure of configuration of the windows updates". error: WindowsUpdate_80070003 / 0 x 80070003

  Original title:

  "Failure of configuration of the windows updates".

  Hello

  I use Windows 8 and updated to 8.1 last month after graduating from the messages on HP laptop. As soon as I updated to 8.1 it stopped working correctly. It has become very slow and I was unable to perform any task. I went back to Windows 8, once I had this option. Since then, I get this error message «Failure of configuration updates windows.» Restoration of the changes. Do not turn off your computer. »

  I also tried the clean boot troubleshooting mentioned here: http://support.microsoft.com/kb/929135

  However, I get this error: WindowsUpdate_80070003 / 0 x 80070003

  Please help ASAP!

  Hi John,.

  I will try to help you with this question.

  Thank you for the information provided. Coming to the question I would like you try these steps and check if that helps.

  Method 1:

  Try the steps from the following link and check if that helps.

  Error code Windows Update '0 x 80070002' or '0 x 80070003 '.

  If you still experience the issue after trying the steps in the above link, try the following steps:

  Method 2:

  See the following article try the steps that you have not yet tried and check if that helps.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358 

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode. Also when you do the system restore, you will lose data and the programs that are installed on the date you make the system restore.

  Make sure that you back up the data on the computer before performing all the troubleshooting steps.

  Method 3:

  If the previous step fails then please go ahead and try the following steps:

  I suggest to rename the pending.xml file, and then change the registry.

  a. boot from the DVD of Windows 8.

  b. click on repair your computer.

  c. click Troubleshooting, and then select Advanced Options.

  d. Select the prompt option.

  e. Once you open the command prompt, enter the following command and press ENTER.

  f. type cd C:\windows\winsxs, and then press ENTER.

  g. type ren pending.xml pending.old, and then press ENTER.

  h. system cannot find the specified files

  i. type regedit and press ENTER.

  j. select HKEY_LOCAL_MACHINE.

  k. on the file menu, click on load the hive.

  l. find the following folder:
  C:\windows\system32\config\components

  Mr. When you are prompted for a name, type Offline_Components.

  n. in the registry editor, locate and delete the following registry subkey:

  HLKM\Offline Components\AdvancedInstallersNeedResolving
  HLKM\Components\AdvancedInstallersNeedResolving
  HKLM\Components\PendingXmlIdentifier
  HKLM\Offline Components\PendingXmlIdentifier

  o. quit the registry editor, type exit at the command prompt, and press ENTER.

  p., click on restart.

  
  Note: the steps mentioned below include editing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Please return to the State of the question.

• Error "FAILED TO CONFIGURE UPDATES of SYSYTEM REVENANT of CHANGES DO NOT turn OFF YOUR COMPUTER"

  Respected by all,

  Could someone help me please with the problem. I can't access the windows at all. It has blue screen that says "FAILURE TO CONFIGURE updates SYSYTEM RESTORE CHANGES updated DO NOT turn OFF YOUR COMPUTER" pls help

  You may need to stay on this screen for not more than one hour, if there are serious problems with Windows Update.

  If you can always access your PC after waiting, turn off your PC. Then turn it on, immediately pressing F8 constantly. Once you get a black screen with options, select Safe Mode with the arrow keys and press enter on your keyboard.

  Once Windows finishes loading of files, you can start in safe mode, where you should be able to log on normally. You will notice that the screen resolution has changed, and when you log in, you will see a black desktop computer. This lets you know that you are using safe mode. Once you log on, restart normally.

• Failure to configure Windows Update

  Hi rich,

  Sorry to know the steps of troubleshooting force worked for you.

  Please follow these steps and continue with the next steps to reset the Windows update components.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

   

  Follow the steps below to install the selective Windows Update:

  Follow these steps we will know what update is a problem and we will try to solve the problem on the basis of that.

  1. Go to control panel-> Administrative Tools-> Services and scrolled down to find the "Windows Update" service and stop it.
  2. Then restart again and go back to Windows Update, it will display all the current updates available. You must deselect all updates and select only the first two and install it, must be installed successfully (reboot required).
  3. After the reboot, chose two more and install. Then choose 5 updates and install them. That must be installed successfully (reboot required).
  4. The restart will take a long time. You can see "Configuring Windows updates" for about five minutes. After the restart, select the remaining current updates, including an update of the driver in option. They must install as well successfully (reboot required).

  Hope this helps, get back to us if you need further assistance for Windows.

  Shrinkar,

  I did those batched updates since last week. It works for most, but I've only had a left which is take back me to the "failure to configure...". ». It starts at 30% and after it configures the windows updates, but as soon we get 67% to 100% then "failed to... set back changes...". "appears again.

  BTW, this is the windows update try to configure for ages

  

• Failure of windows updated y580 configuration

  I get the message "failure of windows updates changes to return" when I try to update my computer, can someone please help with this? How can I make sure that updates are going through?

  ' afternoon.

  Please check if KB2647753 is in your list of updates to install. If so, install everything first, everything about him with no other update selected. do a required restart. Once installed successfully, all others must succeed. It is a known Microsoft issue.

  Please let us know if it works for you.

  Kind regards.

• Windows update failure "Configuring updates: stage 3 3-0% complete.» Do not turn off your computer.

  I try just turn on my computer, and I get a "Configuring updates: stage 3 3-0% complete.» Do not turn off your computer"let it sit and continues just to treat then turn off and back on - only to endlessly repeat the problem.  I can't do anything else that the menu hep access by pressing the F2 key, but I can go anywhere with this option or the other.

  Thank you for your help.

  3Ran

  Hello 3Ran
  Thank you for using Microsoft Vista answers Forum!

  Michael Murphy has provided these steps already; I'll just say it in a different way.

  Because you can't go to your office, I suggest that you start your computer in safe MODE. Next to normal mode, it is a different way to connect to your computer and makes a few changes when the problem.

  HOW TO START YOUR COMPUTER IN SAFE MODE

  1. Restart your computer if it is running.
  2. Press the F8 key after your computer powers initially.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. Up/down arrow keys to highlight your selection.
  5. Select Safe Mode with network and press enter.
  6. You should see loading drivers and then Please wait.
  7. You should then be on the Welcome screen.

  Connect to your computer using an account with administrator privileges.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• failure of cofiguration - Vista stop configuring updates stage 3 of 3

  original title: configuration failed

  my windows vista computer stuck on configuring Update step 3 of 3 0%

  Hello

  I suggest you try the steps below and check if it helps

  Method 1: Try to reset the default Windows Update components and check if you can install the update.

  http://support.Microsoft.com/kb/971058

  Method 2: The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7.

  http://support.Microsoft.com/kb/949358

  Method 3: Also check the update history.

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Let me know the description the updates that do not have the status.

  More information: See problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• Default configuration updates/changes...hang

  Hello

  I come here with a difficult problem... I have a Probook s 4740. It comes preinstalled with Windows 8 and HP security tools. Recently, I decided to upgrade to 8.1 Windows and for that I had to uninstall HP security tools. I did the uninstall and update of Windows. After a day of using the computer hang. I have updated using HP recovery. As the version of the OS was old he himself day after a day or two. The update went well. After starting windows the next day he started the configuration of updates. Something went wrong and it failed with: "Failure of windows configuration updates from reinstatement of changes". She suspended and never finished. I've refreshed believe once again that it does not refresh correctly. All of this happens again. After updating once again, then whole reinstallation of windows, the problem persists. At this point, I updated the computer 4 times and reinstalled Windows 1 hour. I tried to disable all the services non-windows and update according to the guidelines of this forum: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Failure-configuring-Windows-upd, but it did not work. It failed with: "default configuration changes in windows. Changes in return ".

  What should I do? My laptop is still under warranty of extednded. Can I make a soft/hard reset or take my computer of sevice? I hope I can solve this on my own as being without my cell phone would be very inconvinient. Other solutions? If you need further information please tell.

  HP Probook 4740 s

  Product number: H5K32EA #BED

  OS: Windows 8 pro 64-bit

  Best regards, Tony.

  Use the HP recovery media to access the Microsoftsystem to restore and then choose a restore point dated before the update of events that caused the stroke.

  

  Note the number of the update and make sure that you leave not only one install new. You can do that by changing the update of Windows settings from install automatically to informez me update availability, but let me decide to download and install updates.

• My computer is stuck in ' configuration updated: step 1 of 3-0% complete.» Do not turn off your computer.

  My computer said there has been updates to install yesterday evening, so I clicked on the stop icon to update. This morning when I turned it, it says "configuration updated: step 1 of 3-0% complete." Do not turn off your computer"but does nothing.

  My computer said there has been updates to install yesterday evening, so I clicked on the stop icon to update. This morning when I turned it, it says "configuration updated: step 1 of 3-0% complete." Do not turn off your computer"but does nothing.

  Hey Janeynflorida

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If that does not fix it try repost in the forum update windows for your updates problem

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Vista - Error Code: 800F0816 (could not install KB2296011) Hung to configuring updates 3/3

  Laptop from my dad recently started showing "configuration updates 3/3" followed back changes not configured message. It is on a continuous while loop that will sometimes allow windows Vista Home Premium to start. I checked the history of update and the first failure is KB2296011 which shows the error code 800F0816.  Currently, I have his laptop but cannot access the internet because it does not connect to the internet via my network (do not have the knowledge necessary for to be difficulty)

  Can someone help me solve this recurring problem. If necessary I will be able to access the internet on the laptop question but would like to know a solution offline if possibel. I don't want to pay Microsoft Help for the answer. I'm not very literate pc so a simple solution would be better.

  You don't have to pay "Microsoft Help" for a response from the update that you have posted, KB2296011, is a Security update.
  Of MS10-081: vulnerability in the Windows common controls library could allow remote code execution (KB2296011)

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  800F0816 - express package has not been completely downloaded. The status of the operation was recorded while the package is downloaded. An express package is a package that you are installing by using Windows Update. With these packages, only the files needed for that specific computer are downloaded and installed (unlike when all is downloaded to a computer).

  For a 'solution offline' you can try to manually download each update to the computer you are currently using and then transfer to the portable touched with a USB key.
  Then see if they install correctly. Given that we do not know all the edits concerned... open Windows Update in Control Panel, and then click View update history link to see updates try to install.
  Note that the KB numbers are updated and post them in this thread or,
  go to the Microsoft Download Center, enter the KB numbers in the field to Search all Download Center , click the magnifying glass to search and download for Vista updates that correspond to the architecture of the system. (The architecture of the system is displayed when you open System in Control Panel and look at the side of System: type.)

  Save updates. When the downloads have finished, close the browser and all other open programs and install them one at a time. Suggest that each time you are prompted to restart.

  You can configure the phone assigned to the clean boot. Then see if the connection is restored, the updates can be downloaded and installed-
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  Expert MowGreen Windows IT Pro - consumer safety

• Vista: Configuration update

  Update watch "Configuration updated step 3 3 99% complete" then it stops. After the reboot, it shows "Configuration updated step 3 3 99% complete" then again. Tried pass mode without failure, update configuration begins again.

  KAP

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner