Failures of SMS to the network in New Zealand 2degrees

Similar Questions

• I gifted my father music and a song of the AUS iTunes, but they upload because it is outside the Australia (in New Zealand). Is there a way to get around this? There is only an iPad.

  I gifted my father music and a song of the AUS iTunes, but they upload because it is outside the Australia (in New Zealand). Is there a way to get around this? There is only an iPad.

  "gifts can only be redeemed in the country store that they came from".

  You can try to contact iTunes Support through CHAT or by phone. -They can try to solve this problem.

  https://www.Apple.com/support/iTunes/

• How to allow phone to send sms to the short number new

  Hi all, I sent a text message to a SpeedDial earlier (digit 5 used by the Bank, etc.). The device prompted me that sms may incur extra charges and asked me if I afford it. I accidentally hit "never allow" and "don't ask me" (these two came after another in a row), but I wanted to send messages. I tried to get the settings and the settings of the e-mail, but I can't find anything that let me allow to send messages to dial again. When I google my problems, the results that I found are mainly on Samsung orz. Samsung has an application manager to adjust the setting, but I can't find it on sony. Can someone tell me where I can change the settings to allow this type of messaging again? Thank you!

  Hi Ywjong,

  Welcome to the community,

  You should try the app without compensation.

  Menu > settings > Apps > all > email > clear default values

  Let us know if that helps.

• Configuration of the network on New Installation

  We recently expanded our install ESX and now would like to implement vMotion with our vCenter Server. I'm just trying to wrap my head around a good network configuration. Each server vsphere has 8 shared between the 2 cards network cards. Here's what I thought where a config, I need just comments if this configuration is good or not:

  • 0 - Service Console (on LAN) interface

  • 1 - VM LAN Access (on LAN) interface

  • Interface 2 - iSCSI (on dedicated iSCSI Switch)

  • Interface 3 - VMKernel (on dedicated iSCSI Switch)

  This configuration duplicate the second NIC 4 ports for failover or load balancing. This configuration works, or what I have to do anything? I went through a lot of technical documents and that is the conclusion I came to, but I want to make sure I'm not in the wrong lane before getting everything that the installer.

  vCenter has no access to the iSCSI network unless it has an iSCSI HBA or you will use an initiator of the host of VC software to access its own iSCSI storage - I

  case of the vmotion netwrok that there not to ride on the same network segment iSCSI - it will be enough to find on its own isolated network segment.

  peut

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Playing discs blu - ray in New Zealand

  I burned a blu - ray disc and sent to the members of the family in New Zealand. Who can't play TI-no is not recognized. They have a blue-ray player. I understand that Blu - ray is not NTSC or PAL, but there are regional restrictions. What region incorporates the FCP? I can change it to 0 or all regions.  Hello I have this. What other reasons could be?  Thanks for your suggestions!     Burned us spec Blu - ray without problems.  Chris

  Mac Pro 2010 14 GB using memory

  10.11.4 OS

  FCP 10.2.3

  BD-RW BDR 207 pioneer burner

  I can't answer some of your questions, but...

  To burn a project to the Blu - ray format in the 'Share' Option, I select... "Master File" (not Blu - ray), which produces a .mov file. This is the .mov file what can I import into my Samsung BD burner for treatment.

  Hope this helps, but not sure!

• I have the network wireless with an extreme airport using my base station that dessert 4 Airport expresses. I want to replace the base station with a time capsule from apple.  Are there specific instructions other that connect the new time capsule

  I have a wired to the internet using my base station for 4 expresses the hard extreme airport.  I want to replace the base station with a time capsule.

  It is also easy to replace the existing base station and adding the name of the network and the password?

  You should be able to transfer your configuration of your current access point to new, and then you would just set up the internal drive, try to look at these articles:

  ith-new http://www.TechRepublic.com/article/apples-Airport-extreme-out-with-the-old-in-w.

  -one-airport-extreme-or-time-capsule-to-http://www.iclarified.com/31189/How-to-Transfer-Your-configuration-settings-fromanother

• I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired.

  I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired.  How can I fix it?

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  Hello

  You need to support iPad not Microsoft.

  iPad - media choices
  http://www.Apple.com/support/

  iPad - Support
  http://www.Apple.com/support/iPad/

  iPad - communities (Forums)
  https://discussions.Apple.com/index.jspa

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD ID

  Dear Sir

  Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD ID

  I am in a field & I'll migrate with a domain name.

  EX: now I'm in the field of the AAA tomorrow my domain name will change to BBB. User accounts are created in two AAA & BBB and the two domain user IDs are different.

  data servers are also migrating with the new domain.

  is it possible to access share with the old user id folder in new field or both to share the files again with the new user ID Active directory.

  Kind regards

  Chauvet J.

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I installed a new OS and now I have no wireless on the list of the network. I can't connect to my pro overdrive unless it is attached. Is there a download I need?

  I installed a new OS and now I have no wireless on the list of the network. I can't connect to my pro overdrive unless it is attached. Is there a download I need?

  Download wireless network drivers

  Visit the manufacturer's Web site and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions.

  If you cannot access to the use of the internet, another computer and save the driver on a CD/DVD/card reader.

• My new system see the the old system in the network, but I can't get the passwords to work and I tried all the. Now what?

  ESTABLISHING A NETWORK.

  My new system see the the old system in the network, but I can't get the passwords to work and I tried all the. Now what?

  Hello

  1. don't you make changes on the computer before the show?
  2. what version of operating system you are using on the computer?
  3. which network you're talking about (home wireless network or group)?
  4. which steps have tried?

  
  If you use a group home on the computer, see the link for more information.
  Home Sweet homegroup
  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  You can also check out the link.
  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126

   
  Provide us more information for you to help.

• How can I get my new/old office to connect to the internet? I ran to the implementation of new Internet and network connection wizards, nothing happens.

  LAN and WLAN connections

  My old wired desktop xp died, it was the first computer on my home network. My friend just got a new office and gave me an old. I have a laptop which has windows 7 and is connected wireless. It is still plugged in and works fine.  How can I get my new/old office to connect to the internet? I ran to the implementation of new Internet and network connection wizards, nothing happens. When I go to internet connections, it shows that it is connected, but I can't seem to connect. Help, please!

  Hi ShannonStrong,

  ·         What exactly happens when you try to connect to the network?

  ·         You receive an error message or error code?

  You can follow the steps in the Microsoft Knowledge Base article mentioned below and check.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  You can also see this article:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Note: The article also applies to Windows XP

  Let us know if this information useful.

• I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  network cable unplugged wiundows xp

  I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  Hello Verashanley

  Since how long did begin?
  You have added a new software or hardware to the system?
  If the issue took place recently then you can try the system restore.
  How to perform system restore in Windows XP.
  If you have recently added anything to the system (hardware or software), then remove.
  If the system restore does not then check in Device Manager and verify that the network card is considered and no errors appear.
  To open Device Manager, click Start, and then click Control Panel. Click performance and Maintenanceand then click System. In the hardware tab, click Device Manager.
  Check the type of network card you have and that you try to update the drivers from the hardware manufactures Web site.
  Also, check the connection for the network adapter. Do you see any physical damage. When you plug the NIC saw all the lights on the network card lights up? If not, then you can deal with a hardware problem and need to contact the manufacture of the system and see about obtaining the card replaced.
  Let me know the results. Thank you.

• Automatically get new IP settings for the network adapter

  I have a home network with two computers Vista and I have a Vista laptop for work.  Where my work laptop is home it does not automatically connect to the internet, similarly if I want it.  When I go to network and sharing on laptop computer center it displays icons for the laptop, my home and internet network.  Threre is a X red between the network icon and the internet.  If I click on the red X a pop-up window indicates that Windows checks the problem.  Then a box will appear with several options, one if which is automatically "get new IP settings for the NIC 'Wireless Network Connection'.  When I click on a window pops up that says repair, and after a brief interval, she announced that the problem has been fixed, and it was fixed.

  How can I configure things so that she will do it automatically without this manual intervention.  There must be some way because I have never asked a password or permission to continue.

  If I turn off the laptop and then turn it back on a few moments later, the network connection is still there.  The problem occurs when I try again a few days later.

  Thank you.

  P.S. I tried to submit this a couple of days, but it does not appear under my son, so I don't know what happened.  If the previous post is without me being able to find I apologize.  I don't like having to type things, that's for sure. Jim

  Thanks for the reply.  I did it.

  I'm not sure it would fix the problem however, because the problem occurs after a day power off and power back up a few days later.  So presumably the power to the network adapter has been disable for power off intervals.

  Something happened tonight when I put under tension.  Asked me to confirm something on the network (unfortunately I can't remember what) and after that, I was connected to the internet - without having to go through the manual process described with my problem.  So maybe something has been reconfigured will correct the problem. Jim

• Unable to connect new devices to the network

  I have a WRT610N which does not allow me to connect all devices to the wireless network. He is a recent problem I was able to connect new devices before. Devices on the wireless network, those who have been on the network are able to disconnect and reconnect. That new devices are excluded. Went through the admin screens to see if something is wrong, but can't find anything. Any suggestions?

  Disable wireless security all the and try to connect with any temporarily.  Make sure that the MAC address filtering is DISABLED.  If you can connect now to go back and add the security on.

• After buying a new printer Windows Vista is unable to find it on the network.

  original title: adding Vista network printer

  I am running Windows Vista on my laptop and connect to a network home wireless. I replaced my old printer (which I could access the network) with a new one. I tried adding a printer (using the guests) but Vista could not find the printer. I can use Explorer via the wireless network, but it still can't find the printer. What I am doing wrong?

  Dave!

  Hi Dave,.

  1. You receive an error message when you add the printer?
  2. What is the number and model of the printer?
  3. You have security software installed on the computer?

  Try the following steps to add the network printer on the computer.

  (a) printers open by clicking Start , clicking Control Panel, hardware and soundand then click Printers.

  (b) click on Add a printer.

  (c) in the Add Printer Wizard, select Add a network, wireless or Bluetooth printer.

  (d) in the list of available printers, select the one you want to use, and then click Next. If your computer is connected to a network, only printers listed in Active Directory for your domain are displayed in the list.

  (e) If prompted, install the printer driver on your computer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (f) complete the additional steps in the wizard and then click Finish.

  Add or remove a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems