fans of slow sometimes, windows, upgrades to windows 7

Similar Questions

• My office is behaving strangely, slow, sometimes does not start Windows.

  * Original title: strange

  OK, so I have a desktop with Windows 7 installed above as my users families. My family tends to put viruses or other forms of malware on the desktop as they constantly plugging their friends drive etc. Last week my office just behaved strangely, running slow, sometimes not start Windows and even run checkdisk on each reboot. I have however to discover the reason for all these questions, because it turns out having a Trojan horse installed on the desktop computer that allows a hacker to access my PC remotely. AVG detects whenever I had scanned my office but unfortunately the Trojan horse is just renamed and removed to another place when detected. Last week I did a new install of Windows 7 and everything worked fine until yesterday. I noticed that AVG was not updated yesterday. I first tried to install what AVG but was unable even to reinstall AVG.  I didn't realize that once I have turn off the Windows Firewall I can install and update AVG without a problem. However the firewall Windows has not prevented never AVG update or install in the past. I thought it was a form of malware, the origin of this problem, but after the start of the HBCD and scan with malwarebytes and also to scan using Kaspersky rescue disk. I have not found a malicious software. Even my windows laptop 8 I have no problems updating and installing AVG, while Windows Firewall is enabled. I really believe that it's some form of malware with managed to bypass all virus scans. Please give me some advice and let me know what is the problem and the solution. Thanks in advance

  It has been long since I had no faith on average. :-)

  Use the removal of AVG on this link tool to completely remove AVG, following the installation of Microsoft Security Essentials here ...

  In addition, pull it out of Windows 8 and leave Windows Defender to take over. You will have less problems you get with AVG. There is no need to install MSE in Windows 8, as it's already there...

• slow after windows update

  Hello
  After windows update:
  my PC slowing significantly
  Windows search sometimes opens spontaneously
  pages (explorer) sometimes becomes white and the icons disappear and takes a long time to be closed
   
  I have ms security essential and it is updated, so I do not think that my system is infected.
  Thank you.

  MajidNavabi,

  • See the following topics

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us >

  http://support.Microsoft.com/FixIt/ >

  06/28 / 1106:37: 19 am

• Satellite P20: sometimes Windows boot with no sound

  Hi all!

  I have a problem with the sound on my Satellite P20, WinXP SP2. (Realtek AC97 audio)
  'SOMETIMES' Windows startup with no any sound!
  (Sometimes means that 3 to 5 days is Ok only...) I have all new driver and the latest Bios (v.2.10) installed, but without
  all resoultes! All I have to do is restart my computer and the sound works!
  In "Device Manager" is always all corect but still no sound.
  Is it a software problem material oder?
  Several months ago, I bought 2 memory card Kingston ddr333 so 512 MB (recognize in 1022 MB BIOS in Windows 1024Mo) and
  Module Kit Bluetooth PA3235U-2BTM. Is it possible that the memory or bluetooth module are not compatible with the motherboard... ?

  What is the problem and how to fix it?
  Thanks in advance and sorry for my English very poor!
  Dejan

  Post edited by: DejanH

  Hello

  What doesn work sound t? Only the operating system Windows sound doesn t work or also you don t have the sound output if play you CDs or watch DVDs?

  To me it looks ;) entries damaged registry and/or files of the OS.
  What about the new operating system installed?

  It would be very interesting to know if it happens on the new OS installed since the Toshiba Recovery CD.

• W700 increases the fan noise after 10 Windows update?

  As the title. Im noticing that the fan runs constantly since windows 10 update. Everyone has seen this? Manager tasks indicates that the processor is not power, but the fan runs continuously. Should I go back to windows 8, or an update will fix this?

  I think I would go to the Intel website and download the current driver of 4000 HD for Windows 10 (I think you're running 64-bit, so stick to this version). Uninstall the current drivers and delete the files, and then install the Intel driver before restarting. Restart and let it find the current driver and see if that makes a difference to the symptoms...

• Sometimes, windows does not start immediately

  original title: BOOT XP PRO PROBLEM

  I have Win XP Pro. Sometimes windows will not start immediately. I try to restart sometimes on 10 times or more, but not always, a lot. Suddenly, windows will be open on one of the trys. I always try to "last good" and "start windows normally".  Windows sometimes opens on either of these orders. It's annoying, but windows never fails to open later. Sometimes, there is no problem with it open.  I have read and checked the material, and they work properly he said. I'm not a computer technician, so I'm very careful about what get involved with. Anyone has an idea on how I can fix this? I don't want to repair or reinstall XP, because I've done this before, but this problem seems to persist much matter what I do.

  Your computer stops is correctly when you initiate a stop?

  From the third-party application, it resembles a form of spyware/malware - directed and download HijackThis and paste the content of your log file. Do not change anthing at this stage.

  Make a start > run > cmd > chkdsk c: /f /r > say Yes for Windows to check the next time you start of disc opon. Note the time and restart. When chkdsk is complete, go to start > run > eventvwr. Go to the submenu Application and look for an eventlog with the name 'WINLOGON' which is your time. Open it and click the button copy and paste the results here.

• How to set the maximum fan speed. on X230t (Windows 8)?

  How to set the maximum fan speed. on X230t (Windows 8)?

  I use TPfancontrol to set the speed of the fan in the X230t. However, this will result in excessive wear on your bearing X230t fan, which causes a premature fan failure. Is there a reason why you want to run the fan at max speed?

• sometimes windows media recognizes CD writing - sometimes not

  When you try to burn CDs - sometimes windows media program system recognize Virgin CD - R and the work - sometimes not.  Exactly the same CD - R blank.  Indicates updated w/updates.

  Hello Faye

  If the problem is intermittent, according to me, maybe it's all just be your lens needs a clean place, with a disc cleaning designed for use in pc.s or if it is a laptop and you can access the lens (arrow below) you can clean yourself (a very soft brush and a mild Tickle!) It's also a good idea to skim along the track to make sure they are not dusty (yellow lines)

  Best, Ric.

  

• Gmail load so slow on Windows RT 8.1.

  Gmail load so slow on Windows RT 8.1.
  He always loaded slow on RT. He used to take about 5 seconds to load.
  Now it takes 30 seconds to load.
  This worked OK we I had 8.
  Never mind. I fixed it.
  I had to check use Microsoft compatibility list and uncheck the display intranet sites in compatibility view.
  Now it loads as it did.

• Some games run very slow on Windows 8, as...

  Some games run very slow on Windows 8 as (chicken Invasion "v1, v2, v3" in red alert 2, Age of Empire 2)
  but on Windows 7 on the same Machine perform perfectly, I tried to install DirectX,.
  and tried to install the latest Version of the Driver VGA for Windows8 and tried to change VGA (Nvidia, AMD, Intel)
  but the games (not all games just a few) still running slow...? !!!
  Help, please...

  Wrong, wrong, wrong.

  This is entirely based on compatibility to a level beyond what is offered in the standard "Windows compatibility" section.  In addition to this, everything you said had absolutely nothing to do with the question.  This has nothing to do with starting or whatever it is in the same direction.

  What is happening is that something is interfering with the normal functioning of the game because of changes in the kernel of the operating system because it has been updated / rewritten since the inception of Windows XP.

  @SOVIETTION
  The most likely solution for you has nothing to do with the videobuffer here is how fix you it:

  Find the Red Alert installation directory and find the file * md.ini.
  In revenge for Red Alert 2/Yuri, it will be 'RA2MD. INI"(feel free to make a backup of the file before proceeding)
  Open it with your favorite text editor (Notepad for most people)
  Scroll down until you find the section [Video]
  Just below you will add this line-
  VideoBackBuffer = no
  Save the file in the same place and load the game.

  Enjoy!

  The VideoBackBuffer = none works perfectly, but in my case I also had to set the compatibility mode to Windows XP SP2.

  Bravo for you!

• Slow menus after upgrade V3

  Since the upgrade to V3 my menus have become extremely slow. I had the same problem when working with a demo of Sony device until I received my camera with the already loaded V2. Anyone else has the same problem?

  I had slow menus after upgrade to version 3 and fiddeling with parameters. Also, the waveform window was empty. Reset an all. That solved.

• The dc7600 fan not slowed down speed

  I'm new here but I have no news for the repair of computers, a problem which therefore left me speechless!

  A customer brought me a Hp DC7600 SFF desktop computer and said that the thing is so loud it doen't want to use it.

  Card"Pentium 4 3.00 Ghz

  2 GB DDR2 533 memory

  320 GB HD

  Win 7

  I lit and was swept away, this thing is so strong that you does not think!

  I disconnected the chassis fan that he calmed down some but the CPU fan turns at 5400 RPM all the time, I can't get the fans to slow down! I tried to use the program Speedfan, it was a joke.

  I am at a loss for what to do and wondering if something on the Board that controls the speed of the fan go haywire. I also upgraded to the latest BIOS and that did nothing.

  When the computer starts, it seems frankly a small liquidation aircraft prepares for take-off!

  What to do, what to do? ANY suggestions would be most appreciated.

  Thank you for your comments/ideas and suggestions. I would recommend he get a newer system because I think it's history! We have done everything that we can and it's time to throw in the towel! Thank you so much!

• fan slow 5750g Windows 8

  Hello

  I'm having a problem with my Acer Aspire 5750 G. I'm not usually a gamer, but under use heavy, the fan does not go to high speed, so he ends up overheating and shutdown of the laptop.

  This problem is present on the Windows 8 operating system. The laptop stops, I immediately start the laptop, the fan is 100%, and as soon as I load Windows 8, it goes somewhere to 50% maximum. In ubuntu, the fan remains at 100%.

  It seems that only the speed of the fan is affected, if the laptop is cool, the fan slows down.

  Welcome aboard, you two. In both cases, it looks like a software problem, and in both cases, it's because you upgraded the operating system. Your platform has a powerful processor and plenty of RAM, but to keep the price too low that you paid, the monitor is not designed for high end games. When you try to play high end games, your platform can not handle.

  It is difficult to find top Linux games of range, so if your fan runs at 100% Linux, you have a software problem (although it will probably not be hurt anything). When you upgraded to Vista or 7 (depending on where your machine was manufactured) you lost your drivers. All the new drivers that download you are not designed for your equipment.

  There are some things you can do:

  (1) simply to raise the two upper corners will lower your temperature around 10F.

  (2) use compressed air to blow carefully into the exit event.

  (3) it will not cost much to have a repair shop to install a more powerful fan.

• Windows 7 running slow will be upgraded to windows 10 clear of problems

  I am running windows 7 Professional 64-bit, but it raised a number of questions and is slow.

  The standard way to solve this would be to do a clean reinstall.  If I want to upgrade to Windows professional 10 this will have the same effect, or I have to re - install Windows 7 first before the upgrade.

  Also, on my second computer I am also running P 7 Professional but the 32 bit version.  Can I download the Windows Professional 64-bit for this machine 10 and doing a full install instead of upgrade Windows 7 32-bit to 32-bit Windows 10.

  Doing one in put place at level will not solve your performance problems. In fact, this could worsen.

  You can perform a clean when install upgrade to Windows 10:

  

  Click option to change what to keep

  Do not select anything

  Click Next

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

  You can try to solve your problems of performance of Windows 7 by using the following tips:

  How to speed up your Windows 7 system:

  http://techingiteasy.WordPress.com/2010/01/11/speed-up-your-system-for-the-new-year/

  In regards to your second computer, yes you can, see instructions how to:

  How to: switch from 32-bit versions of Windows to Windows 10 64-bit

• MX410 slow scan after upgrade to Windows 10

  After upgrading to W10 W7 scan on my MX410 became slow and jerky. I've uninstalled and reinstalled the software and have updated the drivers.  My impression works very well.

  Hello.

  This problem occurs when you scan with another program or MP Navigator?

  Also, try to reduce the DPI selection to see if that helps.

  If you continue to have difficulties, find more help contact us.