Fans Pro 6

I bought a pimp-up Pro 6, and the fans are running in the opposite direction: the air side pushes the hot air out of the CPU, and the rear fan is sucking cold air instead of extract hot air.

I'm not sure what the previous guy, but he is a very odd situation, never still in my years of material.

2 questions before starting to disassemble things:
is there a central place where the polarity or direction of the fans is controlled?
-is it possible the former owner having starts up again the fans, somehow remote?

Thanks for any help before "intervention."

New episodes... I think that the guy that installed it after that market components opposite the big fan on the back. I could not touch others, so I just reversed one. The CPU (in fact, the kozuti) and the other small fan in the back are not possible to disassemble without disassemble everything.
When I put it back together, I had a normal air flow and C - 15 on the CPU:
-now the air comes the side and the front and gets in the back
-the cpu is at 45 c in normal use
-the temperature of the system is at 60 ° C in normal use
-fan RPM exceeds rarely 960 RPM

I think that it is much more in line with normal behavior than before. :-)
Thanks for the tips, itsjasper!

Tags: Netgear

Similar Questions

  • Suddenly keyboard does not not, always on fans and pressing alt restarts the macbook pro 13 inch mid 2012

    So, I was on my macbook pro when I decided to close it out. Later, when I came back, I opened it and fans began to work hard, that I tried to enter my password, but the keyboard is not responding, so I plugged a keyboard external usb and I have finally started my session, but I noticed an X on my battery indicator and the message "no battery available.

    I have notticed that the ALT key on the MacBook pro keyboard, restarts the computer whenever you press it

    any idea of what disease? Key on the keyboard is not responding, Alt will restart the mac, fans of strong, cold material work, when I plug the charger in light barely there

    I tried disconecting the battery, reset the SMC and PRAM seems impossible due to the alt, restart problem

    Macboock pro 13 inch mid-2012

    SOS

    Have you tried booting in Safe Mode? If you can start check safe mode to see if the problems you described have stopped. If they are stopped, and then restart the computer normally. What happens then?

  • Upgrade of the fans on MacBook Pro 2014 retina

    Hi, can the fans inside the Macbook Pro upgrade 2014? I game on my mac and also to use some applications requiring a power of good treatment. These are the heat of my laptop a lot and therefore uncomfortable to lay my hands on. I wanted to improve the cooling on my mac.

    There is no way to upgrade the fans.  If you were to replace the fans it would be exactly the same unit.

    If you run games or applications processor it will warm up.

    Different machines have different processors, different graphics cards, all soldered to logic board - not upgradable - point-of-sale only.  This can make a difference in how hot they are.

    Some machines a discreet and Integrated GPU, some only a single graphics card.

    In addition to third-party fan contol the only applications user would be to try to reset the SMC http://support.apple.com/kb/ht3964 to see if there is a difference.

  • MacBook Pro Fan not working

    I have a mid-2014 13 "MacBook Pro retina and El Capitan running - my fan has stopped working and it gets very hot. It just started today. I noticed, that he had been getting hot in the last months, especially if I watched the video on a browser in addition to Safari, but the fan is still come to cool. This is not the case now.

    I did a SMC reset. Someone at - it any other suggestions?

    Thank you!

    You could try The Apple Hardware Test.  You should probably take the MBP at home.

  • Installation of SSD drive and the noise of the fan to the MacBook Pro?

    Hello

    Just replaced the stock 5400 RPM HARD drive in my MacBook Pro mid-2012 with an SSD 480 GB Sandisk and now the fan makes a loud noise. Sounds like it's revving at full speed. Does anyone know how to fix this?

    Thank you.

    You can try Macs with Intel processors: System management controller (SMC) reset and see if that fixes the problem. Unless you make a mistake in the reassembly, the two should be independent. On the other hand, it could be something in the design of the SSD. Personally, I would like to replace it with an OWC or OCZ.

    To check if the two are somehow connected try to replace the old HDD to see if the fan slows down. If it then reinstalls the SSD, making attention to do correctly and re - test. See how to install the ribbon cable short connecting the drive to the motherboard. It's easy to get the pins on the misaligned ribbon cable.

  • The cooling fans how are 13 '' MacBook Pro 2015/16 retina?

    Hello

    Sometimes, my mac make noise with its cooling fans, I tried to use some software for the diagnosis and is surprised that a single cooling fan has been detected. Could you please clarify how cooling fans are in my mac?

    My mac is:

    MacBook Pro (retina, 13 inches, early 2015)

    2.7 GHz Intel Core i5 processor

    8 GB 1867 MHz DDR3 memory

    Graphics Intel Graphics Iris 6100 1536 MB

    Serial number C0 * VH5

    Thank you in advance,

    Maksim

    < personal information under the direction of the host >

    This model has a fan

  • make all 2009 macbook pro have a fan

    Do all the macbook pro have a fan

    Yes and most have two fans.

    Ciao.

  • MacBook pro fans

    I have problems with my macbook pro heater. I downloaded an app on the app store, which gives me the internal temperature of the motherboard and the battery.

    the battery temperature is read correctly, but the motherboard temp is reading 32 degrees fahrenheit.  I am abroad and cannot get to a store mac until November. SO my question is, is it possible to manually get fans on (more timed not ONLY) via an apple store app or trusted third party app that you are aware of until I can get this problem looked at.  I work with a 2012 end retina pro macbook 13-inch.   Thank you.

    OS X El Capitan has introduced significant changes and rigorous in what apps can and can not extract the system. Accordingly, most temperature utilities do NOT work correctly or have NOT been updated for compatibility on model. Their reading is incorrect. The only utility I found so far to be up-to-date and give you access to the plethora of sensors is Menus Bjango iStat. Not free, but they give you a trial period of 15 days.

    Regarding the temperature of the room, my CPU cores and the GPU are run to 135F, 98F battery and fans move at about 2500 RPM. When the Mac is quite cool, the minimum speed is 1990 RPM. This is entirely consistent with how it should work.  It's a Mid-2015 15 "MBP retina. Your Council of 32F temp (freezing point of water) may not be correct.

    I suggest download iStat and run in its trial period so that you get the correct data. And let the cool Mac himself without help. As long as the side and rear vents are not clogged, it does a very good job to control its internal time. You worry if it reaches or exceeds 100 ° C/212F on the CPU as the threshold after which it stops as a measure of protection. At that time there fans will scream at their speed of 6000 RPM max.

  • Satellite Pro R850-15F - freezing randomly and the fan speeds up

    Hello

    I have a Toshiba Satellite Pro R850-15F who gave me four years in refurbished condition and so it is quite old.
    I have recently installed Windows 10 and things seemed to work very well.

    However, last week, I noticed that at least once a day my laptop freezes randomly and immediately the internal fan accelerates, becomes much stronger and a cold air. Whenever this happens, I turned off the laptop and turn it back on it.

    After that, it works normally again until the next time it freezes. I don't know anything about computer hardware, but I suspect that it is a problem of series and I wanted to get some advice in case my laptop is close to dying.

    If anyone has any help or advice or suggestions to solve the problem, then I would be extremely grateful if you would contact me.

    Hope to hear from someone soon,

    Flashback

    On this virtual path, it is not easy to say what the problem is here. To me, it looks like problem with some background process that as a result of extremely high CPU usage that locks the phone whole.
    High CPU usage means more heat in such situation the fan starts to run a lot faster.

    Have you noticed this behavior with a specific action or the use of certain applications?

  • How to regulate the speed of the fan on Satellite Pro L650 - 15 c?

    I can regulate the speed of the fan in my laptop (Satellite Pro L650 - 15 c)?

    The reinstallation of Windows 7 the fan is always moving up. How can I set this fan?

    greeting of the developing countries

    Hello

    Open windows power management and settings for the management of the power supply you use. You will find the advanced power option. Open it and you will find Toshiba power saver options.

    Open all the available option and check the settings of the cooling method. Set to optimized battery option.
    This should reduce the speed of the cooling fan.

    Please test and validate the results.

  • Noisy fans of satellite Pro A300D-151

    Hello

    I have a year old Satellite Pro A300D-151 which make a lot of noise compared to other computers.
    When I bought the computer he had 32-bit vista, but since I installed windows 7 64-bit on it.

    Sounds of noise like a fan work, but the computer is not hot, and you put your hand in front of the fan air outlet, you do not feel the air coming out. Anyway is to know what causes this problem and fix it?

    Please, all the answers are appreciated

    Try it please set the method to the minimum level of cooling. Laptop runs much more silent than before.

    Power settings > for power plan used to go to change the power plan settings > change advanced power settings > Toshiba saving settings > cooling method.

  • Question about the use of the Satellite Pro A60 fan

    Hello

    I intend to get a Satellite Pro A60 and I was wondering how much the fan turns on.

    Could someone comment if the fan turns on when the machine is totally inactive, and how he lights up when the machine is used for word processing and surfing the web?

    For example, when using normally does the fan turn on 1/10th of the time, or 1/2 time etc.?

    Thanks in advance,
    Pete.

    Hello

    Sorry I can't give you specific information about the cooling fan. A60 is known to me. It's a very nice laptop. Cooling vent is in reverse I am a pretty that there is no background noise.

    If you make the decision to buy it, look at what the capacity of the HARD drive is too high and that the DVD-ROM can burn a lot of different formats (DVD Super Multi drive).

    Have lots of fun with it.

  • Satellite Pro M30 - how to remove dust from fan

    I have a model satellite Pro M30 about 5 years.
    It seems to run hot and the fan seems to work a lot in the background.

    I was told to clean the dust around the fan, it's a big job.
    According to me, that there are a lot of screws on the bottom.

    Can help a whole based on do it myself

    Hello

    You do not need to disassemble the laptop.

    You can remove the dust and debris using a jet of compressed air.
    These aerosols can be purchased from the local computer or online dealers.

    I do from time to time to make sure that my laptop would not overheat and guess what; It is useful!

    Check it out.

    Welcome them

  • Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

    Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
    After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

    I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

    Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

    See you soon

    Edgard

    Hello

    It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
    Why the table fan has been changed?

    Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
    This helps to prevent the equipment from damage!

    Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
    The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
    But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

    If you want to reverse the BIOS, you will need to contact the ASP in your country!

    Sorry, but all I can suggest.

    Best regards

  • Satellite Pro P200-15W: update according to BIOS 1.9 fans walk all the time

    I have a Satellite Pro P200-15W. After recently running the BIOS update to version 1.9, the fans started running all the time and are extremely loud. Also, he did weird things for Firefox, Thunderbird and NAV.

    I would like to "Uninstall" the update of the BIOS if possible. I found [this link: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1080 89xml & sliceId = & dialogid = 24408215 & stateId = 0% 200% 202 4406262] who treats the restore running CD.

    If I run this CD, which will certainly restore the BIOS to the previous version?

    Is there a less destructive way (ie: that does not erase the hard drive)?

    Thank you

    Ben

    Post edited by: cannboys

    Hello

    It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
    Why the table fan has been changed?

    Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
    This helps to prevent the equipment from damage!

    > would like to "Uninstall" the update of the BIOS if possible. I found this link that explains the running restore CD. If I run this CD, which will certainly restore the BIOS to the previous version?
    > Is there a less destructive way (ie: that does not erase the hard drive)?

    Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive. The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
    But you can try to recover the laptop to see if you can solve the problems of software!

    If you want to reverse the BIOS, you will need to contact the ASP in your country!

    Sorry, but all I can suggest.

    Best regards

Maybe you are looking for