Fast debugging messages formula appears DO NOT

Similar Questions

• Contacts not appearing is not in messages

  Hey,.

  I just got the iPhone 7 more (iOS 10.0.1) and I have a 42mm stainless steel with watch OS 3.0 Apple Watch.

  Since yesterday, when I get the text message/imessages the watch does not appear the name of the contact, just the phone number. On my iPhone, it appears with the name, as always.

  I tried to restart my watch and my iPhone, but it did not help. I also tried resets hard on both devices, no luck.

  My wife has an iPhone 7 and Apple Watch Sport and she has the same problem.

  We did not see this problem when we had our iPhone 6s and 6 s more on iOS 10.

  The battery seems to also take a lot faster the last two days, since getting the iPhone 7 more.

  If anyone has the same problem with contacts not appearing is not in the posts about Apple Watch and found a solution, I would like to hear about it.

  Thank you

  Hi Klaus21,

  Looks like you are unable to see the name of your contacts on your Apple Watch even after its restart, but your phone shows it is very good. I would then say that disable you pairing the watch to your phone with this article:

  Cancel the match your iPhone and Apple Watch

  Then reboot the phone and pair them up again:

  Set up your Apple Watch

  Thank you for using communities of Apple Support.

• If I click on a message in the message list, they do not appear in the message board

  When I single-click a Message in the message list, it was posted in the message board in the list.
  Since the installation of the latest version, 24.5.0 is not it more. It will display the message that after a double click and then appears in a separate pane. After that, when I close the pane, the message also appears in the messages pane.

  Try restarting with the modules disabled in the Help menu. These things are often bad interactions with the Add-ons.

• I use iMessage to the text of my Macbook. For some reason, it will not let me send a text message to a particular group (everyone has iMessage/iPhones) to my computer, but works well on my iPhone. All messages always appear on my Macbook iMessa

  I use iMessage to the text of my Macbook. For some reason, it will not let me send a text message to a particular group (everyone has iMessage/iPhones) to my computer, but works well on my iPhone. All messages always appear on my Macbook iMessage, but when I click in the conversation, no text box for me to write as he does with everyone. It's driving me crazy. How should I do? The two contacts are in my address book and identified on my computer but I can't their message from my computer and have to keep spending on my phone to text their return. Their new messages are always also highlighted on my computer. In the photo I've included, you can see there is no text box for the text of the group with "Franny, dad."

  

  Thanks for any help!

  What happens if you start a new conversation with Franny & Dad from the IOW computer do not try to "catch" the conversation

  Click on new message and put their names in there

  If this does not work - remove the wire from the Mac and try again

• At startup, there is a message that appears on my screen that says: "this copy of Windows is not genuine".

  At startup, there is a message that appears on my screen that says: "this copy of Windows is not genuine". Where can I find the product code for the program installed Windows from my computer?

  Original title: Windows

  Check on the side of the case, the bottom of the laptop, or the battery box.

  Try the phone activation, if this fails then download and run the diagnostic utiliy

  =================================================

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  =================================================

  Run the Microsoft Genuine Advantage Diagnostic tool:
  http://www.Microsoft.com/genuine/selfhelp/ServiceRequest.aspx
  Download the tool: http://go.microsoft.com/fwlink/?linkid=56062
  Post your results (copy button) and paste your results into your answer.

  J W Stuart: http://www.pagestart.com

• Messages appear is not on the Console in the form of Custom window

  @@We has created a custom form with the name of the window: XXACCOUNTDESC

  Form module: XXACCOUNTDESC

  Subclass: Module

  Console Window: PROGRESS_INDICATOR.

  during the compilation of the form, we get the error message with

  FRM-18108 could not load the following items.

  Source Module: APPSTAND

  Source object: STANDARD_PC_AND_VA

  Source Module: APPSTAND

  Source object: STANDARD_TOOLBAR

  Source Module: APPSTAND

  Source object: STANDARD_CALENDAR

  Even if we get this error. Form is created successfully and we can open the form for application front-ends.

  Everything works fine but it does not display a message on the console at the bottom of the form window.

  Please let me know what I missed.

  Thanks /.

  User526853 wrote:

  ... I have another question. I wanted to hide the error message standard oracle on the form and show the custom for this message I put: SYSTEM. MESSAGE_LEVEL: = '25'...

  Do not delete the message using: SYSTEM. MESSAGE_LEVEL: = 25.  You might find yourself Gohan messages you want to display, and more that only works for messages that have a lower priority or level of 25.  Any greater than 25 message always appears.  It's much better to intercept the error message / in the trigger-Error or one Message only to remove the error.

  You should be able to intercept the message in the On-Error trigger.  Simply add the code to test the exception DUP_VAL_ON_INDEX (ORA-00001) and display your message elsewhere, let BSE standard Error Handler take care of all other errors.  Your code should look like this:

  /* Sample On-Error Trigger */
  -- Code is untested...
  BEGIN
     IF ( DBMS_ERROR_CODE = -1 ) THEN
         -- Display your message here
     ELSE
         -- Call the standard EBS Error Handler
     END IF;
   END;
  

  Craig...

• Deparquement cloud installation I get the message which appears "failed to start CoreSync could not create/Library/Application Support / Adobe / CoreSync ' on an iMac with OSX Yosemite 10.10.3. The finalization of installation not its actually not. C

  Deparquement cloud installation I get the message which appears "failed to start CoreSync could not create/Library/Application Support / Adobe / CoreSync ' on an iMac with OSX Yosemite 10.10.3. The finalization of installation not its actually not. How do I?

  Brandon,

  Please adjust the permissions of the user on this issue: activation and using the user 'root' on OS X - Apple support

  You can also find details on how to adjust the permissions of file to error 'Output 6' or ' exit 7 "|"» Install log | Read, write, file system errors. CS5, CS5.5.

  See also:

  https://forums.Adobe.com/thread/1714050

  https://forums.Adobe.com/thread/1828087

  Guinot

• I bought from amazon lightroom 6 and I have win7 pro 64-bit and during the installation message appears OS not not met requirment win VISTA NOT supported

  I bought from amazon lightroom 6 and I have win7 pro 64-bit and during the installation message appears OS not not met requirment win VISTA NOT supported

  See the link below:

  https://forums.Adobe.com/thread/1836232

  The folder Lightroom 6.

  Right-click on Setup.exe and choose Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

• Tables: Must have text Message box appears if the totals do not agree

  I have a table that has six columns of figures. Each column is reached. I would get a text box ("these totals must agree") to appear IF (column mouse + column Rats) is NOT equal to (column B column C + column D + column E.)

  I didn't need calculate the sum of the totals of columns, that is to say, no need to know the total of mice and rats, etc.. I just have to make sure that the number of rats and mice is equal the number of category B, C, D and E pets. And to let the form user know.

  I hope that makes sense!

  Thank you!

  There are two ways to handle this.  Normally validation of this type is made when the user has finished the form and is ready to submit.  This is because in this case, validation is based on several columns and rows, so if you wanted a pop-up for the error message box, they would get a message popping up every time a number is entered until all columns are added correctly.

  It looks not to form any kind of function submit, so I got stabbed another angle.  I've added a message that is a note and a warning below the list of categories.  This is normally visible and is hidden when the columns add up correctly.  I added the validation code in the event of page layout: ready for JustifyE since it was already used another script and it fires when you need it.

  Update form is attached.

• Error message "a program could not start. Please try again"when I try to send Remote Assistance invitation.

  original title: Remote Assistance does not work

  Win XP PRO SP3

  Question #1:

  When you try to send an invitation to support remote I get an error message "a program could not start. Please try again. »

  This error pops up before even the invitation is created, so the problem is with the creation of the invitation and not with problems of subsequent connection between the computers. The invitation is never created. This happens on several computers I own or maintain.

  The event log records all errors when this happens.

  I searched for hours all over the Internet and a lot of people seem to have this problem. Some it is resolved, for the most part, they needed to start a service, but the cause of their problem is not the same as mine.

  After restarting the computer, sometimes the invitation creation works fine.

  Other DIY suggests when the problem appears it can be corrected by running the command 'sessmgr-service' in a command line window. After executing this line it seems that the problem is resolved.

  What I find disconcerting is that Sessmgr.exe is the service Remote Desktop Help Session Manager that was already running, but for some unknown reason runs this line made work again right. I'll have to experiment more.

  Is it possible to debug and fix this?

  Question #2:

  When I can finally send an invitation it will work on the local network but not on the Internet. I can't connect to the Internet.

  I'm looking at the structure and the content of the invitation to http://msdn.microsoft.com/en-us/library/cc240167(v=prot.10).aspx
  In the example given here, as in the generated invitations in my experiences, the invitation contains only the LAN IP addresses (with port number) but no global address.
  RCTICKET =... 192.168.1.65:3389; Jeff: 3389

  How the computer expert is supposed to understand the global address to which it should connect is a mystery to me.

  How can I get Remote Assistance to work on the Internet?

  Hello

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• ACL SA IPSEC debugging message

  Hello

  I'm currently setting up a site VPN tunnel site between a PIX 515e and a customer Cisco Concentrator VPN 3000 series.

  I configured all ISAKMP policies and rules in IPSEC. These should allow IP between two specific devices on ACL mirrored.

  However, when IP ping from my PC source through the PIX at the end of the customer, the following IPSEC debugging message appears on the PIX.

  IPSec (sa_initiate): ACL = deny; No its created

  IPSec (sa_initiate): ACL = deny; No its created

  I have checked my acl and see no reason why this should prevent the IPSEC tunnel to initiate.

  Anyone know which also relates this message? As I am unable to find something specific on cisco.com

  I know the problem is somewhere on the PIX, VPN concentrator sees nothing happening in the live journal.

  I'd appreciate anyone's help.

  Thank you very much

  Neil

  Hey Neil.

  I searched all open/closed cases of TAC and received some information that may help you.

  Here are the most likely outcomes that have solved problems of other clients:

  (1) PFS turn PIX configuration for this tunnel as the hub is not uses PFS

  (2) restart the Pix or using cryptography clear command of his

  (3) change the ACLs all at more specific source/destination pairs.

  (4) ensuring the allowed sysopt of ipsec is enabled

  (5) double card check no. Nat ACLs and ACL crypto

  I think that #1 may be the most likely cause. You have probably already done #2. #3 & #5 that you should check on because this might be possible, but it might already be correct. #4 is probably not the cause, since you don't see any activity on the hub.

  Let know us if none of these help and I'll look into other cases more deeply.

  Hope this helps,

  Peter

• Missing message window mail and not coming back

  I searched and searched, but can not solve my problem. I accidentally locked my window message in mail - I caught the bar in display classic and smashed down. I want my BACK window, but he refuses to appear. I tried in classic and new points of view. I get the arrow - the one with the line and pointing up when I hover over the divider bar, but it does absolutely nothing. I found a thread on the removal of certain folders in libraries and reboot, nothing helps. Now, I'm looking for an alternative application. El Capitan 10.11.5, 27 "iMac

  

  Hello Melissa,

  Thank you for using communities Support from Apple. I know have a problem with the appearance of your mail, it's not what you expect. As I understand it, you can't recover the messages view in Mail after dragging the separator bar all the way to hide the display of messages, and today shows only your message lists. Your screenshot really helped to visualize your question, and good news is that I was able to replicate and solve the problem with the following steps:

  1. go in Mail Mail > Preferences > display and check the box for the classic configuration to use.

  Preferences - help Mail display

  2 close the Mail preferences window. Then click on the bar of separation of the messages at the bottom, as you point your screenshot.

  3. drag the splitter bar to halfway to the top of the screen and hold it there for a few seconds and release the click of the mouse until the messages view appears to the top. You will have to perhaps move the separator bar and go down a bit to get the message of pop display.

  Read messages - help Mail

  See you soon!

• How to remove the messages that appear in a search list?

  I used the search function at the top of the window of Thunderbird for a particular recipient. I want to delete some of the messages that appear in the list, but seem not to be able to do.

  Hi Todd. Who has had. Thank you.

• How to fix: after upgrade to 31.1, using the list of group name does not, gives the messages this name "is not a valid email address."

  Before the upgrade, I often type in the group alias in the address box, and fills the name of the group. But now when I try to send the message, I get an error that the name that appears "is not a valid email address" and then details how to train the appropriate addresses.

  I deleted the list of my address book personal and recreated to address in my CAP, but the error persists. I have to manually add individual addresses.

  I tried selecting the group from the list in the Contacts pane instead of typing the alias, no change.

  I'm doing something wrong?

  -Mike

  I have new information on this subject.

  It looks like this bug. If you have a Bugzilla account, it would be useful to vote for this issue.

  It seems that lists with a description that includes several words have this problem. The bug report suggests to replace whites "" between the words in the descriptions of these lists with an underscore "_".

  If you don't want to change your descriptions, the other workaround provided still works.

• When I type in 'write' address or message, nothing appears

  Trying to write a new message and enter the data from the keyboard, nothing is displayed in 'a' or 'subject' or in the body of the message. Keyboard does not work normally. This problem suddenly appeared for the first time.

  If you restart with modules disabled in the Help menu (Alt + H) you see this again?