Tables: Must have text Message box appears if the totals do not agree
I have a table that has six columns of figures. Each column is reached. I would get a text box ("these totals must agree") to appear IF (column mouse + column Rats) is NOT equal to (column B column C + column D + column E.)
I didn't need calculate the sum of the totals of columns, that is to say, no need to know the total of mice and rats, etc.. I just have to make sure that the number of rats and mice is equal the number of category B, C, D and E pets. And to let the form user know.
I hope that makes sense!
Thank you!
There are two ways to handle this. Normally validation of this type is made when the user has finished the form and is ready to submit. This is because in this case, validation is based on several columns and rows, so if you wanted a pop-up for the error message box, they would get a message popping up every time a number is entered until all columns are added correctly.
It looks not to form any kind of function submit, so I got stabbed another angle. I've added a message that is a note and a warning below the list of categories. This is normally visible and is hidden when the columns add up correctly. I added the validation code in the event of page layout: ready for JustifyE since it was already used another script and it fires when you need it.
Update form is attached.
Tags: Adobe LiveCycle
Similar Questions
-
whenever I start my computer a box appears in the middle of my screen with the title identify yourself and the message user name and password do not match (you provided xxxxxxxxxxxx).
I would like to know how I canremove this message appear each time I start my computer?
Hello
1. have you made changes on the computer before this problem?
2. What is the version of the operating system that you are using?I suggest that you try following the steps mentioned below, that if you use Windows Vista and Windows 7 and check to see if it helps.
Step 1: Check in SafeMode with network.
You can also check if the problem persists in safe mode with network and check.
Reference:
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
If you are able to see the start icon, then executes the method 2.
Step 2: Perform a clean boot and check.
To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: After troubleshooting, be sure to start your computer in normal mode by following step 7.
Hope the above information is helpful.
-
How can I keep my text messages to appear on the iPhone to my daughter
I added the new iPhone of my daughter to my Apple ID and now she sees all my text messages. How can I fix it?
Get his own AppleID to use.
-
Hi, while writing an email online using Firefox 3.6.3, I was using one of the "CTRL + left arrow or right" to move the cursor on the text. I must have pressed some other key because the screen has become huge - and I can't scroll vertically or horizontally, which makes the pages of Mail of Hotmail impossible. I have connected since using the Explorer MSFT and it works very well. This problem occurs only on the page of Mail of Hotmail Live not on the home page or other.
Could you please let me know if there is a problem with Firefox, or if you have any advice on how to restore the appearance of Hotmail in Firefox?This has happened
Just once or twice
== I'm compiling an email in Hotmail Live
-
Ideas:
- Programs you arecan someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of files violeted the problems with
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
bastyav,
We use the exact and some error message in more detail on the issue. This problem occurs with any file on the disk or only some of them? You are logged as administrator? Has anything changed recently (hardware or software)?The first thing I would say to run a Virus scan and malware. If you do not have an antivirus program, then you can get one here: http://www.microsoft.com/Security_essentials/
If there are no problems found then not try the following steps:
Run the following commands.Chkdsk /r
http://support.Microsoft.com/kb/315265
sfc/scannow
http://support.Microsoft.com/kb/310747
Let us know the results and the information requested.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Lost my icon to send new messages in mail (appears in the toolbar, but not active). Can not send a new message in the mailbox (impossible to select) drop. I tried to use the toolbar Customize to drag an icon to the toolbar, but it doesn't work anymore. Using Mail 9.2 and OS X 10.11.2. Any help is appreciated.
The Send button will not be activated unless the message can be sent. Are you sure that you have entered a recipient and the account is online?
The connection doctor (window menu) displays errors.
-
When you are working in photoshop, a message box appears telling me I need to delete my "scratch disk". What is this and how can I do this?
Look in photoshop preferences
-
When I opened the Hotmail emails a message box appears that I can't get rid of
When I opened the Hotmail emails a message box appears which says: this page is accessing ifformation which is not under its control. It is a security risk. -What this means and how do I get rid of him?
View all Windows Live and Hotmail questions in the appropriate forum found here:
http://windowslivehelp.com/ -
In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). Whenever I try to use a tool, a blue box appears around the line and I have to double click on it to handle, which opens just this line in a screen finery semi where all other objects are semi-gris in the background. I can handle this line in this screen, but nothing else at this point I could do 5 minutes ago. For example, I can no longer reach the 2 lines drawn by the tool online together. For some reason, it started randomly (probably due to an accidental combination) and I just can't put it to what it was. I inserted a video showing if all goes well I mean. Any help would be appreciated.
Object drawing mode. Simply disable it in the tools Panel, or by using the default keyboard shortcut, which is J.
-
As I try to start my computor, any dialog box appears on the screen are covered in "'
As I try to launch my putor, any dialog box appears on the screen are covered in "' so I can't put passwords or addresses of sites and if the sound is on a morse codes like noise appears with the comma... I have done all the analysis and attach it to Microsoft but do I have a virus and how do I find? thxs
.. .all dialog box appears on screen is covered in "' so I can't put passwords or addresses of sites and if the sound is on a morse codes like noise appears with the comma...
The character you are evidence is a single quotation mark or tick rather than a comma, but the character you see in reality is probably an asterisk in a mask the password text box. In both cases, the problem remains the same.
You have a key stuck on your keyboard which instantly fills any box entry with the typed characters, they are ticks or asterisks. The only audible ringer is a normal computer error indicating that the keyboard buffer is full, but entry continues, once again an indication of a stuck keyboard key.
Try another keyboard. It may be possible to launch a key by a sharp tap, but the problem will probably persist in the future. I hope that you don't talk about your laptop.
-
whenever I start my windows, the dialog box appears with the words "persistence module a work stoppage" how to fix this problem? someone help me please tell how to fix
Hello
1. have there been recent changes to the computer before the show?
I suggest you to try the steps below and check if it helps.
Method 1: Start your system in safe mode and check if the same problem occurs.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Hope this information is useful.
-
Hello!
A few weeks, I just change my signature to email hotmail via the menu options, and since then, a big grey box appears on the emails that extends from left to right and is also important. I went into the signing options, re-created the signature, and for 3 weeks completely removed the signature, but I always get the grey box display. Email being accessible via www.hotmail.com, and I don't have the problem, when I answer emails via my iPad2.
Any help will be greatly appreciated, so that e-mail can be sent to the search normally. Thank you!
Hi Paul,.
The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
http://windowslivehelp.com/product.aspx?ProductID=2 -
I need help to remove Adobe Acrobat. I got the free trial version, and it has expired. I thought I deleted the program, but I get this message "before you proceed you must first launch Adobe Acrobat and accept the end user license agreement." I thought I deleted the program, so I can't seem to be able to throw. I have a MacBook Pro OS x help, please.
This message comes from Adobe Reader; Launch the Reader application and accept the EULA.
-
Dialog boxes appear off the screen
Hello, I have problems with dialog boxes in Illustrator CS6.
Dialog boxes are appearing in various different locations rather than a central location on the screen...
For example: the Save dialog box appears half off the screen towards the lower right section of the screen. Various other boxes appear at the top left, top right. All dialogs are mobile, so I can reposition in the Middle, but the next time I used appear where they were not at the Center.
I work on both a 13 "macook pro separately and with and 27" apple screen attached. Dialog boxes are visiable on 27 "screen, but often in odd places.
Is there a way I can reset their position?
I tried reseting all the dialogues, trashed the preferences in the preferences in the folder of the library on the computer but no luck. I'm puzzled.
Any help would be appreciated...
Thank you
nosbornf,
It is important that Illy is closed when you reset the preferences.
Try the following (you may have tried / some of them already) and see if it helps:
(1) close Illy and open again.
(2) restart the computer;
(3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift at startup.
4) move the folder with Illy closed;
(5) browse and try the relevant among other options;
Even worse, you can (if all else fails and no best answer appears):
(6) uninstall, run the cleanup tool and reinstall.
-
Text blocks all appear in the tab order?
It is a recent thing, I noticed. I have imported a Word document, and all non-fillable text blocks are appearing in the tab order. Is there a way to tell LS to include only the user interactive fields in the tab order?
Curiously, when I preview the form, the tabs stop only in the fields, so it runs very well on the end of the user. It's mostly just a gene of design because when you configure the tabs, there are so many blocks of text that I have to work around.
Screenshot below.
JO
Hi Jo,.
Just for your information. Have you checked if you did the next thing?
Tools-> Options-> tab order-> and select Show only tab order for fields.
Thank you
Sidonie.
Maybe you are looking for
-
Activation of pen on TouchSmart
Hello I recently got a Touchsmart all-in-One of envy; It is a great machine and so good, everything is fine. Touch of 10 points is really cool, but there are many cases when I would be able to use a pen to be more precise in my score or "mark" a docu
-
BlackBerry smartphones can not update PRIV Marshmallow
Hello I received a notification of system update and downloaded. After tapping 'Install the update', the system tried to put it off, but he could not (she repeated "Switch off" and he hung up on it). After waiting a few minutes, I long pressed the po
-
BlackBerry Smartphones wireless
I use my BB lamp in a variety of WiFi hotspots with success. However, a month ago, the BB cannot use my home wireless system. It shows that it is connected but cannot access all sites. I disable my wireless home on the BB and I can easily access t
-
To subscribe to several areas with a form?
Hey, legends,I have a client who sells access to the secure area of different themes of business studies.They have several products / secure areas and so far, they have a page of product purchase.Did somebody found a way to subscribe a user to multip
-
HelloI have an employee who changed his name due to marriage we have renamed the AD object to the new name. But now if we are looking for the new entry its show up, but if we grant permission for the user's displayed with the old name and the user ca