Fatal error at startup in FSX

Similar Questions

• Fatal error on vista, is not without failure or any other function, will not help scannow in command prompt!

  I have a compaq presario desktop with windows vista, today he gave me a fatal error on startup and the blue screen of death... horror!  I tried the system restore, it says I have no restore points, I tried to start in safe mode, it stops just after running through a list of all the drivers.  I put in the original disc and has managed to enter the prompt orders and chkdsk, which doesn't give me any options.  Tried running sfc scannow, he says: it cannot perform this function.  Help!  Does anyone have any ideas how can I fix?  Of course, I'm a fool and have some pictures and other things on the hard disk that are not recorded on a disc.  I thought I could go in safe mode and save my files but it stops just when I try to go into safe mode.   Everything and I mean ANY help would be much appreciated.

  Thank you!!

  Shoot Hd, put it in a USB enclosure, get on another computer and if the HD is not dead presto.

• Win 7 64 bits + FSX = 'Fatal error' & CTD / reboot

  Hello

  Like many other people, I get this error message, and some fatal errors followed TCTC when in FSX, to the point that I have almost all but given to the top to never play FSX.

  "This feature requires that {smartassembly} is available on this computer.

  I looked on all the forums, including this constructive info one, but none that has helped me so far. I tried to reinstall windows & FSX 5 times the last two days, tried the fix c:\windows\system32\uiautomationcore.dll., closure of the various windows services at startup, usually following the adivce in another Win7 + FSX forums here.  Nothing works.

  The CTD occur in flight, but also after a start to the gates where I leave the plane for a few hours, I will return to find FSX has restarted itself.

  I run FSX on Win 7 64 bit, which, through various forums, gives people a lot of problems (CTD) with FSX. It seems that this is a common problem, so I hope you can help solve this problem. So far, I (and many others) cannot use their FSX + addons which we have invested a lot of money in.

  Please let me know, the more information you need, but pls don't tell me to reinstall Windows & FSX once more. I did it 5 times in the last two days, is not what is causing FSX to malfuntion.
  Thanks in advance.

  BR

  Robert.

  I found this information on another forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/fb1808ff-92f0-478b-9826-f2ed6fbeae97

  IT WORKED FOR ME! I just deleted the c:\windows\system32\uiautomationcore.dll (after saving). Problem solved! It's fantastic! Has made a whole flight from Changi to Frankfurt using the menu strongly and there is no problem!

  gkair2

   
   THE BOTTOM LINE WHICH IS THE UIAUTOMATIONCORE. DLL FILE CAUSES OTHER DLL FILES MALFUNCTION!

  A lot of people, I have the fix -after a whole year of fussing and spend $600 on all versions of windows out there-XP 32-bit stinky. Proffessional XP 64, vista HP32, vista 64 HP, Win 7 RC 32 & 64, Win 7 32 business and Win 7 64 bit Professional (my main OS of FSX on which I made the success of difficulty). As simple as it sounds, it works. I tried to replace the file c:\windows\system32\uiautomationcore.dll and FSX would still be well down after a while. And if it wasn't this dll file, it would become another file such as ntdll. So I tried completely delete the file of 32 times the syswow64 folders and system c:\windows\system32\uiautomationcore.dll. Now, I play with the graphics settings and set to custom traffic and turned up completely while I aircraft FSX, landscapes and weather parameters turned to ultra high and no crashes for two days! I can click in and out of any menu such as map or the virtual flight path change full flight plane or change full weather flight with without crashing. I tried every way to get FSX down and I can't do it!

  FSX is really great when it works.

  Here IS THE SOLUTION: You may need to take ownership of the files if windows prevents you to delete the file. Open the prompt cmd and do a right-click to run as administrator, and then type in exactly below its replacement by your login name from windows where it says username:

  takeown /f C:\Windows\System32\uiautomationcore.dll

  cacls C:\Windows\System32\uiautomationcore.dll/g username:F

  takeown /f C:\Windows\Syswow64\uiautomationcore.dll

  cacls C:\Windows\Syswow64\uiautomationcore.dll/g username:F

  Now you can only access your system32 and syswow64 folders in windows Explorer and after saving files C:\windows\system32\uiautomationcore.dll just remove them from your computer. (Don't forget to delete the file Uiatomationcore.dll in the folder FSX ure also if you install as the fix in other posts).

  If you download their latest driver Nvidia cards also. Its got a huge performance increase. The only problem I've had by deleting the C:\windows\system32\uiautomationcore.dll file is that if I get FSX completely while in the flight of my office windows becomes dysfunctional and I have to restart. If I first put end to the leak and then quit FSX I have no problem. I have four different OS on separate partitions on my computer built especially for FSX. There is no point playing FSX on all 32-bit versions of windows, because you will have more FS 2004 than FSX on a 32-bit system.

  Now, since I have 12 GB of RAM, dual of the 9800GT, intel core i7 920 clocked stock (suck cuz MSI MB for OC) and three 22 "monitors - rather than get 10 FPS (on my 32-bit windows 7) I get 25 FPS on my 64 bit Windows 7 with two windows of the virtual cockpit on two monitors and all my instruments on the 3rd monitor. BTW 6 GB (if you have three slots) or 8 GB Ram (if you have dual channel) with a 64 bit OS is a lot - I just find my DDR3 RAM to remove dirt cheap on Microcenter one year ago. 4 GB is not enough you will get OOM errors with parameters even rolled to halfway. Don't have need to buy fancy graphics cards is because FSX's time CPU and does not really do well on recent graphics cards. The 9800GT are very cheap at like $70. Also certainly upgrade to the core i7.

  Please spread the word to all our friends in fsx!

• FSX fatal error. (I think it's a BEX (branch Exception)) I tried searching everywhere and I can't make it work. I'm ready to give up!

  FSX has a fatal startup error. I tried reinstalling clean 3 times and the redone problem surface without fail. The problem started today, but after my reinstall FSX, I'm not sure a system restore will help.

  PC:

  Win 7 Professional

  8 GB RAM

  Processor i2600k

  Error in the report of the event viewer:

  The failing application name: fsx.exe, version: 10.0.61637.0, time stamp: 0x46fadb14

  The failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000

  Exception code: 0xc0000005

  Offset error: 0x00000010

  ID of the process failed: 0x1f88

  Start time of application vulnerabilities: 0x01cc36e99e7533ff

  The failing application path: E:\Microsoft Flight Simulator X\fsx.exe

  Path of the failing module: unknown

  Report ID: e0e181bb-a2dc-11e0-9af2-0026832bf68

  Error information :

  Fault bucket 107817089, type 5

  Event name: BEX

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: fsx.exe

  P2: 10.0.61637.0

  P3: 46fadb14

  P4: unknown

  P5: 0.0.0.0

  P6: 00000000

  P7: 00000010

  P8: c0000005

  P9: 00000008

  P10:

  Attached files:

  C:\Users\W\AppData\Roaming\Microsoft\FSX\fsx. CFG.txt

  C:\Users\W\AppData\Roaming\Microsoft\FSX\dxdiag.txt

  C:\Users\W\AppData\Roaming\Microsoft\FSX\scenery.cfg

  C:\Users\W\AppData\Roaming\Microsoft\FSX\fdr.dat

  C:\Users\W\AppData\Roaming\Microsoft\FSX\dll. XML

  C:\Users\W\AppData\Local\Temp\WER1D17.tmp.WERInternalMetadata.XML

  These files are available here:

  C:\Users\W\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_fsx.exe_c6395367382ce932b23bb886e4eea0406324b9bd_1ee958b0

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: e0e181bb-a2dc-11e0-9af2-0026832bf687

  State: 0

  XML

  -

  -

  1001

  4

  0

  0 x 80000000000000

  4112

  Application

  W PC

  -

  107817089

  5

  BEX

  Not available

  0

  FSX.exe

  10.0.61637.0

  46fadb14

  unknown

  0.0.0.0

  00000000

  00000010

  c0000005

  00000008

  C:\Users\W\AppData\Roaming\Microsoft\FSX\fsx. CFG.txt C:\Users\W\AppData\Roaming\Microsoft\FSX\dxdiag.txt C:\Users\W\AppData\Roaming\Microsoft\FSX\scenery.cfg C:\Users\W\AppData\Roaming\Microsoft\FSX\fdr.dat C:\Users\W\AppData\Roaming\Microsoft\FSX\dll.xml C:\Users\W\AppData\Local\Temp\WER1D17.tmp.WERInternalMetadata.xml

  C:\Users\W\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_fsx.exe_c6395367382ce932b23bb886e4eea0406324b9bd_1ee958b0

  0

  e0e181bb-A2DC-11e0-9AF2-0026832bf687

  0

   
  I tried:
  Reinstall complete
  Scannow
  Deletion of UIAutomationCore
  FSX. CFG HIGHMEM Fix
  Secure boot
  Setting virtual memory to 3072
  Memory virtual tuning system managed
   
  I am at my wits end and I'd really like a solution!
   
  Thanks in advance!

  Hi Fahimulla;

  I have the 'FSX 'Gold Edition' ' which is FSX (records 1 and 2) and acceleration.

  I tried the clean boot

  Registry cleaner

  I have searched the Internet for others like me and disabled the Dep. (this cause the BEX to become an error APPCRSH error).

  None of the above worked.

  The only thing that worked was to reinstall FSX in a directory that is:

  NOT in Program files (x 86)

  NOT the same name as the corrupted (earlier) version of FSX. (For example I got the defalut FSX gives the first installation. I then changed to the C:\FSX and I have the fatal error occur.

  I also use the 32-bit C:\windows\system32\uiautomationcore.dll in the FSX main folder (where the .exe is located) and I'm not having CTDs on using the menu while the Simulator works...

  While my problem may have been avoided, for now, I hope that something is done to address this recurring problem.

  Thank you very much for your help!

• FSX fatal error which makes this repair FSX?

  I was change one of my panel.cfg files and when restart FSX seen the fatal error message.  I've never used FSX fix before, what it repairs?

  that is, it removes my add on scenery and aircraft, t - it change my network settings or what?

  Thank you

  Hi Goldsworth,

  Please contact the Flight Simulator supported the use of the links for more information below.

  Solutions for the Flight Simulator Centre

  http://support.Microsoft.com/GP/cp_flightsim_master#tab1

  Microsoft Flight Simulator Web site

  http://www.Microsoft.com/games/fsinsider/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• A fatal error has occurred Message on FSX

  Hello

  When I play my game, the game suddenly crashes, then closes then this message comes saying "A Fatal error has occurred", and then restarts the game. Please give me a help about it. Thank you.

  Hi Lisa,

  You can check out the following link and try the suggested steps to fix the problem:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/Flight-Simulator-x-has-encountered-a-fatal-error/8a2a053e-8D64-45A7-80fb-f04558dda696

  Hope this information is useful.

• Fatal error for version Skype 6.18

  Hello everyone,

  I recently noticed (lika many other users) that older versions of Skype are no longer supported and cannot connect.

  So I decided to download and install the latest available version, only to receive a very strange error at startup: "unable to get the address of procedure for GetLogicalProcessorInformation (KERNEL32.dll).

  I have to admit that I use a very old PC spec: AMD Athlon XP2200 + with 1 GB of Ram and Windows XP SP2.

  Is there anything I could do to make it work again?

  Thank you!

  Gabriel.

  You need to update your installation of Windows XP Service Pack 3 (SP3).

  https://support.Skype.com/en/FAQ/FA12388/why-am-i-getting-a-fatal-error-KERNEL32-dll-when-i-try-to-l...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  However, your PC has an old processor (AMD Athlon XP2200 +), which has no support for SSE2 instruction set. With this processor, no version of Skype available allow the video on your PC.

  https://support.Skype.com/en/FAQ/FA12252/why-can-t-i-make-video-calls-on-the-latest-version-of-Skype...

• Re: Toshiba Power Saver fatal error. Code 0 x 0

  Hi all

  I recently received this new notebook Tecra M10 (model PTMB0A - 00M 001) replace my laptop to existing business. It came loaded with Windows XP and built by the standard portable computer generation.

  It works fine except that at startup I get the error message "a fatal error has occurred. The program will end. "Code: 0x0.

  I did some research and I think that the original version may have been compromised, because there aren't has no files in the directory C:\Program Toshiba Saver except for a TPSTrace.log that has this message inside: "a fatal error has occurred. The program will end. "Code: 0x0 rental: TPwrSave.cpp (140). The Power Saver software claims to be v7.11.00.

  I downloaded the latest version 7.11.10 (for XP) and when you try to install, the software asks you if it can uninstall the existing version and as it tries, the fatal error code: 0 x 0 occurs which always uninstall, and I suppose that reinstall it. It seems a pity to restore from CD lose all data and other software that is very good because of this software pooey to save energy. Given the original installation was probably standard, there is no guarantee that even if I do a system restore on CD the same problem not re - manifests.

  Is there a way I can do XP think software is deleted (it seems to be absent physically, but XP think it is present) by forcing an uninstall. I can then try to reinstall it to see if I can do better than what it was when it was delivered to me. Otherwise, I'd be more than happy to just work without it, for the trouble it causes.

  Thanks in advance.

  Raymond

  You must delete it from the registry.

  Try CCleaner first, it may be able to remove the bad registry for you keys. (google for "CCleaner")

  Otherwise, run Regedit, and then search for "to sleep". Make sure that you delete, in order to ensure the results refer to Toshiba Power Saver.

  PS. back up the registry first. You can do this by creating a Restore Point in Windows. (Panel of-> system)

• Win2k3 Server IIS SChannel event 36871 "a fatal error occurred when creating the SSL server credential information."

  To make a long story short, I went to use client software that I use a few times a week and it would not connect to the server, complaining not found or number of SSL.  When research various dcom, schannel errors errors in the event logs and a few others, I systematically over the last 24 hours cleared up the boot is so now clean (no time starting network on startup and no message on the service could not start).  It seems that something has happened a month ago after that the server crashed where at least the first DCOM messaged presented themselves, but everything has been working well until it didn't.  The dcom patches end up having to do with the ...\rsa\machinekeys (and the way that it) had a few "account unknown" in it, I cleaned everything that (at a time since I removed all items in this folder, but then put their subsequent return (by crushing all except 2 after creating a new certificate), had to reinstall virtual server and iis 6) , at some point as well.  In any case, I'm at the point where everything works (no event log errors/etc) from startup until you try to connect to the IIS 6 Server using https:... at this point, you get the event SChannel 36871 "a fatal error occurred when creating the SSL server credential information." (no additional information) is connected and the client browser cannot access the site (you can keep trying and it does not work but no event log entry more).  So that's where I'm sitting, http: works fine, https: No.  Certificate appears in the default Web site correct, said valid and possesses the private key, port 443 is there, all addresses by default, netstat shows port 443 same process id as the port 80.  I can't find a copy of SSLDiag do test to see if that prove something?

  So I need help what is not going to get this new job of fixing.  What should I do?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• All-in-One D110A Series: series D110a, fatal error installation problems

  Before our son using this printer at the school, he worked well at home for years.

  I am tired of the to put back, thinking it was already installed on my laptop, and all I needed to do is etup the wireless.

  Something went wrong when setting up wireless, someone walked the table and pulled off the printer power cord.

  Anyway, after that I could never set up the wireless, even after coming back to the default settings. I tried to uninstall all traces of the printer on the laptop and more. Now, I don't remember using a disk to set up a few years previously, only connect the cable USB and passing away.

  When you try this I get some of the elements of lines installed, but three lines who say Photosmart series would come to say no driver found. I tried to download the driver software manually, NG.

  Today, I just tried to use the hppiw.exe, the installation wizard, everything seems ok then I get a fatal error during Installation.

  Clicked by the guests, he even said at one point, a solution has been found, he did a report error report collection before that. Now, shows the following:

  Fatal error during Installation (no joke)

  Error 1935. an error occurred during the installation Assembly Microsoft.VC80.CRT, processor architecture = '86', publicKeyToken = "1fc8b3b9a1e18e3b", version = "8.0.50727.91", type = "win32". See Help and Support for more information. Then he said: go to the HP Support for troubleshooting on Fatal error and MSI. Scan.

  Fact some digging, checked I have a high end version of MS Installer (V.5.0.7601.18896).

  Any help will be appreciated.

  Thanks for your time.

  Well, a fatal error like this on Windows 7 is suggesting to an operating system problem. The following steps should be able to solve it.

  Click Start.

  In the search bar type cmd and press to enter.

  in the window that opens type "msiexec /Unregister" (without the quotes) and press ENTER.

  Type "msiexec/regserver" (without the quotes) and press ENTER.

  If you don't see anything except a new line will appear to type, you've successfully entered the correct line. Now:

  1. Click Start.
  2. In the search bar type in msconfig and press ENTER.
  3. Click the Services tab.
  4. Click Hide all by Microsoft.
  5. Click Disable all.
  6. Click the Startup tab.
  7. Click Disable all.
  8. Click OK and reboot your PC.
  9. Disable any antivirus, firewall and software security on your PC.

  At this point, you should be able to install the software. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Fatal error when you try to select a mission. FreeFlight and lessons works well.

  I have the same probem as Paxer under my flight Sim X works well in free flight and lessons, but cannot work assignments. The program has a fatal error and restart. I'm a developer, and I think that it's link to the XML parser. Because FSX load a page of explanation before you run the simulation. I have install SDK beta 1 so perhaps FSX try to use a DLL bugged. I don't think it's a very big problem. He can't read the explanation Page just before the game. But I'm not a developer of Microsoft FSX.  My system
  Core i7 860 P7p55 deluxe ATI XFX HD 5870 Windows 7 64 bit, 8 GB of DDR3 memory

  Hi Chris,

  I would like to gather more information.

  1. from when are you facing this problem?

  2. don't you make changes on your operating system?

  3. when it last work very well?

  You can try to uninstall and reinstall the game and let us know the answer.

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows dream scene met a fatal error during decoding of the video

  my windows dream scene does not work there is a message that says: "windows dreamscene has encountered a fatal error during decoding of the video". My os is windows vista ultimate. I tried to update and installed the feature with enough space but always has encountered an error. What should I do to recover and use the feature?

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  If you have installed on your computer from Roxio, uninstall it and see if the problem is resolved.

  Method 2:

  If this does not work, let us perform clean boot that could help you solve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• I get fatal errors to computer of Java runtime environment in safe mode I should delete?

  I am again in safe mode, I have a fatal error in Java, which is the reason also to the pogo

  Hi Grannybarbara,

  1. what happens when you start in normal mode?

  2. What is the full error message you get?

  3. did you of recent changes on the system?

  4. what web browser do you use?

  Since you are in safe mode, you can try to perform a clean boot and check if you can start the normal mode without any problem.

  Method 1:

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2:

  Step 1:

  If you are able to boot into normal mode with no problems, then check if the uninstalling and reinstalling Java can help solve the problem.

  To uninstall older versions, see the following link.

  Why should I remove old versions of Java in my system?

  Step 2: To install the latest version, visit the following link.

  Download the free Java software

  Hope this information is useful.

• A fatal error has occurred?

  For some reason any, whenever I turn on my computer, I get this box that says "a fatal error has occurred. Setup cannot continue. Please contact your seller or provider of support. Press to stop the system. Can someone please help me with this?

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Fatal error when you try to install Skype

  Original title: get a "fatal error" when trying to install Skype

  I have windows vista

  Hello

  ·        What link you are trying to download Skype?

  If you have already installed Skype on the system, then I suggest you to uninstall the system, then download and install the latest version of Skype on the site and check if the problem persists.

  Step 1:

  I suggest trying to download Skype from different link and check if you are able to install it.

  Step 2:

  Download Skype then install it in safe mode and check if you are able to install it or not.

  To start in safe mode follow the steps mentioned below.

  a. After you download the file from the Web site, restart your computer.

  b. keep her tapping F8 until you reach the start menu and select Safe mode from the Startup menu and press ENTER.

  c. install Skype in safe mode and check if you are able to install it or not.

  To further support, you can post on the forums of Skype as they can help you in a better way. Click on the link below.

  http://Forum.Skype.com/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.