Win 7 64 bits + FSX = 'Fatal error' & CTD / reboot

Similar Questions

• FSX fatal error. (I think it's a BEX (branch Exception)) I tried searching everywhere and I can't make it work. I'm ready to give up!

  FSX has a fatal startup error. I tried reinstalling clean 3 times and the redone problem surface without fail. The problem started today, but after my reinstall FSX, I'm not sure a system restore will help.

  PC:

  Win 7 Professional

  8 GB RAM

  Processor i2600k

  Error in the report of the event viewer:

  The failing application name: fsx.exe, version: 10.0.61637.0, time stamp: 0x46fadb14

  The failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000

  Exception code: 0xc0000005

  Offset error: 0x00000010

  ID of the process failed: 0x1f88

  Start time of application vulnerabilities: 0x01cc36e99e7533ff

  The failing application path: E:\Microsoft Flight Simulator X\fsx.exe

  Path of the failing module: unknown

  Report ID: e0e181bb-a2dc-11e0-9af2-0026832bf68

  Error information :

  Fault bucket 107817089, type 5

  Event name: BEX

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: fsx.exe

  P2: 10.0.61637.0

  P3: 46fadb14

  P4: unknown

  P5: 0.0.0.0

  P6: 00000000

  P7: 00000010

  P8: c0000005

  P9: 00000008

  P10:

  Attached files:

  C:\Users\W\AppData\Roaming\Microsoft\FSX\fsx. CFG.txt

  C:\Users\W\AppData\Roaming\Microsoft\FSX\dxdiag.txt

  C:\Users\W\AppData\Roaming\Microsoft\FSX\scenery.cfg

  C:\Users\W\AppData\Roaming\Microsoft\FSX\fdr.dat

  C:\Users\W\AppData\Roaming\Microsoft\FSX\dll. XML

  C:\Users\W\AppData\Local\Temp\WER1D17.tmp.WERInternalMetadata.XML

  These files are available here:

  C:\Users\W\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_fsx.exe_c6395367382ce932b23bb886e4eea0406324b9bd_1ee958b0

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: e0e181bb-a2dc-11e0-9af2-0026832bf687

  State: 0

  XML

  -

  -

  1001

  4

  0

  0 x 80000000000000

  4112

  Application

  W PC

  -

  107817089

  5

  BEX

  Not available

  0

  FSX.exe

  10.0.61637.0

  46fadb14

  unknown

  0.0.0.0

  00000000

  00000010

  c0000005

  00000008

  C:\Users\W\AppData\Roaming\Microsoft\FSX\fsx. CFG.txt C:\Users\W\AppData\Roaming\Microsoft\FSX\dxdiag.txt C:\Users\W\AppData\Roaming\Microsoft\FSX\scenery.cfg C:\Users\W\AppData\Roaming\Microsoft\FSX\fdr.dat C:\Users\W\AppData\Roaming\Microsoft\FSX\dll.xml C:\Users\W\AppData\Local\Temp\WER1D17.tmp.WERInternalMetadata.xml

  C:\Users\W\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_fsx.exe_c6395367382ce932b23bb886e4eea0406324b9bd_1ee958b0

  0

  e0e181bb-A2DC-11e0-9AF2-0026832bf687

  0

   
  I tried:
  Reinstall complete
  Scannow
  Deletion of UIAutomationCore
  FSX. CFG HIGHMEM Fix
  Secure boot
  Setting virtual memory to 3072
  Memory virtual tuning system managed
   
  I am at my wits end and I'd really like a solution!
   
  Thanks in advance!

  Hi Fahimulla;

  I have the 'FSX 'Gold Edition' ' which is FSX (records 1 and 2) and acceleration.

  I tried the clean boot

  Registry cleaner

  I have searched the Internet for others like me and disabled the Dep. (this cause the BEX to become an error APPCRSH error).

  None of the above worked.

  The only thing that worked was to reinstall FSX in a directory that is:

  NOT in Program files (x 86)

  NOT the same name as the corrupted (earlier) version of FSX. (For example I got the defalut FSX gives the first installation. I then changed to the C:\FSX and I have the fatal error occur.

  I also use the 32-bit C:\windows\system32\uiautomationcore.dll in the FSX main folder (where the .exe is located) and I'm not having CTDs on using the menu while the Simulator works...

  While my problem may have been avoided, for now, I hope that something is done to address this recurring problem.

  Thank you very much for your help!

• FSX fatal error which makes this repair FSX?

  I was change one of my panel.cfg files and when restart FSX seen the fatal error message.  I've never used FSX fix before, what it repairs?

  that is, it removes my add on scenery and aircraft, t - it change my network settings or what?

  Thank you

  Hi Goldsworth,

  Please contact the Flight Simulator supported the use of the links for more information below.

  Solutions for the Flight Simulator Centre

  http://support.Microsoft.com/GP/cp_flightsim_master#tab1

  Microsoft Flight Simulator Web site

  http://www.Microsoft.com/games/fsinsider/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• FSX fatal error message

  Hi I get microsoft encounted an unrecoverable error message to halfway through a flight on Flight Simulator x gold edition and cannot solve the problem please help. My spec PC Edition Windows Vista Home premium CPU intel core duo E4700 2.80 GHz each processor, 4 GB operating system, 32-bit memory. My graphics card is ATI Radeon HD4350 512 MB. I don't know if the upgrade card from my chart could solve this problem?

  HI T.O.P.G.U.N,
  I suggest you try the following steps.

  Step 1: Check Event Viewer for detailed information on the problem.

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Step 2: You can follow the steps in Knowledge Base Article and check to see if it helps mentioned below.

  Game hangs or quits unexpectedly

• Cannot add my phone via bluetooth on win 7 64 bit, get code error: 0 x 80070015

  the windows error box says "add device failed, leading to an unknown error.the error code is 0 x 80070015.»

  can someone help me with this...

  Hello

  · What is the brand and model of the phone?

  This problem may occur when there is a problem of compatibility between the transmitter and the battery Microsoft Bluetooth. Or, it can occur if the computer uses a stack non-Microsoft, and this battery is not compatible with the device.

  Method 1: Follow the steps mentioned in the link below

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note:

  The link above also applies to Windows 7.

  Method 2:

  To resolve this issue, contact the manufacturer of the laptop to see if their transceiver works with the Microsoft Bluetooth stack. In addition, ask the manufacturer how to add devices using the Microsoft Bluetooth stack. If the device Microsoft included its own transmitter/receiver, you may need to use the Microsoft transceiver for this problem.

  You can check the link below

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  I hope this helps.

• OfficeJet Pro L7555 installation fails on Windows 7 (64-bit). "Fatal error".

  Printing/scanning doctor does not resolve.  Wired network.  This device works on my network for almost 2 years.  Has stopped working and will not reinstall.  Basic printing works, but cannot scan.  «LaunchNetworkInstall gets back unexpected value 1246.»

  In short, if you ar following the instructions to the letter - that is not possible.

  I downloaded the software from the link I provided and that you have provided. I chose the full features software and installed the printer on my Win7 machine. Both these pages appear in all versions of the software, and the page with the check box that requires you to accept the conditions required by law. There is no way for these pages to be omitted on your computer.

  I'll transfer my instructions to uninstall/reinstall of the printer.

  First of all, if you use a USB cable, be sure to remove it. Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  The START menu type "%temp%" and press on ENTER. Here, I want you to press Ctrl+A and press on REMOVE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  Follow this link to download full feature software and drivers of the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-79356-2&cc=us&DLC=en&LC=en&OS=4063&product=3643617&sw_lang=

  Install and let me know the result!

• Cannot install java 6 on win 7 64 bit computer laptop: error 1723

  same deleted (uninstalld) old java and tried

  Here's what must tell Java Web site: http://www.java.com/en/download/help/error_1723.xml

• Fatal error at startup in FSX

  When I opened to fsx someday, the graphical quality was low. I played with the settings, but nothing has worked. I've fixed from the installation disc. Next time I open up fsx, it loads the landscape (because it is the first start up) and a few seconds later, A Fatal Error occurs. I have to restart.

  The error data:
  Problem event name: APPCRASH

  Application name: fsx.exe

  Application version: 10.0.61637.0

  Application timestamp: 46fadb14

  Fault Module name: simprop.dll

  Fault Module Version: 10.0.61637.0

  Timestamp of Module error: 46fadb59

  Exception code: c0000005

  Exception offset: 00006da7

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  More information about the problem:

  LCID: 1033
  My computer information:
  Windows 7 Professional 64 bit
  Intel i5 processor
  FSX Gold Edition

  Hello

  I suggest to perform the steps in the following link and check:

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know if it helps.

• Win 7 64 - bit error 1402 Setup / Remove Programs r key blocked

  I tried to install MS Office 2010 and to install HP Officejet J4580.

  I tried to remove some programs.

  Win 7 64 - bit error 1402 Setup / Remove Programs r key blocked with unknown

  Hello

  1. do you receive the same error message when you try to install HP Officejet J4580?

  2 have you made any changes to the computer before the show?

  I suggest you follow these methods and check.

  Method 1: Run the application as administrator and check.

  Refer to this link: How to apply once with a full administrator access token?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

  Method 2: try to install using this printing software tool HP Officejet J4580.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Regarding the installation of MS Office 2010, you can visit this link and check if it helps. You receive an error message when you install an Office program or you open an Office program or a document

  http://support.Microsoft.com/kb/838687

  I hope this helps!

• Impossible to install cp1525 reached hp 64 bit of vista windows 99% say that it took too long fatal error try again

  Impossible to install cp1525 reached hp 64 bit of vista windows 99% say that it took too long fatal error try again

  Hi asarabia

  Fatal error documents

  Restore the original factory configuration

• Oracle Forms Win 7 64 - bit error INST-07407: unable to detect the platform of the machine or pieces of JVM

  
  I'll try to install Oracle Forms 11.1.2.0 on Win 7 64 bit and get INST-07407: unable to detect the platform of the machine or the pieces of the JVM.

  I followed the steps described in Oracle Forms 11.1.2.0 on Win 7 64 - bit bit JVM error but still unable to solve my problem.

  Here are the details of the version of the installed JDK.

  C:\Program Files\Java\jdk1.6.0_45 > java-version

  Java version "1.6.0_45".

  Java (TM) SE Runtime Environment (build 1.6.0_45 - b06)

  Java for 64-bit Server VM (build 20.45 - b01, mixed mode)

  C:\Program Files\Java\jdk1.6.0_45 > % java_home Echo%
  C:\Program Files\Java\jdk1.6.0_45

  C:\Program Files\Java\jdk1.6.0_45 > echo %path%
  C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows; C:\Program Fi
  les\Java\jdk1.6.0_45\bin

  Installer: -.

  1 jdk-6u45-windows - x 64

  2 wls1036_generic.jar for 64-bit platform

  3 ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1

  Please advise. Thank you.

  I don't know if help.

  I have installed Oracle Forms 11 g on Windows Vista Home Edition (64-bit), had been an experience horrible (much testing), although eventually I got.

  If I'm not mistaken, I used this guide:

  Oracle WebLogic & Forms 11g Release 2 installation guide

• Fatal error C6380 install on Windows 7 32-bit

  As the title suggests, HP C6380 AIO install the software on a laptop HP with Windows 7 32 bit. First, the closed disc had only driver for XP/Vista and Mac package. I helped the owner by telephone with the installation in a first time. He has inserted the disk and started installing program. Gets through extraction, spash HP install and starts actual installation by checking the system and install then real begins. Almost immediately, he gets a fatal error showing the folder Data/Local/Temp/xxxxx of user/Application as the location of the error. Through a process of checking online for the solution. Said the solution found and loaded on the desktop. Completed unsuccessful installation uninstalls and asking to reboot.

  To restart, I run the solution file. No really help. I have the printer set up on its wireless network and checked that it is there and works. The problem seems to be with the software package and the installation on Windows 7. I downloaded the package in 32-bit Windows 7 and tried to run to settle. I get the same fatal error after unpacking and checking system. Same spot, same error message.

  The user is configured as an administrator account.

  I have a right-click the software downloaded and run as administrator.

  Also checked and resolved any issue of property to the admin user.

  I tried to download and run the XP/Vista package, but it does not, claiming that it is not for Windows 7.

  I WAS able to install the new printer in the printers from Windows 7 folder. He recognized and installed the C6380. Print test page with success. All right. But we cannot use all the features and options without the bundled software. I need a solution to get this loaded software.

  Thank you

  Dave

  I found a fix for the problem so I thought I would post it here. I did go to the printers & Devices folder and do a printer installation. I leave install and search for Windows 7. After the installation is complete, I restarted the AIO software and it went flawlessly. I have now all features.

  Good luck to all.

  Dave

• Oracle Forms 11.1.2.0 on Win 7 64-bit bit JVM error

  Try installing Oracle Forms 11.1.2.0 on Win 7 64 bit and get INST-07407: unable to detect the platform of the machine or the pieces of the JVM.
  
  I read somewhere where you have spaces in the JDK install path problems, so I changed the path to c:\oracle\java instead of C:\Program Files\java\jdk1.6.0_24. I have a 64 bit installed JDK. What else could be the cause of this error message? Open a request to Oracle service was no help - hoping to help here. I set JAVA_HOME and added the House of java at the end of the PATH. I can start and stop the weblogic home C:\Oracle\middleware_oraforms middleware server.
  
  
  c:\Oracle\Java\bin > java-version
  Java version "1.6.0_24".
  Java (TM) SE Runtime Environment (build 1.6.0_24 - b07)
  Java for 64-bit Server VM (build 19.1 - b02, mixed mode)
  
  c:\Oracle\Java\bin > % JAVA_HOME Echo%
  C:\Oracle\java
  
  c:\Oracle\Java\bin > echo %path%
  C:\Oracle\Ora10\bin; C:\product\11.2.0\dbhome\bin; C:\Oracle\ORA11\11.2.0\Bin; C:\P
  Program Files (x 86) \AMD APP\bin\x86_64; C:\Program Files (x 86) \AMD APP\bin\x86; C:\
  Windows\System32; C:\Windows; C:\windows\System32\Wbem; C:\windows\System32\Windows
  PowerShell\v1.0\; C:\Program Files (x 86) \ATI Technologies\ATI. ACE\Core-Static; C:\
  Program Files (x 86) \WinMerge; C:\Program Files (x 86) \Rational\common; C:\Program F
  Islands (x86)\Hummingbird\Connectivity\11.00\Accessories\; C:\Program Files (x 86) \R
  ational\ClearCase\bin; C:\Program Files (x 86) \Microsoft SQL Server\100\Tools\Binn
  \VSShell\Common7\IDE\; C:\Program Files (x 86) \Microsoft SQL Server\100\Tools\Binn
  \; C:\Program Files\Microsoft SQL Server\100\Tools\Binn\; C:\Program Files (x 86) \w
  Microsoft SQL Server\100\DTS\Binn\; * C:\Oracle\java*
  
  
  Product.Properties

  DOCSWEBROOT=http\\://download.oracle.com/docs/cd/E17904_01/web.1111
  ProgramGroupName=BEA WebLogic Platform 10.3 (Integrated Build)
  PLATFORMHOME=C:\\Oracle\\MIDDLE~1\\wlserver
  WLS_INSTALL_DIR=C:\\Oracle\\MIDDLE~1\\wlserver
  USER_INSTALL_DIR=C:\\Oracle\\MIDDLE~1\\wlserver
  CONFIGWIZ_HOME=C:\\Oracle\\MIDDLE~1\\wlserver
  BEAHOME=C:\\Oracle\\MIDDLE~1
  MW_HOME=C:\\Oracle\\MIDDLE~1
  WL_HOME=C:\\Oracle\\MIDDLE~1\\wlserver

  First of all, there is no need to relocate the jdk system. Part of your problem is more likely the result of a known limit which is caused by the system path or the CLASSPATH containing special characters like the parentheses in (x 86). So, follow these steps:

  Before you begin, make sure that your computer has a static IP address. If it is not the case, you need to install the loopback adapter Windows. For more details, read the Setup Guide and system requirements.

  1. clean your installation attempts failed. Don't forget to also delete the folder C:\bea assuming that no other product does WLS.

  2 uninstall the 64-bit jdk and reinstall where you prefer. I would recommend its default location.

  3 log in Notepad and let it open as a place of detention to paste the following information.

  4. open system properties. Computer > right click > properties > Advanced System Properties > Environment Variables

  5. search for the path in the system variables and values cut into the Clipboard and paste them into Notepad session, that you opened above. Save this information for later.

  6. in the value of path, he has defined as follows, make sure the path to the jdk is correct for your installation:
  

  % SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%; C:\Program Files\Java\jdk1.6.0_37\bin

  
  7. you need the 'generic' WLS download if you plan to run 64-bit. It is a jar instead of an exe file. Assuming you are using WLS 10.3.6, open a DOS window and start Setup as follows:
  

  java-jar C:\PathToJar\wls1036_generic.jar

  
  After completing the installation of WLS and FMw installation and configuration, you can reset your WAY to the way you want to.

• A fatal error has occurred Message on FSX

  Hello

  When I play my game, the game suddenly crashes, then closes then this message comes saying "A Fatal error has occurred", and then restarts the game. Please give me a help about it. Thank you.

  Hi Lisa,

  You can check out the following link and try the suggested steps to fix the problem:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/Flight-Simulator-x-has-encountered-a-fatal-error/8a2a053e-8D64-45A7-80fb-f04558dda696

  Hope this information is useful.

• Error does not support 64-bit Windows, Explorer of Titanic on Win 7 64 bit installation

  Original title: Titanic Explorer on Win 7 64 bit Running

  Hello, I just got an application called James Cameron's Titanic Explorer, it's cool, but I have a problem installing it.

  When I try to install it, it says it does not support 64-bit Windows. I am running Windows 7 Home Premium x 64 bit.

  Is there a way I could run in 64-bit Windows? Thanks for help

  EDIT: I tried compatibility mode, no luck.

  According to the program, it does not work on a 64-bit so make OS run natively is very likely.

  If you have another Windows license, you can still use Windows Virtual PC to run virtually, but keep in mind any visualization program has limited graphics ability and it may not always work well or very quickly.