Fatal error (attempt to subdue the password)

Similar Questions

• Password reset disk error - "year error occurred while the wizard attempted to set the password for this user account.

  Hello!

  -A bit of background: the desktop PC that I use is Windows Vista Ultimate Edition, with active user accounts total five. I have my own account, and I can access the computer through (or through account from my brother, because I know its password).--

  I had this problem recently came where the administrator password (that I know for a long time and never changed) no longer works. So, after some research, I created a reset password on a USB disk, that I found in my house. I managed to create the disc, but when I tried to put the new password, I got the message error "an error occurred while the wizard attempted to set the password for this user account', which I must say is not very clear. I found a few methods of force - reset the password for the account of the admin, as using a sort of Windows Vista DVD or go to Safe Mode to find the hidden administrator account... but I have no idea what this DVD is or where to find, and in Safe Mode, there is no account user administrator to be seen. I believe that my machine is corrupted, but I don't want to buy a new. I want just to reset a password...

  Any help is appreciated. If I was not specific enough, I can specify in comments.

  Thank you!

  Hello

  You must make a password reset disk before that there are problems with a password, not afterwards.

  ________________________________________________________________

  Read this for your problem:

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  _____________________________________________________________

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• I tried to reset my password computer laptop but the laptop telling me an error occurred while the wizard attempted to set the password for this user account how can I fix this pleas

  I tried to reset my password computer laptop but the laptop telling me an error occurred while the wizard attempted to set the password for this user account, how can I fix this means if someone knows how to fix teas pleas answer me quickly I have to work

  Logging in as an admin account, then reset the password for the account of the problem.

• a fatal error has occurred and the execution of the application took end. Adobe Captivate one attempts to save all of your work in the respective folders of the project as files cpbackup

  Hello

  We have Adobe Captivate installed 8.0.0.145 Windows 7 x 64 v.

  Activate Adobe crashes with the following error: a fatal error has occurred and the execution of the application took end. Adobe Captivate one attempts to save all of your work in the respective folders of the project as cpbackup files.

  I uninstalled Adobe Acptivate, rebooted the PC and reinstalled activate Adobe - unresolved error.

  I have cleared the cache under settings, clear the cache - unresolved error.

  Please notify.

  Kind regards

  George

  
  

  The update should be available to help, updated. It is available since October 2014.

  Being administrator is not the same thing as Captivate running as an administrator that must be put in place in the menu right click on the shortcut that launches Captivate. You have restricted functionality if this is not done.

  I told you how to clear preferences, with the file Utils. First close Captivate, when you restart CP will create a new preferences folder.

  

  If you have a lot of customization that you will lose when the erasing of the preferences. To keep them, have a look at my blog:

  Captivate 8.0.1 Install? Keep your customization! -Captivate Blog

  Layouts folder is located in the public Documents. It is a copy of the original folder in the gallery. Same thing with the Interactions.

  

• HP MINI 1000: HP MINI SYSTEM STOP FATAL ERROR. CNU9302RM6. Need password to connect!

  HP MINI SYSTEM STOP FATAL ERROR. CNU9302RM6. Need password to connect!

  Please someone SOLVE THIS PROBLEM. I HAV NOT OPEN MY PC one YEAR, please help me if you can?

  Good day!

  Boss!

  I have the password for you

  Please enter = e9lof17b4g

  Kind regards

  KNRK

  I work for HP

• Win2k3 Server IIS SChannel event 36871 "a fatal error occurred when creating the SSL server credential information."

  To make a long story short, I went to use client software that I use a few times a week and it would not connect to the server, complaining not found or number of SSL.  When research various dcom, schannel errors errors in the event logs and a few others, I systematically over the last 24 hours cleared up the boot is so now clean (no time starting network on startup and no message on the service could not start).  It seems that something has happened a month ago after that the server crashed where at least the first DCOM messaged presented themselves, but everything has been working well until it didn't.  The dcom patches end up having to do with the ...\rsa\machinekeys (and the way that it) had a few "account unknown" in it, I cleaned everything that (at a time since I removed all items in this folder, but then put their subsequent return (by crushing all except 2 after creating a new certificate), had to reinstall virtual server and iis 6) , at some point as well.  In any case, I'm at the point where everything works (no event log errors/etc) from startup until you try to connect to the IIS 6 Server using https:... at this point, you get the event SChannel 36871 "a fatal error occurred when creating the SSL server credential information." (no additional information) is connected and the client browser cannot access the site (you can keep trying and it does not work but no event log entry more).  So that's where I'm sitting, http: works fine, https: No.  Certificate appears in the default Web site correct, said valid and possesses the private key, port 443 is there, all addresses by default, netstat shows port 443 same process id as the port 80.  I can't find a copy of SSLDiag do test to see if that prove something?

  So I need help what is not going to get this new job of fixing.  What should I do?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• What is "Error of Privoxy" Privoxy (oooooobo) fatal error: could not check the configuration file ':(error number 2) Config.Txt

  What is "Error of Privoxy" Privoxy (oooooobo) fatal error: could not check the configuration file ':(error number 2) Config.Txt.

  I always get this message in a long horizontal area on my desk top once I restart and turn on my computer.

  Thank you

  "Privoxy" is a 3rd party is no program not part of Windows XP.  You can go to
  Panel-> Add/Remove programs
  and remove this program.  If you still think that you need this program, try reinstalling it on Sourceforge
     <>http://sourceforge.NET/projects/ijbswa >

  HTH,
  JW

• Windows dream scene met a fatal error during decoding of the video

  my windows dream scene does not work there is a message that says: "windows dreamscene has encountered a fatal error during decoding of the video". My os is windows vista ultimate. I tried to update and installed the feature with enough space but always has encountered an error. What should I do to recover and use the feature?

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  If you have installed on your computer from Roxio, uninstall it and see if the problem is resolved.

  Method 2:

  If this does not work, let us perform clean boot that could help you solve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• 10150:error: you must provide the password for SYS the...

  Salvation;
  I'm doing the installation of vault db r12.0.6 db - version 10.2.0.3... While I try to install I get this error:
  
  10150:error: you must provide the password for SYS the Oracle Database Vault will be installed. in the vault of the Oracle 10.2.0.3.0 database Scripts pane. Installation cannot continue
  for this component.
  
  
  
  Anyone have idea?
  
  PS: I found the remark and he says:
  
  Selected user: stop the installation of this component only.
  The solution is to ignore the error.
  
  But if I chose this option that I come back after the next stage of its 90% waiting and begging and not spend the next step
  
  Thank you
  HELIOS

  Helios,

  Why should you install the vault of the database? Please note that this is optional and can be installed/configured later.

  Kind regards
  Hussein

• Error: Windows cannot change the password when attempt to set a password to connect to the Windows XP computer.

  Original title: Windows cannot change the password.

  I'm trying to set a password on my computer with windows xp professional and everytime I try, I get a message saying: Windows cannot change the password. Please can someone help me.

  With our thanks

  Elizabeth

  Hi Elizabeth,.

  You can follow this link & check if the problem persists:

  Impossible to change the password for the administrator account in user accounts in Control Panel

  Hope the helps of information.

• error occurs when you use Assistant password reset - "an error occurred while the wizard attempted to set the password for this user account.

  I create the reset disk of password on another laptop, because the other laptop I forgot the password. There is solution in another thjred saying to open cmd, but I can't open it because there is no password to access. But I have another account which is a guest account, then maybe I can reset the password to the guest account? (no internet in the guest account)

  Hello

  You cannot create a reset disk of password on another computer to another computer where you have forgotten your password.

  You create a password reset disk on your computer in case, and before that you have forgotten your password, not after that you forget it.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-password-reset-disk

  @@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it is not applicaple, you need to reinstall the operating system.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Fatal error C000021a 0xC0000354 after the installation of security updates, October 12, 2010

  I installed the updates of windows on October 12, 2010 and also improved the adobe acobate security update security this week.  Got a fatal error code I listed above... when I reboot the screen was frozen... loved this blue screen... now what... microsoft help me with this one?

  Hello
   
  I suggest you try the steps in the article.
  http://support.Microsoft.com/kb/156669

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• LJ-Pro-200-Color-MFP-M276-Full-solution-12201 - Windows XP - fatal error has occurred with the HP Installer

  Can someone help me to go with my new printer.  I'm unable to go ahead with the HP Installer.  Message error "fatal error occurred...". »

  Download Driver on the hp site does not.

  Have done the following:

  1 deleted everything about previous printer

  2 removal of Skype

  3. unlocked in the properties of the Application

  4 defrag

  5. full scan

  6 firewall & AVG 'off '.

  7. disk cleanup

  8 dial-a-fix

  9 Windows Update

  10 scanned with AVG App

  11 rebooted 3 times

  12. revival of the installer of HP 7 times

  13 checked compatibility

  Thank you very much.  I would be grateful 'something' anyone can suggest.

  Concerning

  Elaine

  JALOPY,

  I just tested the installation program and it works fine. Please check if you have a universal print driver installed on your machine. If you do, then I suggest this uninstall, reboot and try again.

  You can check to see if you have the driver installed by accessing your print server properties, click the driver tab and see what drivers are installed.

  Please let me know if it works or you need help.

• Fatal error during installation of the software for Officejet Pro 8500 A909g in Windows XP

  This error occurs during the last stage of the installation. I downloaded the latest software from the HP website as well as the supposed "XP Fix", I used the HP service, I used the brush cleaning HP to completely erase the old files and re-installed.  I've exhausted ALL the options on the Web site to correct this. Nothing works. I spent over 8 hours to solve this problem.  My computer guy said it of because the software has been updated to run Win 7 and is not able to access the XP of the software part to make it work.

  Error Situation code: 03867699

  Error Situation code: 24370865 "fatal error during Installation" 'C:\Program HP Imaging\ {F86D9734 - D358 - 4C5B - BC2B - 6D90557FF05B} \hpzsetup.exe' "-adding a device.

  I see other similar messages but can't find an explanation or difficulty.

  Help would be greatly appreciated!

  The only thing to do would be to format and reinstall the OS.  It's a little extreme, but it should work.  I'm sorry, but that's the last thing I know to try.  If you try this, make sure that you back up all your data.  Good luck.

• Firefox does not attempt to remember the passwords even if I click the "Remember" button and I didn't erase the passwords etc. memory of passwords

  Security is set to "remember passwords" and privacy settings does NOT erase passwords. When I go to connect to a site of the bubble 'Remember password' is displayed, but does nothing when I click on "Save password". He hang around for a few seconds then disappears. When I come back on the Firefox site does not enter my username and password but still asking if I want to remember the password.

  If starting in safe mode fix then try this:

  It is possible that there is a problem with key3db and signons.sqlite files that store the encrypted names and passwords in Firefox.
  
  Rename signons3.txt and signons.sqlite files in the Firefox profile folder.
  
  You can add .old files (key3.db.old and signons.sqlite.old) names or move them to another folder to make it possible to cancel the action.
  
  You must define a new master password after renaming or removing the signons3.txt and all the currently saved passwords are lost.
  
  If that worked, then you can delete the renamed files that are no longer needed.
  
  
  
  See:

  • "Troubleshooting" in http://kb.mozillazine.org/Password_Manager