Fdisk.exe

Similar Questions

• New hard drive installed on Portege M200 but does not start

  I upgraded the hard drive in my Portege M200 from 4 GB to 80 GB using Parted Magic to clone the original disc. Cloning complete successfully, but instead of starting with the new drive, the M200 simply display a blinking cursor when turned on. Any help is very appreciated.

  TIA, update

  Hello

  Maybe you can try one of the below to solve your problem:

  BUT! ALWAYS keep a backup!

  Boot the system with a flexible BACK (with fdisk.exe inside) to restore the MBR by typing

  FDISK/MBR

  This works even on a SATA drive. Start alternative all Win2k or XP installation CD, go to the console command and issure of recovery

  FIXMBR

  See you soon

  Tom

• Install the drive Media Express on Satellite M60

  I just bought myself a M60-170. Because I have to join a domain, I had to format the drive and reinstall with XP pro.
  During the reinstallation, I deleted all partitions and EMP has disappeared. After reading the manual, I saw that there is an option for EMP.

  When I boot with the EMP recovery disk and try to reinstall it, it says that it will destroy all data partitions. But does take?
  I made a partition of 250 MB unallocated at the end of the training, but it also reformatted my OS which is located on the partition of handguns?

  Hello

  If you install the Express Media Player so the whole HARD disk will be deleted!
  I found this installation instruction:

  1. ALL DATA ON THE HARD DRIVE WILL BE DESTROYED IRREVERSABLY

  2. install Express Media Player:
  Boot from the recovery Express Media Player CD
  --> use [delete all Partitions] (can be on the left side of the menu for older versions of reader).
  THIS ERASES THE ENTIRE HARD DRIVE!
  --> 0 x 88 partition ID for the Express Media Player will be created

  (3) boot with the Windows XP Recovery CD, go to expert mode and exit the "TOSHIBA Recovery Tool" (version OEM Ghost) using menuitem "Quit."

  (4) you can use fdisk.exe or gdisk.exe - I'll show the syntax here gdisk
  (its easier to describe and there are a lot of descriptions for FDISK on the net)

  (5) now, we create two partitions (size of 50%: 50% - playersize).
  --> At the DOS prompt, type:
  Gdisk 1 /cre /pri /sz:50%-> creates a primary partition 1
  Gdisk 1 /cre /ext-> creates an extended partition 2
  Gdisk 1/log /cre-> creates a 2nd logical partition
  Gdisk 1/p:1-> partionion set 1 active /act

  (6) now reboot with Windows XP Recovery CD, go to expert mode
  (7) menu use: Local\Partition\From Image, choose image GHO menu

  (8) there should only be ONE partition available source:
  1 primary DiskLoad NTFS 07...-> pick this one!

  (9) Select destination disk (there are also only one)
  1 basic...-> pick this one!

  (10) now you need to choose the destination partition - there should be three to choose!

  (11) select:
  1 primary 0C Fat32 without name...-->! BE SURE TO CHOOSE THIS ONE!

  (12) to confirm that you want to write on this partition

  "(13)" TOSHIBA Recovery Tool "is unpack and install the operating system

  (14) subsequently Windows XP and Media Player Express are installed

• Express the Media Player (EMP) recovery disk - satellite P105-S6024

  I have a problem with my on my new machine satellite P105-6024 express Media Player software.

  As I bought it, everything works fine. But then, I did the partitions on my HARD drive and I instaled all the software recovery disc. And everything looks earlier and work properly but Express Media Center. It seems that it is not installed. I found the special Express Media Player restore disk but I don't know how to use it. (I am a novice complite). As I knew EMP is a linux-like software and it is not visible in Windows. And I know that there was a small special partition dedicated to this application. This partition has been deleted. And I'm not sure that it is possible to install EMP once more on my laptop. How can I use the EMP recovery disk? If I just run in the windows environment I see just a few files - but their execution, nothing is happen. I'd appreciate a small manual.

  Thank you very much in advance

  Hello

  I found this on the web:

  Installation Guide step by step for Express Media Player and Windows XP Recovery on two partitions in Expert mode:

  (1) all DATA on HARD drive will BE DESTROYED IRREVERSABLY (it's serious!)
  (2) install Express Media Player:
  Boot from the recovery Express Media Player CD
  --> use [delete all Partitions] (can be on the left side of the menu for older versions of reader).
  THIS ERASES THE ENTIRE HARD DRIVE!
  (3) boot with the Windows XP Recovery CD, go to expert mode and exit the "TOSHIBA Recovery Tool" (version OEM Ghost) using menuitem "Quit."
  (4) you can use fdisk.exe or gdisk.exe - I'll show the syntax here gdisk
  (its easier to describe and there are a lot of descriptions for FDISK on the net)
  (5) now, we create two partitions (size of 50%: 50%-playersize).
  --> At the DOS prompt, type:
  Gdisk 1 /cre /pri /sz:50%-> creates a primary partition 1
  Gdisk 1 /cre /ext-> creates an extended partition 2
  Gdisk 1/log /cre-> creates a 2nd logical partition
  Gdisk 1/p:1-> partionion set 1 active /act
  (6) now reboot with Windows XP Recovery CD, go to expert mode
  (7) menu use: Local\Partition\From Image, choose image GHO menu
  (8) there should only be ONE partition available source:
  1 primary DiskLoad NTFS 07...-> pick this one!
  (9) Select destination disk (there are also only one)
  1 basic...-> pick this one!
  (10) now you need to choose the destination partition - there should be three to choose!
  (11) select:
  1 primary 0C Fat32 without name...-->! BE SURE TO CHOOSE THIS ONE!
  (12) to confirm that you want to write on this partition
  "(13)" TOSHIBA Recovery Tool "is unpack and install the operating system
  (14) subsequently Windows XP and Media Player Express are installed

  Hope this will help you. Good luck!

  Good bye

• Problems installing Windows 95

  Hey

  I install Windows 95. In the configuration window, it will in MS-DOS mode. Here are the commands I used as suggested by others:
  A:\>Fdisk
  I then restart.
  C: A:\>format
  You press on enter to volume name.
  A:\>C:
  Win95 C:\>MD
  C:\>copy A:\Win95 C:\Win95
  He then said he could not find that directory in drive A:.
  So I did:
  C:\>dir A:
  Then he showed me a list of files in drive A:
  Command.com
  attrib.exe
  Debug.com
  Label.exe
  Autoexec.bat
  MEM.exe
  format.com
  Edit.com
  Chkdsk.exe
  CD1.sys
  CD2.sys
  Move.exe
  sys.com
  Regedit.exe
  Uninstal.exe
  xcopy.exe
  CD3.sys
  Find.exe
  HIMEM.sys
  ScanDisk.exe
  config.sys
  DELTREE.exe
  CD4.sys
  Fdisk.exe
  ScanDisk.ini
  MSCDEX.exe
  Xcopy32.exe
  Extract.exe
  28 files dir (s) 0
  How to install windows?
  EDIT: Guys, I fixed it. Try to ignore this thread.

  OK, here's what you want to do. I tested all these steps myself and checked it works :D

  1. download an iso bootable win95 here
  http://www.allbootdisks.com/download/ISO.html
  2. then download a version of Ultra ISO from here
  http://www.ezbsystems.com/UltraISO/history.htm
  3. now open win95 you downloaded with Ultra ISO and copy the contents of the windows 95 CD-ROM in ISO iso and save it.
  4. now grab a copy of VMware Player here.
  http://www.VMware.com/products/player/
  5. now, create a new virtual machine, be sure to point the cd to the modified image
  6. now use fdisk to make your c drive partition
  7. now to send a ctrl-alt-del, real fast, click in the window and press f2 real quick.
  8. now format the c: drive.
  9. now go back to your c: drive and create a folder win95 (c:\win95)
  10. now go to your win95 cd (probably r :))
  11. now copy the whole folder on drive C, you created (copy *. * c:\win95)
  12. now go back to your drive c, and then navigate to the folder (c:, cd\win95) win95
  13 Type Setup.exe
  14. after the first restart, press f2, and change the boot order so that the hard drive is the 1st thing on the boot order, save the changes and exit the bios.
  15 complete the installation, and you should be all set.

• The very problematic recent virus - qtfcyyp.exe - why he does not know?

  Hello

  System of my friend (P4, 1GD - ram, XP + sp3 with a net conn Bsnl in Bangalore, India) was struck by the Trojan qtfcyyp.exe slows down his system. I used computers for a very long time and considered as somewhat advanced as he called me.

  I have never been troubled by viruses in the last 10 + years - so people take care.

  If you disable the sound start, he comes back on reboot. If you remove it, it is up to the time wherever the net conn is upward.

  Despite the removal of the operating system and re - install, she came back. Despite formatiing, she came back.

  The longer it took back was after about 2 or 3 weeks after you delete all data on the drive, making a fdisk and changing file system to the old Fat32 and updated with an another internet service provider where the popular Bsnl has been targeted. She came back at the time wherever the free Avast anti-virus has been removed in order to install AVG as my friend does not want to buy it because he feels that slow down of its system.

  As above, the file has been blaocked by Online Armor firewall this time, soon, he had another 'wuaucldt.exe' this time in Windows folders, drivers and System 32 and managed currently to damage the XP again and I understand that the computer has stopped these last days.

  Last week I was not able to get even in Safe Mode to remove the files and do a restore.

  Let's see what I can do this week, no doubt.

  If I understand the research that the virus "qtfcyyp" is new since the 06March, 2011, but yet little known info. Why is that its causing havoc?

  Hi jamesdsouza,

  ·         The computer now starts on the desktop?

  Method 1: If this is the case, then you can check if the Microsoft Safety Scanner can help analyze the system. Check out the following link to do the same thing.

  Microsoft Safety Scanner - free online tool for PC health and safety

  You can also download and install Microsoft Security Essentials.

  Method 2: Try to start in safe mode with networking , if you are unable to start up normally.

• iTunes.exe found entry point

  After the last update error ITunes.exe entry point not found

  avcfplayersetclientenforcedexternalprotectionmethod could not be found in the dynamic link library c:\program files\iTunes\itunescore.dll - I download windows 10 iTunes 64 install and ran repair - repair has not fixed the problem

  Entry point errors can usually be fixed by removing the offending dll, and then repair the component it is programs and features Control Panel. iTunesCore.dll is part of the main application to iTunes and it will usually be in iTunes C:\Program or C:\Program Files (x 86) \iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  More information area has direct links with the current and recently built in case you have problems to download, need to revert to an earlier version, or try the iTunes for Windows (64-bit-for older video cards) release as a work around for performance issues, or for compatibility with QuickTime software or a third party on 64 - bit systems.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  Your library must be affected by these measures, but there are links to tips of backup and recovery elsewhere in the tip of the user.

  If the problem persists and you have a 64-bit system try for the old version of video cards which is a 64-bit Installer for most of the 32-bit code, similar to all 64 bit iTunes up to 12,1 versions.

  TT2

• FirefoxPatch.exe

  Wednesday 16 December 2015 my AVG Internet Security scan weekly all computer has notified me that I had 2 horse of Trojan Inject3/SGL on C:\Users\Administrator\Dowloads. One was FirefoxPatch.exe and the other was FirefoxPatch (1) .exe. I noticed others have problems with the "patches". Please give me a detailed explanation of why it happened and how you ensure that I WON'T receive any Trojan infection in the future. We always clear history run a cleaning disc and run Malwarebytes Anti-Malware. FYI, if the explanation is not satisfactory for me, my work, CIT, and my daughter-in-law who is the Cloud Manager Advanced Services of the Web host company; with the guarantee that this kind of problem is fixed or any patch of Firefox will not allow an incident of this magnitude happening again, I will look for a NEW provider of web browser.
  Concerning

  shipley_f said

  Wednesday 16 December 2015 my AVG Internet Security scan weekly all computer has notified me that I had 2 horse of Trojan Inject3/SGL on C:\Users\Administrator\Dowloads. One was FirefoxPatch.exe and the other was FirefoxPatch (1) .exe. I noticed others have problems with the "patches". Please give me a detailed explanation of why it happened and how you ensure that I WON'T receive any Trojan infection in the future.

  Mozilla.org or the web browser Firefox has something to do with this false FirefoxPatch.exe, FAKE Yes.

  Mozilla is alone in that Firefox updates internally in Firefox (using a file .mar) or download from www.mozilla.org and www.mozilla.org/firefox/all

  Firefox is not only for Windows but also Mac OSX and Linux, so updates are not made through a .exe, especially not those served of sites chosen at random outside mozilla.org.

  So-called FirefoxPatch .exe is recent (was showing upward for round 1 1/2 to 2 months now) crooks are used to feed less experienced Windows and or Firefox users to convince them it is an update for Firefox when it's really something that can install the nasty CryptoLocker under Windows if the person starts this fake firefoxpatch .exe.

  If its possible you and or someone downloaded this file twice at some point and then forgot about if everything goes well and not actually run this .exe.

• 42 Firefox firefox.exe leash * 32 process open after it is closed

  Every time I close Firefox 42.0 it leave a firefox.exe * 32 open process. If I open & close Firefox 10 times, I'll have 10 occurrences in the Windows Task Manager. They are always different sizes. Using Windows 7.

  Solved. Free Download Manager extension is causing the problem. Disable it and not more than left - open Firefox process.

• FF ver. 42.0, same-safe-mode: very often crash on INT3 in plugin - container.exe (continued)

  More detailed call stack (note that it is not wise to limit the types of attachments just by images: convenient plain text sometimes too).

  ====================================================

  Context:

  ====================================================

  00B8ED41 push eax
  00B8ED42 push 0B9705Ch
  00B8ED47 call dword ptr ds: [0B961C0h]
  00B8ED4D add esp, 10: 00
  00B8ED50 int 3

  ====================================================

  After this accident LoadLibrary() API LoadLibraryEx() normal operation until the reboot xul.dll remains locked by unknown process. This is why Crash reporter may not send report immediately; sending report becomes available only through to the subject: breaks down when additional annotations are impossible.
  After this fault system graphic API are spoiled at the global level (garbage in open windows headers).
  All derivatives of the CHtmlView windows class (even belong to the applications started prior to this accident) show content empty until you restart.
  Fault held 1st time on some Web pages may not be not occure on the same page after the reboot.
  Given that this fault that happens on pages not barely loaded by stream (p. ex-e-mailing service Web interfaces),.
  Looks problem either cumulative or garbage in constructor. Moreover, it may be a fruitless attempt
  Cancel recording of registration of SRI for INT3 transformation or premature of this international search report before the real necessity for its use
  (i.e. the problem of synchronization).

  More detailed call stack:

  ====================================================

  > mozglue.dll! 00b8ed50)

     xul.dll!106345af()
     ntdll.dll!7c910435()
     ntdll.dll!7c91043e()
     ntdll.dll!7c910435()
     ntdll.dll!7c91043e()
     ntdll.dll!7c913a5e()
     ntdll.dll!7c910460()
     ntdll.dll!7c913b1f()
     ntdll.dll!7c913aeb()
     ntdll.dll!7c90cf7a()
     kernel32.dll!7c809b42()
     kernel32.dll!7c809b59()
     ntdll.dll!7c90cf7a()
     kernel32.dll!7c809b42()
     kernel32.dll!7c809b59()
     kernel32.dll!7c809b09()
     ntdll.dll!7c90cf7a()
     kernel32.dll!7c809b42()
     kernel32.dll!7c809b59()
     ntdll.dll!7c90d39a()
     kernel32.dll!7c809bcf()
     ntdll.dll!7c90cf7a()
     kernel32.dll!7c809b42()
     kernel32.dll!7c809b59()
     ntdll.dll!7c90d39a()
     kernel32.dll!7c809bcf()
     kernel32.dll!7c809b99()
     ntdll.dll!7c90f65c()
     ntdll.dll!7c90f661()
     kernel32.dll!7c809430()
     kernel32.dll!7c801a1c()
     kernel32.dll!7c80189c()
     xul.dll!1082ae6c()
     ntdll.dll!7c90f65c()
     ntdll.dll!7c90f661()
     mozglue.dll!00b846aa()
     mozglue.dll!00b84724()
     xul.dll!107fd4ad()
     xul.dll!109ad3bb()
     xul.dll!109a1c13()
     xul.dll!106d6b3a()
     xul.dll!109a19ae()
     xul.dll!100dbd61()
     xul.dll!10447c22()
     xul.dll!10447ce2()
     xul.dll!104484d8()
     xul.dll!104489cb()
     xul.dll!1084c4dd()
     xul.dll!1052cf30()
     kernel32.dll!7c80b729()
  

  ====================================================

  "plugin - container.exe": load ' C:\Program Files\Mozilla Firefox\plugin - container.exe', no symbols loaded. "
  "plugin - container.exe': Loaded 'C:\WINDOWS\system32\ntdll.dll', no symbols loaded."
  "plugin - container.exe': 'C:\WINDOWS\system32\kernel32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\winmm.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\advapi32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\rpcrt4.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\secur32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\gdi32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\user32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\imm32.dll', no symbols loaded load."
  "plugin - container.exe': loaded"C:\Program Files\Mozilla Firefox\xul.dll", no charge symbol."
  "plugin - container.exe': loaded"C:\Program Files\Mozilla Firefox\icuin55.dll", no charge symbol."
  "plugin - container.exe': loaded"C:\Program Files\Mozilla Firefox\icuuc55.dll", no charge symbol."
  "plugin - container.exe': loaded"C:\Program Files\Mozilla Firefox\icudt55.dll", no charge symbol."
  "plugin - container.exe': loaded"C:\Program Files\Mozilla Firefox\msvcr120.dll", no charge symbol."
  "plugin - container.exe': loaded"C:\Program Files\Mozilla Firefox\msvcp120.dll", no charge symbol."
  "plugin - container.exe': loaded"C:\Program Files\Mozilla Firefox\nss3.dll", no charge symbol."
  "plugin - container.exe': 'C:\WINDOWS\system32\wsock32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\ws2_32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\msvcrt.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\ws2help.dll', no symbols loaded load."
  "plugin - container.exe': loaded"C:\Program Files\Mozilla Firefox\mozglue.dll", no charge symbol."
  "plugin - container.exe': 'C:\WINDOWS\system32\version.dll', no symbols loaded load."
  "plugin - container.exe': loaded"C:\Program Files\Mozilla Firefox\sandboxbroker.dll", no charge symbol."
  "plugin - container.exe': loaded"C:\Program Files\Mozilla Firefox\lgpllibs.dll", no charge symbol."
  "plugin - container.exe': 'C:\WINDOWS\system32\netapi32.dll', no symbols loaded load."
  "plugin - container.exe': loaded"C:\WINDOWS\system32\shell32.dll", no charge symbol."
  "plugin - container.exe': 'C:\WINDOWS\system32\shlwapi.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\usp10.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\ole32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\msimg32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\iphlpapi.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\uxtheme.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\setupapi.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\wintrust.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\crypt32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\msasn1.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\imagehlp.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\wtsapi32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\winsta.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\oleaut32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\pdh.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\comdlg32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.6028_x-ww_61e65202\comctl32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\odbc32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\odbcbcp.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\odbcint.dll', no symbols loaded load."
  "plugin - container.exe': Loaded 'C:\Program Files\Yandex\Punto Switcher\pshook.dll', no symbols loaded."
  "plugin - container.exe': 'C:\WINDOWS\system32\Macromed\Flash\NPSWF32_19_0_0_245.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\wininet.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\normaliz.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\urlmon.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\iertutil.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\dsound.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\dinput8.dll', no symbols loaded load."
  "plugin - container.exe": 'C:\WINDOWS\system32\mscms.dll', no symbols loaded load. "
  "plugin - container.exe': 'C:\WINDOWS\system32\winspool.drv', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\psapi.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\rsaenh.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\clbcatq.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\comres.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\mlang.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\schannel.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\userenv.dll', no symbols loaded load."
  "plugin - container.exe": load ' C:\WINDOWS\system32\MSCTFIME. " IME', no symbols loaded.
  "plugin - container.exe': 'C:\WINDOWS\system32\icm32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\wdmaud.drv', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\msacm32.drv', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\msacm32.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\midimap.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\d3d9.dll', no symbols loaded load."
  "plugin - container.exe': 'C:\WINDOWS\system32\d3d8thk.dll', no symbols loaded load."
  Unhandled exception at 0x00b8ed50 in plugin - container.exe: User breakpoint.

  Hello

  I'm glad to hear that your problem has been resolved. If you haven't already done so, please select the answer that solved the problem. This will help other users with similar problems more easily find the solution.

  Please contact the Mozilla Support.

• Firefox.exe APPCRASH associated ntdll.dll, even after clean install

  Hello, I have problems with Firefox crashes immediately after clicking on its icon.

  Firefox version is 41.0.2.5765, Windows exception code c0000005 (000497e8) the defective module ntdll.dll, version 6.3.9600.18007.

  Safe mode, the profile manager crashes too. I tried to do a fresh install which did not help...
  After that, I deleted my profile files, deleted temporary files, reinstalled Firefox, restarted the PC - problem persists.

  Unfortunately no newspaper is registered by Firefox.exe after the accident (folder/APPDATA/Roaming/Mozilla is empty).
  PC works fine otherwise.

  Windows error message reads:

  APPCRASH
  Firefox.exe
  41.0.2.5765
  561ee543
  ntdll.dll
  6.3.9600.18007
  55c4bc8e
  c0000005
  000497e8
  6.3.9600.2.0.0.256.48
  1029
  960C
  960cdc3073e4fd67c6d545df9e9d24cc
  7B3B
  7b3b9c2d872f7c0e875a33d7ebb7c470

  Thanks for any help!

  If the problem has been fixed. For all those who might happen to fall on this post:

  Firefox crash is caused by a problem of compatibility between Anti-Exploit Malwarebytes and Kaspersky Anti-virus. This problem has been resolved already my Malwarebytes sometime there are, but a recent update of Kaspersky AV brought. Can be solved by installing the latest beta version of Malwarebytes (1.08).

  To identify this issue I used this guide:
  https://support.Microsoft.com/en-us/KB/929135

• DfVuBrowserPlugin.exe will not run on 64-bit v.41. reports restaur頳era file corrupted - it works on old Xp

  I used LizardTech DjVuBrowserPlugin50.exe on my old XP PC and recently tested on a laptop.
  My new PC has 64-bit Firefox 41 and using 'install module file' produces a message saying
  "This add-on has not been not installed because she seems to be corrupted.

  The answer is to put npdjvu.dll in the Mozilla Firefox plugins directory, then turn it back on. Open the menu (the right hand of the menu bar icon), and then select Add-ons. Scroll to Viewer DjVu Plugin and change the "Application activation" status to "always enable".
  Have had no problems since, while I installed LizardTech Djvu Solo and DjVu Control, which contains DjVuViewer.exe

• I've updated Firefox, another file (exe type) have also downloaded. There is no exact date, just the day. I can't open it.

  This is the file: https://s3.amazonaws.com/turbo-bundles/windows/e3231ef3418f60951e7d0ff44ed9f476/TurboYourPC_Setup.exe
  Can you help me to explain what it's for? I have a lot of problems with changes apparently not allowed in my computer settings.

  Looks like you fell for a fake update notification. Do not attempt to install this TurboYourPC_Setup.exe program, it may be malicious.

• Mozzilla not respounding high cpu use plugin - container.exe computer is totally locked

  I start up firefox, and go new. Sometimes it allows me to watch for a while. without warning mozilla not respounding computer is completely locked. I try to stop the program (mozilla) sometimes it allows me, and other times it takes several tries to stop. Mozilla said plugin - container.exe CPU high usage. Happened several times in recent weeks. I updated several times without success.

  Like most of the commonly used web plugin, Flash is the most likely the cause. I don't know why the problems increased with Flash with the combination of Firefox 41 and 19 Flash. I think that people who work.

  For now, I suggest the following to minimize potential problems with Flash in your troubleshooting:

  (1) to avoid unnecessary pain on the sites where the Flash is not really essential, try to set the Flash on Click-to-Play (Ask 'activation'). This will delay the Flash start on a page, until you approve.

  To set 'Ask to activate', open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

  With this setting, when you visit a site that wants to use the Flash, you should see a notification icon in the address bar and usually (but not always) one of the following values: a link in a gray rectangle dark in the page or an information bar sliding between the toolbar and in the page area.

  The plugin notification in the address bar icon usually resembles a little Lego block, dark gray. (If it is red, Flash must update.)

  The delay in the activation of Flash can help distinguish between the problems caused on the initial page load, put in folds and script activation vs Flash/loading bar.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the notification icon in the address bar to allow Flash. You can trust the site for the time being or permanently.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification! He will just stand here in case you want to use it later.

  (2) consider rolling back at the end of the extended support of Flash 18. We make the security updates, which you can find if you scroll down half way down this page: https://www.adobe.com/products/flashplayer/distribution3.html - it's for plugin-based browsers, MSI or EXE format should work.

  Most likely, you need to remove Flash 19 before this installer works. This article has a link to the uninstaller program: https://helpx.adobe.com/flash-player/.../uninstall-flash-player-windows.html.

• I tried to install firefox.exe in silence, I used this command. @start/wait "Firefox Setup Stub 40.0.3.exe" - ms, but I encounter not found error - ms

  @ECHO.
  @ECHO Firefox installation
  @start/wait "Firefox Setup Stub 40.0.3.exe" - ms

  COR - el that it works! Thank you very much for the help!

  @Start/wait "Firefox" "Setup C:\TMP\Firefox 40.0.3.exe" - ms