fetch multiple records form

How to write a fetch statement that retrieves multiple records and allow users scroll record 1/3,2/3, 3/3... in the form? I'm not using built in the declaration of add\update\fetch

example: table seller

number of seq_no (PK);
vendor_id number;
date of call_date;
issue_asked varchar2 (50);

When I type in the vendor_id, I want to implement the documents associated to the id in the form. I think I might just need a few meter and loop to increase select it in the statement, but I'm not sure how yet or are there any built in can I use under apex? can u help?

Munshar

Do you need to be able to update the tables or only the subtable? If it is only the 'CALLS' table you might create a normal report for sellers and a tabular presentation of the calls. Add a link to the seller's report to display the form as a table for this provider.

Tags: Database

Similar Questions

Reading time to fetch multiple records vs. single record

Hi all

I have an application where I need to get several records, I use an SMU-5185, and basically, the problem is that it takes too long to retrieve multiple records, I did a test to measure the time it takes for the reading of the hole 32 MB of data and results.

Parameters:

Records to Fetch = 8192 (maximum 1 page = 4 KB, 8192 Records = 32 MB)

Fetch time = 1100 ms

Records to Fetch = 1

Samples to Fetch = (2 ^ 25-1500) = 32MB

Fetch time = 70 ms

So, I want to know why it takes more time to get the multiplerecords if both are reading the same amount of data? Is there something I can do to decrease the recovery time?

Thank you

Hi Rodrigo,

In fact, I think that the rate of release should be out of the equation, as in the while loop I wait until the end of the acquisition,

You're absolutely right, I apologize for this oversight.

I'm you test your code and see several times (about 930ms) Fetch when only pick a channel. As soon as I specified two channels, the recovery time is an order of magnitude smaller (around 90ms). Change the sampling frequency, fetch timeout and record length do not seem to affect this disparity in the order of magnitude.

So to reiterate:

In the case of single record , changing from one channel to both channels double recovery time. It's what I expect.

In the case of multi recording , changing from one channel to both channels decreases the time of recovery by an order of magnitude. I don't think that.

Furthermore, when I test in the example shipping niScope EX Acquisition configured standard I do not see this effect.

(1) can you confirm that, in the case of multi account for your tests, you see that the recovery time reduced when you specify two channels instead of one?

(2) can you confirm that you are not able to replicate that in the example Acquisition set up ?

I have tabled a CAR 350194 to address this behavior more with R & D, but unfortunately I can't promise a timeline for the resolution. I recommend at this stage unless you change Acquisition is configured when you set up your code instead of starting from scratch. Support at home OR you can call at any time to check the condition of this CAR.

To answer your question of why a use case takes more time than another, it will take more time to study according to the guidelines of this CAR. We have already mentioned there is some overhead involved with multi-record fetch, but whether or not the time more or less long you see are good times is something that R & D will have to answer.

Please let me know if you can confirm what I see by testing.

-Andrew

Insert multiple records in a form with checkboxes
Hello

I need to insert multiple records in a database of a form using Coldfusion and am stuck - it works correctly when inserting one record at a time. Basically, the user will choose their name of the employee (EmployeeID) in a dynamic list, then several session (open) numbers that represent classes of training.

When I try and select several check boxes, I get this error:
"The number of query values and destination fields is not the same."

The boxes of the open field are not dynamic, as you can see-how use CFLOOP or any other method to allow several checkboxes be selected, and all open documents is entered into the database on a form?

I used server behaviors Dreamweaver 8 to create the form - which is limiting I know but I'm not a coder. I hope I can add code here to do things correctly function.

----APPLICATION CODE------------------------------------------------------------------

<!-get employee names->
< cfquery name = "rsDisplayEmployee" datasource = "FormationRH" >
SELECT *.
OF tblEmployees
ORDER BY LastName ASC < / cfquery >

<! - insert Records - >
< cfset CurrentPage = GetFileFromPath (GetTemplatePath ()) >
< cfif IsDefined "(FORM. MM_InsertRecord") AND the FORM. MM_InsertRecord EQ 'form1' >
< cfquery datasource = "FormationRH" >
INSERT INTO tblEnrollments (open, EmployeeID)
VALUES)
< cfif IsDefined "(FORM. Open") AND #FORM. Open # NEQ "" > "".
#FORM. Open #.
< cfelse >
NULL VALUE
< / cfif >
,
< cfif IsDefined "(FORM. EmployeeID") AND #FORM. EmployeeID # NEQ "" > "".
#FORM. EmployeeID #.
< cfelse >
NULL VALUE
< / cfif >
) < / cfquery >
< cflocation url = "2.cfm" >
< / cfif >


--------FORM CODE-----------------------------------------------------------------------

< form action = "" < cfoutput > #CurrentPage # < / cfoutput > "id = 'form' name ="form"method ="POST">"
< table width = "100%" border = "0" cellspacing = "0" cellpadding = "4" >
< b >
< td width = "100%" > < h2 > < strong > select an employee name < facilities > < / h2 > < table >
< /tr >
< b >
< td > < select name = "EmployeeID" >
< cfoutput query = "rsDisplayEmployee" >
< option value = "#rsDisplayEmployee.EmployeeID #" > #rsDisplayEmployee.LastName #, #rsDisplayEmployee.FirstName # < / option >
< / cfoutput >
< / select > < table >
< /tr >
< /table >
< h2 > < strong > select training class < facilities > < / h2 >
< table width = "600" border = "0" cellspacing = "0" cellpadding = "0" >
< b >
< td width = "227" valign = "top" > class < table >
< td width = "373" valign = "top" > < input name = "Open" type = "checkbox" value = "937" / >
Date < table >
< /tr >
< b >
< td valign = "top" > class < table >
< td valign = "top" > < label >
< input name = "Open" type = "checkbox" value = "936" / >
< / label >
Date < table >
< /tr >
< /table >
< br / >
< input type = "submit" name = "Submit" value = 'Sign Up!' / >
< input type = "hidden" name = "MM_InsertRecord" value = "form" >
< / make >

"Add a line" I want to say that, for each of the checkboxes selected in your form, the code will be to insert a new record in the database table. Sorry I probably didn't phrase it very well.

so, no, the code does not need to wrap around each element. Instead the code examines the form.fieldnames variable (form.fieldnames, which is a list separated by commas of all fields defined in the form, is automatically submitted to each form submission - you don't have to define yourself somehow) and for each selected checkbox will insert a new record in your table with the check box selected and selected value the value of the id of the employee.

How to view multiple records to a report form - as the model?
Hi all
I developed a form - like model report
I want to show him several records at once (on the same page)
I tried assigning a value of "Maximum records per page" property for the extensible framework 10
but when I close the range property and open it again the value returns to 1!
How to display multiple records on the same page?

Thank you
Hello

check around your formatting images if all have the "vertical stretch" value to the variable or develop.

Insert multiple record Oracle forms 6i/9i / 10g
Hello

How can I insert multiple record using a tabular view as an oracle.

what I use for loop?

can someone help me? I have kindda stuck in this problem...

Scenario:
I have 5 display of last_name text_item and I put 4 names on it...

If I use Insert, it only get the 4th name I drove...

question:
How can I put them all together?
I build the block manually.

Not a very good idea, I think, but if you really want to do it this way, you will need to loop through the records:
```
first_record;
<>
loop
   insert into ....
   exit when :system.last_record = 'TRUE';
   next_record;
end loop record_loop;
```

5152. multiple record acquisition forever

Is it possible to do a multiple record acquisition on the 5152, which itself will be automatically retrigger forever?

I have currently a multiple record acquisition implemented to acquire 256 records, but the external triggers (using the TRIG BNC of input) are so close together that the software cannot rearm the coverage in time for the next acquisition, and some triggers are missed.

For example, we are capture 8000 samples to 2 MS/s, if every record is 4 ms in duration. The external trigger occurs at the beginning of all of the records, with a period of 4 ms, so I essentially continuous. Each 256 files (about once per second), the LabVIEW VI transfers data in memory, he wrote on the disk, it displays on the front panel, etc, then re - the scope for the next acquisition of weapons. It would be ideal that the scope can be configured for the immediate release of an another multiple record acquisition (preferably in hardware), so that it could acquire in parallel with LabVIEW treatment files and write data to the disk.

Any thoughts on how I might accomplish this?

Hi Schrockwell,

There is no way to make a Multi-Multi Record Acquisition.

What you want to do, the short answer is Yes - there is a way to introduce within the finished construction of the API OR-SCOPE, but you should make sure that

1. you must enable more Records than available memory

2. you must set the number of records in very huge. Since this value is an Int32, theoretically, the more important you can set avalue of about 2.15 billion (2 ^ 31-1). After that, you must stop and restart your acquisition.

The total time that the acquisition will continue for is:

= Total number of records [#] acquisition [s] Total time / Trigger rate [Hz]

3. Finally, you should make sure that you can endure the flow in your PXI/PCI bus, and you have designed your code effectively to support this.

Two important things I noticed is that you decide to display data on a chart, and you write on a disc. View data in a graph will lead your program last much longer the complete loop iteration - instead, try rΘcupΦre without display data. Secondly - if you write to a disc, you must use queuesto do.

If you already do this, then the question of highest level, it's whether or not you are supplying data on your digitizer. If so, you must work around this problem so that there is no backlog of data. The extraction flow (data transferred in your program using the Fetch function) must be equal to your Flow of Acquisition:

Acquisition flow [B/s]

= Number of samples per registration type [Sa/REC/WAV] * rate [Hz] * resolution digitizer [bytes / his]

(Since the 5152 is a 8-bit digitizer, the resolution of your digitizer is 1 b/sample).

If you can compare your speed of recoveryand who then subtract the acquisition flowcalculation, then you should see a number (in B/s) which reflects the speed at which you are supplying data. For an acquisition to keep forever, this number must be virtually zero.

I hope this helps,

-Andrew

Selection multiple-oracle forms 6

The power of groups Record - Oracle Developer forms Techniques
as Figure 2.7. Selection of several departments.
Which can provide type Demo.FMB me?

thx.......................

Take a look at this URL: forms: how to select multiple records in a block by using the folder groups. This demo was written in Oracle Forms 10 g, but when I created the original REC_GROUP package I was using Forms 6i and this demo does not work in Forms 6i. You will not be able to use the included CRAIG.pll so just to create the REC_GROUP package in your form instead.

I hope this helps.

Craig...

Update multiple records at once

First, thank you very much the people who have helped me out several times now. I put things together and came across another issue of 'beauty' begin as follows. In the previous topics, I had a way to get to an array of automated classification based on the inputs of a fixtures table and some simple calculations. Now, which has been accomplished which resulted in me having to update all the teams by simply clicking a button.

As you can see in the code below, using a table with every row a form, at the end of the line, there is a button called 'OK' I have to push to update the record according to. A repeat region for all teams in this query shows the ranking of 'new', but is not yet inserted in the League table. Is it possible to have this repeat region without having to push 18 or 20 times a button update? At the end of the table, one (1) button update all records? The primary key is composed like this ' 0000 - u00a "(4 numéros un tiret puis un «u» 1 ou 2 numéros et 1 ou 2 lettres à nouveau)."

<?php require_once('Connections/connection.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "") 
{
  $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;

  $theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);

  switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;    
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
  }
  return $theValue;
}
}

$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
  $editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
}

if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "klassement")) {
  $updateSQL = sprintf("UPDATE klassement SET wedstrijden=%s, overwinning=%s, verlies=%s, gelijkspel=%s, goalsvoor=%s, goalstegen=%s, goalverschil=%s, punten=%s WHERE ploegid=%s",
                       GetSQLValueString($_POST['wedstrijden'], "int"),
                       GetSQLValueString($_POST['overwinning'], "int"),
                       GetSQLValueString($_POST['verlies'], "int"),
                       GetSQLValueString($_POST['gelijkspel'], "int"),
                       GetSQLValueString($_POST['goalsvoor'], "int"),
                       GetSQLValueString($_POST['goalstegen'], "int"),
                       GetSQLValueString($_POST['goalverschil'], "int"),
                       GetSQLValueString($_POST['punten'], "int"),
                       GetSQLValueString($_POST['ploegid'], "text"));

  mysql_select_db($database_koscw, $koscw);
  $Result1 = mysql_query($updateSQL, $koscw) or die(mysql_error());

  $updateGoTo = "klassement-ploegen.php?reeksid=" . $row_klassement['reeksid'] . "";
  if (isset($_SERVER['QUERY_STRING'])) {
    $updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
    $updateGoTo .= $_SERVER['QUERY_STRING'];
  }
  header(sprintf("Location: %s", $updateGoTo));
}

if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "") 
{
  if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
  }

  $theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);

  switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;    
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
  }
  return $theValue;
}
}

$reeks_klassement = "-1";
if (isset($_GET['reeksid'])) {
  $reeks_klassement = $_GET['reeksid'];
}
mysql_select_db($database_koscw, $koscw);
$query_klassement = sprintf("select * from klassement where reeksid = %s order by status asc, punten desc, overwinning desc, goalverschil desc", GetSQLValueString($reeks_klassement, "text"));
$klassement = mysql_query($query_klassement, $koscw) or die(mysql_error());
$row_klassement = mysql_fetch_assoc($klassement);
$totalRows_klassement = mysql_num_rows($klassement);

$id_reeks = "-1";
if (isset($_GET['reeksid'])) {
  $id_reeks = $_GET['reeksid'];
}
mysql_select_db($database_koscw, $koscw);
$query_reeks = sprintf("select reeksnaam from reeksen where reeksid = %s", GetSQLValueString($id_reeks, "text"));
$reeks = mysql_query($query_reeks, $koscw) or die(mysql_error());
$row_reeks = mysql_fetch_assoc($reeks);
$totalRows_reeks = mysql_num_rows($reeks);

mysql_select_db($database_koscw, $koscw);
$query_seizoen = "select * from seizoen";
$seizoen = mysql_query($query_seizoen, $koscw) or die(mysql_error());
$row_seizoen = mysql_fetch_assoc($seizoen);
$totalRows_seizoen = mysql_num_rows($seizoen);

$huidig=$row_seizoen['huidigseizoen'];
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<link rel="stylesheet" type="text/css" media="all" href="../_styles/koscw-admin.css" />
<title>Klassement <?php echo $row_reeks['reeksnaam']; ?> | Beheerpaneel | 1349</title>
</head>
<body>
<div id="container">
<h1 class="overzichth1">Klassement <?php echo $row_reeks['reeksnaam']; ?></h1>
<?php if ($totalRows_klassement > 0) { // Show if recordset not empty ?>
<table cellpadding="5" cellspacing="0" border="0" id="klassement">
<tr>
  <td class="klassementsmall bgccc bold"></td>
       <td class="klassementteam bgccc bold">Ploegnaam</td>
       <td class="klassementsmall bgccc bold">+</td>
       <td class="klassementsmall bgccc bold">-</td>
       <td class="klassementsmall bgccc bold">=</td>
      <td class="klassementsmall bgccc bold">#</td>
       <td class="klassementsmall bgccc bold"><img src="../_img/goalsmade.png" alt="Goals +" /></td>
       <td class="klassementsmall bgccc bold"><img src="../_img/goalsagainst.png" alt="Goals -" /></td>
       <td class="klassementsmall bgccc bold"><img src="../_img/goalsdifference.png" alt="Goals &asymp;" /></td>
       <td class="klassementsmall bgccc bold">PTN</td>
      <td class="klassementsmall bgccc"> </td>
</tr>
<?php
$i=0;
do {
$i++;
if($i % 2) { //this means if there is a remainder
     echo "<tr class=\"calendareven\">";
} else { //if there isn't a remainder we will do the else
     echo "<tr class=\"calendarodd\">";
}
?>
<td>
<?php
$rank += 1;
echo $rank;
?>      </td>
       <td class="klassementteam">
          <?php
        $thuisploeg=$row_klassement ['ploegid'];
          $sql_select_thuisploeg="select ploegnaam from ploegen where ploegid = ('$thuisploeg')";
          $resultset_thuisploeg=mysql_query($sql_select_thuisploeg);
          while ($data_thuisploeg=mysql_fetch_array($resultset_thuisploeg)) 
          {echo $data_thuisploeg['ploegnaam'] . " ";}?></td>
       <form action="<?php echo $editFormAction; ?>" method="POST" name="klassement">
      <input type="hidden" name="ploegid" value="<?php echo $row_klassement ['ploegid']; ?>" />
       <td>
      <?php
       $tw=$row_klassement['ploegid'];
       $sql_select_tw="SELECT COUNT( * ) AS twin FROM kalender WHERE seizoen = '$huidig' AND speeldag !=0 AND thuisploegid = '$tw' AND thuisploeggoals > bezoekersgoals";
       $resultset_tw=mysql_query($sql_select_tw);
       $data_tw=mysql_fetch_array($resultset_tw);
       $data_tw['twin'];
       
       $uitwin=$row_klassement['ploegid'];
       $sql_select_uitwin="SELECT COUNT( * ) AS awin FROM kalender WHERE seizoen = '$huidig' AND speeldag !=0 AND bezoekersid = '$uitwin' AND thuisploeggoals < bezoekersgoals";
       $resultset_uitwin=mysql_query($sql_select_uitwin);
       $data_uitwin=mysql_fetch_array($resultset_uitwin);
       $data_uitwin['awin'];
       
       $win=($data_tw['twin'])+($data_uitwin['awin']);
       ?>
      <input type="text" name="overwinning" value="<?php echo $win; ?>" class="inputscore" readonly="readonly" />
      </td>
       <td>
      <?php
       $tv=$row_klassement['ploegid'];
       $sql_select_tv="SELECT COUNT( * ) AS tver FROM kalender WHERE seizoen = '$huidig' AND speeldag !=0 AND thuisploegid = '$tv' AND thuisploeggoals < bezoekersgoals";
       $resultset_tv=mysql_query($sql_select_tv);
       $data_tv=mysql_fetch_array($resultset_tv);
       $data_tv['tver'];
       
       $uitverlies=$row_klassement['ploegid'];
       $sql_select_uitverlies="SELECT COUNT( * ) AS aver FROM kalender WHERE seizoen = '$huidig' AND speeldag !=0 AND bezoekersid = '$uitverlies' AND thuisploeggoals > bezoekersgoals";
       $resultset_uitverlies=mysql_query($sql_select_uitverlies);
       $data_uitverlies=mysql_fetch_array($resultset_uitverlies);
       $data_uitverlies['aver'];
       
       $ver=($data_tv['tver'])+($data_uitverlies['aver']);
       ?>
      <input type="text" name="verlies" value="<?php echo $ver; ?>" class="inputscore" readonly="readonly" />
      </td>
       <td>
      <?php
       $thuisdraw=$row_klassement['ploegid'];
       $sql_select_thuisdraw="SELECT COUNT( * ) AS tdraw FROM kalender WHERE seizoen = '$huidig' AND speeldag !=0 AND thuisploegid = '$thuisdraw' AND thuisploeggoals = bezoekersgoals";
       $resultset_thuisdraw=mysql_query($sql_select_thuisdraw);
       $data_thuisdraw=mysql_fetch_array($resultset_thuisdraw);
       $data_thuisdraw['tdraw'];
       
       $awaydraw=$row_klassement['ploegid'];
       $sql_select_awaydraw="SELECT COUNT( * ) AS adraw FROM kalender WHERE seizoen = '$huidig' AND speeldag !=0 AND bezoekersid = '$awaydraw' AND thuisploeggoals = bezoekersgoals";
       $resultset_awaydraw=mysql_query($sql_select_awaydraw);
       $data_awaydraw=mysql_fetch_array($resultset_awaydraw);
       $data_awaydraw['adraw'];
       
       $draw=($data_thuisdraw['tdraw'])+($data_awaydraw['adraw']);
       ?>
      <input type="text" name="gelijkspel" value="<?php echo $draw ?>" class="inputscore" readonly="readonly" />
      </td>
      <td>
      <?php $wedstrijden=$win+$ver+$draw; ?>
      <input type="text" name="wedstrijden" value="<?php echo $wedstrijden; ?>" class="inputscore" readonly="readonly" />
      </td>
       <td>
       <?php
      $tgv=$row_klassement ['ploegid'];
       $sql_select_tgv="SELECT SUM( thuisploeggoals ) AS tgv1 FROM kalender WHERE seizoen = '$huidig' AND speeldag !=0 AND thuisploegid = '$tgv'";
       $resultset_tgv=mysql_query($sql_select_tgv);
       $data_tgv=mysql_fetch_array($resultset_tgv);
       $data_tgv['tgv1'];

      $ugv=$row_klassement ['ploegid'];
       $sql_select_ugv="SELECT SUM( bezoekersgoals ) AS ugv1 FROM kalender WHERE seizoen = '$huidig' AND speeldag !=0 AND bezoekersid = '$ugv'";
       $resultset_ugv=mysql_query($sql_select_ugv);
       $data_ugv=mysql_fetch_array($resultset_ugv);
       $data_ugv['ugv1'];

       $gv=($data_tgv['tgv1'])+($data_ugv['ugv1']);
       ?>
      <input type="text" name="goalsvoor" value="<?php echo $gv; ?>" class="inputscore" readonly="readonly" />
      </td>
       <td>
       <?php
      $tgt=$row_klassement ['ploegid'];
       $sql_select_tgt="SELECT SUM( thuisploeggoals ) AS tgt1 FROM kalender WHERE seizoen = '$huidig' AND speeldag !=0 AND bezoekersid = '$tgv'";
       $resultset_tgt=mysql_query($sql_select_tgt);
       $data_tgt=mysql_fetch_array($resultset_tgt);
       $data_tgt['tgt1'];

      $ugt=$row_klassement ['ploegid'];
       $sql_select_ugt="SELECT SUM( bezoekersgoals ) AS ugt1 FROM kalender WHERE seizoen = '$huidig' AND speeldag !=0 AND thuisploegid = '$ugv'";
       $resultset_ugt=mysql_query($sql_select_ugt);
       $data_ugt=mysql_fetch_array($resultset_ugt);
       $data_ugt['ugt1'];

       $gt=($data_tgt['tgt1'])+($data_ugt['ugt1']);
       ?>      
      <input type="text" name="goalstegen" value="<?php echo $gt; ?>" class="inputscore" readonly="readonly" />
      </td>
       <td>
       <?php $goals=$gv-$gt; ?>
      <input type="text" name="goalverschil" value="<?php echo $goals; ?>" class="inputscore" readonly="readonly" />
      </td>
       <td>
       <?php $punten=($win*3)+($draw*1); ?>
      <input type="text" name="punten" value="<?php echo $punten; ?>" class="inputscore" readonly="readonly" />
      </td>
      <td>
      <input type="submit" value="OK" />
      </td>
      <input type="hidden" name="MM_update" value="klassement" />
       </form>
  </tr>
  <?php } while ($row_klassement = mysql_fetch_assoc($klassement)); ?>
</table>
<?php } // Show if recordset not empty ?>

</div>
</body>
</html>
<?php
mysql_free_result($klassement);

mysql_free_result($reeks);

mysql_free_result($seizoen);
?>

Each record is separated, as well as a record can be updated at once, unless you want that all records have the same value.

To update multiple records in a single operation, you must send the form tabular data. You do this by adding an empty pair of brackets at the end of the name attribute of each entry on the form like this:

This translates by $_POST ['ploegid'] which contains a table of all IDS: $_POST ['ploegid'] [0], $_POST ['ploegid'] [1], $_POST ['ploegid'] [2] and so on. All the attributes of the repeat region name need to have added hooks. The following hidden field should be outside of the repeat region and may not have the brackets:

You can then use a loop for updating the values like this:

for ($j = 0, $len = count($_POST['ploegid']); $j < $len; $j++) {  $updateSQL = sprintf("UPDATE klassement SET wedstrijden=%s, overwinning=%s,   verlies=%s, gelijkspel=%s, goalsvoor=%s, goalstegen=%s, goalverschil=%s,   punten=%s WHERE ploegid=%s",                       GetSQLValueString($_POST['wedstrijden'][$j], "int"),                       GetSQLValueString($_POST['overwinning'][$j], "int"),                       GetSQLValueString($_POST['verlies'][$j], "int"),                       GetSQLValueString($_POST['gelijkspel'][$j], "int"),                       GetSQLValueString($_POST['goalsvoor'][$j], "int"),                       GetSQLValueString($_POST['goalstegen'][$j], "int"),                       GetSQLValueString($_POST['goalverschil'][$j], "int"),                       GetSQLValueString($_POST['punten'][$j], "int"),                       GetSQLValueString($_POST['ploegid'][$j], "text"));

  mysql_select_db($database_koscw, $koscw);  $Result1 = mysql_query($updateSQL, $koscw) or die(mysql_error());}

Several box insert as multiple records
I'm relatively new to ColdFusion. It's the simplicity, as well as Dreamweaver insert/update/delete assistants, have helped build clean enough applications for database insertion, recovery and deletion and display.

However, I have to be able to insert several selections of boxes as multiple records in a table, and I am running into problems. I guess this sort of thing is the premise of virtually any shopping cart out there, but I can't seem to find any good information on in my 'develop with CFMX manual' or my "Kit of Construction CFMX Web App" book or on the web also. (The only examples for the page of the form or the action page are a static box!)

The basic premise of what I'm trying to achieve:

The user is able to select different items in several boxes. (ITEM_ID)
This selection is associated with the user. (CUSTOMER_ID)
The selection is associated with a point in time as a year. (INSTANCE_ID)
These identification numbers that must all be inserted in a 3 column table expecting integers for ITEM_ID CUSTOMER_ID and INSTANCE_ID

Example of FORM values that would be passed: (147,148,149, 23445, 4) = (3 ITEM_IDs, CUSTOMER_ID and INSTANCE_ID)

Typical error on presentation to insert action page: Number of columns in reading / writing does not equal the number of values (which is normal, I am gathering several values via checkboxes).

How can I insert each box is selected as a separate record in the table?

Such as:
(147, 23445, 4)
(148, 23445, 4)
(149, 23445, 4)

My Code:

Form:

< are method = "post" name = "form2" action = "process_form_action_page.cfm" >

< table >

< cfoutput query = "Stored_Procedure1" >

< b >
< td > < input type = "checkbox" name = "ITEM_ID" value = "#Stored_Procedure1.ITEM_ID #" > < table >
#Stored_Procedure1.ITEM_TITLE # < td > < table >
< /tr >

< / cfoutput >

< /table >

< input type = "hidden" name = 'CUSTOMER_ID' value = '#CUSTOMERS. CUSTOMER_ID #">"
< input type = "hidden" name = "INSTANCE_ID' value = '#INSTANCE. INSTANCE_ID #">"
< input type = "submit" value = "Insert record" >

< / make >

«"" "Action page:»»"»

< cfquery datasource = "ORDERS" >

INSERT INTO PRODUCT_CUSTOMER (ITEM_ID, CUSTOMER_ID, INSTANCE_ID) VALUES)
< cfif IsDefined "(FORM. ITEM_ID") AND #FORM. NEQ ITEM_ID # "" > "".
#FORM. ITEM_ID #.
< cfelse >
NULL VALUE
< / cfif >
,
< cfif IsDefined "(FORM. CUSTOMER_ID') AND #FORM. NEQ CUSTOMER_ID # "" > "".
#FORM. CUSTOMER_ID #.
< cfelse >
NULL VALUE
< / cfif >
,
< cfif IsDefined "(FORM. INSTANCE_ID") AND #FORM. QNE INSTANCE_ID # "" > "".
#FORM. INSTANCE_ID #.
< cfelse >
NULL VALUE
< / cfif >
)

< / cfquery >
< / cfif >

Thank you!
I'm not not to take good advice. If I was a bit too "hard", I'm sorry... but at least I finally got a good response.

I realized what I wanted anyway. (Sabaidee, yours was the closest answer you to what I later came up with.) Thanks for the effort, I appreciate it. I will certainly implement your logic of to check if the box is checked).

What I came up with a solution:

147
148
149

INSERT INTO MyTABLE (CUSTOMER_ID, ITEM_ID, INSTANCE_ID)
VALUES (' #Form.CUSTOMER_ID # "," #Form.INSTANCE_ID # "," #Checked_ITEM # ")

If all of the check boxes are selected, the data is inserted as:

147, 23445, 4
148, 23445, 4
149, 23445, 4

(I realize that there is much more that can be embellished in the form page and the page of the processor).

validation against multiple records (section multiple registration)
How can I validate the records in a record Multiple point (3 files) against multiple records in a database? In other words, if they have previously registered (and is committed to the database) 'A', 'B' and 'C' and then try to enter "C", "D" and "E", a trigger failure will occur because 'C' is recognized as being already in the database. I'm already having control of duplicate records of subject "during a session" via the form, but does not prevent a user to re - enter and update a different record with the same value as one of the other documents submitted previously. Does make sense? I guess I could control it at the database level, making the the user_id AND primary keys of point value, but I want to control it until the user selects the button "Update".

This should check the records that are unique to that user only. Does make sense?
Mark,
You have a post request (PQ) trigger adding or modifying data when a record is being questioned? The when-validate-Item trigger (WVI) will run only when the State of the item is NEW or CHANGED. When you fill out your form with EXECUTE_QUERY(), the ITEM_STATUS should be query.

If you use a trigger of PQ, would be to reset the record and status of the article once you set your value in the trigger of PQ. For example:
```
   SET_ITEM_PROPERTY('MY_BLOCK.MY_ITEM', ITEM_IS_VALID, PROPERTY_TRUE);
```
Another option would be to set the status of all return to the QUERY.
```
  SET_RECORD_PROPERTY(:SYSTEM.trigger_record, STATUS, QUERY_STATUS);
```
I hope this helps.
Craig...

Web service PLSQL returning multiple records

Hello

I am creating a web service using oracle 11 g, which should be able to return multiple records.

Based on the code and the advice of the samples found on the internet, here is my code:

CREATE OR REPLACE TYPE test_rec is OBJECT (
    s_nume_adre                    NUMBER ,
    c_eta_civi                     VARCHAR2(4 BYTE),
    l_nom1_comp                    VARCHAR2(40 BYTE),
    l_nom2_comp                    VARCHAR2(40 BYTE),
    l_nom3_comp                    VARCHAR2(40 BYTE),
    l_pren_comp                    VARCHAR2(30 BYTE),
    d_date_nais                    DATE);


CREATE OR REPLACE TYPE test_array AS TABLE OF test_rec;
*/

CREATE OR REPLACE PACKAGE test_pkg AS
  function get_rows(snume_adre in number) return test_array;
END;
/

CREATE OR REPLACE PACKAGE BODY test_pkg AS
  function get_rows(snume_adre in number) return test_array is
    v_rtn   test_array := test_array(null);
    v_first boolean := true;

    cursor c_get_rows(snume_adre in number) is
      SELECT a.s_nume_adre,
             nvl(a.c_eta_civi, '') c_eta_civi,
             nvl(a.l_nom1_comp, '') l_nom1_comp,
             nvl(a.l_nom2_comp, '') l_nom2_comp,
             nvl(a.l_nom3_comp, '') l_nom3_comp,
             nvl(a.l_pren_comp, '') l_pren_comp,
             nvl(a.d_date_nais, to_date('01.01.1900', 'dd.mm.yyyy')) d_date_nais
    FROM bro.z45 a
  where a.s_nume_adre = snume_adre or snume_adre is null;

  begin
   
    for rec in c_get_rows(snume_adre) loop
      if v_first then
        v_first := false;
      else
        v_rtn.extend;
      end if;
   
    v_rtn(v_rtn.last) := test_rec(rec.s_nume_adre, rec.c_eta_civi, rec.l_nom1_comp, rec.l_nom2_comp,
                                rec.l_nom3_comp, rec.l_pren_comp, rec.d_date_nais);
    end loop;   

    return v_rtn;
  end;
END;
/

--select * from table (test_pkg.get_rows(null));

I am able to retrieve data using select.

However, when I try to access its wsdl I get an error:

< envelope soap: >

< soap: Body >

< soap: Fault >

Client: soap < faultcode > < / faultcode >

entry processing < faultstring > error < / faultstring >

< detail >

< OracleErrors > < / OracleErrors >

< / details >

< / soap fault: >

< / soap: Body >

< / envelope soap: >

-- -------------------------------------------------------------------------------------------------------------

If I comment the function call in the package declaration I get a "correct": wsdl

-- -------------------------------------------------------------------------------------------------------------

" < name definitions = targetNamespace"GET_ROWS"=" http://xmlns.Oracle.com/orawsv/test/TEST_PKG/GET_ROWS "xmlns =" http://schemas.xmlsoap.org/wsdl/ "xmlns:tns =" http://xmlns.Oracle.com/orawsv/test/TEST_PKG/GET_ROWS "container =" http://www.w3.org/2001/XMLSchema "xmlns:soap =" http://schemas.xmlsoap.org/wsdl/SOAP/ "> " ""

< types >

" < xsd: Schema targetNamespace = ' http://xmlns.Oracle.com/orawsv/test/TEST_PKG/GET_ROWS "elementFormDefault ="qualified"> "

< xsd: element name = "GET_ROWSInput" >

< xsd: complexType >

< / xsd: complexType >

< / xsd: element >

< xsd: element name = "GET_ROWSOutput" >

< xsd: complexType >

< / xsd: complexType >

< / xsd: element >

< / xsd: Schema >

< / types >

< name of message = "GET_ROWSInputMessage" >

< name of part = "parameters" element = "tns:GET_ROWSInput" / >

< / message >

< name of message = "GET_ROWSOutputMessage" >

< name of part = "parameters" element = "tns:GET_ROWSOutput" / >

< / message >

< portType name = "GET_ROWSPortType" >

< operation name = "GET_ROWS" >

< input message = "tns:GET_ROWSInputMessage" / >

< output message = "tns:GET_ROWSOutputMessage" / >

< / operation >

< / portType >

< connection name = "GET_ROWSBinding" type = "tns:GET_ROWSPortType" >

" < style: soap = transport = 'document' binding ' http://schemas.xmlsoap.org/SOAP/HTTP "/>

< operation name = "GET_ROWS" >

< soap: operation soapAction = "GET_ROWS" / >

< input >

< soap body parts: = 'settings' use = "literal" / >

< / Entry >

< output >

< soap body parts: = 'settings' use = "literal" / >

< / output >

< / operation >

< / binding >

< service name = "GET_ROWSService" >

< documentation > Oracle Web Service < / documentation >

< name of port = "GET_ROWSPort" binding = "tns:GET_ROWSBinding" >

" < soap: address location = ' http://server.domain.ch:8080 / orawsv/TEST/TEST_PKG/GET_ROWS "/>

< / port >

< / service >

< / definitions >

-- -------------------------------------------------------------------------------------------------------------

Any suspicion that how create and access pl sql web service returning multiple lines?

I use java not and do not have access to tools such as JDeveloper.

Thank you!

The real problem is that collection types are not supported for the return parameters.

The solution is to wrap the collection into another object.

Here is an example of work based on your settings:

CREATE OR REPLACE TYPE test_rec is OBJECT (
  empno  number(4)
, ename  varchar2(10)
, hiredate date
);
/

CREATE OR REPLACE TYPE test_array AS TABLE OF test_rec;
/  

CREATE OR REPLACE TYPE test_array_wrapper is OBJECT ( arr test_array );
/

CREATE OR REPLACE PACKAGE test_pkg AS
  function get_rows(p_deptno in number) return test_array_wrapper;
END;
/  

CREATE OR REPLACE PACKAGE BODY test_pkg AS
  function get_rows(p_deptno in number) return test_array_wrapper is
    results  test_array;
  begin  

    select test_rec(empno, ename, hiredate)
    bulk collect into results
    from scott.emp
    where deptno = p_deptno;     

    return test_array_wrapper(results);
  end;
END;
/

The wsdl is then generated correctly:

SQL> select httpuritype('http://DEV:dev@localhost:8080/orawsv/DEV/TEST_PKG/GET_ROWS?wsdl').getxml() from dual;

HTTPURITYPE('HTTP://DEV:DEV@LOCALHOST:8080/ORAWSV/DEV/TEST_PKG/GET_ROWS?WSDL').GETXML()
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  
    
      
        
          
            
          
        
      
      
        
          
            
          
        
      
      
        
          
            
              
                
                  
                    
                      
                    
                  
                
              
            
          
        
      
      
        
          
          
            
              
                
              
            
          
          
        
      
    
  
  
    
  
  
    
  
  
    
      
      
    
  
  
    
    
      
      
        
      
      
        
      
    
  
  
    Oracle Web Service

Add multiple records using the UTL file

Hi, I have rarely treat PLSQL so any help would be greatly appreciated.
I need to run a query that selects all instances where the status of a column table
is equal to true and then write this to a file on the operating system. It is fine if there is only a single disc, but often, there will be multiple records.
My script file UTL to process 1 plug is as below:

DECLARE
L_HANDLER UTL_FILE. TYPE_DE_FICHIER;
vData VARCHAR2 (85);

BEGIN

SELECT THE STATE
IN vDATA
Of error_table;
L_HANDLER: = UTL_FILE. FOPEN ('MYDIR', 'error.txt', 'W');
UTL_FILE. PUTF (L_HANDLER, VDATA);
UTL_FILE. FCLOSE (L_HANDLER);
END;

Thank you very much
Adam

Hi, Adam.

One way is like this:

DECLARE

L_HANDLER UTL_FILE. TYPE_DE_FICHIER;

BEGIN

L_HANDLER: = UTL_FILE. FOPEN ("MYDIR", "error.txt', 'W');

FOR (IN) r

SELECT THE STATE

Of error_table

)

LOOP

UTL_FILE. PUTF (L_HANDLER, r.status);

END LOOP;

UTL_FILE. FCLOSE (L_HANDLER);

END;

There are more effective ways, but they are much more complicated.

Can I have multiple records of ra_interface_distributions_all against a ra_interface_lines_all record?

Hello!
Can I have multiple records of ra_interface_distributions_all against a ra_interface_lines_all record?
Thank you.

I was able to create multiple lines of distribution for a command line. Just ensure that the total amount or the total percentage of distribution lines is equal to the amount of the line or per cent = 100. You use either amount or percentage based on what is found on the source of the transaction-> account assignment of revenues.

Create multiple records to domain name full esxi

When you configure vsphere, we configured esxi to have multiple mgmt vmkernel ports. When configuring dns, are there problems with having multiple records a for that host name?
example of dns configuration:
ESXi-1 in a 10.1.1.1
ESXi-1 in a 10.2.2.1
Thank you
Scott

Yes we do .plz find command to add route to vmkernel port

vicfg - route.pl - a 192.NNN.100.0 255.255.255.0 192.NNN.0.1

Adds an entry to the road to 192.NNN.100.0 network through 192.NNN.0.1

For more information Please reffer page 34 of vSphere command-line Interface

Installation and reference Guide

concerning

Maniac

OpenScript with the eBusiness R11i question-error occurred in the recorder forms LT
Hello
When I try to save (load test script) on the application of E-Business Suite R11i, Openscript gives the popup of error following during the launch of forms from within the E-Business application.

Error occurred in the recorder forms LT

When I finished the recording, I have noticed that some people form are saved.

How can I solve this?

Manually, I can access the Forms page and perform actions.

I understand that this is due to Jinitiator and Java versions on my laptop. But I can't solve the problem.

Concerning
CP

Published by: cprusty on October 25, 2011 05:26

Published by: cprusty on October 27, 2011 07:34
Hi CP.

I had a quick glance at this and have successfully recorded a script. You must enable the Force HTTP check in tools-> preferences-> registration-> Oracle EBS/forms load OpenScript. Then save your script - you should be good to go.

See you soon,.
Jamie

fetch multiple records form

Similar Questions

Maybe you are looking for