Fields in forms on several layers

Similar Questions

• I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. How can I fix?

  I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. Can I fix?

  I am fairly new to this, but I think it has to do with the way you have drop them downs named. Copy you a then keep stick in each area? If so, that's the problem. You must rename each with a different number: Dropdown1, Dropdown2, etc. I think this might solve the problem.

• Simultaneously select several layers and sous-calques

  Hello

  I'll have to select several layers and their Undercoats in Illustrator 2014, but sticking to the procedure described in the post below only lets you select several "main layers" with the left sublayer deselected.

  Re: Is it possible to select more than one layer by selecting the first and the last layers?

  Could someone please explain how the layers and sous-calques can be selected in the layers panel?

  In Illustrator, make more and more confused about the layer control...

  Thank you in advance,

  EAD

  That would be nice.

  Looks like a candidate for a feature request:

  Adobe - feature request/Bug Report Form

• Import Illustrator file with several layers and sublayers as composition by keeping all layers and sous-calques

  I drew a map of the country with several layers and sous-calques, including the streets, cities, railroads...

  Now, I want to create a template for my colleagues in After Effects.

  To do this, I want to import the AI in After Effects, holding all sublayers and layers in compositions and subcompositions.

  When I do, I get the first two layers correctly, others just in a merged publication.

  What can I do to get all the layers of each as a layer in After Effects?

  Best regards, Raphael

  Illustrator imports only the first level of the layers. If you have groups or paths below you must release layer groups. The layers will then be stacked in the order in the form of layers. Then you need to move them to the top.

  The procedure is to select a layer in the layer Illustrator Panel, then without selecting any which specific element in the layer click on the menu in the upper right corner and select release to layers. All an elements in this layer will be transformed into layers. Now, select all, and drag them to the top above the original layer. This will leave the empty original layer and put all the elements in new layers.

  Here is a tutorial I made there are a bunch of years and who uses this technique to transform a mixture in a morphing.

  Morphing with Adobe Illustrator. I hope this helps.

• Hidden field in form with the url of the page value

  Hello world of Dreamweaver,

  Just a quick question im stuck on.

  I have created a simple form name, Email and Message. The problem is I want to use the same form on several different pages, but being able to say what the URL of the form was sent from. I see I want a hidden field in the form, but how could I go all that actually send the URL with the other information?

  Thanks in advance!

  Do better on the server side (ColdFusion, ASP, PHP, etc.).   In ColdFusion, you can use #cgi.script_name # to get the name of the document that contains the form.

  However, you can use JavaScript (not as reliable - esp if the user has JS disabled.)

  Location.href or document. URL will take the path of COMPLETE domain including the name of the document.  Don't forget to access the page via the domain name FULL or http://localhost or http://127.0.0.1.  If access you it via file:\\\C:\path\to\document.htm, so I don't know how this will work.

  ^_^

• 2 fields of form in a DB entry

  I apologize in advance if this question has been asked and answered many times. I'm new on this and extremely frustrated because I continue to bog down.

  I use Dreamweaver to create a Web site with Coldfusion as the server. I use Quickbooks and QODBC to use the DB to integrate cf.

  I created a form with several fields of all text entries. I was able to get all the information to display in my database correctly. However, my question is I want to create a multiple entry that would combine the two form fields in a column in the database table. For example I first name and last name in the form of form fields when the user submits I want to both get into their columns in the table, but also combine into a single entry in the format name in a FULL NAME column of the table. Is it possible if yes, how? Thanks in advance.

  Hello

  In the first query, where is a comma to separate values. ??? This is the problem I think.

  This is how your code should be.

  1. define the values in variables.

  2. use the variables inside your CFQUERYPARAM

  Please fill out the maxlength and cfsqltype therefore, also in your first query, billaddressAddr1 is missing (check also); In the query, I added.
  

  INSERT INTO customer (name, LastName, FullName, BillAddressAddr1, BillAddressAddr2, BillAddressCity, BillAddressState, BillAddressPostalCode)

  VALUES)

  ,

  ,

  ,

  ,

  ,

  ,

  ,

  )

  I hope it will work...

• The fields of form on some sites don't is loading not in sea Monkey 2.3 but in IE.

  Just moved in to a workstation with Windows 7 and Sea Monkey 2.3, and since then, fields of form on the site, I was able to access in the past (UPS, MCI sites and vendor) are not visible. Models of web pages will load, but the entry fields that appear, so that their legends that accompanies it, do not. I can't go to IE and sites annoying loading very well, but I'd rather spend in sea Monkey where are all my modules and pssrds.

  Please update Seamonkey 2.20. http://www.SeaMonkey-project.org/releases/seamonkey2.20/

  In addition, it is a Firefox support forum, not a forum for seamonkey

• Management of several layers at the same point

  Hello

  I use the API in my application and Javacript Mapviewer, more than one layer can be established at the same point. I use MVThemeBasedFOI. If you click on this point, I want to give the possibly to choose which layer you want. Now when I have several layers, only the last can be clicked. Is there a way to solve it?

  MVThemeBasedFOI.setBringToTopOnMouseOver (boolean).   I found this method, but how do I access all layers when I click on a point?

  Thanks for help.

  ESC.

  I tried really hard things to fool this behavior. At the end of the search for new features that were not in the documentation, I found this: MVMapView.enableMultiThemeClickable (boolean). They should update the documentation because there are a lot of functions implemented that do not exist.

  Just enable it and it works perfectly!

  mapview.enableMultiThemeClickable (true);

  ESC

• How to merge several layers in one without destroying the layers of origin?

  How to merge several layers in one without destroying the layers of origin?

  joelb2995629 wrote:

  How to merge several layers in one without destroying the layers of origin?

  The solution is a very useful shortcut, but requires a bit of dexterity.

  Of is it: Ctrl + Alt + Shift + e. (Yes, 4 keys at the same time).

  This creates a new layer that is the fusion of visible layers.

  To be on the top layer and don't have ensure that active useful layers.

• Can I extend several layers in the editing Photoshop CC 2015 Panel?

  I am creating a video using a PSD with more than 80 layers, I can choose several layers in the timeline panel, but when I try to drag to lengthen it just drag one of them all...

  Is that possible or I really need to drag one by one (cause it is REALLY bad)

  Hi Iskander1989

  The only way I remember just made one at a time.

  Also tried again here so yes need to drag one by one.

  ~ Jitendra

• Apply the filter at several layers at the same time (without converting them to a CG)

  Hey everybody,

  I looked everywhere for a way to simply apply the same filter with several layers at once, without first convert to smart object. I need to keep my layers intact and separated from the others. Does anyone know of a script or a way to do this?

  Any response is appreciated.

  -Andy

  Paul has a script "Filter selected Layers" on the site that makes the most of the filters.

  It's at the bottom of the "CSP Scripts" section.

  http://www.PS-Bridge-scripts.TalkTalk.NET/

• Need help to count the characters in several layers of text

  I use following code to count the number of characters and words in a single text layer. Is it possible to count the number of characters and words in a several layers of text. ?? Help, please

  Java Script code:

  //

  /*

  < javascriptresource >

  < name > Count words and characters < / name >

  < / javascriptresource >

  */

  function run()

  {

  var layer = activeDocument.activeLayer;

  If (layer.kind is LayerKind.TEXT)

  {

  Var words = layer.textItem.contents;

  Words = words.replace (/ (\r\n|\n|\r) "/ gm," "");

  var countwords = words.split("").length;

  var compteLettres is words.split("").join("") .length;.

  Alert ("\n" + countwords + "Words\n" + compteLettres + "Characters", "Count");

  }

  on the other

  {

  Alert ("select a layer of text.', 'Count');

  }

  }

  Run();

  2015, use it at your own risk.

  #target "photoshop - 70.032»

  If (app.documents.length > 0) {}

  var theTexts = main();

  alert (count (theTexts.join ("\n")));

  };

  ////////////////////////////////////

  int main() {}

  the file;

  myDocument var = app.activeDocument;

  get the number of layers;

  Var ref = new ActionReference();

  ref.putEnumerated (charIDToTypeID ("Dcmn"), charIDToTypeID ("Ordn"), charIDToTypeID ("Trgt"));

  var applicationDesc = executeActionGet (ref);

  var number = applicationDesc.getInteger (stringIDToTypeID ("numberOfLayers"));

  treat the layers;

  var theLayers = new Array;

  for (var m = 0; m<= thenumber;="" m++)="">

  try {}

  Var ref = new ActionReference();

  ref.putIndex (charIDToTypeID ("Lyr"), m);

  var layerDesc = executeActionGet (ref);

  var layerSet is typeIDToStringID (layerDesc.getEnumerationValue (stringIDToTypeID ("layerSection")));.

  isBackground var = layerDesc.getBoolean (stringIDToTypeID ('background'));

  otherwise the layer group.

  If (layerSet! = "layerSectionEnd" & layerSet! = "layerSectionStart" & isBackground! = true) {}

  theName var = layerDesc.getString (stringIDToTypeID ('name'));

  theID var = layerDesc.getInteger (stringIDToTypeID ('layerID'));

  var hasText = layerDesc.hasKey (stringIDToTypeID ("textKey"));

  If the layer type;

  If (hasText == true) {}

  var textDesc = layerDesc.getObjectValue (stringIDToTypeID ('textKey'));

  Letexte var = textDesc.getString (stringIDToTypeID ("textKey"));

  theLayers.push (theText)

  }

  }

  }

  catch (e) {};

  };

  return theLayers

  };

  Count characters.

  function count (theString) {}

  Var words = theString//layer.textItem.contents;

  Words = words.replace (/ (\r\n|\n|\r) "/ gm," "");

  ////////////////////////////////////

  Remove double spaces and space at the end;

  While (words.indexOf("")! = - 1) {words = words.replace ("","")};

  spaces var end = \s$/;

  Words = words.replace (spaces, "");

  ////////////////////////////////////

  var countwords = words.split("").length;

  var compteLettres is words.split("").join("") .length;.

  return ("\n" + countwords + 'Words\n' + compteLettres + 'Characters');

  };

• Capture several layers of application on a virtual machine

  Another newbee question. I'm following the VMware Horizon Mirage App layer v4.0 capture guidelines on page 9 where he describes the process if you are going to use a virtual machine, so you can capture several layers of app. I followed steps 1 - create own reference machine, install Client Mirage and centralize the unit to a CVD of reference; 2 take a snapshot of the State of cleanliness; 3. in the MMC, use the launch App layer Capture (actually called Capture App layer in the commune of assistants, unless I'm mistaken) option... Here's where I hit a roadblock. Unit is a CVD of reference, the wizard takes me to select from pending devices, and I can't access the device but it is located in the area of reference CVD. The virtual machine itself also appears in Devices.Do assigned I must withdraw from somewhere? I'm confused !

  To capture an application tier, you must have 'reference' machine in a wait state. To capture a base layer, you must have the machine of 'reference' centralized as a reference machine. It's a little confusing. You can use the same machine to capture both types of layers. You can remove the reference CVD of inventory and it will appear in the expectation of devices.

• Script to connect several layers to one layer draw

  I'm trying to bind several layers to one layer no animated but I want each layer to start the animation layer from time.

  What would be the script that I need to add instead of duplicating layer draw for each layers?

  I hope that this question is not too complicated to understand lol

  TIA

  W

  I think you can do it with an expression as follows:

  thisComp.layer("ROTATE").transform.xRotation.valueAtTime (time-inPoint)

  Dan

• How to make all the pages of a PDF form of several page to print in older versions of the reader?  Player 11 prints all; 10 player skips the first page

  I'm new to creating forms, please excuse my ignorance. I created a form of the 9 page in InDesign on Mac OS 10.6.8 CS6 and exported as an interactive PDF. With Acrobat 10.1.10 I checked that there are no security - everything is allowed. None of the fields on form is required.  I initially had some fields mandatory but is not necessary to see if my printing problem would go.  I activated the extension which allows versions of reader before 11 to save data in the form. Page 1 has fields drop down list, radio buttons, a "submit" button and text fields.  The rest of the form has boxes option and text fields. Some of the people who have tried my form will say that they can print pages 2 through 9, but not on page 1. One of them is known to use Reader 10. I tried to print my form with Reader 11 on Max OX 10.6.8 and Reader 11 on Windows 8.1 and haven't seen any problems printing. What have I done wrong?  Is there something on the submit button on page 1 that made old versions of the drive do not want to print this page?  There is nothing of propriety or sensitive on the form, so I'll leave it for awhile in Dropbox, where someone is willing to inspect it.  It is to

  https://DL.dropboxusercontent.com/u/87784382/Savable_Local_Show_Report_2.PDF

  I was able to find someone willing to do tests that I can not do without having to install older versions of the player on my computer.  The surprising (to me) the result is that the button submit the cause of the problem.  Simply removing the button submit, Reader 10 is now able to print page 1.  The Send button has been implemented to make a 'mailto'.  I don't know if other destinations also cause the issue of the page not print not with older versions of the reader.